! Started logfile: /scr/pima/bg219h_uvs/J1248+4839_X_dfm.log on Thu May 19 22:26:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1248+4839_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1248+4839_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.920072 visibilities/baseline/integration-bin.
! Found source: J1248+4839
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30804 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1248+4839_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004421Jy  sigma=25.211274
! Fit after  self-cal, rms=0.950884Jy  sigma=23.840449
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8127 mas, bmaj=0.9904 mas, bpa=-5.189 degrees
! Estimated noise=0.39404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0368211 Jy
! Component: 100  -  total flux cleaned = 0.0464425 Jy
! Total flux subtracted in 100 components = 0.0464425 Jy
! Clean residual min=-0.003706 max=0.009185 Jy/beam
! Clean residual mean=0.000004 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.0464425 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0464425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064810Jy  sigma=1.479785
! Fit after  self-cal, rms=0.063584Jy  sigma=1.449012
! Inverting map 
! Added new window around map position (1.4, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00924224 Jy
! Component: 100  -  total flux cleaned = 0.014766 Jy
! Total flux subtracted in 100 components = 0.014766 Jy
! Clean residual min=-0.003018 max=0.003482 Jy/beam
! Clean residual mean=0.000003 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.0612085 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.0612085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061849Jy  sigma=1.398078
! Fit after  self-cal, rms=0.061593Jy  sigma=1.392476
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00543686 Jy
! Component: 100  -  total flux cleaned = 0.00873631 Jy
! Total flux subtracted in 100 components = 0.00873631 Jy
! Clean residual min=-0.002747 max=0.002678 Jy/beam
! Clean residual mean=0.000001 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.0699448 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.0699448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061003Jy  sigma=1.375527
! Fit after  self-cal, rms=0.060906Jy  sigma=1.373643
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.083 mas, bmaj=1.293 mas, bpa=-2.944 degrees
! Estimated noise=0.174152 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036645 Jy
! Component: 100  -  total flux cleaned = 0.00542381 Jy
! Component: 150  -  total flux cleaned = 0.00642238 Jy
! Component: 200  -  total flux cleaned = 0.00689068 Jy
! Total flux subtracted in 200 components = 0.00689068 Jy
! Clean residual min=-0.001257 max=0.001367 Jy/beam
! Clean residual mean=-0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0768355 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 34 components and 0.0768355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060694Jy  sigma=1.367931
! Fit after  self-cal, rms=0.060620Jy  sigma=1.366576
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.083 x 1.293 at -2.944 degrees (North through East)
! Clean map  min=-0.0010964  max=0.049228 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.90     KP        0.99     
!   LA        0.95     MK        1.14     NL        1.10     OV        1.04     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        0.92     KP        1.02     
!   LA        1.04     MK        1.08     NL        1.01     OV        1.00     
!   PT        1.02     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.06     KP        1.00     
!   LA        1.05     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.94     KP        1.00     
!   LA        0.97     MK        1.05     NL        1.07     OV        1.05     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.90     KP        1.04     
!   LA        0.99     MK        0.98     NL        0.97     OV        1.05     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.02     KP        1.01     
!   LA        0.98     MK        1.05     NL        1.05     OV        1.04     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     HN        0.88     KP        1.00     
!   LA        0.98     MK        0.97     NL        0.99     OV        1.05     
!   PT        1.03     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        0.92     KP        0.98     
!   LA        1.04     MK        1.01     NL        1.05     OV        1.00     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.83     KP        1.06     
!   LA        1.00     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        0.93     KP        1.03     
!   LA        0.94     MK        1.02     NL        0.98     OV        1.03     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.86     KP        1.09     
!   LA        0.91     MK        0.98     NL        0.98     OV        1.05     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.94     HN        0.89     KP        1.04     
!   LA        0.93     MK        1.02     NL        0.98     OV        1.04     
!   PT        1.04     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.060620Jy  sigma=1.366576
! Fit after  self-cal, rms=0.058237Jy  sigma=1.363567
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.08 mas, bmaj=1.288 mas, bpa=-1.649 degrees
! Estimated noise=0.171768 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000842928 Jy
! Component: 100  -  total flux cleaned = 0.000812016 Jy
! Component: 150  -  total flux cleaned = 0.000749588 Jy
! Component: 200  -  total flux cleaned = 0.00070158 Jy
! Total flux subtracted in 200 components = 0.00070158 Jy
! Clean residual min=-0.001107 max=0.001095 Jy/beam
! Clean residual mean=-0.000002 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0775371 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 40 components and 0.0775371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058201Jy  sigma=1.362737
! Fit after  self-cal, rms=0.058161Jy  sigma=1.362083
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058161Jy  sigma=1.362083
! Fit after  self-cal, rms=0.058309Jy  sigma=1.360216
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=1.286 mas, bpa=-0.8467 degrees
! Estimated noise=0.171324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000484231 Jy
! Component: 100  -  total flux cleaned = 0.000464846 Jy
! Component: 150  -  total flux cleaned = 0.000451732 Jy
! Component: 200  -  total flux cleaned = 0.000404442 Jy
! Total flux subtracted in 200 components = 0.000404442 Jy
! Clean residual min=-0.001051 max=0.001001 Jy/beam
! Clean residual mean=-0.000002 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0779415 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.0779415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058294Jy  sigma=1.359860
! Fit after  self-cal, rms=0.058312Jy  sigma=1.359622
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.39968e-05 Jy
! Component: 100  -  total flux cleaned = 2.49256e-05 Jy
! Component: 150  -  total flux cleaned = 6.46538e-06 Jy
! Component: 200  -  total flux cleaned = -1.00029e-05 Jy
! Total flux subtracted in 200 components = -1.00029e-05 Jy
! Clean residual min=-0.001041 max=0.000978 Jy/beam
! Clean residual mean=-0.000002 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0779315 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.0779315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058306Jy  sigma=1.359479
! Fit after  self-cal, rms=0.058305Jy  sigma=1.359431
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058305Jy  sigma=1.359431
! Fit after  self-cal, rms=0.058004Jy  sigma=1.359361
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.075 mas, bmaj=1.287 mas, bpa=-1.121 degrees
! Estimated noise=0.170878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193874 Jy
! Component: 100  -  total flux cleaned = 0.000193133 Jy
! Component: 150  -  total flux cleaned = 0.00019382 Jy
! Component: 200  -  total flux cleaned = 0.000193718 Jy
! Total flux subtracted in 200 components = 0.000193718 Jy
! Clean residual min=-0.001018 max=0.000921 Jy/beam
! Clean residual mean=-0.000002 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0781252 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.0781252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057999Jy  sigma=1.359255
! Fit after  self-cal, rms=0.058000Jy  sigma=1.359215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.82432e-05 Jy
! Component: 100  -  total flux cleaned = 3.4636e-05 Jy
! Component: 150  -  total flux cleaned = 4.19262e-05 Jy
! Component: 200  -  total flux cleaned = 4.22026e-05 Jy
! Total flux subtracted in 200 components = 4.22026e-05 Jy
! Clean residual min=-0.001012 max=0.000919 Jy/beam
! Clean residual mean=-0.000002 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0781674 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.0781674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057997Jy  sigma=1.359157
! Fit after  self-cal, rms=0.057994Jy  sigma=1.359104
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057994Jy  sigma=1.359104
! Fit after  self-cal, rms=0.057780Jy  sigma=1.359078
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.232 mas, bmaj=2.426 mas, bpa=7.474 degrees
! Estimated noise=0.212981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.88429e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103808 Jy
! Component: 150  -  total flux cleaned = 0.000115047 Jy
! Component: 200  -  total flux cleaned = 0.000114843 Jy
! Total flux subtracted in 200 components = 0.000114843 Jy
! Clean residual min=-0.000881 max=0.000901 Jy/beam
! Clean residual mean=-0.000003 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0782823 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 57 components and 0.0782823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057779Jy  sigma=1.359050
! Fit after  self-cal, rms=0.057777Jy  sigma=1.359015
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.11306e-05 Jy
! Component: 100  -  total flux cleaned = -5.96607e-06 Jy
! Component: 150  -  total flux cleaned = -9.1767e-07 Jy
! Component: 200  -  total flux cleaned = 2.64639e-06 Jy
! Total flux subtracted in 200 components = 2.64639e-06 Jy
! Clean residual min=-0.000887 max=0.000903 Jy/beam
! Clean residual mean=-0.000003 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0782849 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 61 components and 0.0782849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057776Jy  sigma=1.359009
! Fit after  self-cal, rms=0.057776Jy  sigma=1.358988
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=1.287 mas, bpa=-1.285 degrees
! Estimated noise=0.170555 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.073 x 1.287 at -1.285 degrees (North through East)
! Clean map  min=-0.00089333  max=0.048015 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8098 mas, bmaj=0.9878 mas, bpa=-4.054 degrees
! Estimated noise=0.383712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0371747 Jy
! Component: 100  -  total flux cleaned = 0.0519147 Jy
! Component: 150  -  total flux cleaned = 0.0605304 Jy
! Component: 200  -  total flux cleaned = 0.0662122 Jy
! Total flux subtracted in 200 components = 0.0662122 Jy
! Clean residual min=-0.003472 max=0.003343 Jy/beam
! Clean residual mean=0.000002 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.0662121 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0662121 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=1.287 mas, bpa=-1.285 degrees
! Estimated noise=0.170555 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00526595 Jy
! Component: 100  -  total flux cleaned = 0.00817251 Jy
! Component: 150  -  total flux cleaned = 0.00994512 Jy
! Component: 200  -  total flux cleaned = 0.0107067 Jy
! Total flux subtracted in 200 components = 0.0107067 Jy
! Clean residual min=-0.001065 max=0.000905 Jy/beam
! Clean residual mean=-0.000001 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0769188 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 36 components and 0.0769188 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.232 mas, bmaj=2.426 mas, bpa=7.474 degrees
! Estimated noise=0.212981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100467 Jy
! Component: 100  -  total flux cleaned = 0.00110408 Jy
! Component: 150  -  total flux cleaned = 0.0011915 Jy
! Component: 200  -  total flux cleaned = 0.00124696 Jy
! Total flux subtracted in 200 components = 0.00124696 Jy
! Clean residual min=-0.000928 max=0.000920 Jy/beam
! Clean residual mean=-0.000003 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0781658 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.34186e-05 Jy
! Component: 100  -  total flux cleaned = 7.0891e-05 Jy
! Component: 150  -  total flux cleaned = 9.40652e-05 Jy
! Component: 200  -  total flux cleaned = 0.00011352 Jy
! Total flux subtracted in 200 components = 0.00011352 Jy
! Clean residual min=-0.000912 max=0.000908 Jy/beam
! Clean residual mean=-0.000003 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.0782793 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 57 components and 0.0782793 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=1.287 mas, bpa=-1.285 degrees
! Estimated noise=0.170555 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012953 Jy
! Component: 100  -  total flux cleaned = 0.000100514 Jy
! Component: 150  -  total flux cleaned = 7.64374e-05 Jy
! Component: 200  -  total flux cleaned = 6.53933e-05 Jy
! Total flux subtracted in 200 components = 6.53933e-05 Jy
! Clean residual min=-0.000971 max=0.000920 Jy/beam
! Clean residual mean=-0.000002 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0783447 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.0783447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057782Jy  sigma=1.359166
! Fit after  self-cal, rms=0.057777Jy  sigma=1.359050
wmodel /J1248+4839_X_map.mod
! wmodel: Unable to open new model file: /J1248+4839_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1248+4839_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.073 x 1.287 at -1.285 degrees (North through East)
! Clean map  min=-0.00087479  max=0.047948 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1248+4839_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0479478 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000213466 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.33562 1.33562 2.67123 5.34247 10.6849 21.3699 42.7398 85.4795
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.047 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  224.615 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1248+4839_X_dfm.log closed on Thu May 19 22:26:22 2016