! Started logfile: /scr/pima/bg219h_uvs/J1224+4335_S_uvs.log on Thu Apr  7 09:02:49 2016
obs /scr/pima/bg219h_uvs/J1224+4335_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1224+4335_S_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.712346 visibilities/baseline/integration-bin.
! Found source: J1224+4335
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4616 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1224+4335_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014772Jy  sigma=25.056590
! Fit after  self-cal, rms=0.805772Jy  sigma=19.974719
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.366 mas, bmaj=4.232 mas, bpa=-0.5402 degrees
! Estimated noise=0.729251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15023 Jy
! Component: 100  -  total flux cleaned = 0.188947 Jy
! Total flux subtracted in 100 components = 0.188947 Jy
! Clean residual min=-0.007100 max=0.014956 Jy/beam
! Clean residual mean=0.000016 rms=0.001880 Jy/beam
! Combined flux in latest and established models = 0.188947 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.188947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063307Jy  sigma=1.488116
! Fit after  self-cal, rms=0.063269Jy  sigma=1.487635
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152545 Jy
! Component: 100  -  total flux cleaned = 0.0223074 Jy
! Total flux subtracted in 100 components = 0.0223074 Jy
! Clean residual min=-0.005366 max=0.007505 Jy/beam
! Clean residual mean=0.000008 rms=0.001290 Jy/beam
! Combined flux in latest and established models = 0.211254 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 18 components and 0.211254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059725Jy  sigma=1.395692
! Fit after  self-cal, rms=0.059690Jy  sigma=1.395064
! Inverting map 
! Added new window around map position (1.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0061884 Jy
! Component: 100  -  total flux cleaned = 0.00807848 Jy
! Total flux subtracted in 100 components = 0.00807848 Jy
! Clean residual min=-0.004864 max=0.004833 Jy/beam
! Clean residual mean=0.000008 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.219333 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.219333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058844Jy  sigma=1.370097
! Fit after  self-cal, rms=0.058775Jy  sigma=1.368548
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.058 mas, bmaj=5.118 mas, bpa=-9.277 degrees
! Estimated noise=0.465718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427225 Jy
! Component: 100  -  total flux cleaned = 0.00520675 Jy
! Component: 150  -  total flux cleaned = 0.00553751 Jy
! Component: 200  -  total flux cleaned = 0.00585993 Jy
! Total flux subtracted in 200 components = 0.00585993 Jy
! Clean residual min=-0.003790 max=0.004071 Jy/beam
! Clean residual mean=0.000011 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.225192 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 48 components and 0.225192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058409Jy  sigma=1.354474
! Fit after  self-cal, rms=0.058379Jy  sigma=1.353435
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.058 x 5.118 at -9.277 degrees (North through East)
! Clean map  min=-0.0034441  max=0.19214 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00*    HN        0.97     KP        1.00     
!   LA        0.98     MK        1.02     NL        0.98     OV        1.00     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        0.99     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.10     OV        0.99     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        0.98     KP        0.99     
!   LA        0.99     MK        0.97     NL        1.17     OV        0.96     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        0.98     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.058379Jy  sigma=1.353435
! Fit after  self-cal, rms=0.057845Jy  sigma=1.331123
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.055 mas, bmaj=5.114 mas, bpa=-8.998 degrees
! Estimated noise=0.463954 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000564275 Jy
! Component: 100  -  total flux cleaned = 0.000603914 Jy
! Component: 150  -  total flux cleaned = 0.000601154 Jy
! Component: 200  -  total flux cleaned = 0.000632712 Jy
! Total flux subtracted in 200 components = 0.000632712 Jy
! Clean residual min=-0.003957 max=0.003417 Jy/beam
! Clean residual mean=0.000008 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.225825 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.225825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057793Jy  sigma=1.329485
! Fit after  self-cal, rms=0.057784Jy  sigma=1.329219
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057784Jy  sigma=1.329219
! Fit after  self-cal, rms=0.057571Jy  sigma=1.318215
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.051 mas, bmaj=5.107 mas, bpa=-9.439 degrees
! Estimated noise=0.463533 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000410316 Jy
! Component: 100  -  total flux cleaned = 0.000348956 Jy
! Component: 150  -  total flux cleaned = 0.000348022 Jy
! Component: 200  -  total flux cleaned = 0.000320491 Jy
! Total flux subtracted in 200 components = 0.000320491 Jy
! Clean residual min=-0.002882 max=0.002749 Jy/beam
! Clean residual mean=0.000008 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.226146 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 0.226146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057540Jy  sigma=1.317505
! Fit after  self-cal, rms=0.057547Jy  sigma=1.317393
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.58403e-05 Jy
! Component: 100  -  total flux cleaned = -7.0782e-05 Jy
! Component: 150  -  total flux cleaned = -9.24091e-05 Jy
! Component: 200  -  total flux cleaned = -5.11227e-05 Jy
! Total flux subtracted in 200 components = -5.11227e-05 Jy
! Clean residual min=-0.002852 max=0.002689 Jy/beam
! Clean residual mean=0.000008 rms=0.000745 Jy/beam
! Combined flux in latest and established models = 0.226095 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 69 components and 0.226095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057530Jy  sigma=1.317007
! Fit after  self-cal, rms=0.057532Jy  sigma=1.316972
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057532Jy  sigma=1.316972
! Fit after  self-cal, rms=0.057529Jy  sigma=1.316858
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.05 mas, bmaj=5.101 mas, bpa=-9.81 degrees
! Estimated noise=0.463447 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130785 Jy
! Component: 100  -  total flux cleaned = 8.43496e-05 Jy
! Component: 150  -  total flux cleaned = 6.23306e-05 Jy
! Component: 200  -  total flux cleaned = 6.06758e-05 Jy
! Total flux subtracted in 200 components = 6.06758e-05 Jy
! Clean residual min=-0.002830 max=0.002683 Jy/beam
! Clean residual mean=0.000008 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.226155 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.226155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057512Jy  sigma=1.316495
! Fit after  self-cal, rms=0.057514Jy  sigma=1.316454
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.67562e-05 Jy
! Component: 100  -  total flux cleaned = -7.65603e-05 Jy
! Component: 150  -  total flux cleaned = -4.26808e-05 Jy
! Component: 200  -  total flux cleaned = -2.69007e-05 Jy
! Total flux subtracted in 200 components = -2.69007e-05 Jy
! Clean residual min=-0.002807 max=0.002655 Jy/beam
! Clean residual mean=0.000008 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.226128 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.226128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057504Jy  sigma=1.316212
! Fit after  self-cal, rms=0.057505Jy  sigma=1.316191
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057505Jy  sigma=1.316191
! Fit after  self-cal, rms=0.057514Jy  sigma=1.316122
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.666 mas, bmaj=8.642 mas, bpa=2.331 degrees
! Estimated noise=0.569118 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000412262 Jy
! Component: 100  -  total flux cleaned = 0.000431506 Jy
! Component: 150  -  total flux cleaned = 0.000448014 Jy
! Component: 200  -  total flux cleaned = 0.00043417 Jy
! Total flux subtracted in 200 components = 0.00043417 Jy
! Clean residual min=-0.003564 max=0.003279 Jy/beam
! Clean residual mean=0.000017 rms=0.000899 Jy/beam
! Combined flux in latest and established models = 0.226562 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 80 components and 0.226562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057513Jy  sigma=1.316029
! Fit after  self-cal, rms=0.057514Jy  sigma=1.316013
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.18448e-05 Jy
! Component: 100  -  total flux cleaned = 2.71547e-05 Jy
! Component: 150  -  total flux cleaned = 2.64857e-05 Jy
! Component: 200  -  total flux cleaned = 1.59006e-05 Jy
! Total flux subtracted in 200 components = 1.59006e-05 Jy
! Clean residual min=-0.003573 max=0.003255 Jy/beam
! Clean residual mean=0.000017 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.226578 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 83 components and 0.226578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057516Jy  sigma=1.316069
! Fit after  self-cal, rms=0.057517Jy  sigma=1.316063
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.049 mas, bmaj=5.098 mas, bpa=-10.07 degrees
! Estimated noise=0.463563 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.049 x 5.098 at -10.07 degrees (North through East)
! Clean map  min=-0.0027173  max=0.19151 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.371 mas, bmaj=4.22 mas, bpa=-1.294 degrees
! Estimated noise=0.723266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.148862 Jy
! Component: 100  -  total flux cleaned = 0.187999 Jy
! Component: 150  -  total flux cleaned = 0.204575 Jy
! Component: 200  -  total flux cleaned = 0.213435 Jy
! Total flux subtracted in 200 components = 0.213435 Jy
! Clean residual min=-0.004761 max=0.004616 Jy/beam
! Clean residual mean=0.000006 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.213435 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.213435 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.049 mas, bmaj=5.098 mas, bpa=-10.07 degrees
! Estimated noise=0.463563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00709292 Jy
! Component: 100  -  total flux cleaned = 0.0109228 Jy
! Component: 150  -  total flux cleaned = 0.0116621 Jy
! Component: 200  -  total flux cleaned = 0.0121809 Jy
! Total flux subtracted in 200 components = 0.0121809 Jy
! Clean residual min=-0.003073 max=0.002747 Jy/beam
! Clean residual mean=0.000008 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.225616 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 39 components and 0.225616 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.666 mas, bmaj=8.642 mas, bpa=2.331 degrees
! Estimated noise=0.569118 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126205 Jy
! Component: 100  -  total flux cleaned = 0.00110073 Jy
! Component: 150  -  total flux cleaned = 0.00114664 Jy
! Component: 200  -  total flux cleaned = 0.00118816 Jy
! Total flux subtracted in 200 components = 0.00118816 Jy
! Clean residual min=-0.003561 max=0.003228 Jy/beam
! Clean residual mean=0.000017 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.226804 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.42273e-08 Jy
! Component: 100  -  total flux cleaned = 1.41063e-07 Jy
! Component: 150  -  total flux cleaned = 1.41768e-06 Jy
! Component: 200  -  total flux cleaned = 1.09904e-06 Jy
! Total flux subtracted in 200 components = 1.09904e-06 Jy
! Clean residual min=-0.003568 max=0.003190 Jy/beam
! Clean residual mean=0.000017 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.226805 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 85 components and 0.226805 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.049 mas, bmaj=5.098 mas, bpa=-10.07 degrees
! Estimated noise=0.463563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000804069 Jy
! Component: 100  -  total flux cleaned = 0.00089206 Jy
! Component: 150  -  total flux cleaned = 0.0009312 Jy
! Component: 200  -  total flux cleaned = 0.000897926 Jy
! Total flux subtracted in 200 components = 0.000897926 Jy
! Clean residual min=-0.002947 max=0.002616 Jy/beam
! Clean residual mean=0.000008 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.227703 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 102 components and 0.227703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057459Jy  sigma=1.315106
! Fit after  self-cal, rms=0.057454Jy  sigma=1.314693
wmodel /scr/pima/bg219h_uvs/J1224+4335_S_map.mod
! Writing 102 model components to file: /scr/pima/bg219h_uvs/J1224+4335_S_map.mod
wobs /scr/pima/bg219h_uvs/J1224+4335_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1224+4335_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J1224+4335_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J1224+4335_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000537191 Jy
! Component: 100  -  total flux cleaned = -0.000672876 Jy
! Component: 150  -  total flux cleaned = -0.000673426 Jy
! Component: 200  -  total flux cleaned = -0.000797874 Jy
! Component: 250  -  total flux cleaned = -0.000877962 Jy
! Component: 300  -  total flux cleaned = -0.00103528 Jy
! Component: 350  -  total flux cleaned = -0.00107332 Jy
! Component: 400  -  total flux cleaned = -0.00129774 Jy
! Component: 450  -  total flux cleaned = -0.00140637 Jy
! Component: 500  -  total flux cleaned = -0.00137031 Jy
! Component: 550  -  total flux cleaned = -0.00151039 Jy
! Component: 600  -  total flux cleaned = -0.00154372 Jy
! Component: 650  -  total flux cleaned = -0.00161044 Jy
! Component: 700  -  total flux cleaned = -0.00141267 Jy
! Component: 750  -  total flux cleaned = -0.00154275 Jy
! Component: 800  -  total flux cleaned = -0.00144713 Jy
! Component: 850  -  total flux cleaned = -0.00141592 Jy
! Component: 900  -  total flux cleaned = -0.00135431 Jy
! Component: 950  -  total flux cleaned = -0.0013542 Jy
! Component: 1000  -  total flux cleaned = -0.00123533 Jy
! Component: 1050  -  total flux cleaned = -0.00126536 Jy
! Component: 1100  -  total flux cleaned = -0.00120765 Jy
! Component: 1150  -  total flux cleaned = -0.00103744 Jy
! Component: 1200  -  total flux cleaned = -0.00109328 Jy
! Component: 1250  -  total flux cleaned = -0.000927952 Jy
! Component: 1300  -  total flux cleaned = -0.00087388 Jy
! Component: 1350  -  total flux cleaned = -0.000793838 Jy
! Component: 1400  -  total flux cleaned = -0.00074108 Jy
! Component: 1450  -  total flux cleaned = -0.000558738 Jy
! Component: 1500  -  total flux cleaned = -0.000481333 Jy
! Component: 1550  -  total flux cleaned = -0.000328838 Jy
! Component: 1600  -  total flux cleaned = -0.00015317 Jy
! Component: 1650  -  total flux cleaned = -2.9772e-05 Jy
! Component: 1700  -  total flux cleaned = 0.000189729 Jy
! Component: 1750  -  total flux cleaned = 0.000262097 Jy
! Component: 1800  -  total flux cleaned = 0.000500805 Jy
! Component: 1850  -  total flux cleaned = 0.000619112 Jy
! Component: 1900  -  total flux cleaned = 0.00075886 Jy
! Component: 1950  -  total flux cleaned = 0.00103495 Jy
! Component: 2000  -  total flux cleaned = 0.00112586 Jy
! Component: 2050  -  total flux cleaned = 0.00126143 Jy
! Component: 2100  -  total flux cleaned = 0.00137294 Jy
! Component: 2150  -  total flux cleaned = 0.00150558 Jy
! Component: 2200  -  total flux cleaned = 0.00170259 Jy
! Component: 2250  -  total flux cleaned = 0.00172412 Jy
! Component: 2300  -  total flux cleaned = 0.00183151 Jy
! Component: 2350  -  total flux cleaned = 0.00191667 Jy
! Component: 2400  -  total flux cleaned = 0.00195875 Jy
! Component: 2450  -  total flux cleaned = 0.00212585 Jy
! Component: 2500  -  total flux cleaned = 0.00220888 Jy
! Component: 2550  -  total flux cleaned = 0.00233192 Jy
! Component: 2600  -  total flux cleaned = 0.00245397 Jy
! Component: 2650  -  total flux cleaned = 0.0025347 Jy
! Component: 2700  -  total flux cleaned = 0.00263448 Jy
! Component: 2750  -  total flux cleaned = 0.00271396 Jy
! Component: 2800  -  total flux cleaned = 0.00281225 Jy
! Component: 2850  -  total flux cleaned = 0.00287099 Jy
! Component: 2900  -  total flux cleaned = 0.00298693 Jy
! Component: 2950  -  total flux cleaned = 0.0030444 Jy
! Component: 3000  -  total flux cleaned = 0.00313956 Jy
! Component: 3050  -  total flux cleaned = 0.00321523 Jy
! Component: 3100  -  total flux cleaned = 0.00332777 Jy
! Component: 3150  -  total flux cleaned = 0.00340224 Jy
! Component: 3200  -  total flux cleaned = 0.00345756 Jy
! Component: 3250  -  total flux cleaned = 0.00354916 Jy
! Component: 3300  -  total flux cleaned = 0.00365808 Jy
! Component: 3350  -  total flux cleaned = 0.00374813 Jy
! Component: 3400  -  total flux cleaned = 0.00376603 Jy
! Component: 3450  -  total flux cleaned = 0.00389042 Jy
! Component: 3500  -  total flux cleaned = 0.00397862 Jy
! Component: 3550  -  total flux cleaned = 0.00403133 Jy
! Component: 3600  -  total flux cleaned = 0.00406624 Jy
! Component: 3650  -  total flux cleaned = 0.0041876 Jy
! Component: 3700  -  total flux cleaned = 0.00423925 Jy
! Component: 3750  -  total flux cleaned = 0.00432478 Jy
! Component: 3800  -  total flux cleaned = 0.00442676 Jy
! Component: 3850  -  total flux cleaned = 0.00449429 Jy
! Component: 3900  -  total flux cleaned = 0.00459488 Jy
! Component: 3950  -  total flux cleaned = 0.0046449 Jy
! Component: 4000  -  total flux cleaned = 0.00474416 Jy
! Component: 4050  -  total flux cleaned = 0.00479349 Jy
! Total flux subtracted in 4096 components = 0.00484264 Jy
! Clean residual min=-0.001116 max=0.000992 Jy/beam
! Clean residual mean=0.000005 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.232546 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 384 components and 0.232546 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1224+4335_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.049 x 5.098 at -10.07 degrees (North through East)
! Clean map  min=-0.002302  max=0.1903 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1224+4335_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.190297 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0002846 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.448666 0.448666 0.897331 1.79466 3.58933 7.17865 14.3573 28.7146 57.4292
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.19 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  668.649 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1224+4335_S_uvs.log closed on Thu Apr  7 09:02:53 2016