! Started logfile: /scr/pima/bg219h_uvs/J1213+1307_X_uvs.log on Thu Apr  7 12:10:23 2016
obs /scr/pima/bg219h_uvs/J1213+1307_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1213+1307_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.88816 visibilities/baseline/integration-bin.
! Found source: J1213+1307
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29256 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1213+1307_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.007974Jy  sigma=26.633888
! Fit after  self-cal, rms=0.930493Jy  sigma=24.565838
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7121 mas, bmaj=1.71 mas, bpa=-3.577 degrees
! Estimated noise=0.386497 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525402 Jy
! Component: 100  -  total flux cleaned = 0.0668734 Jy
! Total flux subtracted in 100 components = 0.0668734 Jy
! Clean residual min=-0.003442 max=0.005923 Jy/beam
! Clean residual mean=-0.000002 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.0668734 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0668734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058495Jy  sigma=1.435125
! Fit after  self-cal, rms=0.057656Jy  sigma=1.413887
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00677928 Jy
! Component: 100  -  total flux cleaned = 0.0099749 Jy
! Total flux subtracted in 100 components = 0.0099749 Jy
! Clean residual min=-0.002617 max=0.003833 Jy/beam
! Clean residual mean=-0.000001 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.0768483 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.0768483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056780Jy  sigma=1.386876
! Fit after  self-cal, rms=0.056783Jy  sigma=1.386686
! Inverting map 
! Added new window around map position (-1.4, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00343458 Jy
! Component: 100  -  total flux cleaned = 0.00543825 Jy
! Total flux subtracted in 100 components = 0.00543825 Jy
! Clean residual min=-0.002220 max=0.002384 Jy/beam
! Clean residual mean=-0.000001 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.0822866 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 24 components and 0.0822866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056555Jy  sigma=1.379572
! Fit after  self-cal, rms=0.056540Jy  sigma=1.379100
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8929 mas, bmaj=2.014 mas, bpa=-0.5157 degrees
! Estimated noise=0.220492 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208931 Jy
! Component: 100  -  total flux cleaned = 0.00334878 Jy
! Component: 150  -  total flux cleaned = 0.00418119 Jy
! Component: 200  -  total flux cleaned = 0.00447569 Jy
! Total flux subtracted in 200 components = 0.00447569 Jy
! Clean residual min=-0.001580 max=0.002113 Jy/beam
! Clean residual mean=-0.000002 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0867623 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 45 components and 0.0867623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056460Jy  sigma=1.376612
! Fit after  self-cal, rms=0.056458Jy  sigma=1.376487
! Inverting map 
! Added new window around map position (-3.8, -5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202431 Jy
! Component: 100  -  total flux cleaned = 0.00310084 Jy
! Component: 150  -  total flux cleaned = 0.00380716 Jy
! Component: 200  -  total flux cleaned = 0.00432425 Jy
! Total flux subtracted in 200 components = 0.00432425 Jy
! Clean residual min=-0.001470 max=0.001276 Jy/beam
! Clean residual mean=-0.000001 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.0910865 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 65 components and 0.0910865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056389Jy  sigma=1.374278
! Fit after  self-cal, rms=0.056380Jy  sigma=1.374031
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8929 x 2.014 at -0.5157 degrees (North through East)
! Clean map  min=-0.0014087  max=0.071131 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.94     KP        0.99     
!   LA        1.02     MK        1.05     NL        0.98     OV        0.98     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.93     KP        0.99     
!   LA        1.02     MK        1.02     NL        1.03     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.96     KP        1.02     
!   LA        0.94     MK        1.03     NL        0.97     OV        1.01     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.96     KP        1.01     
!   LA        0.97     MK        1.00     NL        1.00     OV        1.02     
!   PT        1.00     SC        1.01     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.95     KP        1.03     
!   LA        0.98     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.97     KP        1.04     
!   LA        1.00     MK        1.03     NL        0.99     OV        0.98     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.98     KP        1.01     
!   LA        0.97     MK        0.99     NL        1.02     OV        1.02     
!   PT        1.01     SC        0.98     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056380Jy  sigma=1.374031
! Fit after  self-cal, rms=0.055665Jy  sigma=1.372339
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8938 mas, bmaj=2.015 mas, bpa=-0.4128 degrees
! Estimated noise=0.219531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421644 Jy
! Component: 100  -  total flux cleaned = 0.00052647 Jy
! Component: 150  -  total flux cleaned = 0.000509877 Jy
! Component: 200  -  total flux cleaned = 0.000509704 Jy
! Total flux subtracted in 200 components = 0.000509704 Jy
! Clean residual min=-0.001418 max=0.001179 Jy/beam
! Clean residual mean=-0.000000 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0915962 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 0.0915962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055651Jy  sigma=1.372003
! Fit after  self-cal, rms=0.055648Jy  sigma=1.371919
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055648Jy  sigma=1.371919
! Fit after  self-cal, rms=0.056126Jy  sigma=1.368047
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8922 mas, bmaj=2.021 mas, bpa=-0.4677 degrees
! Estimated noise=0.219358 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.02991e-05 Jy
! Component: 100  -  total flux cleaned = 0.00010918 Jy
! Component: 150  -  total flux cleaned = 0.000174521 Jy
! Component: 200  -  total flux cleaned = 0.000217636 Jy
! Total flux subtracted in 200 components = 0.000217636 Jy
! Clean residual min=-0.001250 max=0.001120 Jy/beam
! Clean residual mean=-0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.0918139 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 93 components and 0.0918139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056115Jy  sigma=1.367775
! Fit after  self-cal, rms=0.056132Jy  sigma=1.367641
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.73376e-05 Jy
! Component: 100  -  total flux cleaned = 1.35602e-05 Jy
! Component: 150  -  total flux cleaned = 1.25568e-06 Jy
! Component: 200  -  total flux cleaned = 1.70428e-06 Jy
! Total flux subtracted in 200 components = 1.70428e-06 Jy
! Clean residual min=-0.001262 max=0.001125 Jy/beam
! Clean residual mean=-0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0918156 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 98 components and 0.0918156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056126Jy  sigma=1.367507
! Fit after  self-cal, rms=0.056125Jy  sigma=1.367498
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056125Jy  sigma=1.367498
! Fit after  self-cal, rms=0.055914Jy  sigma=1.367792
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8925 mas, bmaj=2.022 mas, bpa=-0.384 degrees
! Estimated noise=0.217862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000330475 Jy
! Component: 100  -  total flux cleaned = -0.000331555 Jy
! Component: 150  -  total flux cleaned = -0.000356436 Jy
! Component: 200  -  total flux cleaned = -0.000367996 Jy
! Total flux subtracted in 200 components = -0.000367996 Jy
! Clean residual min=-0.001243 max=0.001131 Jy/beam
! Clean residual mean=-0.000000 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0914476 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 105 components and 0.0914476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055907Jy  sigma=1.367618
! Fit after  self-cal, rms=0.055909Jy  sigma=1.367601
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.77108e-05 Jy
! Component: 100  -  total flux cleaned = -6.71106e-05 Jy
! Component: 150  -  total flux cleaned = -5.65865e-05 Jy
! Component: 200  -  total flux cleaned = -6.63182e-05 Jy
! Total flux subtracted in 200 components = -6.63182e-05 Jy
! Clean residual min=-0.001240 max=0.001134 Jy/beam
! Clean residual mean=-0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0913813 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 108 components and 0.0913813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055905Jy  sigma=1.367514
! Fit after  self-cal, rms=0.055904Jy  sigma=1.367509
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055904Jy  sigma=1.367509
! Fit after  self-cal, rms=0.055643Jy  sigma=1.367585
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.068 mas, bmaj=3.075 mas, bpa=-0.9615 degrees
! Estimated noise=0.273895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000496636 Jy
! Component: 100  -  total flux cleaned = -0.00063605 Jy
! Component: 150  -  total flux cleaned = -0.000701624 Jy
! Component: 200  -  total flux cleaned = -0.000764691 Jy
! Total flux subtracted in 200 components = -0.000764691 Jy
! Clean residual min=-0.001467 max=0.001224 Jy/beam
! Clean residual mean=-0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0906166 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 121 components and 0.0906166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055640Jy  sigma=1.367535
! Fit after  self-cal, rms=0.055639Jy  sigma=1.367526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.00822e-05 Jy
! Component: 100  -  total flux cleaned = -0.00013244 Jy
! Component: 150  -  total flux cleaned = -0.000157957 Jy
! Component: 200  -  total flux cleaned = -0.000175735 Jy
! Total flux subtracted in 200 components = -0.000175735 Jy
! Clean residual min=-0.001454 max=0.001232 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0904409 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 126 components and 0.0904409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055638Jy  sigma=1.367520
! Fit after  self-cal, rms=0.055637Jy  sigma=1.367514
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8926 mas, bmaj=2.023 mas, bpa=-0.3766 degrees
! Estimated noise=0.216703 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8926 x 2.023 at -0.3766 degrees (North through East)
! Clean map  min=-0.0011643  max=0.070067 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7132 mas, bmaj=1.714 mas, bpa=-3.336 degrees
! Estimated noise=0.379662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0519993 Jy
! Component: 100  -  total flux cleaned = 0.0663441 Jy
! Component: 150  -  total flux cleaned = 0.0728942 Jy
! Component: 200  -  total flux cleaned = 0.0768286 Jy
! Total flux subtracted in 200 components = 0.0768286 Jy
! Clean residual min=-0.002337 max=0.002306 Jy/beam
! Clean residual mean=-0.000001 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.0768285 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0768285 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8926 mas, bmaj=2.023 mas, bpa=-0.3766 degrees
! Estimated noise=0.216703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390419 Jy
! Component: 100  -  total flux cleaned = 0.00654104 Jy
! Component: 150  -  total flux cleaned = 0.00848251 Jy
! Component: 200  -  total flux cleaned = 0.00998162 Jy
! Total flux subtracted in 200 components = 0.00998162 Jy
! Clean residual min=-0.001345 max=0.001306 Jy/beam
! Clean residual mean=-0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0868102 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 44 components and 0.0868102 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.068 mas, bmaj=3.075 mas, bpa=-0.9615 degrees
! Estimated noise=0.273895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175443 Jy
! Component: 100  -  total flux cleaned = 0.00274986 Jy
! Component: 150  -  total flux cleaned = 0.0031734 Jy
! Component: 200  -  total flux cleaned = 0.00342126 Jy
! Total flux subtracted in 200 components = 0.00342126 Jy
! Clean residual min=-0.001467 max=0.001275 Jy/beam
! Clean residual mean=-0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0902314 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182433 Jy
! Component: 100  -  total flux cleaned = 0.000331704 Jy
! Component: 150  -  total flux cleaned = 0.000445931 Jy
! Component: 200  -  total flux cleaned = 0.000464213 Jy
! Total flux subtracted in 200 components = 0.000464213 Jy
! Clean residual min=-0.001453 max=0.001244 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0906957 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 77 components and 0.0906957 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8926 mas, bmaj=2.023 mas, bpa=-0.3766 degrees
! Estimated noise=0.216703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197003 Jy
! Component: 100  -  total flux cleaned = -8.24403e-05 Jy
! Component: 150  -  total flux cleaned = -4.48333e-05 Jy
! Component: 200  -  total flux cleaned = 3.93045e-05 Jy
! Total flux subtracted in 200 components = 3.93045e-05 Jy
! Clean residual min=-0.001247 max=0.001137 Jy/beam
! Clean residual mean=-0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.090735 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 97 components and 0.090735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055660Jy  sigma=1.368030
! Fit after  self-cal, rms=0.055658Jy  sigma=1.367961
wmodel /scr/pima/bg219h_uvs/J1213+1307_X_map.mod
! Writing 97 model components to file: /scr/pima/bg219h_uvs/J1213+1307_X_map.mod
wobs /scr/pima/bg219h_uvs/J1213+1307_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1213+1307_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J1213+1307_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J1213+1307_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000224316 Jy
! Component: 100  -  total flux cleaned = -0.000244542 Jy
! Component: 150  -  total flux cleaned = -0.000301706 Jy
! Component: 200  -  total flux cleaned = -0.000337897 Jy
! Component: 250  -  total flux cleaned = -0.000391039 Jy
! Component: 300  -  total flux cleaned = -0.000511384 Jy
! Component: 350  -  total flux cleaned = -0.000527984 Jy
! Component: 400  -  total flux cleaned = -0.0005447 Jy
! Component: 450  -  total flux cleaned = -0.000560992 Jy
! Component: 500  -  total flux cleaned = -0.000607917 Jy
! Component: 550  -  total flux cleaned = -0.0006076 Jy
! Component: 600  -  total flux cleaned = -0.000622629 Jy
! Component: 650  -  total flux cleaned = -0.000622747 Jy
! Component: 700  -  total flux cleaned = -0.000637622 Jy
! Component: 750  -  total flux cleaned = -0.00065205 Jy
! Component: 800  -  total flux cleaned = -0.000637667 Jy
! Component: 850  -  total flux cleaned = -0.000651475 Jy
! Component: 900  -  total flux cleaned = -0.000596 Jy
! Component: 950  -  total flux cleaned = -0.000582098 Jy
! Component: 1000  -  total flux cleaned = -0.000541544 Jy
! Component: 1050  -  total flux cleaned = -0.000515088 Jy
! Component: 1100  -  total flux cleaned = -0.000489141 Jy
! Component: 1150  -  total flux cleaned = -0.000489039 Jy
! Component: 1200  -  total flux cleaned = -0.000425253 Jy
! Component: 1250  -  total flux cleaned = -0.000387527 Jy
! Component: 1300  -  total flux cleaned = -0.000424976 Jy
! Component: 1350  -  total flux cleaned = -0.000363327 Jy
! Component: 1400  -  total flux cleaned = -0.000326692 Jy
! Component: 1450  -  total flux cleaned = -0.000230375 Jy
! Component: 1500  -  total flux cleaned = -0.000230269 Jy
! Component: 1550  -  total flux cleaned = -0.000171562 Jy
! Component: 1600  -  total flux cleaned = -0.000148134 Jy
! Component: 1650  -  total flux cleaned = -7.90166e-05 Jy
! Component: 1700  -  total flux cleaned = -6.77671e-05 Jy
! Component: 1750  -  total flux cleaned = -6.77212e-05 Jy
! Component: 1800  -  total flux cleaned = -3.42581e-05 Jy
! Component: 1850  -  total flux cleaned = -2.32242e-05 Jy
! Component: 1900  -  total flux cleaned = 3.14982e-05 Jy
! Component: 1950  -  total flux cleaned = 8.56676e-05 Jy
! Component: 2000  -  total flux cleaned = 0.000149961 Jy
! Component: 2050  -  total flux cleaned = 0.0001606 Jy
! Component: 2100  -  total flux cleaned = 0.000202665 Jy
! Component: 2150  -  total flux cleaned = 0.00022372 Jy
! Component: 2200  -  total flux cleaned = 0.000254645 Jy
! Component: 2250  -  total flux cleaned = 0.000275135 Jy
! Component: 2300  -  total flux cleaned = 0.000336088 Jy
! Component: 2350  -  total flux cleaned = 0.000396349 Jy
! Component: 2400  -  total flux cleaned = 0.000366368 Jy
! Component: 2450  -  total flux cleaned = 0.000415796 Jy
! Component: 2500  -  total flux cleaned = 0.000415747 Jy
! Component: 2550  -  total flux cleaned = 0.000473945 Jy
! Component: 2600  -  total flux cleaned = 0.000531786 Jy
! Component: 2650  -  total flux cleaned = 0.000541434 Jy
! Component: 2700  -  total flux cleaned = 0.000569863 Jy
! Component: 2750  -  total flux cleaned = 0.000616796 Jy
! Component: 2800  -  total flux cleaned = 0.000635506 Jy
! Component: 2850  -  total flux cleaned = 0.000672564 Jy
! Component: 2900  -  total flux cleaned = 0.000736983 Jy
! Component: 2950  -  total flux cleaned = 0.000746084 Jy
! Component: 3000  -  total flux cleaned = 0.000791533 Jy
! Component: 3050  -  total flux cleaned = 0.000809695 Jy
! Component: 3100  -  total flux cleaned = 0.000872368 Jy
! Component: 3150  -  total flux cleaned = 0.000907942 Jy
! Component: 3200  -  total flux cleaned = 0.000987365 Jy
! Component: 3250  -  total flux cleaned = 0.00100483 Jy
! Component: 3300  -  total flux cleaned = 0.0010136 Jy
! Component: 3350  -  total flux cleaned = 0.00103091 Jy
! Component: 3400  -  total flux cleaned = 0.00109979 Jy
! Component: 3450  -  total flux cleaned = 0.00113394 Jy
! Component: 3500  -  total flux cleaned = 0.00119328 Jy
! Component: 3550  -  total flux cleaned = 0.00121015 Jy
! Component: 3600  -  total flux cleaned = 0.00128546 Jy
! Component: 3650  -  total flux cleaned = 0.00129386 Jy
! Component: 3700  -  total flux cleaned = 0.0013435 Jy
! Component: 3750  -  total flux cleaned = 0.0013518 Jy
! Component: 3800  -  total flux cleaned = 0.00143358 Jy
! Component: 3850  -  total flux cleaned = 0.00146604 Jy
! Component: 3900  -  total flux cleaned = 0.00149028 Jy
! Component: 3950  -  total flux cleaned = 0.00156256 Jy
! Component: 4000  -  total flux cleaned = 0.00155452 Jy
! Component: 4050  -  total flux cleaned = 0.00159417 Jy
! Total flux subtracted in 4096 components = 0.00163365 Jy
! Clean residual min=-0.000474 max=0.000465 Jy/beam
! Clean residual mean=0.000000 rms=0.000135 Jy/beam
! Combined flux in latest and established models = 0.0923686 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 390 components and 0.0923686 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1213+1307_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8926 x 2.023 at -0.3766 degrees (North through East)
! Clean map  min=-0.00087427  max=0.069564 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1213+1307_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0695637 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00013353 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.575862 0.575862 1.15172 2.30345 4.6069 9.21379 18.4276 36.8552 73.7103
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.069 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  520.958 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1213+1307_X_uvs.log closed on Thu Apr  7 12:10:27 2016