! Started logfile: /scr/pima/bg219h_uvs/J1213+1307_X_dfm.log on Thu May 19 22:25:30 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1213+1307_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1213+1307_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.88816 visibilities/baseline/integration-bin.
! Found source: J1213+1307
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29256 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1213+1307_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007158Jy  sigma=25.472465
! Fit after  self-cal, rms=0.930691Jy  sigma=23.527495
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6755 mas, bmaj=1.672 mas, bpa=-2.064 degrees
! Estimated noise=0.390785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0526775 Jy
! Component: 100  -  total flux cleaned = 0.0668727 Jy
! Total flux subtracted in 100 components = 0.0668727 Jy
! Clean residual min=-0.003054 max=0.005856 Jy/beam
! Clean residual mean=-0.000001 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.0668727 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0668727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062008Jy  sigma=1.432827
! Fit after  self-cal, rms=0.061010Jy  sigma=1.408768
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00651749 Jy
! Component: 100  -  total flux cleaned = 0.00958235 Jy
! Total flux subtracted in 100 components = 0.00958235 Jy
! Clean residual min=-0.002636 max=0.003268 Jy/beam
! Clean residual mean=-0.000001 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.0764551 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.076455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060186Jy  sigma=1.384863
! Fit after  self-cal, rms=0.060193Jy  sigma=1.384707
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8858 mas, bmaj=1.997 mas, bpa=-0.4125 degrees
! Estimated noise=0.176445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0040361 Jy
! Component: 100  -  total flux cleaned = 0.00633282 Jy
! Component: 150  -  total flux cleaned = 0.00791677 Jy
! Component: 200  -  total flux cleaned = 0.00891636 Jy
! Total flux subtracted in 200 components = 0.00891636 Jy
! Clean residual min=-0.001452 max=0.001996 Jy/beam
! Clean residual mean=-0.000001 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.0853714 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 40 components and 0.0853714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059921Jy  sigma=1.376215
! Fit after  self-cal, rms=0.059896Jy  sigma=1.375466
! Inverting map 
! Added new window around map position (-3.8, -5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196952 Jy
! Component: 100  -  total flux cleaned = 0.00315385 Jy
! Component: 150  -  total flux cleaned = 0.00404326 Jy
! Component: 200  -  total flux cleaned = 0.0045298 Jy
! Total flux subtracted in 200 components = 0.0045298 Jy
! Clean residual min=-0.001182 max=0.001195 Jy/beam
! Clean residual mean=-0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.0899012 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 61 components and 0.0899012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059826Jy  sigma=1.373257
! Fit after  self-cal, rms=0.059820Jy  sigma=1.373067
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8858 x 1.997 at -0.4125 degrees (North through East)
! Clean map  min=-0.0011728  max=0.071389 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.94     KP        0.99     
!   LA        1.02     MK        1.06     NL        0.99     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.93     KP        0.99     
!   LA        1.01     MK        1.03     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.97     KP        1.02     
!   LA        0.93     MK        1.04     NL        0.97     OV        1.01     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.96     KP        1.01     
!   LA        0.97     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.92     KP        1.04     
!   LA        1.00     MK        1.08     NL        1.03     OV        0.97     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.96     KP        1.03     
!   LA        0.98     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.98     KP        1.04     
!   LA        1.00     MK        1.04     NL        0.99     OV        0.98     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.96     MK        0.99     NL        1.02     OV        1.01     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.99     KP        1.04     
!   LA        1.01     MK        0.99     NL        1.03     OV        1.02     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.94     KP        1.02     
!   LA        1.01     MK        1.04     NL        1.02     OV        1.02     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.97     KP        1.03     
!   LA        0.98     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.91     KP        0.93     
!   LA        1.02     MK        0.93     NL        1.07     OV        1.05     
!   PT        0.98     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.059820Jy  sigma=1.373067
! Fit after  self-cal, rms=0.058752Jy  sigma=1.370977
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8874 mas, bmaj=1.998 mas, bpa=-0.276 degrees
! Estimated noise=0.175605 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000684603 Jy
! Component: 100  -  total flux cleaned = 0.000826734 Jy
! Component: 150  -  total flux cleaned = 0.000826509 Jy
! Component: 200  -  total flux cleaned = 0.0008265 Jy
! Total flux subtracted in 200 components = 0.0008265 Jy
! Clean residual min=-0.001108 max=0.001062 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0907277 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 71 components and 0.0907277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058735Jy  sigma=1.370559
! Fit after  self-cal, rms=0.058724Jy  sigma=1.370460
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058724Jy  sigma=1.370460
! Fit after  self-cal, rms=0.059128Jy  sigma=1.367141
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8874 mas, bmaj=2.004 mas, bpa=-0.173 degrees
! Estimated noise=0.175616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000246197 Jy
! Component: 100  -  total flux cleaned = 0.000263696 Jy
! Component: 150  -  total flux cleaned = 0.000263029 Jy
! Component: 200  -  total flux cleaned = 0.000248755 Jy
! Total flux subtracted in 200 components = 0.000248755 Jy
! Clean residual min=-0.000970 max=0.000934 Jy/beam
! Clean residual mean=0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0909765 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.0909765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059118Jy  sigma=1.366898
! Fit after  self-cal, rms=0.059133Jy  sigma=1.366783
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.30821e-05 Jy
! Component: 100  -  total flux cleaned = 6.29821e-05 Jy
! Component: 150  -  total flux cleaned = 5.149e-05 Jy
! Component: 200  -  total flux cleaned = 6.29905e-05 Jy
! Total flux subtracted in 200 components = 6.29905e-05 Jy
! Clean residual min=-0.000968 max=0.000936 Jy/beam
! Clean residual mean=0.000000 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.0910395 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 94 components and 0.0910395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059128Jy  sigma=1.366669
! Fit after  self-cal, rms=0.059128Jy  sigma=1.366664
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059128Jy  sigma=1.366664
! Fit after  self-cal, rms=0.058929Jy  sigma=1.366886
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8873 mas, bmaj=2.004 mas, bpa=-0.05533 degrees
! Estimated noise=0.17479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.42581e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105771 Jy
! Component: 150  -  total flux cleaned = -0.000116845 Jy
! Component: 200  -  total flux cleaned = -0.000137816 Jy
! Total flux subtracted in 200 components = -0.000137816 Jy
! Clean residual min=-0.000961 max=0.000978 Jy/beam
! Clean residual mean=0.000000 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0909017 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 103 components and 0.0909017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058924Jy  sigma=1.366762
! Fit after  self-cal, rms=0.058925Jy  sigma=1.366750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.08678e-05 Jy
! Component: 100  -  total flux cleaned = 1.24689e-06 Jy
! Component: 150  -  total flux cleaned = -1.69023e-05 Jy
! Component: 200  -  total flux cleaned = -3.38825e-05 Jy
! Total flux subtracted in 200 components = -3.38825e-05 Jy
! Clean residual min=-0.000963 max=0.000974 Jy/beam
! Clean residual mean=0.000000 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.0908678 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 106 components and 0.0908678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058922Jy  sigma=1.366685
! Fit after  self-cal, rms=0.058923Jy  sigma=1.366684
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058923Jy  sigma=1.366684
! Fit after  self-cal, rms=0.058688Jy  sigma=1.366730
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.073 mas, bmaj=3.054 mas, bpa=-0.8884 degrees
! Estimated noise=0.219782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000228446 Jy
! Component: 100  -  total flux cleaned = -0.000190258 Jy
! Component: 150  -  total flux cleaned = -0.000165667 Jy
! Component: 200  -  total flux cleaned = -0.00015818 Jy
! Total flux subtracted in 200 components = -0.00015818 Jy
! Clean residual min=-0.001202 max=0.001136 Jy/beam
! Clean residual mean=0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0907096 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 118 components and 0.0907096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058687Jy  sigma=1.366705
! Fit after  self-cal, rms=0.058686Jy  sigma=1.366698
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.65299e-05 Jy
! Component: 100  -  total flux cleaned = 1.67031e-05 Jy
! Component: 150  -  total flux cleaned = 1.72131e-05 Jy
! Component: 200  -  total flux cleaned = 1.72761e-05 Jy
! Total flux subtracted in 200 components = 1.72761e-05 Jy
! Clean residual min=-0.001199 max=0.001126 Jy/beam
! Clean residual mean=0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0907269 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 129 components and 0.0907269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058685Jy  sigma=1.366691
! Fit after  self-cal, rms=0.058685Jy  sigma=1.366691
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8874 mas, bmaj=2.005 mas, bpa=-0.01071 degrees
! Estimated noise=0.174132 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8874 x 2.005 at -0.01071 degrees (North through East)
! Clean map  min=-0.00090411  max=0.070523 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6771 mas, bmaj=1.677 mas, bpa=-1.523 degrees
! Estimated noise=0.384981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0524374 Jy
! Component: 100  -  total flux cleaned = 0.0662543 Jy
! Component: 150  -  total flux cleaned = 0.0724082 Jy
! Component: 200  -  total flux cleaned = 0.0760802 Jy
! Total flux subtracted in 200 components = 0.0760802 Jy
! Clean residual min=-0.002574 max=0.002575 Jy/beam
! Clean residual mean=-0.000000 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.0760801 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0760801 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8874 mas, bmaj=2.005 mas, bpa=-0.01071 degrees
! Estimated noise=0.174132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00399602 Jy
! Component: 100  -  total flux cleaned = 0.00672442 Jy
! Component: 150  -  total flux cleaned = 0.00873129 Jy
! Component: 200  -  total flux cleaned = 0.010263 Jy
! Total flux subtracted in 200 components = 0.010263 Jy
! Clean residual min=-0.001241 max=0.001153 Jy/beam
! Clean residual mean=-0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0863431 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 52 components and 0.0863432 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.073 mas, bmaj=3.054 mas, bpa=-0.8884 degrees
! Estimated noise=0.219782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017755 Jy
! Component: 100  -  total flux cleaned = 0.00253452 Jy
! Component: 150  -  total flux cleaned = 0.00299911 Jy
! Component: 200  -  total flux cleaned = 0.00336673 Jy
! Total flux subtracted in 200 components = 0.00336673 Jy
! Clean residual min=-0.001291 max=0.001144 Jy/beam
! Clean residual mean=0.000000 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0897099 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294579 Jy
! Component: 100  -  total flux cleaned = 0.000516708 Jy
! Component: 150  -  total flux cleaned = 0.000659467 Jy
! Component: 200  -  total flux cleaned = 0.000721482 Jy
! Total flux subtracted in 200 components = 0.000721482 Jy
! Clean residual min=-0.001238 max=0.001105 Jy/beam
! Clean residual mean=0.000000 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.0904314 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 100 components and 0.0904313 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8874 mas, bmaj=2.005 mas, bpa=-0.01071 degrees
! Estimated noise=0.174132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.40912e-05 Jy
! Component: 100  -  total flux cleaned = 3.19953e-05 Jy
! Component: 150  -  total flux cleaned = 6.95834e-05 Jy
! Component: 200  -  total flux cleaned = 7.12484e-05 Jy
! Total flux subtracted in 200 components = 7.12484e-05 Jy
! Clean residual min=-0.000977 max=0.001054 Jy/beam
! Clean residual mean=0.000000 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0905026 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 117 components and 0.0905026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058698Jy  sigma=1.366980
! Fit after  self-cal, rms=0.058694Jy  sigma=1.366942
wmodel /J1213+1307_X_map.mod
! wmodel: Unable to open new model file: /J1213+1307_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1213+1307_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8874 x 2.005 at -0.01071 degrees (North through East)
! Clean map  min=-0.00090131  max=0.070275 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1213+1307_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0702749 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000234176 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.999687 0.999687 1.99937 3.99875 7.9975 15.995 31.99 63.98
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  300.093 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1213+1307_X_dfm.log closed on Thu May 19 22:25:33 2016