! Started logfile: /scr/pima/bg219h_uvs/J1211+1820_X_dfm.log on Thu May 19 22:25:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1211+1820_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1211+1820_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.779365 visibilities/baseline/integration-bin.
! Found source: J1211+1820
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1211+1820_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031004Jy  sigma=24.602415
! Fit after  self-cal, rms=0.755715Jy  sigma=17.954763
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6669 mas, bmaj=1.681 mas, bpa=-3.367 degrees
! Estimated noise=0.494399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181119 Jy
! Component: 100  -  total flux cleaned = 0.233004 Jy
! Total flux subtracted in 100 components = 0.233004 Jy
! Clean residual min=-0.012796 max=0.024662 Jy/beam
! Clean residual mean=-0.000009 rms=0.002858 Jy/beam
! Combined flux in latest and established models = 0.233004 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.233004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094374Jy  sigma=2.110646
! Fit after  self-cal, rms=0.094133Jy  sigma=2.103719
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0277571 Jy
! Component: 100  -  total flux cleaned = 0.0419351 Jy
! Total flux subtracted in 100 components = 0.0419351 Jy
! Clean residual min=-0.007885 max=0.022544 Jy/beam
! Clean residual mean=-0.000006 rms=0.001972 Jy/beam
! Combined flux in latest and established models = 0.274939 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.274939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082839Jy  sigma=1.805786
! Fit after  self-cal, rms=0.082646Jy  sigma=1.801417
! Inverting map 
! Added new window around map position (1.6, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0187336 Jy
! Component: 100  -  total flux cleaned = 0.0283289 Jy
! Total flux subtracted in 100 components = 0.0283289 Jy
! Clean residual min=-0.005969 max=0.007928 Jy/beam
! Clean residual mean=-0.000004 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 0.303268 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.303268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076890Jy  sigma=1.656624
! Fit after  self-cal, rms=0.076243Jy  sigma=1.641531
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00869924 Jy
! Component: 100  -  total flux cleaned = 0.014367 Jy
! Total flux subtracted in 100 components = 0.014367 Jy
! Clean residual min=-0.005189 max=0.005544 Jy/beam
! Clean residual mean=-0.000003 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.317635 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 25 components and 0.317635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074694Jy  sigma=1.602567
! Fit after  self-cal, rms=0.074573Jy  sigma=1.599801
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8213 mas, bmaj=1.912 mas, bpa=-3.083 degrees
! Estimated noise=0.311199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00712469 Jy
! Component: 100  -  total flux cleaned = 0.0112332 Jy
! Component: 150  -  total flux cleaned = 0.0137841 Jy
! Component: 200  -  total flux cleaned = 0.0153998 Jy
! Total flux subtracted in 200 components = 0.0153998 Jy
! Clean residual min=-0.003498 max=0.003943 Jy/beam
! Clean residual mean=-0.000002 rms=0.000778 Jy/beam
! Combined flux in latest and established models = 0.333035 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 33 components and 0.333035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073854Jy  sigma=1.581703
! Fit after  self-cal, rms=0.073778Jy  sigma=1.579771
! Inverting map 
! Added new window around map position (8.6, -8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359363 Jy
! Component: 100  -  total flux cleaned = 0.00428407 Jy
! Component: 150  -  total flux cleaned = 0.00411925 Jy
! Component: 200  -  total flux cleaned = 0.0041699 Jy
! Total flux subtracted in 200 components = 0.0041699 Jy
! Clean residual min=-0.003085 max=0.003271 Jy/beam
! Clean residual mean=-0.000001 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.337205 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 47 components and 0.337205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073548Jy  sigma=1.575724
! Fit after  self-cal, rms=0.073527Jy  sigma=1.575010
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8213 x 1.912 at -3.083 degrees (North through East)
! Clean map  min=-0.0027889  max=0.24108 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.01     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.99     MK        0.98     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.01     KP        1.00     
!   LA        1.02     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        1.01     
!   LA        1.00     MK        0.96     NL        1.01     OV        1.01     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        0.97     
!   LA        1.01     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.03     KP        1.00     
!   LA        0.98     MK        0.98     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00     KP        0.99     
!   LA        0.98     MK        0.98     NL        1.01     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.02     KP        0.97     
!   LA        0.98     MK        1.00     NL        1.02     OV        1.01     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.03     KP        0.97     
!   LA        0.99     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.99     KP        0.96     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.073527Jy  sigma=1.575010
! Fit after  self-cal, rms=0.073518Jy  sigma=1.569009
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8219 mas, bmaj=1.913 mas, bpa=-3.028 degrees
! Estimated noise=0.311162 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226143 Jy
! Component: 100  -  total flux cleaned = 0.00263022 Jy
! Component: 150  -  total flux cleaned = 0.00280875 Jy
! Component: 200  -  total flux cleaned = 0.00291071 Jy
! Total flux subtracted in 200 components = 0.00291071 Jy
! Clean residual min=-0.002014 max=0.002280 Jy/beam
! Clean residual mean=-0.000000 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.340115 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.340115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073354Jy  sigma=1.565534
! Fit after  self-cal, rms=0.073351Jy  sigma=1.565314
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073351Jy  sigma=1.565314
! Fit after  self-cal, rms=0.073659Jy  sigma=1.557216
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8223 mas, bmaj=1.917 mas, bpa=-2.985 degrees
! Estimated noise=0.31125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00082642 Jy
! Component: 100  -  total flux cleaned = 0.00103115 Jy
! Component: 150  -  total flux cleaned = 0.00100226 Jy
! Component: 200  -  total flux cleaned = 0.000926614 Jy
! Total flux subtracted in 200 components = 0.000926614 Jy
! Clean residual min=-0.001775 max=0.001890 Jy/beam
! Clean residual mean=-0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.341042 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 81 components and 0.341042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073626Jy  sigma=1.556480
! Fit after  self-cal, rms=0.073639Jy  sigma=1.556410
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.4, -33.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123674 Jy
! Component: 100  -  total flux cleaned = 0.00132056 Jy
! Component: 150  -  total flux cleaned = 0.00147433 Jy
! Component: 200  -  total flux cleaned = 0.00157985 Jy
! Total flux subtracted in 200 components = 0.00157985 Jy
! Clean residual min=-0.001647 max=0.001622 Jy/beam
! Clean residual mean=-0.000000 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.342622 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.342622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073588Jy  sigma=1.555339
! Fit after  self-cal, rms=0.073584Jy  sigma=1.555221
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073584Jy  sigma=1.555221
! Fit after  self-cal, rms=0.073578Jy  sigma=1.555126
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8221 mas, bmaj=1.917 mas, bpa=-2.992 degrees
! Estimated noise=0.311117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000525878 Jy
! Component: 100  -  total flux cleaned = 0.000630629 Jy
! Component: 150  -  total flux cleaned = 0.000677619 Jy
! Component: 200  -  total flux cleaned = 0.000655975 Jy
! Total flux subtracted in 200 components = 0.000655975 Jy
! Clean residual min=-0.001569 max=0.001583 Jy/beam
! Clean residual mean=-0.000000 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.343278 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 107 components and 0.343278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073559Jy  sigma=1.554730
! Fit after  self-cal, rms=0.073558Jy  sigma=1.554701
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000148151 Jy
! Component: 100  -  total flux cleaned = 0.000106717 Jy
! Component: 150  -  total flux cleaned = 8.69256e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105425 Jy
! Total flux subtracted in 200 components = 0.000105425 Jy
! Clean residual min=-0.001558 max=0.001592 Jy/beam
! Clean residual mean=-0.000000 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.343383 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 114 components and 0.343383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073548Jy  sigma=1.554477
! Fit after  self-cal, rms=0.073547Jy  sigma=1.554470
! Inverting map 
! Added new window around map position (46.8, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144943 Jy
! Component: 100  -  total flux cleaned = 0.00192187 Jy
! Component: 150  -  total flux cleaned = 0.00196944 Jy
! Component: 200  -  total flux cleaned = 0.00201014 Jy
! Total flux subtracted in 200 components = 0.00201014 Jy
! Clean residual min=-0.001673 max=0.001451 Jy/beam
! Clean residual mean=-0.000000 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.345394 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 125 components and 0.345393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073513Jy  sigma=1.553695
! Fit after  self-cal, rms=0.073512Jy  sigma=1.553651
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073512Jy  sigma=1.553651
! Fit after  self-cal, rms=0.073509Jy  sigma=1.553575
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.955 mas, bmaj=2.633 mas, bpa=-5.15 degrees
! Estimated noise=0.407554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000576911 Jy
! Component: 100  -  total flux cleaned = 0.000894283 Jy
! Component: 150  -  total flux cleaned = 0.00108987 Jy
! Component: 200  -  total flux cleaned = 0.00115368 Jy
! Total flux subtracted in 200 components = 0.00115368 Jy
! Clean residual min=-0.001619 max=0.001473 Jy/beam
! Clean residual mean=-0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.346547 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 142 components and 0.346547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073506Jy  sigma=1.553487
! Fit after  self-cal, rms=0.073505Jy  sigma=1.553470
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136437 Jy
! Component: 100  -  total flux cleaned = 0.000210593 Jy
! Component: 150  -  total flux cleaned = 0.00025192 Jy
! Component: 200  -  total flux cleaned = 0.000277281 Jy
! Total flux subtracted in 200 components = 0.000277281 Jy
! Clean residual min=-0.001580 max=0.001477 Jy/beam
! Clean residual mean=-0.000001 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.346824 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 150 components and 0.346824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073504Jy  sigma=1.553444
! Fit after  self-cal, rms=0.073503Jy  sigma=1.553434
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8221 mas, bmaj=1.918 mas, bpa=-2.991 degrees
! Estimated noise=0.311018 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8221 x 1.918 at -2.991 degrees (North through East)
! Clean map  min=-0.0019887  max=0.24111 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6673 mas, bmaj=1.687 mas, bpa=-3.294 degrees
! Estimated noise=0.495088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181085 Jy
! Component: 100  -  total flux cleaned = 0.236188 Jy
! Component: 150  -  total flux cleaned = 0.267696 Jy
! Component: 200  -  total flux cleaned = 0.28725 Jy
! Total flux subtracted in 200 components = 0.28725 Jy
! Clean residual min=-0.006191 max=0.010561 Jy/beam
! Clean residual mean=-0.000004 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 0.28725 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.28725 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8221 mas, bmaj=1.918 mas, bpa=-2.991 degrees
! Estimated noise=0.311018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191827 Jy
! Component: 100  -  total flux cleaned = 0.0302578 Jy
! Component: 150  -  total flux cleaned = 0.0372436 Jy
! Component: 200  -  total flux cleaned = 0.0421104 Jy
! Total flux subtracted in 200 components = 0.0421104 Jy
! Clean residual min=-0.002495 max=0.002744 Jy/beam
! Clean residual mean=-0.000002 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.329361 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 25 components and 0.329361 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00357684 Jy
! Component: 100  -  total flux cleaned = 0.00628068 Jy
! Component: 150  -  total flux cleaned = 0.00845759 Jy
! Component: 200  -  total flux cleaned = 0.0099418 Jy
! Total flux subtracted in 200 components = 0.0099418 Jy
! Clean residual min=-0.001938 max=0.001727 Jy/beam
! Clean residual mean=-0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.339302 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 48 components and 0.339302 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.955 mas, bmaj=2.633 mas, bpa=-5.15 degrees
! Estimated noise=0.407554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022921 Jy
! Component: 100  -  total flux cleaned = 0.00373319 Jy
! Component: 150  -  total flux cleaned = 0.00429567 Jy
! Component: 200  -  total flux cleaned = 0.00478373 Jy
! Total flux subtracted in 200 components = 0.00478373 Jy
! Clean residual min=-0.001662 max=0.001569 Jy/beam
! Clean residual mean=-0.000002 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.344086 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000351891 Jy
! Component: 100  -  total flux cleaned = 0.000665227 Jy
! Component: 150  -  total flux cleaned = 0.000942916 Jy
! Component: 200  -  total flux cleaned = 0.0011385 Jy
! Total flux subtracted in 200 components = 0.0011385 Jy
! Clean residual min=-0.001629 max=0.001479 Jy/beam
! Clean residual mean=-0.000002 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.345225 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 86 components and 0.345225 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8221 mas, bmaj=1.918 mas, bpa=-2.991 degrees
! Estimated noise=0.311018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149501 Jy
! Component: 100  -  total flux cleaned = -0.000228247 Jy
! Component: 150  -  total flux cleaned = -0.000263758 Jy
! Component: 200  -  total flux cleaned = -0.000233589 Jy
! Total flux subtracted in 200 components = -0.000233589 Jy
! Clean residual min=-0.001767 max=0.001594 Jy/beam
! Clean residual mean=-0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.344991 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 106 components and 0.344991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073566Jy  sigma=1.554618
! Fit after  self-cal, rms=0.073556Jy  sigma=1.554374
wmodel /J1211+1820_X_map.mod
! wmodel: Unable to open new model file: /J1211+1820_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1211+1820_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8221 x 1.918 at -2.991 degrees (North through East)
! Clean map  min=-0.0014893  max=0.24086 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1211+1820_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.240857 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000365702 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.4555 0.4555 0.911 1.822 3.644 7.288 14.576 29.152 58.304
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.24 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  658.617 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1211+1820_X_dfm.log closed on Thu May 19 22:25:25 2016