! Started logfile: /scr/pima/bg219h_uvs/J1201+1431_X_dfm.log on Thu May 19 22:24:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1201+1431_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1201+1431_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.840476 visibilities/baseline/integration-bin.
! Found source: J1201+1431
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12708 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1201+1431_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.033357Jy  sigma=24.826365
! Fit after  self-cal, rms=0.776461Jy  sigma=18.578295
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7118 mas, bmaj=1.664 mas, bpa=-2.477 degrees
! Estimated noise=0.519469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.161867 Jy
! Component: 100  -  total flux cleaned = 0.21982 Jy
! Total flux subtracted in 100 components = 0.21982 Jy
! Clean residual min=-0.012035 max=0.032244 Jy/beam
! Clean residual mean=-0.000006 rms=0.002906 Jy/beam
! Combined flux in latest and established models = 0.21982 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.21982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092864Jy  sigma=2.146898
! Fit after  self-cal, rms=0.092185Jy  sigma=2.132605
! Inverting map 
! Added new window around map position (0.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0363989 Jy
! Component: 100  -  total flux cleaned = 0.056151 Jy
! Total flux subtracted in 100 components = 0.056151 Jy
! Clean residual min=-0.006564 max=0.009738 Jy/beam
! Clean residual mean=-0.000004 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.275971 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 7 components and 0.275971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072233Jy  sigma=1.602163
! Fit after  self-cal, rms=0.071581Jy  sigma=1.588726
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128922 Jy
! Component: 100  -  total flux cleaned = 0.0202443 Jy
! Total flux subtracted in 100 components = 0.0202443 Jy
! Clean residual min=-0.004744 max=0.004549 Jy/beam
! Clean residual mean=-0.000003 rms=0.001081 Jy/beam
! Combined flux in latest and established models = 0.296215 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.296215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068362Jy  sigma=1.499642
! Fit after  self-cal, rms=0.068206Jy  sigma=1.497034
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9221 mas, bmaj=1.941 mas, bpa=-0.3274 degrees
! Estimated noise=0.297525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00806433 Jy
! Component: 100  -  total flux cleaned = 0.0128117 Jy
! Component: 150  -  total flux cleaned = 0.0159678 Jy
! Component: 200  -  total flux cleaned = 0.0181334 Jy
! Total flux subtracted in 200 components = 0.0181334 Jy
! Clean residual min=-0.002895 max=0.002995 Jy/beam
! Clean residual mean=-0.000005 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.314349 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 37 components and 0.314349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067131Jy  sigma=1.471072
! Fit after  self-cal, rms=0.067075Jy  sigma=1.469871
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9221 x 1.941 at -0.3274 degrees (North through East)
! Clean map  min=-0.0029106  max=0.22804 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.01     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.02     OV        1.02     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.97     KP        0.99     
!   LA        1.01     MK        0.98     NL        1.00     OV        1.02     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.01     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.99     MK        0.98     NL        0.99     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.98     KP        0.99     
!   LA        1.02     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.97     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.02     OV        1.03     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.03     KP        1.01     
!   LA        1.02     MK        0.97     NL        1.00     OV        1.02     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.97     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.01     KP        0.98     
!   LA        1.01     MK        1.00     NL        1.00     OV        1.03     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        0.99     
!   LA        1.00     MK        0.97     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        0.98     
!   LA        1.03     MK        0.97     NL        1.00     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.98     
!   LA        1.02     MK        0.99     NL        1.01     OV        1.02     
!   PT        0.97     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.067075Jy  sigma=1.469871
! Fit after  self-cal, rms=0.066573Jy  sigma=1.462557
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9233 mas, bmaj=1.944 mas, bpa=-0.4986 degrees
! Estimated noise=0.296409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000703762 Jy
! Component: 100  -  total flux cleaned = 0.000703546 Jy
! Component: 150  -  total flux cleaned = 0.000703778 Jy
! Component: 200  -  total flux cleaned = 0.000671892 Jy
! Total flux subtracted in 200 components = 0.000671892 Jy
! Clean residual min=-0.002310 max=0.002348 Jy/beam
! Clean residual mean=-0.000002 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.31502 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.31502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066512Jy  sigma=1.461495
! Fit after  self-cal, rms=0.066494Jy  sigma=1.461320
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066494Jy  sigma=1.461320
! Fit after  self-cal, rms=0.066797Jy  sigma=1.452537
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9217 mas, bmaj=1.947 mas, bpa=-0.5887 degrees
! Estimated noise=0.295721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000903117 Jy
! Component: 100  -  total flux cleaned = 0.00100522 Jy
! Component: 150  -  total flux cleaned = 0.00105436 Jy
! Component: 200  -  total flux cleaned = 0.0010549 Jy
! Total flux subtracted in 200 components = 0.0010549 Jy
! Clean residual min=-0.002035 max=0.001990 Jy/beam
! Clean residual mean=-0.000002 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.316075 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 0.316075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066758Jy  sigma=1.451678
! Fit after  self-cal, rms=0.066766Jy  sigma=1.451512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.13254e-05 Jy
! Component: 100  -  total flux cleaned = 3.49581e-05 Jy
! Component: 150  -  total flux cleaned = 9.11567e-05 Jy
! Component: 200  -  total flux cleaned = 0.000108625 Jy
! Total flux subtracted in 200 components = 0.000108625 Jy
! Clean residual min=-0.002008 max=0.001966 Jy/beam
! Clean residual mean=-0.000002 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.316184 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 58 components and 0.316184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066753Jy  sigma=1.451182
! Fit after  self-cal, rms=0.066748Jy  sigma=1.451119
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066748Jy  sigma=1.451119
! Fit after  self-cal, rms=0.066552Jy  sigma=1.450928
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9204 mas, bmaj=1.947 mas, bpa=-0.6386 degrees
! Estimated noise=0.295083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000431829 Jy
! Component: 100  -  total flux cleaned = 0.000430855 Jy
! Component: 150  -  total flux cleaned = 0.00048286 Jy
! Component: 200  -  total flux cleaned = 0.000542389 Jy
! Total flux subtracted in 200 components = 0.000542389 Jy
! Clean residual min=-0.001919 max=0.001848 Jy/beam
! Clean residual mean=-0.000002 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.316726 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 59 components and 0.316726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066539Jy  sigma=1.450623
! Fit after  self-cal, rms=0.066532Jy  sigma=1.450566
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.03767e-06 Jy
! Component: 100  -  total flux cleaned = 2.81318e-05 Jy
! Component: 150  -  total flux cleaned = 6.92496e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105132 Jy
! Total flux subtracted in 200 components = 0.000105132 Jy
! Clean residual min=-0.001893 max=0.001852 Jy/beam
! Clean residual mean=-0.000002 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.316831 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.316831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066526Jy  sigma=1.450398
! Fit after  self-cal, rms=0.066523Jy  sigma=1.450364
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066523Jy  sigma=1.450364
! Fit after  self-cal, rms=0.066422Jy  sigma=1.450303
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.06 mas, bmaj=3.022 mas, bpa=-3.123 degrees
! Estimated noise=0.379599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00035817 Jy
! Component: 100  -  total flux cleaned = 0.000403538 Jy
! Component: 150  -  total flux cleaned = 0.000411093 Jy
! Component: 200  -  total flux cleaned = 0.000405074 Jy
! Total flux subtracted in 200 components = 0.000405074 Jy
! Clean residual min=-0.002162 max=0.002054 Jy/beam
! Clean residual mean=-0.000005 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.317236 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 64 components and 0.317237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066418Jy  sigma=1.450233
! Fit after  self-cal, rms=0.066415Jy  sigma=1.450216
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.65748e-05 Jy
! Component: 100  -  total flux cleaned = 2.71552e-05 Jy
! Component: 150  -  total flux cleaned = 2.70619e-05 Jy
! Component: 200  -  total flux cleaned = 2.28231e-05 Jy
! Total flux subtracted in 200 components = 2.28231e-05 Jy
! Clean residual min=-0.002139 max=0.002047 Jy/beam
! Clean residual mean=-0.000005 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.317259 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 65 components and 0.317259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066415Jy  sigma=1.450179
! Fit after  self-cal, rms=0.066414Jy  sigma=1.450168
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9197 mas, bmaj=1.947 mas, bpa=-0.6854 degrees
! Estimated noise=0.294766 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9197 x 1.947 at -0.6854 degrees (North through East)
! Clean map  min=-0.0017399  max=0.2255 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7108 mas, bmaj=1.673 mas, bpa=-2.728 degrees
! Estimated noise=0.514635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.160501 Jy
! Component: 100  -  total flux cleaned = 0.224005 Jy
! Component: 150  -  total flux cleaned = 0.259501 Jy
! Component: 200  -  total flux cleaned = 0.279597 Jy
! Total flux subtracted in 200 components = 0.279597 Jy
! Clean residual min=-0.005350 max=0.009892 Jy/beam
! Clean residual mean=-0.000003 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 0.279597 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.279597 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9197 mas, bmaj=1.947 mas, bpa=-0.6854 degrees
! Estimated noise=0.294766 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162193 Jy
! Component: 100  -  total flux cleaned = 0.0244336 Jy
! Component: 150  -  total flux cleaned = 0.0290988 Jy
! Component: 200  -  total flux cleaned = 0.0320106 Jy
! Total flux subtracted in 200 components = 0.0320106 Jy
! Clean residual min=-0.002265 max=0.002195 Jy/beam
! Clean residual mean=-0.000004 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.311608 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 29 components and 0.311608 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.06 mas, bmaj=3.022 mas, bpa=-3.123 degrees
! Estimated noise=0.379599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00294295 Jy
! Component: 100  -  total flux cleaned = 0.00426118 Jy
! Component: 150  -  total flux cleaned = 0.00492903 Jy
! Component: 200  -  total flux cleaned = 0.00528011 Jy
! Total flux subtracted in 200 components = 0.00528011 Jy
! Clean residual min=-0.002147 max=0.002085 Jy/beam
! Clean residual mean=-0.000005 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.316888 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.80836e-05 Jy
! Component: 100  -  total flux cleaned = 9.86703e-05 Jy
! Component: 150  -  total flux cleaned = 0.000117325 Jy
! Component: 200  -  total flux cleaned = 0.000134546 Jy
! Total flux subtracted in 200 components = 0.000134546 Jy
! Clean residual min=-0.002126 max=0.002074 Jy/beam
! Clean residual mean=-0.000005 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.317023 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 51 components and 0.317023 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9197 mas, bmaj=1.947 mas, bpa=-0.6854 degrees
! Estimated noise=0.294766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.04566e-05 Jy
! Component: 100  -  total flux cleaned = 6.14293e-05 Jy
! Component: 150  -  total flux cleaned = 6.10791e-05 Jy
! Component: 200  -  total flux cleaned = 4.28888e-05 Jy
! Total flux subtracted in 200 components = 4.28888e-05 Jy
! Clean residual min=-0.001875 max=0.001853 Jy/beam
! Clean residual mean=-0.000002 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.317066 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.317066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066424Jy  sigma=1.450022
! Fit after  self-cal, rms=0.066418Jy  sigma=1.449948
wmodel /J1201+1431_X_map.mod
! wmodel: Unable to open new model file: /J1201+1431_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1201+1431_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9197 x 1.947 at -0.6854 degrees (North through East)
! Clean map  min=-0.0017543  max=0.22536 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1201+1431_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.225357 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000442672 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.589293 0.589293 1.17859 2.35717 4.71434 9.42869 18.8574 37.7148 75.4295
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.225 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  509.084 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1201+1431_X_dfm.log closed on Thu May 19 22:24:51 2016