! Started logfile: /scr/pima/bg219h_uvs/J1157+0641_X_dfm.log on Thu May 19 22:24:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1157+0641_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1157+0641_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.866239 visibilities/baseline/integration-bin.
! Found source: J1157+0641
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24324 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1157+0641_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006783Jy  sigma=25.015526
! Fit after  self-cal, rms=0.869987Jy  sigma=21.577199
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.68 mas, bmaj=1.736 mas, bpa=-3.536 degrees
! Estimated noise=0.352661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.098144 Jy
! Component: 100  -  total flux cleaned = 0.121059 Jy
! Total flux subtracted in 100 components = 0.121059 Jy
! Clean residual min=-0.004934 max=0.013606 Jy/beam
! Clean residual mean=0.000002 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.121059 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.121059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067663Jy  sigma=1.537588
! Fit after  self-cal, rms=0.067594Jy  sigma=1.536082
! Inverting map 
! Added new window around map position (-1, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134122 Jy
! Component: 100  -  total flux cleaned = 0.0213515 Jy
! Total flux subtracted in 100 components = 0.0213515 Jy
! Clean residual min=-0.003421 max=0.004294 Jy/beam
! Clean residual mean=0.000001 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.142411 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.142411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063962Jy  sigma=1.432092
! Fit after  self-cal, rms=0.063846Jy  sigma=1.429027
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00570864 Jy
! Component: 100  -  total flux cleaned = 0.00943143 Jy
! Total flux subtracted in 100 components = 0.00943143 Jy
! Clean residual min=-0.002637 max=0.002914 Jy/beam
! Clean residual mean=0.000000 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.151842 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.151842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063069Jy  sigma=1.406728
! Fit after  self-cal, rms=0.063038Jy  sigma=1.405891
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8437 mas, bmaj=2.01 mas, bpa=-2.086 degrees
! Estimated noise=0.197738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438688 Jy
! Component: 100  -  total flux cleaned = 0.00681288 Jy
! Component: 150  -  total flux cleaned = 0.00831519 Jy
! Component: 200  -  total flux cleaned = 0.00935211 Jy
! Total flux subtracted in 200 components = 0.00935211 Jy
! Clean residual min=-0.002193 max=0.004040 Jy/beam
! Clean residual mean=-0.000003 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.161194 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 39 components and 0.161194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062733Jy  sigma=1.397471
! Fit after  self-cal, rms=0.062722Jy  sigma=1.397035
! Inverting map 
! Added new window around map position (-3.4, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00408578 Jy
! Component: 100  -  total flux cleaned = 0.00641457 Jy
! Component: 150  -  total flux cleaned = 0.0080672 Jy
! Component: 200  -  total flux cleaned = 0.00938667 Jy
! Total flux subtracted in 200 components = 0.00938667 Jy
! Clean residual min=-0.001629 max=0.001578 Jy/beam
! Clean residual mean=-0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.170581 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 91 components and 0.170581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062451Jy  sigma=1.388634
! Fit after  self-cal, rms=0.062422Jy  sigma=1.388044
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8437 x 2.01 at -2.086 degrees (North through East)
! Clean map  min=-0.0015227  max=0.13036 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.99     MK        1.04     NL        0.98     OV        1.03     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.98     KP        1.01     
!   LA        1.00     MK        1.05     NL        1.00     OV        1.03     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.96     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.00     OV        0.99     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.97     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        0.98     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.02     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        0.95     KP        0.99     
!   LA        0.97     MK        0.98     NL        1.01     OV        1.01     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        0.99     
!   LA        1.00     MK        1.05     NL        1.03     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.97     
!   LA        1.02     MK        0.99     NL        0.99     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.91     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.99     KP        1.00     
!   LA        1.02     MK        1.02     NL        0.96     OV        1.03     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.95     KP        0.92     
!   LA        0.99     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.062422Jy  sigma=1.388044
! Fit after  self-cal, rms=0.061458Jy  sigma=1.383888
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8476 mas, bmaj=2.016 mas, bpa=-2.075 degrees
! Estimated noise=0.196714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125213 Jy
! Component: 100  -  total flux cleaned = 0.00197096 Jy
! Component: 150  -  total flux cleaned = 0.00240141 Jy
! Component: 200  -  total flux cleaned = 0.00266618 Jy
! Total flux subtracted in 200 components = 0.00266618 Jy
! Clean residual min=-0.001336 max=0.001235 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.173247 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 106 components and 0.173247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061427Jy  sigma=1.382988
! Fit after  self-cal, rms=0.061417Jy  sigma=1.382876
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061417Jy  sigma=1.382876
! Fit after  self-cal, rms=0.061869Jy  sigma=1.379897
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8478 mas, bmaj=2.018 mas, bpa=-2.099 degrees
! Estimated noise=0.196708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000707397 Jy
! Component: 100  -  total flux cleaned = 0.00104409 Jy
! Component: 150  -  total flux cleaned = 0.0011904 Jy
! Component: 200  -  total flux cleaned = 0.00126036 Jy
! Total flux subtracted in 200 components = 0.00126036 Jy
! Clean residual min=-0.001274 max=0.001090 Jy/beam
! Clean residual mean=-0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.174508 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 119 components and 0.174508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061858Jy  sigma=1.379556
! Fit after  self-cal, rms=0.061869Jy  sigma=1.379502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.95371e-05 Jy
! Component: 100  -  total flux cleaned = 0.000149775 Jy
! Component: 150  -  total flux cleaned = 0.000185722 Jy
! Component: 200  -  total flux cleaned = 0.000207613 Jy
! Total flux subtracted in 200 components = 0.000207613 Jy
! Clean residual min=-0.001276 max=0.001092 Jy/beam
! Clean residual mean=-0.000001 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.174715 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 0.174715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061865Jy  sigma=1.379357
! Fit after  self-cal, rms=0.061863Jy  sigma=1.379340
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061863Jy  sigma=1.379340
! Fit after  self-cal, rms=0.061885Jy  sigma=1.379289
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.848 mas, bmaj=2.019 mas, bpa=-2.127 degrees
! Estimated noise=0.196703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000241462 Jy
! Component: 100  -  total flux cleaned = 0.000413747 Jy
! Component: 150  -  total flux cleaned = 0.000503213 Jy
! Component: 200  -  total flux cleaned = 0.000562727 Jy
! Total flux subtracted in 200 components = 0.000562727 Jy
! Clean residual min=-0.001241 max=0.001108 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.175278 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 125 components and 0.175278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061880Jy  sigma=1.379136
! Fit after  self-cal, rms=0.061880Jy  sigma=1.379118
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.47359e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104065 Jy
! Component: 150  -  total flux cleaned = 0.000112578 Jy
! Component: 200  -  total flux cleaned = 0.000129151 Jy
! Total flux subtracted in 200 components = 0.000129151 Jy
! Clean residual min=-0.001229 max=0.001109 Jy/beam
! Clean residual mean=-0.000001 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.175407 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 129 components and 0.175407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061877Jy  sigma=1.379029
! Fit after  self-cal, rms=0.061876Jy  sigma=1.379014
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061876Jy  sigma=1.379014
! Fit after  self-cal, rms=0.061899Jy  sigma=1.378997
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.151 mas, bmaj=3.258 mas, bpa=0.7057 degrees
! Estimated noise=0.250769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000514953 Jy
! Component: 100  -  total flux cleaned = 0.000582645 Jy
! Component: 150  -  total flux cleaned = 0.000603816 Jy
! Component: 200  -  total flux cleaned = 0.00060344 Jy
! Total flux subtracted in 200 components = 0.00060344 Jy
! Clean residual min=-0.001197 max=0.001462 Jy/beam
! Clean residual mean=-0.000002 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.17601 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 137 components and 0.17601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061899Jy  sigma=1.378959
! Fit after  self-cal, rms=0.061898Jy  sigma=1.378946
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, 46.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123669 Jy
! Component: 100  -  total flux cleaned = 0.00149266 Jy
! Component: 150  -  total flux cleaned = 0.00147454 Jy
! Component: 200  -  total flux cleaned = 0.00140766 Jy
! Total flux subtracted in 200 components = 0.00140766 Jy
! Clean residual min=-0.001097 max=0.001028 Jy/beam
! Clean residual mean=-0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.177418 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 158 components and 0.177418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061878Jy  sigma=1.378417
! Fit after  self-cal, rms=0.061877Jy  sigma=1.378366
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8483 mas, bmaj=2.019 mas, bpa=-2.147 degrees
! Estimated noise=0.196747 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8483 x 2.019 at -2.147 degrees (North through East)
! Clean map  min=-0.00098552  max=0.12954 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6834 mas, bmaj=1.743 mas, bpa=-3.626 degrees
! Estimated noise=0.351561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0976771 Jy
! Component: 100  -  total flux cleaned = 0.122555 Jy
! Component: 150  -  total flux cleaned = 0.135292 Jy
! Component: 200  -  total flux cleaned = 0.143025 Jy
! Total flux subtracted in 200 components = 0.143025 Jy
! Clean residual min=-0.002993 max=0.004093 Jy/beam
! Clean residual mean=0.000001 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.143025 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.143025 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8483 mas, bmaj=2.019 mas, bpa=-2.147 degrees
! Estimated noise=0.196747 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00755656 Jy
! Component: 100  -  total flux cleaned = 0.0124662 Jy
! Component: 150  -  total flux cleaned = 0.016102 Jy
! Component: 200  -  total flux cleaned = 0.0189291 Jy
! Total flux subtracted in 200 components = 0.0189291 Jy
! Clean residual min=-0.001611 max=0.002215 Jy/beam
! Clean residual mean=-0.000002 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.161954 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 46 components and 0.161954 Jy
! Inverting map 
! Added new window around map position (-5, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243224 Jy
! Component: 100  -  total flux cleaned = 0.00436249 Jy
! Component: 150  -  total flux cleaned = 0.00598775 Jy
! Component: 200  -  total flux cleaned = 0.00737772 Jy
! Total flux subtracted in 200 components = 0.00737772 Jy
! Clean residual min=-0.001384 max=0.001358 Jy/beam
! Clean residual mean=-0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.169332 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 82 components and 0.169332 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.151 mas, bmaj=3.258 mas, bpa=0.7057 degrees
! Estimated noise=0.250769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213477 Jy
! Component: 100  -  total flux cleaned = 0.00367827 Jy
! Component: 150  -  total flux cleaned = 0.00486742 Jy
! Component: 200  -  total flux cleaned = 0.0057985 Jy
! Total flux subtracted in 200 components = 0.0057985 Jy
! Clean residual min=-0.001244 max=0.001150 Jy/beam
! Clean residual mean=-0.000001 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.17513 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000546112 Jy
! Component: 100  -  total flux cleaned = 0.000952439 Jy
! Component: 150  -  total flux cleaned = 0.00129769 Jy
! Component: 200  -  total flux cleaned = 0.00148531 Jy
! Total flux subtracted in 200 components = 0.00148531 Jy
! Clean residual min=-0.001141 max=0.001059 Jy/beam
! Clean residual mean=-0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.176616 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 152 components and 0.176616 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8483 mas, bmaj=2.019 mas, bpa=-2.147 degrees
! Estimated noise=0.196747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124464 Jy
! Component: 100  -  total flux cleaned = 0.00020297 Jy
! Component: 150  -  total flux cleaned = 0.00027368 Jy
! Component: 200  -  total flux cleaned = 0.000316576 Jy
! Total flux subtracted in 200 components = 0.000316576 Jy
! Clean residual min=-0.001100 max=0.000962 Jy/beam
! Clean residual mean=-0.000000 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.176932 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 179 components and 0.176932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061854Jy  sigma=1.377778
! Fit after  self-cal, rms=0.061848Jy  sigma=1.377665
wmodel /J1157+0641_X_map.mod
! wmodel: Unable to open new model file: /J1157+0641_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1157+0641_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8483 x 2.019 at -2.147 degrees (North through East)
! Clean map  min=-0.00098211  max=0.12962 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1157+0641_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.129623 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000238415 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.551789 0.551789 1.10358 2.20716 4.41431 8.82862 17.6572 35.3145 70.629
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.129 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  543.686 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1157+0641_X_dfm.log closed on Thu May 19 22:24:43 2016