! Started logfile: /scr/pima/bg219h_uvs/J1153+0955_S_uvs.log on Thu Apr 7 09:02:00 2016 obs /scr/pima/bg219h_uvs/J1153+0955_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J1153+0955_S_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.72716 visibilities/baseline/integration-bin. ! Found source: J1153+0955 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 4712 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1153+0955_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.031852Jy sigma=24.431674 ! Fit after self-cal, rms=0.753726Jy sigma=17.830657 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=6.97 mas, bpa=-2.457 degrees ! Estimated noise=0.670568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190161 Jy ! Component: 100 - total flux cleaned = 0.23165 Jy ! Total flux subtracted in 100 components = 0.23165 Jy ! Clean residual min=-0.007216 max=0.014825 Jy/beam ! Clean residual mean=0.000028 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 0.23165 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.23165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065704Jy sigma=1.469006 ! Fit after self-cal, rms=0.065695Jy sigma=1.468830 ! Inverting map ! Added new window around map position (-2.5, 10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143686 Jy ! Component: 100 - total flux cleaned = 0.0229658 Jy ! Total flux subtracted in 100 components = 0.0229658 Jy ! Clean residual min=-0.005517 max=0.006076 Jy/beam ! Clean residual mean=0.000016 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.254616 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.254616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061442Jy sigma=1.363865 ! Fit after self-cal, rms=0.061240Jy sigma=1.359126 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.546 mas, bpa=-1.816 degrees ! Estimated noise=0.528349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00911673 Jy ! Component: 100 - total flux cleaned = 0.0149212 Jy ! Component: 150 - total flux cleaned = 0.0188947 Jy ! Component: 200 - total flux cleaned = 0.021797 Jy ! Total flux subtracted in 200 components = 0.021797 Jy ! Clean residual min=-0.003647 max=0.004186 Jy/beam ! Clean residual mean=0.000009 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.276413 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 69 components and 0.276413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059617Jy sigma=1.320863 ! Fit after self-cal, rms=0.059545Jy sigma=1.318836 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 7.546 at -1.816 degrees (North through East) ! Clean map min=-0.0034304 max=0.24275 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00 KP 0.98 ! LA 0.99 MK 1.02 NL 1.02 OV 1.00 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.01 KP 0.98 ! LA 0.96 MK 1.02 NL 1.02 OV 1.01 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.99 KP 0.97 ! LA 0.98 MK 1.02 NL 1.05 OV 0.98 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.03 KP 0.96 ! LA 0.97 MK 1.00 NL 0.97 OV 0.98 ! PT 0.99 SC 0.98 ! ! ! Fit before self-cal, rms=0.059545Jy sigma=1.318836 ! Fit after self-cal, rms=0.058784Jy sigma=1.304558 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.582 mas, bpa=-1.751 degrees ! Estimated noise=0.526478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171325 Jy ! Component: 100 - total flux cleaned = 0.00245254 Jy ! Component: 150 - total flux cleaned = 0.00253558 Jy ! Component: 200 - total flux cleaned = 0.00258491 Jy ! Total flux subtracted in 200 components = 0.00258491 Jy ! Clean residual min=-0.003169 max=0.003750 Jy/beam ! Clean residual mean=-0.000001 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.278998 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.278998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058733Jy sigma=1.303147 ! Fit after self-cal, rms=0.058721Jy sigma=1.302879 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058721Jy sigma=1.302879 ! Fit after self-cal, rms=0.057719Jy sigma=1.281358 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=7.581 mas, bpa=-1.73 degrees ! Estimated noise=0.526038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301018 Jy ! Component: 100 - total flux cleaned = 0.000129792 Jy ! Component: 150 - total flux cleaned = 0.000104475 Jy ! Component: 200 - total flux cleaned = 0.000124535 Jy ! Total flux subtracted in 200 components = 0.000124535 Jy ! Clean residual min=-0.002978 max=0.002750 Jy/beam ! Clean residual mean=0.000002 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.279123 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.279123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057696Jy sigma=1.280708 ! Fit after self-cal, rms=0.057692Jy sigma=1.280566 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115775 Jy ! Component: 100 - total flux cleaned = 0.000135861 Jy ! Component: 150 - total flux cleaned = 0.000171977 Jy ! Component: 200 - total flux cleaned = 0.000205337 Jy ! Total flux subtracted in 200 components = 0.000205337 Jy ! Clean residual min=-0.002976 max=0.002739 Jy/beam ! Clean residual mean=0.000002 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.279328 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.279328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057682Jy sigma=1.280278 ! Fit after self-cal, rms=0.057680Jy sigma=1.280254 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057680Jy sigma=1.280254 ! Fit after self-cal, rms=0.057688Jy sigma=1.280151 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=7.582 mas, bpa=-1.718 degrees ! Estimated noise=0.525856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.66918e-05 Jy ! Component: 100 - total flux cleaned = -5.21883e-05 Jy ! Component: 150 - total flux cleaned = -3.57021e-05 Jy ! Component: 200 - total flux cleaned = -1.97595e-05 Jy ! Total flux subtracted in 200 components = -1.97595e-05 Jy ! Clean residual min=-0.002934 max=0.002726 Jy/beam ! Clean residual mean=0.000002 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.279308 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.279308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057677Jy sigma=1.279863 ! Fit after self-cal, rms=0.057676Jy sigma=1.279840 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.70412e-05 Jy ! Component: 100 - total flux cleaned = 0.000114653 Jy ! Component: 150 - total flux cleaned = 0.000130115 Jy ! Component: 200 - total flux cleaned = 0.000144995 Jy ! Total flux subtracted in 200 components = 0.000144995 Jy ! Clean residual min=-0.002926 max=0.002709 Jy/beam ! Clean residual mean=0.000002 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.279453 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 0.279453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057669Jy sigma=1.279655 ! Fit after self-cal, rms=0.057669Jy sigma=1.279646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057669Jy sigma=1.279646 ! Fit after self-cal, rms=0.057655Jy sigma=1.279615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.777 mas, bmaj=11.39 mas, bpa=-2.033 degrees ! Estimated noise=0.67784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649449 Jy ! Component: 100 - total flux cleaned = 0.000885705 Jy ! Component: 150 - total flux cleaned = 0.00107047 Jy ! Component: 200 - total flux cleaned = 0.00110454 Jy ! Total flux subtracted in 200 components = 0.00110454 Jy ! Clean residual min=-0.003050 max=0.003253 Jy/beam ! Clean residual mean=0.000004 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.280558 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 99 components and 0.280558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057669Jy sigma=1.279700 ! Fit after self-cal, rms=0.057657Jy sigma=1.279453 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.06376e-05 Jy ! Component: 100 - total flux cleaned = 0.000156657 Jy ! Component: 150 - total flux cleaned = 0.000220644 Jy ! Component: 200 - total flux cleaned = 0.000234 Jy ! Total flux subtracted in 200 components = 0.000234 Jy ! Clean residual min=-0.002957 max=0.003201 Jy/beam ! Clean residual mean=0.000004 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.280792 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 103 components and 0.280792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057671Jy sigma=1.279645 ! Fit after self-cal, rms=0.057665Jy sigma=1.279543 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.582 mas, bpa=-1.711 degrees ! Estimated noise=0.525571 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.985 x 7.582 at -1.711 degrees (North through East) ! Clean map min=-0.0027122 max=0.24103 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=6.989 mas, bpa=-2.342 degrees ! Estimated noise=0.668768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189503 Jy ! Component: 100 - total flux cleaned = 0.231534 Jy ! Component: 150 - total flux cleaned = 0.245909 Jy ! Component: 200 - total flux cleaned = 0.254526 Jy ! Total flux subtracted in 200 components = 0.254526 Jy ! Clean residual min=-0.004735 max=0.005890 Jy/beam ! Clean residual mean=0.000012 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.254526 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.254526 Jy ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.582 mas, bpa=-1.711 degrees ! Estimated noise=0.525571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00834618 Jy ! Component: 100 - total flux cleaned = 0.0136364 Jy ! Component: 150 - total flux cleaned = 0.0172854 Jy ! Component: 200 - total flux cleaned = 0.0198684 Jy ! Total flux subtracted in 200 components = 0.0198684 Jy ! Clean residual min=-0.003244 max=0.003152 Jy/beam ! Clean residual mean=0.000006 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.274395 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 68 components and 0.274394 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.777 mas, bmaj=11.39 mas, bpa=-2.033 degrees ! Estimated noise=0.67784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368772 Jy ! Component: 100 - total flux cleaned = 0.00551019 Jy ! Component: 150 - total flux cleaned = 0.0060816 Jy ! Component: 200 - total flux cleaned = 0.00629118 Jy ! Total flux subtracted in 200 components = 0.00629118 Jy ! Clean residual min=-0.003044 max=0.003152 Jy/beam ! Clean residual mean=0.000004 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.280686 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137388 Jy ! Component: 100 - total flux cleaned = 0.000244782 Jy ! Component: 150 - total flux cleaned = 0.000275198 Jy ! Component: 200 - total flux cleaned = 0.000316591 Jy ! Total flux subtracted in 200 components = 0.000316591 Jy ! Clean residual min=-0.003003 max=0.003181 Jy/beam ! Clean residual mean=0.000004 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.281002 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 88 components and 0.281002 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.582 mas, bpa=-1.711 degrees ! Estimated noise=0.525571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330481 Jy ! Component: 100 - total flux cleaned = -0.000368172 Jy ! Component: 150 - total flux cleaned = -0.000439944 Jy ! Component: 200 - total flux cleaned = -0.000501613 Jy ! Total flux subtracted in 200 components = -0.000501613 Jy ! Clean residual min=-0.002878 max=0.002652 Jy/beam ! Clean residual mean=0.000002 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.280501 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 97 components and 0.280501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057670Jy sigma=1.279907 ! Fit after self-cal, rms=0.057667Jy sigma=1.279736 wmodel /scr/pima/bg219h_uvs/J1153+0955_S_map.mod ! Writing 97 model components to file: /scr/pima/bg219h_uvs/J1153+0955_S_map.mod wobs /scr/pima/bg219h_uvs/J1153+0955_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219h_uvs/J1153+0955_S_uvs.fits wwins /scr/pima/bg219h_uvs/J1153+0955_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219h_uvs/J1153+0955_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277956 Jy ! Component: 100 - total flux cleaned = -0.000278277 Jy ! Component: 150 - total flux cleaned = -0.000459259 Jy ! Component: 200 - total flux cleaned = -0.00045853 Jy ! Component: 250 - total flux cleaned = -0.000500307 Jy ! Component: 300 - total flux cleaned = -0.000499493 Jy ! Component: 350 - total flux cleaned = -0.000575827 Jy ! Component: 400 - total flux cleaned = -0.000649958 Jy ! Component: 450 - total flux cleaned = -0.000722387 Jy ! Component: 500 - total flux cleaned = -0.000721818 Jy ! Component: 550 - total flux cleaned = -0.000619006 Jy ! Component: 600 - total flux cleaned = -0.000552151 Jy ! Component: 650 - total flux cleaned = -0.00058411 Jy ! Component: 700 - total flux cleaned = -0.00051898 Jy ! Component: 750 - total flux cleaned = -0.000424503 Jy ! Component: 800 - total flux cleaned = -0.000363216 Jy ! Component: 850 - total flux cleaned = -0.000363534 Jy ! Component: 900 - total flux cleaned = -0.000362913 Jy ! Component: 950 - total flux cleaned = -0.00036204 Jy ! Component: 1000 - total flux cleaned = -0.000305256 Jy ! Component: 1050 - total flux cleaned = -0.00024915 Jy ! Component: 1100 - total flux cleaned = -0.000222128 Jy ! Component: 1150 - total flux cleaned = -0.000169043 Jy ! Component: 1200 - total flux cleaned = -0.000168854 Jy ! Component: 1250 - total flux cleaned = -0.000143482 Jy ! Component: 1300 - total flux cleaned = -0.000246459 Jy ! Component: 1350 - total flux cleaned = -0.000271983 Jy ! Component: 1400 - total flux cleaned = -0.000396158 Jy ! Component: 1450 - total flux cleaned = -0.000396184 Jy ! Component: 1500 - total flux cleaned = -0.000444553 Jy ! Component: 1550 - total flux cleaned = -0.000539027 Jy ! Component: 1600 - total flux cleaned = -0.000561973 Jy ! Component: 1650 - total flux cleaned = -0.000608113 Jy ! Component: 1700 - total flux cleaned = -0.000631045 Jy ! Component: 1750 - total flux cleaned = -0.000720769 Jy ! Component: 1800 - total flux cleaned = -0.000742518 Jy ! Component: 1850 - total flux cleaned = -0.000807173 Jy ! Component: 1900 - total flux cleaned = -0.000742861 Jy ! Component: 1950 - total flux cleaned = -0.000764071 Jy ! Component: 2000 - total flux cleaned = -0.000784842 Jy ! Component: 2050 - total flux cleaned = -0.000784831 Jy ! Component: 2100 - total flux cleaned = -0.000846453 Jy ! Component: 2150 - total flux cleaned = -0.00086608 Jy ! Component: 2200 - total flux cleaned = -0.000865997 Jy ! Component: 2250 - total flux cleaned = -0.00090534 Jy ! Component: 2300 - total flux cleaned = -0.000924715 Jy ! Component: 2350 - total flux cleaned = -0.000905574 Jy ! Component: 2400 - total flux cleaned = -0.000886571 Jy ! Component: 2450 - total flux cleaned = -0.000924319 Jy ! Component: 2500 - total flux cleaned = -0.000943344 Jy ! Component: 2550 - total flux cleaned = -0.000980375 Jy ! Component: 2600 - total flux cleaned = -0.00096218 Jy ! Component: 2650 - total flux cleaned = -0.000980602 Jy ! Component: 2700 - total flux cleaned = -0.000980579 Jy ! Component: 2750 - total flux cleaned = -0.000980796 Jy ! Component: 2800 - total flux cleaned = -0.000963238 Jy ! Component: 2850 - total flux cleaned = -0.00103343 Jy ! Component: 2900 - total flux cleaned = -0.00098121 Jy ! Component: 2950 - total flux cleaned = -0.000929657 Jy ! Component: 3000 - total flux cleaned = -0.000946882 Jy ! Component: 3050 - total flux cleaned = -0.000929899 Jy ! Component: 3100 - total flux cleaned = -0.000912929 Jy ! Component: 3150 - total flux cleaned = -0.000912987 Jy ! Component: 3200 - total flux cleaned = -0.0008798 Jy ! Component: 3250 - total flux cleaned = -0.000929206 Jy ! Component: 3300 - total flux cleaned = -0.000863759 Jy ! Component: 3350 - total flux cleaned = -0.000912564 Jy ! Component: 3400 - total flux cleaned = -0.000880333 Jy ! Component: 3450 - total flux cleaned = -0.000880423 Jy ! Component: 3500 - total flux cleaned = -0.000896267 Jy ! Component: 3550 - total flux cleaned = -0.000943575 Jy ! Component: 3600 - total flux cleaned = -0.000959196 Jy ! Component: 3650 - total flux cleaned = -0.000974703 Jy ! Component: 3700 - total flux cleaned = -0.000959248 Jy ! Component: 3750 - total flux cleaned = -0.00103612 Jy ! Component: 3800 - total flux cleaned = -0.00105146 Jy ! Component: 3850 - total flux cleaned = -0.00106666 Jy ! Component: 3900 - total flux cleaned = -0.00111187 Jy ! Component: 3950 - total flux cleaned = -0.00117179 Jy ! Component: 4000 - total flux cleaned = -0.00117178 Jy ! Component: 4050 - total flux cleaned = -0.00123105 Jy ! Total flux subtracted in 4096 components = -0.00126049 Jy ! Clean residual min=-0.000840 max=0.000797 Jy/beam ! Clean residual mean=-0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.27924 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 392 components and 0.27924 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219h_uvs/J1153+0955_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.985 x 7.582 at -1.711 degrees (North through East) ! Clean map min=-0.002491 max=0.24095 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1153+0955_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.240954 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000260447 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.324269 0.324269 0.648538 1.29708 2.59415 5.18831 10.3766 20.7532 41.5064 83.0129 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.24 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 925.157 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J1153+0955_S_uvs.log closed on Thu Apr 7 09:02:03 2016