! Started logfile: /scr/pima/bg219h_uvs/J1153+0914_X_dfm.log on Thu May 19 22:24:25 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1153+0914_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1153+0914_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.809756 visibilities/baseline/integration-bin.
! Found source: J1153+0914
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17928 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1153+0914_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006525Jy  sigma=25.030773
! Fit after  self-cal, rms=0.926307Jy  sigma=22.951188
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6822 mas, bmaj=1.743 mas, bpa=-5.145 degrees
! Estimated noise=0.376186 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0526737 Jy
! Component: 100  -  total flux cleaned = 0.0718977 Jy
! Total flux subtracted in 100 components = 0.0718977 Jy
! Clean residual min=-0.005843 max=0.014049 Jy/beam
! Clean residual mean=-0.000002 rms=0.001601 Jy/beam
! Combined flux in latest and established models = 0.0718977 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0718977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074018Jy  sigma=1.701548
! Fit after  self-cal, rms=0.072949Jy  sigma=1.676605
! Inverting map 
! Added new window around map position (-0.6, -3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162455 Jy
! Component: 100  -  total flux cleaned = 0.0270966 Jy
! Total flux subtracted in 100 components = 0.0270966 Jy
! Clean residual min=-0.004460 max=0.007161 Jy/beam
! Clean residual mean=-0.000002 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.0989943 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.0989943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067648Jy  sigma=1.523763
! Fit after  self-cal, rms=0.067052Jy  sigma=1.511993
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107882 Jy
! Component: 100  -  total flux cleaned = 0.0181962 Jy
! Total flux subtracted in 100 components = 0.0181962 Jy
! Clean residual min=-0.003570 max=0.004632 Jy/beam
! Clean residual mean=-0.000002 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.11719 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.11719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064612Jy  sigma=1.440018
! Fit after  self-cal, rms=0.064346Jy  sigma=1.433976
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00708277 Jy
! Component: 100  -  total flux cleaned = 0.0116046 Jy
! Total flux subtracted in 100 components = 0.0116046 Jy
! Clean residual min=-0.003131 max=0.003615 Jy/beam
! Clean residual mean=-0.000002 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.128795 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 34 components and 0.128795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063318Jy  sigma=1.403024
! Fit after  self-cal, rms=0.063221Jy  sigma=1.400593
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8585 mas, bmaj=2.009 mas, bpa=-5.71 degrees
! Estimated noise=0.221327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580547 Jy
! Component: 100  -  total flux cleaned = 0.00936582 Jy
! Component: 150  -  total flux cleaned = 0.0103073 Jy
! Component: 200  -  total flux cleaned = 0.0109803 Jy
! Total flux subtracted in 200 components = 0.0109803 Jy
! Clean residual min=-0.002057 max=0.002261 Jy/beam
! Clean residual mean=-0.000005 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.139775 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 55 components and 0.139775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062633Jy  sigma=1.382571
! Fit after  self-cal, rms=0.062584Jy  sigma=1.381058
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8585 x 2.009 at -5.71 degrees (North through East)
! Clean map  min=-0.0018654  max=0.068612 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.99     KP        0.99     
!   LA        1.03     MK        1.03     NL        0.95     OV        0.95     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.96     MK        1.05     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.99     
!   LA        1.00     MK        1.02     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.01     
!   LA        0.98     MK        1.00     NL        0.96     OV        0.98     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.04     KP        1.01     
!   LA        0.96     MK        1.04     NL        0.97     OV        0.95     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.99     KP        1.00     
!   LA        0.96     MK        1.03     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        1.02     KP        1.04     
!   LA        0.98     MK        1.05     NL        0.99     OV        0.97     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.01     KP        1.01     
!   LA        0.99     MK        1.04     NL        0.98     OV        0.96     
!   PT        0.97     SC        0.88     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.96     KP        1.04     
!   LA        1.01     MK        1.11     NL        0.99     OV        0.94     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.89     KP        1.07     
!   LA        0.96     MK        1.01     NL        0.94     OV        1.02     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.97     HN        0.96     KP        1.03     
!   LA        0.97     MK        1.04     NL        1.00     OV        1.01     
!   PT        0.96     SC        0.90     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        1.00     KP        1.04     
!   LA        0.94     MK        1.05     NL        0.98     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.062584Jy  sigma=1.381058
! Fit after  self-cal, rms=0.062026Jy  sigma=1.377072
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8663 mas, bmaj=2.012 mas, bpa=-5.331 degrees
! Estimated noise=0.218947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251127 Jy
! Component: 100  -  total flux cleaned = 0.000254752 Jy
! Component: 150  -  total flux cleaned = 0.000308055 Jy
! Component: 200  -  total flux cleaned = 0.000355179 Jy
! Total flux subtracted in 200 components = 0.000355179 Jy
! Clean residual min=-0.001832 max=0.001932 Jy/beam
! Clean residual mean=-0.000004 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.14013 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.14013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061920Jy  sigma=1.374315
! Fit after  self-cal, rms=0.061932Jy  sigma=1.373948
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061932Jy  sigma=1.373948
! Fit after  self-cal, rms=0.062182Jy  sigma=1.369847
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8662 mas, bmaj=2.011 mas, bpa=-5.262 degrees
! Estimated noise=0.218752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000315863 Jy
! Component: 100  -  total flux cleaned = 0.000317458 Jy
! Component: 150  -  total flux cleaned = 0.00039155 Jy
! Component: 200  -  total flux cleaned = 0.000393458 Jy
! Total flux subtracted in 200 components = 0.000393458 Jy
! Clean residual min=-0.001569 max=0.001867 Jy/beam
! Clean residual mean=-0.000002 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.140524 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.140524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062129Jy  sigma=1.368565
! Fit after  self-cal, rms=0.062150Jy  sigma=1.368266
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174432 Jy
! Component: 100  -  total flux cleaned = 0.00238438 Jy
! Component: 150  -  total flux cleaned = 0.00287068 Jy
! Component: 200  -  total flux cleaned = 0.00323043 Jy
! Total flux subtracted in 200 components = 0.00323043 Jy
! Clean residual min=-0.001443 max=0.001591 Jy/beam
! Clean residual mean=-0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.143754 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 83 components and 0.143754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062088Jy  sigma=1.366419
! Fit after  self-cal, rms=0.062078Jy  sigma=1.366059
! Inverting map 
! Added new window around map position (10.2, 6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133868 Jy
! Component: 100  -  total flux cleaned = 0.00163386 Jy
! Component: 150  -  total flux cleaned = 0.00189805 Jy
! Component: 200  -  total flux cleaned = 0.00207923 Jy
! Total flux subtracted in 200 components = 0.00207923 Jy
! Clean residual min=-0.001325 max=0.001346 Jy/beam
! Clean residual mean=-0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.145834 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 97 components and 0.145834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062029Jy  sigma=1.364881
! Fit after  self-cal, rms=0.062021Jy  sigma=1.364774
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062021Jy  sigma=1.364774
! Fit after  self-cal, rms=0.061607Jy  sigma=1.364632
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8654 mas, bmaj=2.009 mas, bpa=-5.217 degrees
! Estimated noise=0.218236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00044426 Jy
! Component: 100  -  total flux cleaned = 0.000722978 Jy
! Component: 150  -  total flux cleaned = 0.000862892 Jy
! Component: 200  -  total flux cleaned = 0.000993199 Jy
! Total flux subtracted in 200 components = 0.000993199 Jy
! Clean residual min=-0.001302 max=0.001249 Jy/beam
! Clean residual mean=-0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.146827 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 105 components and 0.146827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061581Jy  sigma=1.363970
! Fit after  self-cal, rms=0.061571Jy  sigma=1.363915
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220461 Jy
! Component: 100  -  total flux cleaned = 0.000443942 Jy
! Component: 150  -  total flux cleaned = 0.000512129 Jy
! Component: 200  -  total flux cleaned = 0.000576833 Jy
! Total flux subtracted in 200 components = 0.000576833 Jy
! Clean residual min=-0.001290 max=0.001192 Jy/beam
! Clean residual mean=-0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.147404 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 112 components and 0.147404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061554Jy  sigma=1.363491
! Fit after  self-cal, rms=0.061551Jy  sigma=1.363458
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061551Jy  sigma=1.363458
! Fit after  self-cal, rms=0.061220Jy  sigma=1.363413
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.072 mas, bmaj=3.12 mas, bpa=-1.124 degrees
! Estimated noise=0.279578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004392 Jy
! Component: 100  -  total flux cleaned = 0.000577342 Jy
! Component: 150  -  total flux cleaned = 0.00063311 Jy
! Component: 200  -  total flux cleaned = 0.000749443 Jy
! Total flux subtracted in 200 components = 0.000749443 Jy
! Clean residual min=-0.001630 max=0.001553 Jy/beam
! Clean residual mean=-0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.148153 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 124 components and 0.148153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061214Jy  sigma=1.363196
! Fit after  self-cal, rms=0.061207Jy  sigma=1.363147
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145278 Jy
! Component: 100  -  total flux cleaned = 0.000309069 Jy
! Component: 150  -  total flux cleaned = 0.000436801 Jy
! Component: 200  -  total flux cleaned = 0.000487421 Jy
! Total flux subtracted in 200 components = 0.000487421 Jy
! Clean residual min=-0.001575 max=0.001483 Jy/beam
! Clean residual mean=-0.000002 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.148641 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 130 components and 0.148641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061203Jy  sigma=1.363053
! Fit after  self-cal, rms=0.061201Jy  sigma=1.363021
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8641 mas, bmaj=2.007 mas, bpa=-5.197 degrees
! Estimated noise=0.217789 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8641 x 2.007 at -5.197 degrees (North through East)
! Clean map  min=-0.0012102  max=0.065708 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6881 mas, bmaj=1.742 mas, bpa=-4.739 degrees
! Estimated noise=0.371229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0538652 Jy
! Component: 100  -  total flux cleaned = 0.0782752 Jy
! Component: 150  -  total flux cleaned = 0.0942085 Jy
! Component: 200  -  total flux cleaned = 0.105457 Jy
! Total flux subtracted in 200 components = 0.105457 Jy
! Clean residual min=-0.003885 max=0.006311 Jy/beam
! Clean residual mean=-0.000001 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.105457 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.105457 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8641 mas, bmaj=2.007 mas, bpa=-5.197 degrees
! Estimated noise=0.217789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118834 Jy
! Component: 100  -  total flux cleaned = 0.0194844 Jy
! Component: 150  -  total flux cleaned = 0.0246434 Jy
! Component: 200  -  total flux cleaned = 0.028309 Jy
! Total flux subtracted in 200 components = 0.028309 Jy
! Clean residual min=-0.002028 max=0.002352 Jy/beam
! Clean residual mean=-0.000003 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.133766 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 43 components and 0.133766 Jy
! Inverting map 
! Added new window around map position (-21.8, -29.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283912 Jy
! Component: 100  -  total flux cleaned = 0.00493546 Jy
! Component: 150  -  total flux cleaned = 0.00617529 Jy
! Component: 200  -  total flux cleaned = 0.00725853 Jy
! Total flux subtracted in 200 components = 0.00725853 Jy
! Clean residual min=-0.001630 max=0.001535 Jy/beam
! Clean residual mean=-0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.141024 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 72 components and 0.141024 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.072 mas, bmaj=3.12 mas, bpa=-1.124 degrees
! Estimated noise=0.279578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227167 Jy
! Component: 100  -  total flux cleaned = 0.00352091 Jy
! Component: 150  -  total flux cleaned = 0.00428601 Jy
! Component: 200  -  total flux cleaned = 0.00491301 Jy
! Total flux subtracted in 200 components = 0.00491301 Jy
! Clean residual min=-0.001626 max=0.001527 Jy/beam
! Clean residual mean=-0.000002 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.145937 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554852 Jy
! Component: 100  -  total flux cleaned = 0.00104538 Jy
! Component: 150  -  total flux cleaned = 0.00147964 Jy
! Component: 200  -  total flux cleaned = 0.00179285 Jy
! Total flux subtracted in 200 components = 0.00179285 Jy
! Clean residual min=-0.001492 max=0.001451 Jy/beam
! Clean residual mean=-0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.14773 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 111 components and 0.14773 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8641 mas, bmaj=2.007 mas, bpa=-5.197 degrees
! Estimated noise=0.217789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000472884 Jy
! Component: 100  -  total flux cleaned = -0.000320036 Jy
! Component: 150  -  total flux cleaned = -0.000286697 Jy
! Component: 200  -  total flux cleaned = -0.000190572 Jy
! Total flux subtracted in 200 components = -0.000190572 Jy
! Clean residual min=-0.001349 max=0.001171 Jy/beam
! Clean residual mean=-0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.14754 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 135 components and 0.14754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061241Jy  sigma=1.363960
! Fit after  self-cal, rms=0.061219Jy  sigma=1.363255
wmodel /J1153+0914_X_map.mod
! wmodel: Unable to open new model file: /J1153+0914_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1153+0914_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8641 x 2.007 at -5.197 degrees (North through East)
! Clean map  min=-0.001195  max=0.065094 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1153+0914_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0650939 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00029644 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.36621 1.36621 2.73243 5.46485 10.9297 21.8594 43.7188 87.4376
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  219.585 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1153+0914_X_dfm.log closed on Thu May 19 22:24:28 2016