! Started logfile: /scr/pima/bg219h_uvs/J1152+3307_X_dfm.log on Thu May 19 22:24:17 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1152+3307_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1152+3307_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.903073 visibilities/baseline/integration-bin.
! Found source: J1152+3307
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22920 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1152+3307_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011618Jy  sigma=26.255779
! Fit after  self-cal, rms=0.880512Jy  sigma=22.762949
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7872 mas, bmaj=1.256 mas, bpa=-2.746 degrees
! Estimated noise=0.400839 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0920895 Jy
! Component: 100  -  total flux cleaned = 0.114754 Jy
! Total flux subtracted in 100 components = 0.114754 Jy
! Clean residual min=-0.004571 max=0.009993 Jy/beam
! Clean residual mean=0.000001 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.114754 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.114754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066132Jy  sigma=1.521581
! Fit after  self-cal, rms=0.066058Jy  sigma=1.519774
! Inverting map 
! Added new window around map position (0.2, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108379 Jy
! Component: 100  -  total flux cleaned = 0.0168477 Jy
! Total flux subtracted in 100 components = 0.0168477 Jy
! Clean residual min=-0.003263 max=0.004039 Jy/beam
! Clean residual mean=0.000000 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.131602 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 20 components and 0.131602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064073Jy  sigma=1.454197
! Fit after  self-cal, rms=0.064011Jy  sigma=1.451983
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00429356 Jy
! Component: 100  -  total flux cleaned = 0.00674913 Jy
! Total flux subtracted in 100 components = 0.00674913 Jy
! Clean residual min=-0.002949 max=0.003245 Jy/beam
! Clean residual mean=0.000000 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.138351 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 26 components and 0.138351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063686Jy  sigma=1.441153
! Fit after  self-cal, rms=0.063659Jy  sigma=1.440172
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.594 mas, bpa=-2.419 degrees
! Estimated noise=0.186959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0028631 Jy
! Component: 100  -  total flux cleaned = 0.00439258 Jy
! Component: 150  -  total flux cleaned = 0.00537604 Jy
! Component: 200  -  total flux cleaned = 0.00577597 Jy
! Total flux subtracted in 200 components = 0.00577597 Jy
! Clean residual min=-0.001814 max=0.001588 Jy/beam
! Clean residual mean=-0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.144127 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 40 components and 0.144127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063530Jy  sigma=1.436294
! Fit after  self-cal, rms=0.063524Jy  sigma=1.435975
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.016 x 1.594 at -2.419 degrees (North through East)
! Clean map  min=-0.0015961  max=0.12024 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.94     KP        1.01     
!   LA        1.01     MK        1.04     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.00     KP        0.97     
!   LA        1.02     MK        0.99     NL        1.01     OV        1.01     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        1.01     
!   LA        1.01     MK        1.05     NL        0.99     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.03     OV        0.98     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.03     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.01     OV        1.00     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.98     KP        0.99     
!   LA        1.01     MK        1.04     NL        1.02     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.97     KP        0.99     
!   LA        1.03     MK        0.99     NL        1.00     OV        1.02     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        1.00     
!   LA        1.02     MK        1.03     NL        1.02     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.97     KP        1.02     
!   LA        1.03     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.96     KP        1.01     
!   LA        0.99     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.98     KP        0.97     
!   LA        1.01     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.98     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.063524Jy  sigma=1.435975
! Fit after  self-cal, rms=0.062874Jy  sigma=1.433060
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=1.596 mas, bpa=-2.201 degrees
! Estimated noise=0.186093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205902 Jy
! Component: 100  -  total flux cleaned = -0.000234051 Jy
! Component: 150  -  total flux cleaned = -0.000234419 Jy
! Component: 200  -  total flux cleaned = -0.000235519 Jy
! Total flux subtracted in 200 components = -0.000235519 Jy
! Clean residual min=-0.001356 max=0.001468 Jy/beam
! Clean residual mean=-0.000000 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.143892 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 47 components and 0.143892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062846Jy  sigma=1.432707
! Fit after  self-cal, rms=0.062839Jy  sigma=1.432598
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062839Jy  sigma=1.432598
! Fit after  self-cal, rms=0.064640Jy  sigma=1.428144
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=1.6 mas, bpa=-2.234 degrees
! Estimated noise=0.186296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139409 Jy
! Component: 100  -  total flux cleaned = 0.000139005 Jy
! Component: 150  -  total flux cleaned = 0.000168305 Jy
! Component: 200  -  total flux cleaned = 0.000181035 Jy
! Total flux subtracted in 200 components = 0.000181035 Jy
! Clean residual min=-0.001149 max=0.001269 Jy/beam
! Clean residual mean=-0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.144073 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 52 components and 0.144073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064631Jy  sigma=1.427949
! Fit after  self-cal, rms=0.064663Jy  sigma=1.427884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111884 Jy
! Component: 100  -  total flux cleaned = 0.00151188 Jy
! Component: 150  -  total flux cleaned = 0.00172789 Jy
! Component: 200  -  total flux cleaned = 0.00188808 Jy
! Total flux subtracted in 200 components = 0.00188808 Jy
! Clean residual min=-0.001134 max=0.001047 Jy/beam
! Clean residual mean=0.000000 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.145961 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 0.145961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064639Jy  sigma=1.427238
! Fit after  self-cal, rms=0.064638Jy  sigma=1.427197
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064638Jy  sigma=1.427197
! Fit after  self-cal, rms=0.064781Jy  sigma=1.427139
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.601 mas, bpa=-2.37 degrees
! Estimated noise=0.186207 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000356883 Jy
! Component: 100  -  total flux cleaned = 0.000448435 Jy
! Component: 150  -  total flux cleaned = 0.000528278 Jy
! Component: 200  -  total flux cleaned = 0.000576438 Jy
! Total flux subtracted in 200 components = 0.000576438 Jy
! Clean residual min=-0.001128 max=0.001037 Jy/beam
! Clean residual mean=0.000000 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.146537 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 75 components and 0.146537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064772Jy  sigma=1.426994
! Fit after  self-cal, rms=0.064774Jy  sigma=1.426986
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114319 Jy
! Component: 100  -  total flux cleaned = 0.000169669 Jy
! Component: 150  -  total flux cleaned = 0.000211127 Jy
! Component: 200  -  total flux cleaned = 0.000250278 Jy
! Total flux subtracted in 200 components = 0.000250278 Jy
! Clean residual min=-0.001123 max=0.001042 Jy/beam
! Clean residual mean=0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.146787 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 0.146787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064770Jy  sigma=1.426911
! Fit after  self-cal, rms=0.064770Jy  sigma=1.426905
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064770Jy  sigma=1.426905
! Fit after  self-cal, rms=0.064861Jy  sigma=1.426890
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.715 mas, bpa=2.094 degrees
! Estimated noise=0.225243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.86153e-05 Jy
! Component: 100  -  total flux cleaned = 4.85147e-05 Jy
! Component: 150  -  total flux cleaned = 3.04537e-05 Jy
! Component: 200  -  total flux cleaned = 1.43269e-05 Jy
! Total flux subtracted in 200 components = 1.43269e-05 Jy
! Clean residual min=-0.001082 max=0.001136 Jy/beam
! Clean residual mean=0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.146802 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 90 components and 0.146802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064861Jy  sigma=1.426891
! Fit after  self-cal, rms=0.064862Jy  sigma=1.426888
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.68114e-05 Jy
! Component: 100  -  total flux cleaned = 3.9689e-05 Jy
! Component: 150  -  total flux cleaned = 3.36825e-05 Jy
! Component: 200  -  total flux cleaned = 3.39337e-05 Jy
! Total flux subtracted in 200 components = 3.39337e-05 Jy
! Clean residual min=-0.001078 max=0.001123 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.146836 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 91 components and 0.146836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064862Jy  sigma=1.426897
! Fit after  self-cal, rms=0.064862Jy  sigma=1.426896
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.602 mas, bpa=-2.412 degrees
! Estimated noise=0.186218 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.016 x 1.602 at -2.412 degrees (North through East)
! Clean map  min=-0.0010498  max=0.11975 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7871 mas, bmaj=1.262 mas, bpa=-2.779 degrees
! Estimated noise=0.398827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0914929 Jy
! Component: 100  -  total flux cleaned = 0.114806 Jy
! Component: 150  -  total flux cleaned = 0.125967 Jy
! Component: 200  -  total flux cleaned = 0.132232 Jy
! Total flux subtracted in 200 components = 0.132232 Jy
! Clean residual min=-0.002988 max=0.003152 Jy/beam
! Clean residual mean=0.000000 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.132232 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.132232 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.602 mas, bpa=-2.412 degrees
! Estimated noise=0.186218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501219 Jy
! Component: 100  -  total flux cleaned = 0.00772562 Jy
! Component: 150  -  total flux cleaned = 0.00952566 Jy
! Component: 200  -  total flux cleaned = 0.0108003 Jy
! Total flux subtracted in 200 components = 0.0108003 Jy
! Clean residual min=-0.001236 max=0.001341 Jy/beam
! Clean residual mean=-0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.143032 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 35 components and 0.143033 Jy
! Inverting map 
! Added new window around map position (0.6, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120886 Jy
! Component: 100  -  total flux cleaned = 0.00200104 Jy
! Component: 150  -  total flux cleaned = 0.00243067 Jy
! Component: 200  -  total flux cleaned = 0.00274479 Jy
! Total flux subtracted in 200 components = 0.00274479 Jy
! Clean residual min=-0.001167 max=0.001085 Jy/beam
! Clean residual mean=0.000000 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.145777 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 49 components and 0.145777 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.715 mas, bpa=2.094 degrees
! Estimated noise=0.225243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000459784 Jy
! Component: 100  -  total flux cleaned = 0.000549072 Jy
! Component: 150  -  total flux cleaned = 0.000612475 Jy
! Component: 200  -  total flux cleaned = 0.000658776 Jy
! Total flux subtracted in 200 components = 0.000658776 Jy
! Clean residual min=-0.001011 max=0.001153 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.146436 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.84602e-05 Jy
! Component: 100  -  total flux cleaned = 8.42049e-05 Jy
! Component: 150  -  total flux cleaned = 8.42259e-05 Jy
! Component: 200  -  total flux cleaned = 7.81415e-05 Jy
! Total flux subtracted in 200 components = 7.81415e-05 Jy
! Clean residual min=-0.001015 max=0.001138 Jy/beam
! Clean residual mean=0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.146514 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 79 components and 0.146514 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.602 mas, bpa=-2.412 degrees
! Estimated noise=0.186218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.38203e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107482 Jy
! Component: 150  -  total flux cleaned = 0.000199908 Jy
! Component: 200  -  total flux cleaned = 0.000271961 Jy
! Total flux subtracted in 200 components = 0.000271961 Jy
! Clean residual min=-0.001070 max=0.001070 Jy/beam
! Clean residual mean=0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.146786 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 89 components and 0.146786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064856Jy  sigma=1.426719
! Fit after  self-cal, rms=0.064855Jy  sigma=1.426679
wmodel /J1152+3307_X_map.mod
! wmodel: Unable to open new model file: /J1152+3307_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1152+3307_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.016 x 1.602 at -2.412 degrees (North through East)
! Clean map  min=-0.0010121  max=0.11967 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1152+3307_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.119671 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000245191 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.614662 0.614662 1.22932 2.45865 4.91729 9.83459 19.6692 39.3383 78.6767
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.119 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  488.073 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1152+3307_X_dfm.log closed on Thu May 19 22:24:20 2016