! Started logfile: /scr/pima/bg219h_uvs/J1110-1858_X_dfm.log on Thu May 19 22:22:30 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1110-1858_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1110-1858_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.758266 visibilities/baseline/integration-bin.
! Found source: J1110-1858
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16788 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1110-1858_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010884Jy  sigma=23.820769
! Fit after  self-cal, rms=0.885932Jy  sigma=20.723841
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6956 mas, bmaj=2.711 mas, bpa=-19.27 degrees
! Estimated noise=0.467027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0765634 Jy
! Component: 100  -  total flux cleaned = 0.111492 Jy
! Total flux subtracted in 100 components = 0.111492 Jy
! Clean residual min=-0.007807 max=0.017771 Jy/beam
! Clean residual mean=-0.000032 rms=0.002597 Jy/beam
! Combined flux in latest and established models = 0.111492 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.111492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084791Jy  sigma=1.939990
! Fit after  self-cal, rms=0.084404Jy  sigma=1.930470
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225197 Jy
! Component: 100  -  total flux cleaned = 0.0372488 Jy
! Total flux subtracted in 100 components = 0.0372488 Jy
! Clean residual min=-0.006480 max=0.017702 Jy/beam
! Clean residual mean=-0.000022 rms=0.001855 Jy/beam
! Combined flux in latest and established models = 0.14874 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 55 components and 0.14874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073820Jy  sigma=1.651270
! Fit after  self-cal, rms=0.073742Jy  sigma=1.648860
! Inverting map 
! Added new window around map position (7.6, -13.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161316 Jy
! Component: 100  -  total flux cleaned = 0.0259979 Jy
! Total flux subtracted in 100 components = 0.0259979 Jy
! Clean residual min=-0.004438 max=0.006513 Jy/beam
! Clean residual mean=-0.000016 rms=0.001337 Jy/beam
! Combined flux in latest and established models = 0.174738 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 0.174738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068672Jy  sigma=1.518854
! Fit after  self-cal, rms=0.068347Jy  sigma=1.511250
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00901979 Jy
! Component: 100  -  total flux cleaned = 0.0156584 Jy
! Total flux subtracted in 100 components = 0.0156584 Jy
! Clean residual min=-0.003891 max=0.005114 Jy/beam
! Clean residual mean=-0.000012 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.190397 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.190397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066287Jy  sigma=1.457697
! Fit after  self-cal, rms=0.066245Jy  sigma=1.456468
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9425 mas, bmaj=3.14 mas, bpa=-18.2 degrees
! Estimated noise=0.24052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101498 Jy
! Component: 100  -  total flux cleaned = 0.0173371 Jy
! Component: 150  -  total flux cleaned = 0.0227597 Jy
! Component: 200  -  total flux cleaned = 0.0269425 Jy
! Total flux subtracted in 200 components = 0.0269425 Jy
! Clean residual min=-0.003261 max=0.006380 Jy/beam
! Clean residual mean=-0.000016 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.217339 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 131 components and 0.217339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064232Jy  sigma=1.404259
! Fit after  self-cal, rms=0.064210Jy  sigma=1.403131
! Inverting map 
! Added new window around map position (2.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00587682 Jy
! Component: 100  -  total flux cleaned = 0.00949623 Jy
! Component: 150  -  total flux cleaned = 0.012359 Jy
! Component: 200  -  total flux cleaned = 0.014724 Jy
! Total flux subtracted in 200 components = 0.014724 Jy
! Clean residual min=-0.002287 max=0.002832 Jy/beam
! Clean residual mean=-0.000010 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.232063 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 169 components and 0.232063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063585Jy  sigma=1.385910
! Fit after  self-cal, rms=0.063539Jy  sigma=1.384687
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9425 x 3.14 at -18.2 degrees (North through East)
! Clean map  min=-0.002313  max=0.10825 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.99     KP        0.96     
!   LA        0.97     MK        1.03     NL        1.08     OV        1.00     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.97     KP        0.92     
!   LA        0.97     MK        1.02     NL        1.05     OV        1.03     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.02     KP        0.97     
!   LA        1.00     MK        1.03     NL        0.98     OV        0.99     
!   PT        0.95     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        0.95     
!   LA        1.00     MK        1.09     NL        1.02     OV        1.03     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.90     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.03     OV        0.98     
!   PT        0.95     SC        0.85     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.01     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.07     OV        1.02     
!   PT        0.96     SC        0.91     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.03     NL        1.04     OV        1.03     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.06     KP        0.96     
!   LA        1.00     MK        1.03     NL        1.02     OV        1.04     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.02     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.05     OV        1.01     
!   PT        0.94     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.91     KP        0.95     
!   LA        1.01     MK        1.05     NL        1.05     OV        1.03     
!   PT        0.95     SC        0.87     
! 
! 
! Fit before self-cal, rms=0.063539Jy  sigma=1.384687
! Fit after  self-cal, rms=0.063322Jy  sigma=1.377120
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9478 mas, bmaj=3.141 mas, bpa=-18 degrees
! Estimated noise=0.240923 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163919 Jy
! Component: 100  -  total flux cleaned = 0.00271561 Jy
! Component: 150  -  total flux cleaned = 0.00355748 Jy
! Component: 200  -  total flux cleaned = 0.0039517 Jy
! Total flux subtracted in 200 components = 0.0039517 Jy
! Clean residual min=-0.001811 max=0.001949 Jy/beam
! Clean residual mean=-0.000003 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.236015 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 191 components and 0.236015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063271Jy  sigma=1.375722
! Fit after  self-cal, rms=0.063263Jy  sigma=1.375524
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063263Jy  sigma=1.375524
! Fit after  self-cal, rms=0.062974Jy  sigma=1.372175
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9481 mas, bmaj=3.14 mas, bpa=-17.84 degrees
! Estimated noise=0.240471 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000345828 Jy
! Component: 100  -  total flux cleaned = 0.000428242 Jy
! Component: 150  -  total flux cleaned = 0.000576506 Jy
! Component: 200  -  total flux cleaned = 0.000668674 Jy
! Total flux subtracted in 200 components = 0.000668674 Jy
! Clean residual min=-0.001753 max=0.001795 Jy/beam
! Clean residual mean=-0.000003 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.236684 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 203 components and 0.236684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062950Jy  sigma=1.371608
! Fit after  self-cal, rms=0.062950Jy  sigma=1.371488
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.4, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000959565 Jy
! Component: 100  -  total flux cleaned = 0.000995424 Jy
! Component: 150  -  total flux cleaned = 0.00106378 Jy
! Component: 200  -  total flux cleaned = 0.00115023 Jy
! Total flux subtracted in 200 components = 0.00115023 Jy
! Clean residual min=-0.001533 max=0.001600 Jy/beam
! Clean residual mean=-0.000002 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.237834 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 223 components and 0.237834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062893Jy  sigma=1.370311
! Fit after  self-cal, rms=0.062895Jy  sigma=1.370248
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062895Jy  sigma=1.370248
! Fit after  self-cal, rms=0.062577Jy  sigma=1.371838
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9479 mas, bmaj=3.142 mas, bpa=-17.86 degrees
! Estimated noise=0.238829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000378412 Jy
! Component: 100  -  total flux cleaned = -0.000150049 Jy
! Component: 150  -  total flux cleaned = -4.53828e-05 Jy
! Component: 200  -  total flux cleaned = 5.12086e-05 Jy
! Total flux subtracted in 200 components = 5.12086e-05 Jy
! Clean residual min=-0.001528 max=0.001471 Jy/beam
! Clean residual mean=-0.000002 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.237885 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 237 components and 0.237885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062553Jy  sigma=1.371260
! Fit after  self-cal, rms=0.062562Jy  sigma=1.371202
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120344 Jy
! Component: 100  -  total flux cleaned = 0.000210948 Jy
! Component: 150  -  total flux cleaned = 0.000318442 Jy
! Component: 200  -  total flux cleaned = 0.000379494 Jy
! Total flux subtracted in 200 components = 0.000379494 Jy
! Clean residual min=-0.001551 max=0.001458 Jy/beam
! Clean residual mean=-0.000002 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.238264 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 250 components and 0.238264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062548Jy  sigma=1.370886
! Fit after  self-cal, rms=0.062550Jy  sigma=1.370870
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062550Jy  sigma=1.370870
! Fit after  self-cal, rms=0.062131Jy  sigma=1.371091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=4.779 mas, bpa=-4.652 degrees
! Estimated noise=0.286686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.42324e-05 Jy
! Component: 100  -  total flux cleaned = -5.89559e-05 Jy
! Component: 150  -  total flux cleaned = -0.000147699 Jy
! Component: 200  -  total flux cleaned = -0.000168162 Jy
! Total flux subtracted in 200 components = -0.000168162 Jy
! Clean residual min=-0.001466 max=0.001647 Jy/beam
! Clean residual mean=-0.000003 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.238096 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 264 components and 0.238096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062122Jy  sigma=1.370826
! Fit after  self-cal, rms=0.062123Jy  sigma=1.370798
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.50455e-05 Jy
! Component: 100  -  total flux cleaned = 7.38299e-05 Jy
! Component: 150  -  total flux cleaned = 5.6796e-05 Jy
! Component: 200  -  total flux cleaned = 7.26349e-05 Jy
! Total flux subtracted in 200 components = 7.26349e-05 Jy
! Clean residual min=-0.001437 max=0.001625 Jy/beam
! Clean residual mean=-0.000003 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.238169 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 276 components and 0.238169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062120Jy  sigma=1.370695
! Fit after  self-cal, rms=0.062120Jy  sigma=1.370680
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9461 mas, bmaj=3.134 mas, bpa=-17.86 degrees
! Estimated noise=0.237435 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9461 x 3.134 at -17.86 degrees (North through East)
! Clean map  min=-0.0014187  max=0.10625 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.699 mas, bmaj=2.699 mas, bpa=-18.91 degrees
! Estimated noise=0.46344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0759571 Jy
! Component: 100  -  total flux cleaned = 0.11224 Jy
! Component: 150  -  total flux cleaned = 0.13634 Jy
! Component: 200  -  total flux cleaned = 0.153812 Jy
! Total flux subtracted in 200 components = 0.153812 Jy
! Clean residual min=-0.005583 max=0.010024 Jy/beam
! Clean residual mean=-0.000019 rms=0.001676 Jy/beam
! Combined flux in latest and established models = 0.153812 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.153812 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9461 mas, bmaj=3.134 mas, bpa=-17.86 degrees
! Estimated noise=0.237435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207935 Jy
! Component: 100  -  total flux cleaned = 0.0344588 Jy
! Component: 150  -  total flux cleaned = 0.0443003 Jy
! Component: 200  -  total flux cleaned = 0.0518204 Jy
! Total flux subtracted in 200 components = 0.0518204 Jy
! Clean residual min=-0.003525 max=0.005115 Jy/beam
! Clean residual mean=-0.000017 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.205632 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 107 components and 0.205632 Jy
! Inverting map 
! Added new window around map position (-1, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00604505 Jy
! Component: 100  -  total flux cleaned = 0.0107868 Jy
! Component: 150  -  total flux cleaned = 0.0145851 Jy
! Component: 200  -  total flux cleaned = 0.017651 Jy
! Total flux subtracted in 200 components = 0.017651 Jy
! Clean residual min=-0.002189 max=0.002130 Jy/beam
! Clean residual mean=-0.000009 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.223283 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 152 components and 0.223283 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=4.779 mas, bpa=-4.652 degrees
! Estimated noise=0.286686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403702 Jy
! Component: 100  -  total flux cleaned = 0.00679938 Jy
! Component: 150  -  total flux cleaned = 0.00886299 Jy
! Component: 200  -  total flux cleaned = 0.0105344 Jy
! Total flux subtracted in 200 components = 0.0105344 Jy
! Clean residual min=-0.001950 max=0.001944 Jy/beam
! Clean residual mean=-0.000007 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.233818 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137596 Jy
! Component: 100  -  total flux cleaned = 0.00225648 Jy
! Component: 150  -  total flux cleaned = 0.00277311 Jy
! Component: 200  -  total flux cleaned = 0.00309091 Jy
! Total flux subtracted in 200 components = 0.00309091 Jy
! Clean residual min=-0.001618 max=0.001741 Jy/beam
! Clean residual mean=-0.000005 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.236909 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 234 components and 0.236909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9461 mas, bmaj=3.134 mas, bpa=-17.86 degrees
! Estimated noise=0.237435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166352 Jy
! Component: 100  -  total flux cleaned = 4.08131e-05 Jy
! Component: 150  -  total flux cleaned = 0.000257276 Jy
! Component: 200  -  total flux cleaned = 0.00051545 Jy
! Total flux subtracted in 200 components = 0.00051545 Jy
! Clean residual min=-0.001440 max=0.001459 Jy/beam
! Clean residual mean=-0.000002 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.237424 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 258 components and 0.237424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062149Jy  sigma=1.371208
! Fit after  self-cal, rms=0.062128Jy  sigma=1.370804
wmodel /J1110-1858_X_map.mod
! wmodel: Unable to open new model file: /J1110-1858_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1110-1858_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9461 x 3.134 at -17.86 degrees (North through East)
! Clean map  min=-0.0014335  max=0.10701 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1110-1858_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.107008 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000349171 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.978907 0.978907 1.95781 3.91563 7.83125 15.6625 31.325 62.65
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  306.464 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1110-1858_X_dfm.log closed on Thu May 19 22:22:33 2016