! Started logfile: /scr/pima/bg219h_uvs/J1107-1226_S_dfm.log on Thu May 19 22:22:16 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219h_uvs/J1107-1226_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J1107-1226_S_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784588 visibilities/baseline/integration-bin. ! Found source: J1107-1226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 8756 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1107-1226_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005027Jy sigma=21.584371 ! Fit after self-cal, rms=0.930419Jy sigma=19.962885 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=6.206 mas, bpa=-4.657 degrees ! Estimated noise=0.574197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0558108 Jy ! Component: 100 - total flux cleaned = 0.0680095 Jy ! Total flux subtracted in 100 components = 0.0680095 Jy ! Clean residual min=-0.004573 max=0.005767 Jy/beam ! Clean residual mean=0.000007 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.0680095 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0680095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070769Jy sigma=1.421342 ! Fit after self-cal, rms=0.069654Jy sigma=1.397393 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.259 mas, bpa=-5.172 degrees ! Estimated noise=0.394675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468792 Jy ! Component: 100 - total flux cleaned = 0.00607213 Jy ! Component: 150 - total flux cleaned = 0.0063155 Jy ! Component: 200 - total flux cleaned = 0.00621781 Jy ! Total flux subtracted in 200 components = 0.00621781 Jy ! Clean residual min=-0.003692 max=0.005114 Jy/beam ! Clean residual mean=0.000003 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.0742274 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0742273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069313Jy sigma=1.391053 ! Fit after self-cal, rms=0.069311Jy sigma=1.390860 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.882 x 7.259 at -5.172 degrees (North through East) ! Clean map min=-0.0036347 max=0.073244 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.069311Jy sigma=1.390860 ! Fit after self-cal, rms=0.069311Jy sigma=1.390860 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.259 mas, bpa=-5.172 degrees ! Estimated noise=0.394675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.51747e-05 Jy ! Component: 100 - total flux cleaned = -2.94538e-05 Jy ! Component: 150 - total flux cleaned = -0.000133215 Jy ! Component: 200 - total flux cleaned = -0.000227961 Jy ! Total flux subtracted in 200 components = -0.000227961 Jy ! Clean residual min=-0.003697 max=0.004987 Jy/beam ! Clean residual mean=0.000003 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.0739994 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.0739994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069268Jy sigma=1.390103 ! Fit after self-cal, rms=0.069264Jy sigma=1.390039 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069264Jy sigma=1.390039 ! Fit after self-cal, rms=0.068431Jy sigma=1.388535 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=7.326 mas, bpa=-5.11 degrees ! Estimated noise=0.386916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168478 Jy ! Component: 100 - total flux cleaned = -0.00232643 Jy ! Component: 150 - total flux cleaned = -0.00253773 Jy ! Component: 200 - total flux cleaned = -0.00268411 Jy ! Total flux subtracted in 200 components = -0.00268411 Jy ! Clean residual min=-0.003395 max=0.004463 Jy/beam ! Clean residual mean=0.000006 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.0713153 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.0713153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068394Jy sigma=1.387447 ! Fit after self-cal, rms=0.068405Jy sigma=1.387230 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (87, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390121 Jy ! Component: 100 - total flux cleaned = 0.00581339 Jy ! Component: 150 - total flux cleaned = 0.00627021 Jy ! Component: 200 - total flux cleaned = 0.00658096 Jy ! Total flux subtracted in 200 components = 0.00658096 Jy ! Clean residual min=-0.003260 max=0.003953 Jy/beam ! Clean residual mean=0.000005 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0778962 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 58 components and 0.0778962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068164Jy sigma=1.382542 ! Fit after self-cal, rms=0.068122Jy sigma=1.381359 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068122Jy sigma=1.381359 ! Fit after self-cal, rms=0.068007Jy sigma=1.381229 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.335 mas, bpa=-5.065 degrees ! Estimated noise=0.386487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142837 Jy ! Component: 100 - total flux cleaned = 0.00169515 Jy ! Component: 150 - total flux cleaned = 0.00173349 Jy ! Component: 200 - total flux cleaned = 0.00173356 Jy ! Total flux subtracted in 200 components = 0.00173356 Jy ! Clean residual min=-0.003246 max=0.003325 Jy/beam ! Clean residual mean=0.000005 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.0796298 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 67 components and 0.0796298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067945Jy sigma=1.380053 ! Fit after self-cal, rms=0.067935Jy sigma=1.379830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000697826 Jy ! Component: 100 - total flux cleaned = 0.000728873 Jy ! Component: 150 - total flux cleaned = 0.000702273 Jy ! Component: 200 - total flux cleaned = 0.000652647 Jy ! Total flux subtracted in 200 components = 0.000652647 Jy ! Clean residual min=-0.003243 max=0.003077 Jy/beam ! Clean residual mean=0.000005 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.0802824 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 0.0802825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067908Jy sigma=1.379357 ! Fit after self-cal, rms=0.067906Jy sigma=1.379294 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067906Jy sigma=1.379294 ! Fit after self-cal, rms=0.067861Jy sigma=1.379256 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.998 mas, bmaj=13.64 mas, bpa=-3.467 degrees ! Estimated noise=0.513286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000714037 Jy ! Component: 100 - total flux cleaned = -0.000719972 Jy ! Component: 150 - total flux cleaned = -0.000752518 Jy ! Component: 200 - total flux cleaned = -0.0007826 Jy ! Total flux subtracted in 200 components = -0.0007826 Jy ! Clean residual min=-0.004454 max=0.004388 Jy/beam ! Clean residual mean=0.000014 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.0794999 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.0794999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067868Jy sigma=1.379523 ! Fit after self-cal, rms=0.067862Jy sigma=1.379439 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243473 Jy ! Component: 100 - total flux cleaned = 0.000215499 Jy ! Component: 150 - total flux cleaned = 0.00021594 Jy ! Component: 200 - total flux cleaned = 0.000217515 Jy ! Total flux subtracted in 200 components = 0.000217515 Jy ! Clean residual min=-0.004445 max=0.004302 Jy/beam ! Clean residual mean=0.000015 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.0797174 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 0.0797174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067873Jy sigma=1.379883 ! Fit after self-cal, rms=0.067872Jy sigma=1.379863 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.337 mas, bpa=-5.048 degrees ! Estimated noise=0.386384 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.908 x 7.337 at -5.048 degrees (North through East) ! Clean map min=-0.0035023 max=0.071981 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.432 mas, bmaj=6.259 mas, bpa=-4.529 degrees ! Estimated noise=0.56465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554978 Jy ! Component: 100 - total flux cleaned = 0.0680453 Jy ! Component: 150 - total flux cleaned = 0.0730914 Jy ! Component: 200 - total flux cleaned = 0.0756678 Jy ! Total flux subtracted in 200 components = 0.0756678 Jy ! Clean residual min=-0.003985 max=0.005031 Jy/beam ! Clean residual mean=0.000005 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.0756678 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0756678 Jy ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.337 mas, bpa=-5.048 degrees ! Estimated noise=0.386384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49.5, 51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384626 Jy ! Component: 100 - total flux cleaned = 0.00482282 Jy ! Component: 150 - total flux cleaned = 0.00533883 Jy ! Component: 200 - total flux cleaned = 0.00553237 Jy ! Total flux subtracted in 200 components = 0.00553237 Jy ! Clean residual min=-0.003231 max=0.003506 Jy/beam ! Clean residual mean=0.000007 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.0812002 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.0812001 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.998 mas, bmaj=13.64 mas, bpa=-3.467 degrees ! Estimated noise=0.513286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311029 Jy ! Component: 100 - total flux cleaned = -4.29779e-05 Jy ! Component: 150 - total flux cleaned = -0.000203992 Jy ! Component: 200 - total flux cleaned = -0.000402546 Jy ! Total flux subtracted in 200 components = -0.000402546 Jy ! Clean residual min=-0.004574 max=0.004648 Jy/beam ! Clean residual mean=0.000016 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.0807976 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.23616e-05 Jy ! Component: 100 - total flux cleaned = -0.000181455 Jy ! Component: 150 - total flux cleaned = -0.000307738 Jy ! Component: 200 - total flux cleaned = -0.000388003 Jy ! Total flux subtracted in 200 components = -0.000388003 Jy ! Clean residual min=-0.004518 max=0.004324 Jy/beam ! Clean residual mean=0.000015 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.0804096 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 77 components and 0.0804096 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.337 mas, bpa=-5.048 degrees ! Estimated noise=0.386384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.4116e-05 Jy ! Component: 100 - total flux cleaned = 6.51931e-05 Jy ! Component: 150 - total flux cleaned = 1.75712e-05 Jy ! Component: 200 - total flux cleaned = 1.6658e-05 Jy ! Total flux subtracted in 200 components = 1.6658e-05 Jy ! Clean residual min=-0.003380 max=0.003399 Jy/beam ! Clean residual mean=0.000006 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.0804262 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.0804262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067799Jy sigma=1.378592 ! Fit after self-cal, rms=0.067799Jy sigma=1.378095 wmodel /J1107-1226_S_map.mod ! wmodel: Unable to open new model file: /J1107-1226_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J1107-1226_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.908 x 7.337 at -5.048 degrees (North through East) ! Clean map min=-0.0031292 max=0.070632 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1107-1226_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0706319 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000809721 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.43919 3.43919 6.87838 13.7568 27.5135 55.027 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.07 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 87.229 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J1107-1226_S_dfm.log closed on Thu May 19 22:22:19 2016