! Started logfile: /scr/pima/bg219h_uvs/J1044+8054_S_uvs.log on Thu Apr  7 09:00:19 2016
obs /scr/pima/bg219h_uvs/J1044+8054_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1044+8054_S_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.787302 visibilities/baseline/integration-bin.
! Found source: J1044+8054
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 992 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1044+8054_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.246643Jy  sigma=18.202343
! Fit after  self-cal, rms=0.229538Jy  sigma=3.034685
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.409 mas, bmaj=10.82 mas, bpa=-64.43 degrees
! Estimated noise=2.52075 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.635088 Jy
! Component: 100  -  total flux cleaned = 0.777496 Jy
! Total flux subtracted in 100 components = 0.777496 Jy
! Clean residual min=-0.031583 max=0.050686 Jy/beam
! Clean residual mean=0.000242 rms=0.009192 Jy/beam
! Combined flux in latest and established models = 0.777496 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.777496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172700Jy  sigma=2.297661
! Fit after  self-cal, rms=0.172588Jy  sigma=2.297258
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.801 mas, bmaj=11.05 mas, bpa=-65.65 degrees
! Estimated noise=1.99005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0740406 Jy
! Component: 100  -  total flux cleaned = 0.106016 Jy
! Component: 150  -  total flux cleaned = 0.124217 Jy
! Component: 200  -  total flux cleaned = 0.13765 Jy
! Total flux subtracted in 200 components = 0.13765 Jy
! Clean residual min=-0.019642 max=0.022018 Jy/beam
! Clean residual mean=0.000041 rms=0.005485 Jy/beam
! Combined flux in latest and established models = 0.915146 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 44 components and 0.915146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143482Jy  sigma=1.753446
! Fit after  self-cal, rms=0.143256Jy  sigma=1.749065
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.801 x 11.05 at -65.65 degrees (North through East)
! Clean map  min=-0.017006  max=0.84061 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        0.96     KP        0.92     
!   LA        1.08     MK        1.01     NL        0.93     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        1.00     KP        0.97     
!   LA        1.07     MK        0.99     NL        0.93     OV        0.99     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        0.96     KP        0.96     
!   LA        1.09     MK        1.01     NL        0.90     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        0.99     KP        0.96     
!   LA        1.08     MK        1.00     NL        1.02     OV        1.04     
!   PT        1.02     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.143256Jy  sigma=1.749065
! Fit after  self-cal, rms=0.140792Jy  sigma=1.619403
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=11.1 mas, bpa=-65.71 degrees
! Estimated noise=1.9663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00600233 Jy
! Component: 100  -  total flux cleaned = 0.00484727 Jy
! Component: 150  -  total flux cleaned = 0.00431993 Jy
! Component: 200  -  total flux cleaned = 0.00421802 Jy
! Total flux subtracted in 200 components = 0.00421802 Jy
! Clean residual min=-0.010386 max=0.010117 Jy/beam
! Clean residual mean=0.000053 rms=0.002558 Jy/beam
! Combined flux in latest and established models = 0.919364 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.919364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140140Jy  sigma=1.613830
! Fit after  self-cal, rms=0.140166Jy  sigma=1.613501
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140166Jy  sigma=1.613501
! Fit after  self-cal, rms=0.140094Jy  sigma=1.612206
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.811 mas, bmaj=11.11 mas, bpa=-65.73 degrees
! Estimated noise=1.96218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102039 Jy
! Component: 100  -  total flux cleaned = 0.0006742 Jy
! Component: 150  -  total flux cleaned = 0.000513385 Jy
! Component: 200  -  total flux cleaned = 0.000508015 Jy
! Total flux subtracted in 200 components = 0.000508015 Jy
! Clean residual min=-0.010023 max=0.009477 Jy/beam
! Clean residual mean=0.000053 rms=0.002502 Jy/beam
! Combined flux in latest and established models = 0.919872 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.919872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139812Jy  sigma=1.611729
! Fit after  self-cal, rms=0.139824Jy  sigma=1.611657
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000416552 Jy
! Component: 100  -  total flux cleaned = 0.000202989 Jy
! Component: 150  -  total flux cleaned = 0.000106845 Jy
! Component: 200  -  total flux cleaned = 0.000106542 Jy
! Total flux subtracted in 200 components = 0.000106542 Jy
! Clean residual min=-0.009780 max=0.009195 Jy/beam
! Clean residual mean=0.000053 rms=0.002495 Jy/beam
! Combined flux in latest and established models = 0.919979 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 0.919979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139751Jy  sigma=1.611597
! Fit after  self-cal, rms=0.139760Jy  sigma=1.611563
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139760Jy  sigma=1.611563
! Fit after  self-cal, rms=0.139478Jy  sigma=1.610674
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.811 mas, bmaj=11.11 mas, bpa=-65.74 degrees
! Estimated noise=1.95565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00121917 Jy
! Component: 100  -  total flux cleaned = -0.00108294 Jy
! Component: 150  -  total flux cleaned = -0.00108225 Jy
! Component: 200  -  total flux cleaned = -0.00108209 Jy
! Total flux subtracted in 200 components = -0.00108209 Jy
! Clean residual min=-0.009695 max=0.009157 Jy/beam
! Clean residual mean=0.000052 rms=0.002477 Jy/beam
! Combined flux in latest and established models = 0.918897 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 0.918897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139278Jy  sigma=1.611214
! Fit after  self-cal, rms=0.139287Jy  sigma=1.611172
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.76769e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122921 Jy
! Component: 150  -  total flux cleaned = 0.000123275 Jy
! Component: 200  -  total flux cleaned = 0.00015692 Jy
! Total flux subtracted in 200 components = 0.00015692 Jy
! Clean residual min=-0.009640 max=0.009128 Jy/beam
! Clean residual mean=0.000052 rms=0.002474 Jy/beam
! Combined flux in latest and established models = 0.919054 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 89 components and 0.919054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139253Jy  sigma=1.611167
! Fit after  self-cal, rms=0.139259Jy  sigma=1.611154
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139259Jy  sigma=1.611154
! Fit after  self-cal, rms=0.138936Jy  sigma=1.610361
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.798 mas, bmaj=12.7 mas, bpa=-64.67 degrees
! Estimated noise=2.69587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194276 Jy
! Component: 100  -  total flux cleaned = 0.000635657 Jy
! Component: 150  -  total flux cleaned = 0.000679995 Jy
! Component: 200  -  total flux cleaned = 0.000810451 Jy
! Total flux subtracted in 200 components = 0.000810451 Jy
! Clean residual min=-0.012552 max=0.011978 Jy/beam
! Clean residual mean=0.000125 rms=0.003993 Jy/beam
! Combined flux in latest and established models = 0.919864 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 101 components and 0.919864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138818Jy  sigma=1.610579
! Fit after  self-cal, rms=0.138820Jy  sigma=1.610531
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.65766e-06 Jy
! Component: 100  -  total flux cleaned = -5.31478e-06 Jy
! Component: 150  -  total flux cleaned = 3.47208e-05 Jy
! Component: 200  -  total flux cleaned = 0.000111457 Jy
! Total flux subtracted in 200 components = 0.000111457 Jy
! Clean residual min=-0.012508 max=0.011938 Jy/beam
! Clean residual mean=0.000125 rms=0.003984 Jy/beam
! Combined flux in latest and established models = 0.919976 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 106 components and 0.919976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138835Jy  sigma=1.610416
! Fit after  self-cal, rms=0.138839Jy  sigma=1.610376
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.81 mas, bmaj=11.12 mas, bpa=-65.74 degrees
! Estimated noise=1.94866 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.81 x 11.12 at -65.74 degrees (North through East)
! Clean map  min=-0.0095885  max=0.82307 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138839Jy  sigma=1.610376
! Fit after  self-cal, rms=0.132947Jy  sigma=1.506503
! Inverting map and beam 
! Estimated beam: bmin=2.816 mas, bmaj=11.1 mas, bpa=-65.7 degrees
! Estimated noise=1.91428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0125159 Jy
! Component: 100  -  total flux cleaned = -0.0142285 Jy
! Component: 150  -  total flux cleaned = -0.0153546 Jy
! Component: 200  -  total flux cleaned = -0.0162303 Jy
! Total flux subtracted in 200 components = -0.0162303 Jy
! Clean residual min=-0.014059 max=0.013592 Jy/beam
! Clean residual mean=0.000034 rms=0.003936 Jy/beam
! Combined flux in latest and established models = 0.903745 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.903745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131117Jy  sigma=1.497691
! Fit after  self-cal, rms=0.131125Jy  sigma=1.497646
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000860687 Jy
! Component: 100  -  total flux cleaned = -0.00153343 Jy
! Component: 150  -  total flux cleaned = -0.00203214 Jy
! Component: 200  -  total flux cleaned = -0.00239329 Jy
! Total flux subtracted in 200 components = -0.00239329 Jy
! Clean residual min=-0.014156 max=0.013573 Jy/beam
! Clean residual mean=0.000035 rms=0.003927 Jy/beam
! Combined flux in latest and established models = 0.901352 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 134 components and 0.901352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131010Jy  sigma=1.498000
! Fit after  self-cal, rms=0.131019Jy  sigma=1.497956
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131019Jy  sigma=1.497956
! Fit after  self-cal, rms=0.129844Jy  sigma=1.480423
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.421 mas, bmaj=10.85 mas, bpa=-64.44 degrees
! Estimated noise=2.40301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.60537 Jy
! Component: 100  -  total flux cleaned = 0.74061 Jy
! Component: 150  -  total flux cleaned = 0.789556 Jy
! Component: 200  -  total flux cleaned = 0.803738 Jy
! Total flux subtracted in 200 components = 0.803738 Jy
! Clean residual min=-0.020556 max=0.022730 Jy/beam
! Clean residual mean=0.000188 rms=0.006949 Jy/beam
! Combined flux in latest and established models = 0.803738 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.803738 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.817 mas, bmaj=11.09 mas, bpa=-65.69 degrees
! Estimated noise=1.88185 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0265907 Jy
! Component: 100  -  total flux cleaned = 0.0416019 Jy
! Component: 150  -  total flux cleaned = 0.0519094 Jy
! Component: 200  -  total flux cleaned = 0.0596214 Jy
! Total flux subtracted in 200 components = 0.0596214 Jy
! Clean residual min=-0.014423 max=0.015068 Jy/beam
! Clean residual mean=0.000037 rms=0.004031 Jy/beam
! Combined flux in latest and established models = 0.863359 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 49 components and 0.863359 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.807 mas, bmaj=12.69 mas, bpa=-64.65 degrees
! Estimated noise=2.59712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0088995 Jy
! Component: 100  -  total flux cleaned = 0.0137119 Jy
! Component: 150  -  total flux cleaned = 0.016655 Jy
! Component: 200  -  total flux cleaned = 0.0175358 Jy
! Total flux subtracted in 200 components = 0.0175358 Jy
! Clean residual min=-0.020727 max=0.021743 Jy/beam
! Clean residual mean=0.000061 rms=0.007009 Jy/beam
! Combined flux in latest and established models = 0.880895 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000701487 Jy
! Component: 100  -  total flux cleaned = 0.000999738 Jy
! Component: 150  -  total flux cleaned = 0.00110964 Jy
! Component: 200  -  total flux cleaned = 0.00121269 Jy
! Total flux subtracted in 200 components = 0.00121269 Jy
! Clean residual min=-0.020592 max=0.021281 Jy/beam
! Clean residual mean=0.000059 rms=0.006987 Jy/beam
! Combined flux in latest and established models = 0.882108 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 70 components and 0.882108 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.817 mas, bmaj=11.09 mas, bpa=-65.69 degrees
! Estimated noise=1.88185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116494 Jy
! Component: 100  -  total flux cleaned = 0.00147928 Jy
! Component: 150  -  total flux cleaned = 0.00138533 Jy
! Component: 200  -  total flux cleaned = 0.00138306 Jy
! Total flux subtracted in 200 components = 0.00138306 Jy
! Clean residual min=-0.013965 max=0.013376 Jy/beam
! Clean residual mean=0.000027 rms=0.003895 Jy/beam
! Combined flux in latest and established models = 0.883491 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 79 components and 0.883491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128575Jy  sigma=1.476005
! Fit after  self-cal, rms=0.128544Jy  sigma=1.475583
wmodel /scr/pima/bg219h_uvs/J1044+8054_S_map.mod
! Writing 79 model components to file: /scr/pima/bg219h_uvs/J1044+8054_S_map.mod
wobs /scr/pima/bg219h_uvs/J1044+8054_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1044+8054_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J1044+8054_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219h_uvs/J1044+8054_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -6.46624e-05 Jy
! Component: 100  -  total flux cleaned = 0.000380243 Jy
! Component: 150  -  total flux cleaned = 0.00079256 Jy
! Component: 200  -  total flux cleaned = 0.000985147 Jy
! Component: 250  -  total flux cleaned = 0.00205939 Jy
! Component: 300  -  total flux cleaned = 0.0025688 Jy
! Component: 350  -  total flux cleaned = 0.00288858 Jy
! Component: 400  -  total flux cleaned = 0.00332607 Jy
! Component: 450  -  total flux cleaned = 0.00401313 Jy
! Component: 500  -  total flux cleaned = 0.00401141 Jy
! Component: 550  -  total flux cleaned = 0.00426125 Jy
! Component: 600  -  total flux cleaned = 0.00461205 Jy
! Component: 650  -  total flux cleaned = 0.00483568 Jy
! Component: 700  -  total flux cleaned = 0.00504139 Jy
! Component: 750  -  total flux cleaned = 0.00544121 Jy
! Component: 800  -  total flux cleaned = 0.00591483 Jy
! Component: 850  -  total flux cleaned = 0.00637362 Jy
! Component: 900  -  total flux cleaned = 0.00698831 Jy
! Component: 950  -  total flux cleaned = 0.0075767 Jy
! Component: 1000  -  total flux cleaned = 0.00798143 Jy
! Component: 1050  -  total flux cleaned = 0.00837268 Jy
! Component: 1100  -  total flux cleaned = 0.00882621 Jy
! Component: 1150  -  total flux cleaned = 0.00911834 Jy
! Component: 1200  -  total flux cleaned = 0.00925973 Jy
! Component: 1250  -  total flux cleaned = 0.00912248 Jy
! Component: 1300  -  total flux cleaned = 0.00912173 Jy
! Component: 1350  -  total flux cleaned = 0.00905708 Jy
! Component: 1400  -  total flux cleaned = 0.00867846 Jy
! Component: 1450  -  total flux cleaned = 0.00861823 Jy
! Component: 1500  -  total flux cleaned = 0.00837617 Jy
! Component: 1550  -  total flux cleaned = 0.00819827 Jy
! Component: 1600  -  total flux cleaned = 0.0077368 Jy
! Component: 1650  -  total flux cleaned = 0.00745493 Jy
! Component: 1700  -  total flux cleaned = 0.0071799 Jy
! Component: 1750  -  total flux cleaned = 0.00690947 Jy
! Component: 1800  -  total flux cleaned = 0.00674945 Jy
! Component: 1850  -  total flux cleaned = 0.00659289 Jy
! Component: 1900  -  total flux cleaned = 0.00649129 Jy
! Component: 1950  -  total flux cleaned = 0.00659199 Jy
! Component: 2000  -  total flux cleaned = 0.00654362 Jy
! Component: 2050  -  total flux cleaned = 0.00664099 Jy
! Component: 2100  -  total flux cleaned = 0.00668856 Jy
! Component: 2150  -  total flux cleaned = 0.00654823 Jy
! Component: 2200  -  total flux cleaned = 0.00664073 Jy
! Component: 2250  -  total flux cleaned = 0.00668538 Jy
! Component: 2300  -  total flux cleaned = 0.00655099 Jy
! Component: 2350  -  total flux cleaned = 0.00677257 Jy
! Component: 2400  -  total flux cleaned = 0.00677152 Jy
! Component: 2450  -  total flux cleaned = 0.00664123 Jy
! Component: 2500  -  total flux cleaned = 0.00664146 Jy
! Component: 2550  -  total flux cleaned = 0.00664166 Jy
! Component: 2600  -  total flux cleaned = 0.00680756 Jy
! Component: 2650  -  total flux cleaned = 0.00693006 Jy
! Component: 2700  -  total flux cleaned = 0.00693043 Jy
! Component: 2750  -  total flux cleaned = 0.00713019 Jy
! Component: 2800  -  total flux cleaned = 0.00720873 Jy
! Component: 2850  -  total flux cleaned = 0.00720838 Jy
! Component: 2900  -  total flux cleaned = 0.00736349 Jy
! Component: 2950  -  total flux cleaned = 0.00740185 Jy
! Component: 3000  -  total flux cleaned = 0.00751637 Jy
! Component: 3050  -  total flux cleaned = 0.00770514 Jy
! Component: 3100  -  total flux cleaned = 0.00789187 Jy
! Component: 3150  -  total flux cleaned = 0.00800315 Jy
! Component: 3200  -  total flux cleaned = 0.00815019 Jy
! Component: 3250  -  total flux cleaned = 0.00826001 Jy
! Component: 3300  -  total flux cleaned = 0.00844201 Jy
! Component: 3350  -  total flux cleaned = 0.00865858 Jy
! Component: 3400  -  total flux cleaned = 0.00880165 Jy
! Component: 3450  -  total flux cleaned = 0.00887302 Jy
! Component: 3500  -  total flux cleaned = 0.00901428 Jy
! Component: 3550  -  total flux cleaned = 0.00915498 Jy
! Component: 3600  -  total flux cleaned = 0.00936506 Jy
! Component: 3650  -  total flux cleaned = 0.00950369 Jy
! Component: 3700  -  total flux cleaned = 0.00967662 Jy
! Component: 3750  -  total flux cleaned = 0.0096766 Jy
! Component: 3800  -  total flux cleaned = 0.00981404 Jy
! Component: 3850  -  total flux cleaned = 0.0100531 Jy
! Component: 3900  -  total flux cleaned = 0.0102908 Jy
! Component: 3950  -  total flux cleaned = 0.01046 Jy
! Component: 4000  -  total flux cleaned = 0.0106284 Jy
! Component: 4050  -  total flux cleaned = 0.0107627 Jy
! Total flux subtracted in 4096 components = 0.0108967 Jy
! Clean residual min=-0.001731 max=0.001857 Jy/beam
! Clean residual mean=0.000011 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.894387 Jy
keep
! Adding 300 model components to the UV plane model.
! The established model now contains 379 components and 0.894387 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1044+8054_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.817 x 11.09 at -65.69 degrees (North through East)
! Clean map  min=-0.0058391  max=0.79479 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1044+8054_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.794794 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00059076 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.222986 0.222986 0.445973 0.891945 1.78389 3.56778 7.13556 14.2711 28.5422 57.0845
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.794 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1345.37 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1044+8054_S_uvs.log closed on Thu Apr  7 09:00:24 2016