! Started logfile: /scr/pima/bg219h_uvs/J1041+2101_X_dfm.log on Thu May 19 22:21:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1041+2101_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1041+2101_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.936918 visibilities/baseline/integration-bin.
! Found source: J1041+2101
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 31368 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1041+2101_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012297Jy  sigma=25.013334
! Fit after  self-cal, rms=0.868792Jy  sigma=21.446548
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7549 mas, bmaj=1.435 mas, bpa=-3.054 degrees
! Estimated noise=0.391396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.09461 Jy
! Component: 100  -  total flux cleaned = 0.126058 Jy
! Total flux subtracted in 100 components = 0.126058 Jy
! Clean residual min=-0.005818 max=0.013808 Jy/beam
! Clean residual mean=-0.000007 rms=0.001446 Jy/beam
! Combined flux in latest and established models = 0.126058 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.126058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067609Jy  sigma=1.559236
! Fit after  self-cal, rms=0.067335Jy  sigma=1.552189
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161594 Jy
! Component: 100  -  total flux cleaned = 0.0243035 Jy
! Total flux subtracted in 100 components = 0.0243035 Jy
! Clean residual min=-0.003676 max=0.004521 Jy/beam
! Clean residual mean=-0.000003 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.150362 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.150362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062593Jy  sigma=1.423198
! Fit after  self-cal, rms=0.062507Jy  sigma=1.420906
! Inverting map 
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0051811 Jy
! Component: 100  -  total flux cleaned = 0.00803049 Jy
! Total flux subtracted in 100 components = 0.00803049 Jy
! Clean residual min=-0.003184 max=0.004221 Jy/beam
! Clean residual mean=-0.000002 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.158392 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 13 components and 0.158392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061994Jy  sigma=1.407676
! Fit after  self-cal, rms=0.061969Jy  sigma=1.407007
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9922 mas, bmaj=1.8 mas, bpa=-2.251 degrees
! Estimated noise=0.174674 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00439044 Jy
! Component: 100  -  total flux cleaned = 0.00661512 Jy
! Component: 150  -  total flux cleaned = 0.00782168 Jy
! Component: 200  -  total flux cleaned = 0.00841754 Jy
! Total flux subtracted in 200 components = 0.00841754 Jy
! Clean residual min=-0.002036 max=0.003342 Jy/beam
! Clean residual mean=-0.000004 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.16681 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 41 components and 0.16681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061630Jy  sigma=1.399002
! Fit after  self-cal, rms=0.061602Jy  sigma=1.398273
! Inverting map 
! Added new window around map position (-4.6, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354358 Jy
! Component: 100  -  total flux cleaned = 0.00525 Jy
! Component: 150  -  total flux cleaned = 0.00610645 Jy
! Component: 200  -  total flux cleaned = 0.00667979 Jy
! Total flux subtracted in 200 components = 0.00667979 Jy
! Clean residual min=-0.001739 max=0.001894 Jy/beam
! Clean residual mean=-0.000004 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.17349 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 73 components and 0.17349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061394Jy  sigma=1.392585
! Fit after  self-cal, rms=0.061370Jy  sigma=1.392020
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9922 x 1.8 at -2.251 degrees (North through East)
! Clean map  min=-0.0017096  max=0.13017 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.96     KP        1.00     
!   LA        1.03     MK        1.04     NL        1.01     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.94     KP        0.97     
!   LA        1.02     MK        1.06     NL        1.00     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.96     KP        1.03     
!   LA        1.00     MK        1.03     NL        0.99     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.94     KP        0.99     
!   LA        1.00     MK        1.10     NL        1.01     OV        1.02     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.92     KP        0.99     
!   LA        1.04     MK        1.05     NL        1.00     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.93     KP        1.00     
!   LA        1.02     MK        1.06     NL        1.02     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.96     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.93     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.03     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.98     KP        0.98     
!   LA        0.98     MK        1.06     NL        0.99     OV        1.01     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.93     KP        1.00     
!   LA        1.00     MK        1.07     NL        0.99     OV        1.02     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.92     KP        1.01     
!   LA        1.01     MK        1.05     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.93     KP        0.94     
!   LA        0.97     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.061370Jy  sigma=1.392020
! Fit after  self-cal, rms=0.060348Jy  sigma=1.387118
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9986 mas, bmaj=1.799 mas, bpa=-1.896 degrees
! Estimated noise=0.174372 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130338 Jy
! Component: 100  -  total flux cleaned = 0.00182664 Jy
! Component: 150  -  total flux cleaned = 0.00213506 Jy
! Component: 200  -  total flux cleaned = 0.0022956 Jy
! Total flux subtracted in 200 components = 0.0022956 Jy
! Clean residual min=-0.001157 max=0.001266 Jy/beam
! Clean residual mean=-0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.175785 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 0.175785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060307Jy  sigma=1.386088
! Fit after  self-cal, rms=0.060292Jy  sigma=1.385980
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060292Jy  sigma=1.385980
! Fit after  self-cal, rms=0.060214Jy  sigma=1.383631
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9925 mas, bmaj=1.792 mas, bpa=-2.442 degrees
! Estimated noise=0.173886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000407547 Jy
! Component: 100  -  total flux cleaned = 0.00058707 Jy
! Component: 150  -  total flux cleaned = 0.000730431 Jy
! Component: 200  -  total flux cleaned = 0.000821225 Jy
! Total flux subtracted in 200 components = 0.000821225 Jy
! Clean residual min=-0.001248 max=0.001119 Jy/beam
! Clean residual mean=-0.000002 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.176606 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 109 components and 0.176606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060200Jy  sigma=1.383273
! Fit after  self-cal, rms=0.060203Jy  sigma=1.383233
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.74327e-05 Jy
! Component: 100  -  total flux cleaned = 0.000164525 Jy
! Component: 150  -  total flux cleaned = 0.000189776 Jy
! Component: 200  -  total flux cleaned = 0.00023718 Jy
! Total flux subtracted in 200 components = 0.00023718 Jy
! Clean residual min=-0.001237 max=0.001096 Jy/beam
! Clean residual mean=-0.000002 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.176844 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 0.176844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060198Jy  sigma=1.383112
! Fit after  self-cal, rms=0.060198Jy  sigma=1.383108
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060198Jy  sigma=1.383108
! Fit after  self-cal, rms=0.060122Jy  sigma=1.383063
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9918 mas, bmaj=1.79 mas, bpa=-2.487 degrees
! Estimated noise=0.173699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.1294e-06 Jy
! Component: 100  -  total flux cleaned = 3.71196e-05 Jy
! Component: 150  -  total flux cleaned = 7.16514e-05 Jy
! Component: 200  -  total flux cleaned = 0.000103113 Jy
! Total flux subtracted in 200 components = 0.000103113 Jy
! Clean residual min=-0.001203 max=0.001073 Jy/beam
! Clean residual mean=-0.000002 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.176947 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 130 components and 0.176947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060117Jy  sigma=1.382950
! Fit after  self-cal, rms=0.060116Jy  sigma=1.382942
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.17004e-05 Jy
! Component: 100  -  total flux cleaned = 4.17926e-05 Jy
! Component: 150  -  total flux cleaned = 5.15015e-05 Jy
! Component: 200  -  total flux cleaned = 6.95907e-05 Jy
! Total flux subtracted in 200 components = 6.95907e-05 Jy
! Clean residual min=-0.001199 max=0.001060 Jy/beam
! Clean residual mean=-0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.177016 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 137 components and 0.177016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060113Jy  sigma=1.382877
! Fit after  self-cal, rms=0.060113Jy  sigma=1.382875
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060113Jy  sigma=1.382875
! Fit after  self-cal, rms=0.060077Jy  sigma=1.382863
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.097 mas, bmaj=2.831 mas, bpa=-3.456 degrees
! Estimated noise=0.211384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000452674 Jy
! Component: 100  -  total flux cleaned = 0.000472988 Jy
! Component: 150  -  total flux cleaned = 0.000489669 Jy
! Component: 200  -  total flux cleaned = 0.00049628 Jy
! Total flux subtracted in 200 components = 0.00049628 Jy
! Clean residual min=-0.001159 max=0.001486 Jy/beam
! Clean residual mean=-0.000004 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.177513 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 155 components and 0.177513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060077Jy  sigma=1.382853
! Fit after  self-cal, rms=0.060077Jy  sigma=1.382847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.6, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132805 Jy
! Component: 100  -  total flux cleaned = 0.00203616 Jy
! Component: 150  -  total flux cleaned = 0.00254877 Jy
! Component: 200  -  total flux cleaned = 0.00296191 Jy
! Total flux subtracted in 200 components = 0.00296191 Jy
! Clean residual min=-0.001037 max=0.000976 Jy/beam
! Clean residual mean=-0.000005 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.180474 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 190 components and 0.180474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060057Jy  sigma=1.382380
! Fit after  self-cal, rms=0.060056Jy  sigma=1.382352
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9915 mas, bmaj=1.79 mas, bpa=-2.525 degrees
! Estimated noise=0.173598 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9915 x 1.79 at -2.525 degrees (North through East)
! Clean map  min=-0.0010395  max=0.12952 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7554 mas, bmaj=1.43 mas, bpa=-3.474 degrees
! Estimated noise=0.388114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0940016 Jy
! Component: 100  -  total flux cleaned = 0.127218 Jy
! Component: 150  -  total flux cleaned = 0.142928 Jy
! Component: 200  -  total flux cleaned = 0.150796 Jy
! Total flux subtracted in 200 components = 0.150796 Jy
! Clean residual min=-0.003259 max=0.003723 Jy/beam
! Clean residual mean=-0.000003 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.150797 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.150797 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9915 mas, bmaj=1.79 mas, bpa=-2.525 degrees
! Estimated noise=0.173598 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695688 Jy
! Component: 100  -  total flux cleaned = 0.011437 Jy
! Component: 150  -  total flux cleaned = 0.0146578 Jy
! Component: 200  -  total flux cleaned = 0.0170987 Jy
! Total flux subtracted in 200 components = 0.0170987 Jy
! Clean residual min=-0.001458 max=0.001421 Jy/beam
! Clean residual mean=-0.000004 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.167895 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 48 components and 0.167895 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.097 mas, bmaj=2.831 mas, bpa=-3.456 degrees
! Estimated noise=0.211384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00309944 Jy
! Component: 100  -  total flux cleaned = 0.00517915 Jy
! Component: 150  -  total flux cleaned = 0.00677598 Jy
! Component: 200  -  total flux cleaned = 0.0080504 Jy
! Total flux subtracted in 200 components = 0.0080504 Jy
! Clean residual min=-0.001269 max=0.001254 Jy/beam
! Clean residual mean=-0.000006 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.175946 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105092 Jy
! Component: 100  -  total flux cleaned = 0.0019367 Jy
! Component: 150  -  total flux cleaned = 0.0026962 Jy
! Component: 200  -  total flux cleaned = 0.00322916 Jy
! Total flux subtracted in 200 components = 0.00322916 Jy
! Clean residual min=-0.001071 max=0.001016 Jy/beam
! Clean residual mean=-0.000005 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.179175 Jy
! Adding 128 model components to the UV plane model.
! The established model now contains 171 components and 0.179175 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9915 mas, bmaj=1.79 mas, bpa=-2.525 degrees
! Estimated noise=0.173598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000688768 Jy
! Component: 100  -  total flux cleaned = 0.00110341 Jy
! Component: 150  -  total flux cleaned = 0.00140342 Jy
! Component: 200  -  total flux cleaned = 0.00167729 Jy
! Total flux subtracted in 200 components = 0.00167729 Jy
! Clean residual min=-0.001123 max=0.001066 Jy/beam
! Clean residual mean=-0.000002 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.180852 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 197 components and 0.180852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060067Jy  sigma=1.382598
! Fit after  self-cal, rms=0.060064Jy  sigma=1.382498
wmodel /J1041+2101_X_map.mod
! wmodel: Unable to open new model file: /J1041+2101_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1041+2101_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9915 x 1.79 at -2.525 degrees (North through East)
! Clean map  min=-0.0010537  max=0.12897 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1041+2101_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.128971 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000226294 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.526383 0.526383 1.05277 2.10553 4.21107 8.42213 16.8443 33.6885 67.3771
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.128 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  569.926 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1041+2101_X_dfm.log closed on Thu May 19 22:21:22 2016