! Started logfile: /scr/pima/bg219h_uvs/J1037+2834_X_dfm.log on Thu May 19 22:20:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1037+2834_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1037+2834_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.87619 visibilities/baseline/integration-bin.
! Found source: J1037+2834
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19872 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1037+2834_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016223Jy  sigma=25.248043
! Fit after  self-cal, rms=0.822342Jy  sigma=20.364158
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7548 mas, bmaj=1.39 mas, bpa=-2.267 degrees
! Estimated noise=0.39482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132826 Jy
! Component: 100  -  total flux cleaned = 0.170509 Jy
! Total flux subtracted in 100 components = 0.170509 Jy
! Clean residual min=-0.005562 max=0.015007 Jy/beam
! Clean residual mean=-0.000011 rms=0.001453 Jy/beam
! Combined flux in latest and established models = 0.170509 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.170509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067859Jy  sigma=1.586456
! Fit after  self-cal, rms=0.067593Jy  sigma=1.577402
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160879 Jy
! Component: 100  -  total flux cleaned = 0.023851 Jy
! Total flux subtracted in 100 components = 0.023851 Jy
! Clean residual min=-0.004003 max=0.006582 Jy/beam
! Clean residual mean=-0.000004 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.19436 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.19436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062885Jy  sigma=1.448739
! Fit after  self-cal, rms=0.062827Jy  sigma=1.446688
! Inverting map 
! Added new window around map position (2, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00639619 Jy
! Component: 100  -  total flux cleaned = 0.0105679 Jy
! Total flux subtracted in 100 components = 0.0105679 Jy
! Clean residual min=-0.003559 max=0.003904 Jy/beam
! Clean residual mean=-0.000002 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.204928 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.204928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061973Jy  sigma=1.423463
! Fit after  self-cal, rms=0.061946Jy  sigma=1.422722
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9644 mas, bmaj=1.746 mas, bpa=-2.385 degrees
! Estimated noise=0.212659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00474319 Jy
! Component: 100  -  total flux cleaned = 0.00753346 Jy
! Component: 150  -  total flux cleaned = 0.00947023 Jy
! Component: 200  -  total flux cleaned = 0.0109125 Jy
! Total flux subtracted in 200 components = 0.0109125 Jy
! Clean residual min=-0.002156 max=0.003276 Jy/beam
! Clean residual mean=-0.000003 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.21584 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.21584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061535Jy  sigma=1.412556
! Fit after  self-cal, rms=0.061510Jy  sigma=1.411759
! Inverting map 
! Added new window around map position (3.8, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293018 Jy
! Component: 100  -  total flux cleaned = 0.00460761 Jy
! Component: 150  -  total flux cleaned = 0.00587432 Jy
! Component: 200  -  total flux cleaned = 0.00658052 Jy
! Total flux subtracted in 200 components = 0.00658052 Jy
! Clean residual min=-0.001725 max=0.001650 Jy/beam
! Clean residual mean=-0.000001 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.222421 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 62 components and 0.222421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061341Jy  sigma=1.407748
! Fit after  self-cal, rms=0.061331Jy  sigma=1.407405
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9644 x 1.746 at -2.385 degrees (North through East)
! Clean map  min=-0.0015092  max=0.17527 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.97     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.03     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.98     KP        1.01     
!   LA        1.03     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.98     KP        1.00     
!   LA        1.02     MK        1.03     NL        1.03     OV        1.01     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.98     KP        1.01     
!   LA        1.00     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.97     KP        1.02     
!   LA        0.99     MK        1.03     NL        0.99     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.97     KP        1.02     
!   LA        1.03     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.00     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.02     OV        0.98     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.97     KP        1.01     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.95     KP        1.00     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.94     KP        1.00     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.061331Jy  sigma=1.407405
! Fit after  self-cal, rms=0.060834Jy  sigma=1.403037
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9686 mas, bmaj=1.749 mas, bpa=-2.269 degrees
! Estimated noise=0.21259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000553049 Jy
! Component: 100  -  total flux cleaned = 0.000682162 Jy
! Component: 150  -  total flux cleaned = 0.000824033 Jy
! Component: 200  -  total flux cleaned = 0.00095084 Jy
! Total flux subtracted in 200 components = 0.00095084 Jy
! Clean residual min=-0.001317 max=0.001446 Jy/beam
! Clean residual mean=0.000001 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.223372 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 0.223372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060800Jy  sigma=1.402291
! Fit after  self-cal, rms=0.060796Jy  sigma=1.402231
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060796Jy  sigma=1.402231
! Fit after  self-cal, rms=0.060696Jy  sigma=1.399719
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9665 mas, bmaj=1.748 mas, bpa=-2.553 degrees
! Estimated noise=0.212448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049574 Jy
! Component: 100  -  total flux cleaned = 0.000517256 Jy
! Component: 150  -  total flux cleaned = 0.000605757 Jy
! Component: 200  -  total flux cleaned = 0.000707181 Jy
! Total flux subtracted in 200 components = 0.000707181 Jy
! Clean residual min=-0.001197 max=0.001234 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.224079 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 96 components and 0.224079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060675Jy  sigma=1.399315
! Fit after  self-cal, rms=0.060676Jy  sigma=1.399276
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177384 Jy
! Component: 100  -  total flux cleaned = 0.000197023 Jy
! Component: 150  -  total flux cleaned = 0.000214116 Jy
! Component: 200  -  total flux cleaned = 0.000231229 Jy
! Total flux subtracted in 200 components = 0.000231229 Jy
! Clean residual min=-0.001183 max=0.001197 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.22431 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 105 components and 0.22431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060665Jy  sigma=1.399052
! Fit after  self-cal, rms=0.060664Jy  sigma=1.399037
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060664Jy  sigma=1.399037
! Fit after  self-cal, rms=0.060667Jy  sigma=1.398989
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9664 mas, bmaj=1.747 mas, bpa=-2.642 degrees
! Estimated noise=0.212481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275108 Jy
! Component: 100  -  total flux cleaned = 0.000294567 Jy
! Component: 150  -  total flux cleaned = 0.000294424 Jy
! Component: 200  -  total flux cleaned = 0.000279501 Jy
! Total flux subtracted in 200 components = 0.000279501 Jy
! Clean residual min=-0.001131 max=0.001142 Jy/beam
! Clean residual mean=0.000001 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.224589 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 110 components and 0.224589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060656Jy  sigma=1.398792
! Fit after  self-cal, rms=0.060655Jy  sigma=1.398776
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102129 Jy
! Component: 100  -  total flux cleaned = 0.000117259 Jy
! Component: 150  -  total flux cleaned = 0.000131415 Jy
! Component: 200  -  total flux cleaned = 0.000130947 Jy
! Total flux subtracted in 200 components = 0.000130947 Jy
! Clean residual min=-0.001128 max=0.001118 Jy/beam
! Clean residual mean=0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.22472 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 113 components and 0.22472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060648Jy  sigma=1.398629
! Fit after  self-cal, rms=0.060648Jy  sigma=1.398622
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060648Jy  sigma=1.398622
! Fit after  self-cal, rms=0.060648Jy  sigma=1.398600
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.058 mas, bmaj=2.73 mas, bpa=-0.3048 degrees
! Estimated noise=0.261278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201648 Jy
! Component: 100  -  total flux cleaned = 0.000216364 Jy
! Component: 150  -  total flux cleaned = 0.000205189 Jy
! Component: 200  -  total flux cleaned = 0.000184164 Jy
! Total flux subtracted in 200 components = 0.000184164 Jy
! Clean residual min=-0.001204 max=0.001179 Jy/beam
! Clean residual mean=0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.224905 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 128 components and 0.224905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060644Jy  sigma=1.398542
! Fit after  self-cal, rms=0.060644Jy  sigma=1.398527
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.25877e-05 Jy
! Component: 100  -  total flux cleaned = 1.26862e-05 Jy
! Component: 150  -  total flux cleaned = 3.47452e-06 Jy
! Component: 200  -  total flux cleaned = -1.41744e-05 Jy
! Total flux subtracted in 200 components = -1.41744e-05 Jy
! Clean residual min=-0.001195 max=0.001179 Jy/beam
! Clean residual mean=0.000003 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.22489 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 134 components and 0.22489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060640Jy  sigma=1.398489
! Fit after  self-cal, rms=0.060640Jy  sigma=1.398473
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9663 mas, bmaj=1.747 mas, bpa=-2.697 degrees
! Estimated noise=0.212513 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9663 x 1.747 at -2.697 degrees (North through East)
! Clean map  min=-0.0010343  max=0.17469 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7556 mas, bmaj=1.39 mas, bpa=-2.643 degrees
! Estimated noise=0.394716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132687 Jy
! Component: 100  -  total flux cleaned = 0.172704 Jy
! Component: 150  -  total flux cleaned = 0.189095 Jy
! Component: 200  -  total flux cleaned = 0.197042 Jy
! Total flux subtracted in 200 components = 0.197042 Jy
! Clean residual min=-0.003333 max=0.004117 Jy/beam
! Clean residual mean=-0.000004 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.197042 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.197042 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9663 mas, bmaj=1.747 mas, bpa=-2.697 degrees
! Estimated noise=0.212513 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00764444 Jy
! Component: 100  -  total flux cleaned = 0.0125226 Jy
! Component: 150  -  total flux cleaned = 0.0158952 Jy
! Component: 200  -  total flux cleaned = 0.0183821 Jy
! Total flux subtracted in 200 components = 0.0183821 Jy
! Clean residual min=-0.001600 max=0.001617 Jy/beam
! Clean residual mean=-0.000003 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.215424 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 52 components and 0.215424 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.058 mas, bmaj=2.73 mas, bpa=-0.3048 degrees
! Estimated noise=0.261278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325451 Jy
! Component: 100  -  total flux cleaned = 0.00526495 Jy
! Component: 150  -  total flux cleaned = 0.00660817 Jy
! Component: 200  -  total flux cleaned = 0.00753692 Jy
! Total flux subtracted in 200 components = 0.00753692 Jy
! Clean residual min=-0.001391 max=0.001185 Jy/beam
! Clean residual mean=0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.222961 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000658578 Jy
! Component: 100  -  total flux cleaned = 0.0011309 Jy
! Component: 150  -  total flux cleaned = 0.0014008 Jy
! Component: 200  -  total flux cleaned = 0.00152633 Jy
! Total flux subtracted in 200 components = 0.00152633 Jy
! Clean residual min=-0.001230 max=0.001115 Jy/beam
! Clean residual mean=0.000003 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.224487 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 124 components and 0.224487 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9663 mas, bmaj=1.747 mas, bpa=-2.697 degrees
! Estimated noise=0.212513 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.97859e-05 Jy
! Component: 100  -  total flux cleaned = 0.000281111 Jy
! Component: 150  -  total flux cleaned = 0.000483132 Jy
! Component: 200  -  total flux cleaned = 0.00061576 Jy
! Total flux subtracted in 200 components = 0.00061576 Jy
! Clean residual min=-0.001079 max=0.001219 Jy/beam
! Clean residual mean=0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.225103 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 138 components and 0.225103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060661Jy  sigma=1.399029
! Fit after  self-cal, rms=0.060654Jy  sigma=1.398836
wmodel /J1037+2834_X_map.mod
! wmodel: Unable to open new model file: /J1037+2834_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1037+2834_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9663 x 1.747 at -2.697 degrees (North through East)
! Clean map  min=-0.0010247  max=0.1746 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1037+2834_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.174596 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000286222 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.491802 0.491802 0.983604 1.96721 3.93441 7.86883 15.7377 31.4753 62.9506
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  610.001 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1037+2834_X_dfm.log closed on Thu May 19 22:20:59 2016