! Started logfile: /scr/pima/bg219h_uvs/J1036+2203_X_dfm.log on Thu May 19 22:20:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1036+2203_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1036+2203_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.867725 visibilities/baseline/integration-bin.
! Found source: J1036+2203
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19680 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1036+2203_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020281Jy  sigma=24.840746
! Fit after  self-cal, rms=0.763561Jy  sigma=18.481652
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7553 mas, bmaj=1.475 mas, bpa=-2.325 degrees
! Estimated noise=0.41464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172771 Jy
! Component: 100  -  total flux cleaned = 0.222208 Jy
! Total flux subtracted in 100 components = 0.222208 Jy
! Clean residual min=-0.007355 max=0.022532 Jy/beam
! Clean residual mean=-0.000017 rms=0.002064 Jy/beam
! Combined flux in latest and established models = 0.222208 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.222208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076945Jy  sigma=1.794066
! Fit after  self-cal, rms=0.076801Jy  sigma=1.790717
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254588 Jy
! Component: 100  -  total flux cleaned = 0.0388476 Jy
! Total flux subtracted in 100 components = 0.0388476 Jy
! Clean residual min=-0.004202 max=0.007817 Jy/beam
! Clean residual mean=-0.000009 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.261055 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.261055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064850Jy  sigma=1.485466
! Fit after  self-cal, rms=0.064783Jy  sigma=1.483856
! Inverting map 
! Added new window around map position (1, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0085741 Jy
! Component: 100  -  total flux cleaned = 0.013834 Jy
! Total flux subtracted in 100 components = 0.013834 Jy
! Clean residual min=-0.003824 max=0.004255 Jy/beam
! Clean residual mean=-0.000006 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.274889 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 17 components and 0.274889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063065Jy  sigma=1.441180
! Fit after  self-cal, rms=0.063003Jy  sigma=1.439711
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9808 mas, bmaj=1.841 mas, bpa=-1.262 degrees
! Estimated noise=0.219372 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00583511 Jy
! Component: 100  -  total flux cleaned = 0.00885728 Jy
! Component: 150  -  total flux cleaned = 0.0100558 Jy
! Component: 200  -  total flux cleaned = 0.0104942 Jy
! Total flux subtracted in 200 components = 0.0104942 Jy
! Clean residual min=-0.002780 max=0.003228 Jy/beam
! Clean residual mean=-0.000009 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.285384 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 0.285384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062433Jy  sigma=1.427340
! Fit after  self-cal, rms=0.062400Jy  sigma=1.426432
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9808 x 1.841 at -1.262 degrees (North through East)
! Clean map  min=-0.0027044  max=0.23679 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.92     KP        1.00     
!   LA        1.00     MK        1.05     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.95     KP        0.99     
!   LA        1.00     MK        1.06     NL        1.02     OV        1.03     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.05     NL        1.03     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.05     NL        1.02     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.95     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.02     OV        1.03     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.91     KP        0.99     
!   LA        1.00     MK        1.05     NL        1.02     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.04     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.95     KP        0.99     
!   LA        1.01     MK        1.05     NL        1.01     OV        1.01     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.93     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.95     KP        1.01     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.92     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.01     OV        1.02     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.93     KP        0.93     
!   LA        1.00     MK        1.04     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.062400Jy  sigma=1.426432
! Fit after  self-cal, rms=0.061116Jy  sigma=1.412747
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9875 mas, bmaj=1.845 mas, bpa=-0.9817 degrees
! Estimated noise=0.218952 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.6, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262604 Jy
! Component: 100  -  total flux cleaned = 0.00380995 Jy
! Component: 150  -  total flux cleaned = 0.00442478 Jy
! Component: 200  -  total flux cleaned = 0.0046943 Jy
! Total flux subtracted in 200 components = 0.0046943 Jy
! Clean residual min=-0.001543 max=0.001726 Jy/beam
! Clean residual mean=-0.000004 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.290078 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 48 components and 0.290078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060990Jy  sigma=1.409342
! Fit after  self-cal, rms=0.060967Jy  sigma=1.409076
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060967Jy  sigma=1.409076
! Fit after  self-cal, rms=0.060897Jy  sigma=1.404811
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9855 mas, bmaj=1.843 mas, bpa=-1.359 degrees
! Estimated noise=0.218826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105293 Jy
! Component: 100  -  total flux cleaned = 0.00124279 Jy
! Component: 150  -  total flux cleaned = 0.00136948 Jy
! Component: 200  -  total flux cleaned = 0.00145906 Jy
! Total flux subtracted in 200 components = 0.00145906 Jy
! Clean residual min=-0.001390 max=0.001234 Jy/beam
! Clean residual mean=-0.000004 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.291537 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 64 components and 0.291537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060869Jy  sigma=1.404149
! Fit after  self-cal, rms=0.060872Jy  sigma=1.404109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135725 Jy
! Component: 100  -  total flux cleaned = 0.000195259 Jy
! Component: 150  -  total flux cleaned = 0.000194689 Jy
! Component: 200  -  total flux cleaned = 0.000228796 Jy
! Total flux subtracted in 200 components = 0.000228796 Jy
! Clean residual min=-0.001367 max=0.001192 Jy/beam
! Clean residual mean=-0.000004 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.291766 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 72 components and 0.291766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060861Jy  sigma=1.403855
! Fit after  self-cal, rms=0.060859Jy  sigma=1.403840
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060859Jy  sigma=1.403840
! Fit after  self-cal, rms=0.060826Jy  sigma=1.403811
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9852 mas, bmaj=1.842 mas, bpa=-1.367 degrees
! Estimated noise=0.218691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.537e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103041 Jy
! Component: 150  -  total flux cleaned = 0.000102614 Jy
! Component: 200  -  total flux cleaned = 0.000118056 Jy
! Total flux subtracted in 200 components = 0.000118056 Jy
! Clean residual min=-0.001349 max=0.001173 Jy/beam
! Clean residual mean=-0.000004 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.291884 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.291884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060817Jy  sigma=1.403615
! Fit after  self-cal, rms=0.060817Jy  sigma=1.403604
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.09108e-05 Jy
! Component: 100  -  total flux cleaned = 2.63685e-05 Jy
! Component: 150  -  total flux cleaned = 3.94093e-05 Jy
! Component: 200  -  total flux cleaned = 5.22334e-05 Jy
! Total flux subtracted in 200 components = 5.22334e-05 Jy
! Clean residual min=-0.001332 max=0.001169 Jy/beam
! Clean residual mean=-0.000004 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.291936 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 0.291936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060810Jy  sigma=1.403468
! Fit after  self-cal, rms=0.060810Jy  sigma=1.403457
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060810Jy  sigma=1.403457
! Fit after  self-cal, rms=0.060794Jy  sigma=1.403450
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.115 mas, bmaj=2.905 mas, bpa=-2.011 degrees
! Estimated noise=0.267963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000262915 Jy
! Component: 100  -  total flux cleaned = 0.000183556 Jy
! Component: 150  -  total flux cleaned = 0.000144274 Jy
! Component: 200  -  total flux cleaned = 0.000164593 Jy
! Total flux subtracted in 200 components = 0.000164593 Jy
! Clean residual min=-0.001396 max=0.001384 Jy/beam
! Clean residual mean=-0.000007 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.292101 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 89 components and 0.292101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060792Jy  sigma=1.403397
! Fit after  self-cal, rms=0.060791Jy  sigma=1.403380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.12766e-05 Jy
! Component: 100  -  total flux cleaned = 7.6685e-07 Jy
! Component: 150  -  total flux cleaned = 1.6392e-05 Jy
! Component: 200  -  total flux cleaned = 3.77559e-05 Jy
! Total flux subtracted in 200 components = 3.77559e-05 Jy
! Clean residual min=-0.001394 max=0.001396 Jy/beam
! Clean residual mean=-0.000007 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.292138 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 95 components and 0.292138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060791Jy  sigma=1.403375
! Fit after  self-cal, rms=0.060791Jy  sigma=1.403362
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.985 mas, bmaj=1.842 mas, bpa=-1.392 degrees
! Estimated noise=0.218635 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.985 x 1.842 at -1.392 degrees (North through East)
! Clean map  min=-0.0012191  max=0.23604 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7582 mas, bmaj=1.475 mas, bpa=-2.539 degrees
! Estimated noise=0.413986 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172252 Jy
! Component: 100  -  total flux cleaned = 0.222241 Jy
! Component: 150  -  total flux cleaned = 0.247076 Jy
! Component: 200  -  total flux cleaned = 0.260477 Jy
! Total flux subtracted in 200 components = 0.260477 Jy
! Clean residual min=-0.003656 max=0.006889 Jy/beam
! Clean residual mean=-0.000007 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.260477 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.260477 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.985 mas, bmaj=1.842 mas, bpa=-1.392 degrees
! Estimated noise=0.218635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120529 Jy
! Component: 100  -  total flux cleaned = 0.0181388 Jy
! Component: 150  -  total flux cleaned = 0.0217924 Jy
! Component: 200  -  total flux cleaned = 0.0243107 Jy
! Total flux subtracted in 200 components = 0.0243107 Jy
! Clean residual min=-0.001773 max=0.001582 Jy/beam
! Clean residual mean=-0.000006 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.284787 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 23 components and 0.284787 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.115 mas, bmaj=2.905 mas, bpa=-2.011 degrees
! Estimated noise=0.267963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282388 Jy
! Component: 100  -  total flux cleaned = 0.00455427 Jy
! Component: 150  -  total flux cleaned = 0.00567843 Jy
! Component: 200  -  total flux cleaned = 0.00618994 Jy
! Total flux subtracted in 200 components = 0.00618994 Jy
! Clean residual min=-0.001460 max=0.001329 Jy/beam
! Clean residual mean=-0.000008 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.290977 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225081 Jy
! Component: 100  -  total flux cleaned = 0.000370662 Jy
! Component: 150  -  total flux cleaned = 0.000511329 Jy
! Component: 200  -  total flux cleaned = 0.000630341 Jy
! Total flux subtracted in 200 components = 0.000630341 Jy
! Clean residual min=-0.001420 max=0.001380 Jy/beam
! Clean residual mean=-0.000008 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.291608 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 71 components and 0.291608 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.985 mas, bmaj=1.842 mas, bpa=-1.392 degrees
! Estimated noise=0.218635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.12209e-05 Jy
! Component: 100  -  total flux cleaned = 8.03077e-05 Jy
! Component: 150  -  total flux cleaned = 0.000185384 Jy
! Component: 200  -  total flux cleaned = 0.000233216 Jy
! Total flux subtracted in 200 components = 0.000233216 Jy
! Clean residual min=-0.001318 max=0.001195 Jy/beam
! Clean residual mean=-0.000004 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.291841 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.291841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060820Jy  sigma=1.403891
! Fit after  self-cal, rms=0.060815Jy  sigma=1.403821
wmodel /J1036+2203_X_map.mod
! wmodel: Unable to open new model file: /J1036+2203_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1036+2203_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.985 x 1.842 at -1.392 degrees (North through East)
! Clean map  min=-0.0012254  max=0.23605 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1036+2203_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.236049 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000313165 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.398008 0.398008 0.796017 1.59203 3.18407 6.36813 12.7363 25.4725 50.9451
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.236 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  753.752 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1036+2203_X_dfm.log closed on Thu May 19 22:20:51 2016