! Started logfile: /scr/pima/bg219h_uvs/J1034-0211_X_uvs.log on Thu Apr 7 12:07:40 2016 obs /scr/pima/bg219h_uvs/J1034-0211_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J1034-0211_X_uva.fits ! AN table 1: 62 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.699373 visibilities/baseline/integration-bin. ! Found source: J1034-0211 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 18732 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1034-0211_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.001247Jy sigma=26.832132 ! Fit after self-cal, rms=0.965695Jy sigma=25.893785 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=3.453 mas, bpa=-16.81 degrees ! Estimated noise=0.407255 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275426 Jy ! Component: 100 - total flux cleaned = 0.0341218 Jy ! Total flux subtracted in 100 components = 0.0341218 Jy ! Clean residual min=-0.002732 max=0.003191 Jy/beam ! Clean residual mean=-0.000001 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.0341217 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0341217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.052700Jy sigma=1.354715 ! Fit after self-cal, rms=0.051019Jy sigma=1.309845 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478479 Jy ! Component: 100 - total flux cleaned = 0.00727441 Jy ! Total flux subtracted in 100 components = 0.00727441 Jy ! Clean residual min=-0.002887 max=0.002595 Jy/beam ! Clean residual mean=-0.000001 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0413962 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.0413962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050582Jy sigma=1.298549 ! Fit after self-cal, rms=0.050569Jy sigma=1.297711 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.182 mas, bmaj=3.661 mas, bpa=-16.13 degrees ! Estimated noise=0.269359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164423 Jy ! Component: 100 - total flux cleaned = 0.00210239 Jy ! Component: 150 - total flux cleaned = 0.0024292 Jy ! Component: 200 - total flux cleaned = 0.00269627 Jy ! Total flux subtracted in 200 components = 0.00269627 Jy ! Clean residual min=-0.002237 max=0.001956 Jy/beam ! Clean residual mean=0.000000 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0440924 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.0440924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050460Jy sigma=1.295152 ! Fit after self-cal, rms=0.050431Jy sigma=1.294423 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.182 x 3.661 at -16.13 degrees (North through East) ! Clean map min=-0.0023364 max=0.03767 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.89 KP 1.11 ! LA 0.88 MK 1.11 NL 1.11 OV 1.03 ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.92 KP 1.08 ! LA 0.91 MK 0.98 NL 0.99 OV 1.15 ! PT 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 0.87 KP 1.09 ! LA 1.00 MK 1.15 NL 1.10 OV 1.15 ! PT 0.94 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.89 KP 1.05 ! LA 1.02 MK 0.97 NL 0.99 OV 1.00 ! PT 0.93 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050431Jy sigma=1.294423 ! Fit after self-cal, rms=0.049918Jy sigma=1.291881 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.183 mas, bmaj=3.655 mas, bpa=-16.05 degrees ! Estimated noise=0.268937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000668097 Jy ! Component: 100 - total flux cleaned = 0.000739927 Jy ! Component: 150 - total flux cleaned = 0.000738671 Jy ! Component: 200 - total flux cleaned = 0.00075711 Jy ! Total flux subtracted in 200 components = 0.00075711 Jy ! Clean residual min=-0.001782 max=0.001674 Jy/beam ! Clean residual mean=-0.000000 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0448495 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.0448495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.049893Jy sigma=1.291295 ! Fit after self-cal, rms=0.049898Jy sigma=1.290417 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.049898Jy sigma=1.290417 ! Fit after self-cal, rms=0.050108Jy sigma=1.289139 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.179 mas, bmaj=3.657 mas, bpa=-16.11 degrees ! Estimated noise=0.269114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030979 Jy ! Component: 100 - total flux cleaned = 0.000354759 Jy ! Component: 150 - total flux cleaned = 0.000355459 Jy ! Component: 200 - total flux cleaned = 0.000372591 Jy ! Total flux subtracted in 200 components = 0.000372591 Jy ! Clean residual min=-0.001719 max=0.001588 Jy/beam ! Clean residual mean=-0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0452221 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.0452221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050089Jy sigma=1.288697 ! Fit after self-cal, rms=0.050091Jy sigma=1.288080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.09219e-05 Jy ! Component: 100 - total flux cleaned = 9.1659e-05 Jy ! Component: 150 - total flux cleaned = 9.18452e-05 Jy ! Component: 200 - total flux cleaned = 0.000105765 Jy ! Total flux subtracted in 200 components = 0.000105765 Jy ! Clean residual min=-0.001716 max=0.001555 Jy/beam ! Clean residual mean=-0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0453279 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.0453279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050081Jy sigma=1.287812 ! Fit after self-cal, rms=0.050073Jy sigma=1.287637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050073Jy sigma=1.287637 ! Fit after self-cal, rms=0.050194Jy sigma=1.287555 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.175 mas, bmaj=3.657 mas, bpa=-16.15 degrees ! Estimated noise=0.269267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011083 Jy ! Component: 100 - total flux cleaned = 0.000111397 Jy ! Component: 150 - total flux cleaned = 0.000124879 Jy ! Component: 200 - total flux cleaned = 0.000124788 Jy ! Total flux subtracted in 200 components = 0.000124788 Jy ! Clean residual min=-0.001670 max=0.001553 Jy/beam ! Clean residual mean=-0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0454527 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.0454527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050186Jy sigma=1.287359 ! Fit after self-cal, rms=0.050189Jy sigma=1.287199 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.89643e-05 Jy ! Component: 100 - total flux cleaned = -5.94384e-06 Jy ! Component: 150 - total flux cleaned = -6.33642e-06 Jy ! Component: 200 - total flux cleaned = -6.45232e-06 Jy ! Total flux subtracted in 200 components = -6.45232e-06 Jy ! Clean residual min=-0.001632 max=0.001566 Jy/beam ! Clean residual mean=-0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0454462 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0454462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050183Jy sigma=1.287066 ! Fit after self-cal, rms=0.050181Jy sigma=1.287040 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050181Jy sigma=1.287040 ! Fit after self-cal, rms=0.050246Jy sigma=1.287023 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=3.791 mas, bpa=-8.976 degrees ! Estimated noise=0.307814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.91188e-05 Jy ! Component: 100 - total flux cleaned = 2.03772e-05 Jy ! Component: 150 - total flux cleaned = 3.43097e-06 Jy ! Component: 200 - total flux cleaned = -2.05316e-05 Jy ! Total flux subtracted in 200 components = -2.05316e-05 Jy ! Clean residual min=-0.001667 max=0.001664 Jy/beam ! Clean residual mean=-0.000001 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0454257 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.0454257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050244Jy sigma=1.286988 ! Fit after self-cal, rms=0.050245Jy sigma=1.286969 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.94491e-05 Jy ! Component: 100 - total flux cleaned = -2.94987e-05 Jy ! Component: 150 - total flux cleaned = -4.47862e-05 Jy ! Component: 200 - total flux cleaned = -5.15383e-05 Jy ! Total flux subtracted in 200 components = -5.15383e-05 Jy ! Clean residual min=-0.001656 max=0.001671 Jy/beam ! Clean residual mean=-0.000001 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0453742 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.0453742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050244Jy sigma=1.286937 ! Fit after self-cal, rms=0.050243Jy sigma=1.286924 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.173 mas, bmaj=3.66 mas, bpa=-16.17 degrees ! Estimated noise=0.269459 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.173 x 3.66 at -16.17 degrees (North through East) ! Clean map min=-0.0018119 max=0.037582 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.012 mas, bmaj=3.455 mas, bpa=-16.9 degrees ! Estimated noise=0.404488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288317 Jy ! Component: 100 - total flux cleaned = 0.0374854 Jy ! Component: 150 - total flux cleaned = 0.0420315 Jy ! Component: 200 - total flux cleaned = 0.0436285 Jy ! Total flux subtracted in 200 components = 0.0436285 Jy ! Clean residual min=-0.002760 max=0.002740 Jy/beam ! Clean residual mean=-0.000002 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0436285 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0436285 Jy ! Inverting map and beam ! Estimated beam: bmin=1.173 mas, bmaj=3.66 mas, bpa=-16.17 degrees ! Estimated noise=0.269459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179393 Jy ! Component: 100 - total flux cleaned = 0.00213476 Jy ! Component: 150 - total flux cleaned = 0.00232484 Jy ! Component: 200 - total flux cleaned = 0.00251939 Jy ! Total flux subtracted in 200 components = 0.00251939 Jy ! Clean residual min=-0.001633 max=0.001581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0461479 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.0461479 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=3.791 mas, bpa=-8.976 degrees ! Estimated noise=0.307814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195188 Jy ! Component: 100 - total flux cleaned = 8.08705e-05 Jy ! Component: 150 - total flux cleaned = -1.05174e-08 Jy ! Component: 200 - total flux cleaned = -0.000109327 Jy ! Total flux subtracted in 200 components = -0.000109327 Jy ! Clean residual min=-0.001472 max=0.001685 Jy/beam ! Clean residual mean=-0.000000 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0460386 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.62998e-05 Jy ! Component: 100 - total flux cleaned = -0.000112383 Jy ! Component: 150 - total flux cleaned = -0.000183952 Jy ! Component: 200 - total flux cleaned = -0.000224004 Jy ! Total flux subtracted in 200 components = -0.000224004 Jy ! Clean residual min=-0.001410 max=0.001687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0458146 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 64 components and 0.0458146 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.173 mas, bmaj=3.66 mas, bpa=-16.17 degrees ! Estimated noise=0.269459 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000173876 Jy ! Component: 100 - total flux cleaned = -0.000111034 Jy ! Component: 150 - total flux cleaned = -0.000111186 Jy ! Component: 200 - total flux cleaned = -0.000111122 Jy ! Total flux subtracted in 200 components = -0.000111122 Jy ! Clean residual min=-0.001437 max=0.001433 Jy/beam ! Clean residual mean=-0.000000 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0457034 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.0457034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.050216Jy sigma=1.286244 ! Fit after self-cal, rms=0.050201Jy sigma=1.285983 wmodel /scr/pima/bg219h_uvs/J1034-0211_X_map.mod ! Writing 78 model components to file: /scr/pima/bg219h_uvs/J1034-0211_X_map.mod wobs /scr/pima/bg219h_uvs/J1034-0211_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219h_uvs/J1034-0211_X_uvs.fits wwins /scr/pima/bg219h_uvs/J1034-0211_X_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219h_uvs/J1034-0211_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193329 Jy ! Component: 100 - total flux cleaned = -0.000293595 Jy ! Component: 150 - total flux cleaned = -0.000363148 Jy ! Component: 200 - total flux cleaned = -0.000427875 Jy ! Component: 250 - total flux cleaned = -0.000509211 Jy ! Component: 300 - total flux cleaned = -0.000646608 Jy ! Component: 350 - total flux cleaned = -0.000721097 Jy ! Component: 400 - total flux cleaned = -0.000757182 Jy ! Component: 450 - total flux cleaned = -0.000774786 Jy ! Component: 500 - total flux cleaned = -0.000758254 Jy ! Component: 550 - total flux cleaned = -0.000774693 Jy ! Component: 600 - total flux cleaned = -0.000758777 Jy ! Component: 650 - total flux cleaned = -0.000728715 Jy ! Component: 700 - total flux cleaned = -0.000654539 Jy ! Component: 750 - total flux cleaned = -0.000596822 Jy ! Component: 800 - total flux cleaned = -0.000568693 Jy ! Component: 850 - total flux cleaned = -0.000513818 Jy ! Component: 900 - total flux cleaned = -0.000500747 Jy ! Component: 950 - total flux cleaned = -0.000461365 Jy ! Component: 1000 - total flux cleaned = -0.00043568 Jy ! Component: 1050 - total flux cleaned = -0.000397963 Jy ! Component: 1100 - total flux cleaned = -0.000336712 Jy ! Component: 1150 - total flux cleaned = -0.00031236 Jy ! Component: 1200 - total flux cleaned = -0.000253489 Jy ! Component: 1250 - total flux cleaned = -0.000219206 Jy ! Component: 1300 - total flux cleaned = -0.000151789 Jy ! Component: 1350 - total flux cleaned = -9.63858e-05 Jy ! Component: 1400 - total flux cleaned = -4.20491e-05 Jy ! Component: 1450 - total flux cleaned = -9.86414e-06 Jy ! Component: 1500 - total flux cleaned = 5.33216e-05 Jy ! Component: 1550 - total flux cleaned = 7.40317e-05 Jy ! Component: 1600 - total flux cleaned = 0.000114775 Jy ! Component: 1650 - total flux cleaned = 0.000114912 Jy ! Component: 1700 - total flux cleaned = 0.00013488 Jy ! Component: 1750 - total flux cleaned = 0.000164163 Jy ! Component: 1800 - total flux cleaned = 0.000221637 Jy ! Component: 1850 - total flux cleaned = 0.000278038 Jy ! Component: 1900 - total flux cleaned = 0.00026849 Jy ! Component: 1950 - total flux cleaned = 0.00029606 Jy ! Component: 2000 - total flux cleaned = 0.000332295 Jy ! Component: 2050 - total flux cleaned = 0.000376838 Jy ! Component: 2100 - total flux cleaned = 0.00039435 Jy ! Component: 2150 - total flux cleaned = 0.000420439 Jy ! Component: 2200 - total flux cleaned = 0.000429081 Jy ! Component: 2250 - total flux cleaned = 0.000471644 Jy ! Component: 2300 - total flux cleaned = 0.000505286 Jy ! Component: 2350 - total flux cleaned = 0.000513503 Jy ! Component: 2400 - total flux cleaned = 0.000538186 Jy ! Component: 2450 - total flux cleaned = 0.000538287 Jy ! Component: 2500 - total flux cleaned = 0.000562277 Jy ! Component: 2550 - total flux cleaned = 0.000586058 Jy ! Component: 2600 - total flux cleaned = 0.000609639 Jy ! Component: 2650 - total flux cleaned = 0.000601755 Jy ! Component: 2700 - total flux cleaned = 0.000647907 Jy ! Component: 2750 - total flux cleaned = 0.000663095 Jy ! Component: 2800 - total flux cleaned = 0.000693219 Jy ! Component: 2850 - total flux cleaned = 0.000685785 Jy ! Component: 2900 - total flux cleaned = 0.000730249 Jy ! Component: 2950 - total flux cleaned = 0.000744848 Jy ! Component: 3000 - total flux cleaned = 0.000766717 Jy ! Component: 3050 - total flux cleaned = 0.000788455 Jy ! Component: 3100 - total flux cleaned = 0.000795746 Jy ! Component: 3150 - total flux cleaned = 0.000831372 Jy ! Component: 3200 - total flux cleaned = 0.000824418 Jy ! Component: 3250 - total flux cleaned = 0.000852524 Jy ! Component: 3300 - total flux cleaned = 0.000866515 Jy ! Component: 3350 - total flux cleaned = 0.000894186 Jy ! Component: 3400 - total flux cleaned = 0.000887351 Jy ! Component: 3450 - total flux cleaned = 0.00090784 Jy ! Component: 3500 - total flux cleaned = 0.000934872 Jy ! Component: 3550 - total flux cleaned = 0.000934861 Jy ! Component: 3600 - total flux cleaned = 0.000954884 Jy ! Component: 3650 - total flux cleaned = 0.000934963 Jy ! Component: 3700 - total flux cleaned = 0.000941546 Jy ! Component: 3750 - total flux cleaned = 0.000961149 Jy ! Component: 3800 - total flux cleaned = 0.000954607 Jy ! Component: 3850 - total flux cleaned = 0.000941636 Jy ! Component: 3900 - total flux cleaned = 0.000941667 Jy ! Component: 3950 - total flux cleaned = 0.00093532 Jy ! Component: 4000 - total flux cleaned = 0.000929004 Jy ! Component: 4050 - total flux cleaned = 0.000941676 Jy ! Total flux subtracted in 4096 components = 0.000954212 Jy ! Clean residual min=-0.000403 max=0.000439 Jy/beam ! Clean residual mean=0.000000 rms=0.000111 Jy/beam ! Combined flux in latest and established models = 0.0466577 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 342 components and 0.0466577 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219h_uvs/J1034-0211_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.173 x 3.66 at -16.17 degrees (North through East) ! Clean map min=-0.0013318 max=0.037298 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1034-0211_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0372977 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000109064 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.87724 0.87724 1.75448 3.50896 7.01792 14.0358 28.0717 56.1433 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.037 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 341.981 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J1034-0211_X_uvs.log closed on Thu Apr 7 12:07:44 2016