! Started logfile: /scr/pima/bg219h_uvs/J1034-0211_X_dfm.log on Thu May 19 22:20:41 2016 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /scr/pima/bg219h_uvs/J1034-0211_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J1034-0211_X_uva.fits ! AN table 1: 62 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.699373 visibilities/baseline/integration-bin. ! Found source: J1034-0211 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 18732 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1034-0211_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002635Jy sigma=25.712236 ! Fit after self-cal, rms=0.965307Jy sigma=24.773689 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9679 mas, bmaj=3.525 mas, bpa=-16.65 degrees ! Estimated noise=0.341575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277864 Jy ! Component: 100 - total flux cleaned = 0.0342969 Jy ! Total flux subtracted in 100 components = 0.0342969 Jy ! Clean residual min=-0.002553 max=0.002936 Jy/beam ! Clean residual mean=0.000001 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0342969 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0342969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055684Jy sigma=1.348578 ! Fit after self-cal, rms=0.053917Jy sigma=1.303878 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492565 Jy ! Component: 100 - total flux cleaned = 0.00656758 Jy ! Total flux subtracted in 100 components = 0.00656758 Jy ! Clean residual min=-0.002452 max=0.002311 Jy/beam ! Clean residual mean=0.000000 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0408645 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 30 components and 0.0408645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053471Jy sigma=1.293005 ! Fit after self-cal, rms=0.053445Jy sigma=1.292282 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.173 mas, bmaj=3.635 mas, bpa=-16.11 degrees ! Estimated noise=0.215647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214809 Jy ! Component: 100 - total flux cleaned = 0.00290531 Jy ! Component: 150 - total flux cleaned = 0.00320023 Jy ! Component: 200 - total flux cleaned = 0.00342685 Jy ! Total flux subtracted in 200 components = 0.00342685 Jy ! Clean residual min=-0.001929 max=0.001729 Jy/beam ! Clean residual mean=0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0442913 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 0.0442913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053342Jy sigma=1.289916 ! Fit after self-cal, rms=0.053315Jy sigma=1.289112 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.173 x 3.635 at -16.11 degrees (North through East) ! Clean map min=-0.001933 max=0.038522 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.91 KP 1.11 ! LA 0.88 MK 1.19 NL 1.10 OV 1.03 ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.94 KP 1.09 ! LA 0.91 MK 1.04 NL 1.00 OV 1.16 ! PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.94 KP 1.04 ! LA 0.91 MK 1.06 NL 1.00 OV 1.12 ! PT 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.91 KP 1.05 ! LA 1.03 MK 1.02 NL 0.98 OV 1.01 ! PT 0.92 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Fit before self-cal, rms=0.053315Jy sigma=1.289112 ! Fit after self-cal, rms=0.053173Jy sigma=1.287954 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.176 mas, bmaj=3.634 mas, bpa=-16.05 degrees ! Estimated noise=0.215858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767302 Jy ! Component: 100 - total flux cleaned = 0.000835858 Jy ! Component: 150 - total flux cleaned = 0.000852618 Jy ! Component: 200 - total flux cleaned = 0.000885419 Jy ! Total flux subtracted in 200 components = 0.000885419 Jy ! Clean residual min=-0.001751 max=0.001490 Jy/beam ! Clean residual mean=-0.000000 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0451768 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.0451768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053151Jy sigma=1.287473 ! Fit after self-cal, rms=0.053154Jy sigma=1.287114 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053154Jy sigma=1.287114 ! Fit after self-cal, rms=0.053410Jy sigma=1.285579 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.175 mas, bmaj=3.634 mas, bpa=-16.11 degrees ! Estimated noise=0.217092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043947 Jy ! Component: 100 - total flux cleaned = 0.000530469 Jy ! Component: 150 - total flux cleaned = 0.000544632 Jy ! Component: 200 - total flux cleaned = 0.000570938 Jy ! Total flux subtracted in 200 components = 0.000570938 Jy ! Clean residual min=-0.001509 max=0.001402 Jy/beam ! Clean residual mean=-0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0457477 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.0457477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053397Jy sigma=1.285295 ! Fit after self-cal, rms=0.053401Jy sigma=1.284748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.63655e-05 Jy ! Component: 100 - total flux cleaned = 8.3483e-05 Jy ! Component: 150 - total flux cleaned = 0.000107301 Jy ! Component: 200 - total flux cleaned = 0.000118623 Jy ! Total flux subtracted in 200 components = 0.000118623 Jy ! Clean residual min=-0.001516 max=0.001403 Jy/beam ! Clean residual mean=-0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0458663 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.0458663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053394Jy sigma=1.284578 ! Fit after self-cal, rms=0.053388Jy sigma=1.284478 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053388Jy sigma=1.284478 ! Fit after self-cal, rms=0.053390Jy sigma=1.284212 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.172 mas, bmaj=3.626 mas, bpa=-16.14 degrees ! Estimated noise=0.217292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263941 Jy ! Component: 100 - total flux cleaned = 0.00030371 Jy ! Component: 150 - total flux cleaned = 0.000326561 Jy ! Component: 200 - total flux cleaned = 0.000357866 Jy ! Total flux subtracted in 200 components = 0.000357866 Jy ! Clean residual min=-0.001460 max=0.001365 Jy/beam ! Clean residual mean=-0.000001 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0462242 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.0462242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053383Jy sigma=1.284077 ! Fit after self-cal, rms=0.053382Jy sigma=1.283889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.3453e-06 Jy ! Component: 100 - total flux cleaned = 7.65994e-06 Jy ! Component: 150 - total flux cleaned = 1.83947e-05 Jy ! Component: 200 - total flux cleaned = 1.82492e-05 Jy ! Total flux subtracted in 200 components = 1.82492e-05 Jy ! Clean residual min=-0.001462 max=0.001408 Jy/beam ! Clean residual mean=-0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0462424 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.0462424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053376Jy sigma=1.283760 ! Fit after self-cal, rms=0.053368Jy sigma=1.283685 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053368Jy sigma=1.283685 ! Fit after self-cal, rms=0.053572Jy sigma=1.283106 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=3.771 mas, bpa=-8.804 degrees ! Estimated noise=0.248449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035438 Jy ! Component: 100 - total flux cleaned = 0.000353975 Jy ! Component: 150 - total flux cleaned = 0.000363623 Jy ! Component: 200 - total flux cleaned = 0.000371948 Jy ! Total flux subtracted in 200 components = 0.000371948 Jy ! Clean residual min=-0.001357 max=0.001576 Jy/beam ! Clean residual mean=-0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0466144 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 78 components and 0.0466144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053568Jy sigma=1.283027 ! Fit after self-cal, rms=0.053575Jy sigma=1.282920 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.14058e-05 Jy ! Component: 100 - total flux cleaned = 3.00684e-06 Jy ! Component: 150 - total flux cleaned = -5.60513e-06 Jy ! Component: 200 - total flux cleaned = -5.50366e-06 Jy ! Total flux subtracted in 200 components = -5.50366e-06 Jy ! Clean residual min=-0.001361 max=0.001569 Jy/beam ! Clean residual mean=-0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0466089 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.0466089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053573Jy sigma=1.282862 ! Fit after self-cal, rms=0.053573Jy sigma=1.282848 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.172 mas, bmaj=3.624 mas, bpa=-16.13 degrees ! Estimated noise=0.218425 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.172 x 3.624 at -16.13 degrees (North through East) ! Clean map min=-0.0013224 max=0.038927 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9676 mas, bmaj=3.522 mas, bpa=-16.58 degrees ! Estimated noise=0.345752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300064 Jy ! Component: 100 - total flux cleaned = 0.0389757 Jy ! Component: 150 - total flux cleaned = 0.0429945 Jy ! Component: 200 - total flux cleaned = 0.0454257 Jy ! Total flux subtracted in 200 components = 0.0454257 Jy ! Clean residual min=-0.002174 max=0.002319 Jy/beam ! Clean residual mean=-0.000001 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0454257 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0454257 Jy ! Inverting map and beam ! Estimated beam: bmin=1.172 mas, bmaj=3.624 mas, bpa=-16.13 degrees ! Estimated noise=0.218425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808251 Jy ! Component: 100 - total flux cleaned = 0.000948638 Jy ! Component: 150 - total flux cleaned = 0.000913342 Jy ! Component: 200 - total flux cleaned = 0.000885997 Jy ! Total flux subtracted in 200 components = 0.000885997 Jy ! Clean residual min=-0.001533 max=0.001357 Jy/beam ! Clean residual mean=-0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0463117 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.0463117 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=3.771 mas, bpa=-8.804 degrees ! Estimated noise=0.248449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001601 Jy ! Component: 100 - total flux cleaned = 0.000207597 Jy ! Component: 150 - total flux cleaned = 0.000194811 Jy ! Component: 200 - total flux cleaned = 0.000170344 Jy ! Total flux subtracted in 200 components = 0.000170344 Jy ! Clean residual min=-0.001307 max=0.001583 Jy/beam ! Clean residual mean=-0.000001 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.046482 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.24624e-05 Jy ! Component: 100 - total flux cleaned = -4.40174e-05 Jy ! Component: 150 - total flux cleaned = -6.44868e-05 Jy ! Component: 200 - total flux cleaned = -7.42915e-05 Jy ! Total flux subtracted in 200 components = -7.42915e-05 Jy ! Clean residual min=-0.001313 max=0.001572 Jy/beam ! Clean residual mean=-0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0464078 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.0464078 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.172 mas, bmaj=3.624 mas, bpa=-16.13 degrees ! Estimated noise=0.218425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128837 Jy ! Component: 100 - total flux cleaned = -0.000130199 Jy ! Component: 150 - total flux cleaned = -0.00014636 Jy ! Component: 200 - total flux cleaned = -0.000131669 Jy ! Total flux subtracted in 200 components = -0.000131669 Jy ! Clean residual min=-0.001421 max=0.001310 Jy/beam ! Clean residual mean=-0.000001 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0462761 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.0462761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053580Jy sigma=1.283043 ! Fit after self-cal, rms=0.053582Jy sigma=1.282943 wmodel /J1034-0211_X_map.mod ! wmodel: Unable to open new model file: /J1034-0211_X_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J1034-0211_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.172 x 3.624 at -16.13 degrees (North through East) ! Clean map min=-0.0013452 max=0.038571 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1034-0211_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0385713 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000348709 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.71219 2.71219 5.42438 10.8488 21.6975 43.395 86.7901 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.038 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 110.611 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J1034-0211_X_dfm.log closed on Thu May 19 22:20:43 2016