! Started logfile: /scr/pima/bg219h_uvs/J1031+7441_X_dfm.log on Thu May 19 22:20:25 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1031+7441_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1031+7441_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.899145 visibilities/baseline/integration-bin.
! Found source: J1031+7441
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25248 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1031+7441_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009417Jy  sigma=22.420199
! Fit after  self-cal, rms=0.900566Jy  sigma=19.961198
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.639 mas, bmaj=1.597 mas, bpa=-86.15 degrees
! Estimated noise=0.521125 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0728871 Jy
! Component: 100  -  total flux cleaned = 0.0952299 Jy
! Total flux subtracted in 100 components = 0.0952299 Jy
! Clean residual min=-0.004417 max=0.009519 Jy/beam
! Clean residual mean=0.000009 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.0952299 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0952299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073030Jy  sigma=1.459010
! Fit after  self-cal, rms=0.072734Jy  sigma=1.453135
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108084 Jy
! Component: 100  -  total flux cleaned = 0.0158164 Jy
! Total flux subtracted in 100 components = 0.0158164 Jy
! Clean residual min=-0.003270 max=0.003776 Jy/beam
! Clean residual mean=0.000005 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.111046 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.111046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070868Jy  sigma=1.403235
! Fit after  self-cal, rms=0.070849Jy  sigma=1.402854
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8502 mas, bmaj=2.031 mas, bpa=-89.2 degrees
! Estimated noise=0.216096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00424586 Jy
! Component: 100  -  total flux cleaned = 0.0061421 Jy
! Component: 150  -  total flux cleaned = 0.00730858 Jy
! Component: 200  -  total flux cleaned = 0.00784056 Jy
! Total flux subtracted in 200 components = 0.00784056 Jy
! Clean residual min=-0.001677 max=0.001744 Jy/beam
! Clean residual mean=0.000001 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.118887 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.118887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070633Jy  sigma=1.396842
! Fit after  self-cal, rms=0.070621Jy  sigma=1.396561
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8502 x 2.031 at -89.2 degrees (North through East)
! Clean map  min=-0.0015147  max=0.10059 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.02     KP        1.00     
!   LA        0.99     MK        1.07     NL        1.01     OV        1.01     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.01     KP        0.98     
!   LA        1.01     MK        1.02     NL        0.95     OV        1.01     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        0.98     
!   LA        0.99     MK        1.07     NL        1.00     OV        1.02     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.01     KP        1.02     
!   LA        1.00     MK        1.03     NL        1.02     OV        0.98     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.00     KP        0.99     
!   LA        1.03     MK        1.06     NL        1.02     OV        0.99     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.97     KP        1.03     
!   LA        1.02     MK        1.01     NL        1.00     OV        1.00     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.98     KP        0.98     
!   LA        1.00     MK        0.97     NL        0.98     OV        1.03     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.98     KP        0.95     
!   LA        1.00     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        0.95     KP        1.03     
!   LA        0.96     MK        1.04     NL        0.99     OV        1.04     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.92     KP        0.98     
!   LA        0.96     MK        0.97     NL        0.98     OV        1.01     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        0.98     KP        0.99     
!   LA        0.96     MK        1.02     NL        1.00     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.90     KP        1.04     
!   LA        0.96     MK        1.01     NL        0.98     OV        0.96     
!   PT        0.97     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.070621Jy  sigma=1.396561
! Fit after  self-cal, rms=0.070109Jy  sigma=1.393684
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8557 mas, bmaj=2.036 mas, bpa=-89.35 degrees
! Estimated noise=0.215654 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000254098 Jy
! Component: 100  -  total flux cleaned = 0.00023443 Jy
! Component: 150  -  total flux cleaned = 0.000251122 Jy
! Component: 200  -  total flux cleaned = 0.000299897 Jy
! Total flux subtracted in 200 components = 0.000299897 Jy
! Clean residual min=-0.001578 max=0.001506 Jy/beam
! Clean residual mean=-0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.119187 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 48 components and 0.119187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070095Jy  sigma=1.393323
! Fit after  self-cal, rms=0.070098Jy  sigma=1.393205
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070098Jy  sigma=1.393205
! Fit after  self-cal, rms=0.070239Jy  sigma=1.390418
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8555 mas, bmaj=2.043 mas, bpa=-89.03 degrees
! Estimated noise=0.215462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218354 Jy
! Component: 100  -  total flux cleaned = 0.000145462 Jy
! Component: 150  -  total flux cleaned = 0.000131233 Jy
! Component: 200  -  total flux cleaned = 0.000107355 Jy
! Total flux subtracted in 200 components = 0.000107355 Jy
! Clean residual min=-0.001351 max=0.001396 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.119294 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 66 components and 0.119294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070227Jy  sigma=1.390220
! Fit after  self-cal, rms=0.070233Jy  sigma=1.390111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.6, -32.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115686 Jy
! Component: 100  -  total flux cleaned = 0.00141945 Jy
! Component: 150  -  total flux cleaned = 0.00143829 Jy
! Component: 200  -  total flux cleaned = 0.00142296 Jy
! Total flux subtracted in 200 components = 0.00142296 Jy
! Clean residual min=-0.001285 max=0.001261 Jy/beam
! Clean residual mean=0.000000 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.120717 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 85 components and 0.120717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070211Jy  sigma=1.389645
! Fit after  self-cal, rms=0.070209Jy  sigma=1.389591
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070209Jy  sigma=1.389591
! Fit after  self-cal, rms=0.070262Jy  sigma=1.389537
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8551 mas, bmaj=2.045 mas, bpa=-88.97 degrees
! Estimated noise=0.215409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000345932 Jy
! Component: 100  -  total flux cleaned = 0.000362059 Jy
! Component: 150  -  total flux cleaned = 0.000347767 Jy
! Component: 200  -  total flux cleaned = 0.000321477 Jy
! Total flux subtracted in 200 components = 0.000321477 Jy
! Clean residual min=-0.001251 max=0.001234 Jy/beam
! Clean residual mean=-0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.121039 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 94 components and 0.121039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070254Jy  sigma=1.389395
! Fit after  self-cal, rms=0.070255Jy  sigma=1.389385
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109851 Jy
! Component: 100  -  total flux cleaned = 9.73665e-05 Jy
! Component: 150  -  total flux cleaned = 7.36169e-05 Jy
! Component: 200  -  total flux cleaned = 3.96945e-05 Jy
! Total flux subtracted in 200 components = 3.96945e-05 Jy
! Clean residual min=-0.001244 max=0.001250 Jy/beam
! Clean residual mean=-0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.121078 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 104 components and 0.121078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070251Jy  sigma=1.389301
! Fit after  self-cal, rms=0.070251Jy  sigma=1.389297
! Inverting map 
! Added new window around map position (-19.8, 19.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109887 Jy
! Component: 100  -  total flux cleaned = 0.00120225 Jy
! Component: 150  -  total flux cleaned = 0.00120346 Jy
! Component: 200  -  total flux cleaned = 0.00120323 Jy
! Total flux subtracted in 200 components = 0.00120323 Jy
! Clean residual min=-0.001186 max=0.001109 Jy/beam
! Clean residual mean=0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.122282 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 115 components and 0.122282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070229Jy  sigma=1.388883
! Fit after  self-cal, rms=0.070229Jy  sigma=1.388851
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070229Jy  sigma=1.388851
! Fit after  self-cal, rms=0.070258Jy  sigma=1.388814
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.179 mas, bmaj=3.372 mas, bpa=84.95 degrees
! Estimated noise=0.268439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.5551e-05 Jy
! Component: 100  -  total flux cleaned = 1.27458e-05 Jy
! Component: 150  -  total flux cleaned = 7.30951e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104097 Jy
! Total flux subtracted in 200 components = 0.000104097 Jy
! Clean residual min=-0.001244 max=0.001137 Jy/beam
! Clean residual mean=0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.122386 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 128 components and 0.122386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070254Jy  sigma=1.388757
! Fit after  self-cal, rms=0.070254Jy  sigma=1.388740
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.6799e-05 Jy
! Component: 100  -  total flux cleaned = 0.000138103 Jy
! Component: 150  -  total flux cleaned = 0.00017369 Jy
! Component: 200  -  total flux cleaned = 0.000205708 Jy
! Total flux subtracted in 200 components = 0.000205708 Jy
! Clean residual min=-0.001222 max=0.001145 Jy/beam
! Clean residual mean=0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.122591 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.122591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070254Jy  sigma=1.388728
! Fit after  self-cal, rms=0.070253Jy  sigma=1.388719
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8552 mas, bmaj=2.047 mas, bpa=-88.91 degrees
! Estimated noise=0.215189 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8552 x 2.047 at -88.91 degrees (North through East)
! Clean map  min=-0.0010421  max=0.099834 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6426 mas, bmaj=1.611 mas, bpa=-85.8 degrees
! Estimated noise=0.520972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0730918 Jy
! Component: 100  -  total flux cleaned = 0.0963034 Jy
! Component: 150  -  total flux cleaned = 0.106609 Jy
! Component: 200  -  total flux cleaned = 0.111715 Jy
! Total flux subtracted in 200 components = 0.111715 Jy
! Clean residual min=-0.002891 max=0.003227 Jy/beam
! Clean residual mean=0.000004 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.111715 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.111715 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8552 mas, bmaj=2.047 mas, bpa=-88.91 degrees
! Estimated noise=0.215189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004084 Jy
! Component: 100  -  total flux cleaned = 0.00618539 Jy
! Component: 150  -  total flux cleaned = 0.00759812 Jy
! Component: 200  -  total flux cleaned = 0.00865826 Jy
! Total flux subtracted in 200 components = 0.00865826 Jy
! Clean residual min=-0.001252 max=0.001247 Jy/beam
! Clean residual mean=0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.120373 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 33 components and 0.120373 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.179 mas, bmaj=3.372 mas, bpa=84.95 degrees
! Estimated noise=0.268439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000970665 Jy
! Component: 100  -  total flux cleaned = 0.00145805 Jy
! Component: 150  -  total flux cleaned = 0.00168485 Jy
! Component: 200  -  total flux cleaned = 0.00179238 Jy
! Total flux subtracted in 200 components = 0.00179238 Jy
! Clean residual min=-0.001292 max=0.001180 Jy/beam
! Clean residual mean=0.000001 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.122165 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.68354e-05 Jy
! Component: 100  -  total flux cleaned = 0.000184288 Jy
! Component: 150  -  total flux cleaned = 0.000250863 Jy
! Component: 200  -  total flux cleaned = 0.000300646 Jy
! Total flux subtracted in 200 components = 0.000300646 Jy
! Clean residual min=-0.001250 max=0.001159 Jy/beam
! Clean residual mean=0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.122466 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 74 components and 0.122466 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8552 mas, bmaj=2.047 mas, bpa=-88.91 degrees
! Estimated noise=0.215189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.90594e-05 Jy
! Component: 100  -  total flux cleaned = 2.43891e-05 Jy
! Component: 150  -  total flux cleaned = 8.88272e-05 Jy
! Component: 200  -  total flux cleaned = 0.00014605 Jy
! Total flux subtracted in 200 components = 0.00014605 Jy
! Clean residual min=-0.001220 max=0.001085 Jy/beam
! Clean residual mean=0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.122612 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 86 components and 0.122612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070267Jy  sigma=1.389029
! Fit after  self-cal, rms=0.070264Jy  sigma=1.388988
wmodel /J1031+7441_X_map.mod
! wmodel: Unable to open new model file: /J1031+7441_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1031+7441_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8552 x 2.047 at -88.91 degrees (North through East)
! Clean map  min=-0.0010984  max=0.099612 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1031+7441_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0996117 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270706 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.815285 0.815285 1.63057 3.26114 6.52228 13.0446 26.0891 52.1782
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.099 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  367.969 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1031+7441_X_dfm.log closed on Thu May 19 22:20:28 2016