! Started logfile: /scr/pima/bg219h_uvs/J1028+2401_X_dfm.log on Thu May 19 22:20:15 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1028+2401_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1028+2401_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.875214 visibilities/baseline/integration-bin.
! Found source: J1028+2401
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24576 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1028+2401_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012429Jy  sigma=25.339073
! Fit after  self-cal, rms=0.876533Jy  sigma=21.923863
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.754 mas, bmaj=1.42 mas, bpa=-3.734 degrees
! Estimated noise=0.37292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0914179 Jy
! Component: 100  -  total flux cleaned = 0.119756 Jy
! Total flux subtracted in 100 components = 0.119756 Jy
! Clean residual min=-0.005078 max=0.015092 Jy/beam
! Clean residual mean=-0.000010 rms=0.001397 Jy/beam
! Combined flux in latest and established models = 0.119756 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.119756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065630Jy  sigma=1.560674
! Fit after  self-cal, rms=0.065377Jy  sigma=1.555470
! Inverting map 
! Added new window around map position (0.2, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165212 Jy
! Component: 100  -  total flux cleaned = 0.0253538 Jy
! Total flux subtracted in 100 components = 0.0253538 Jy
! Clean residual min=-0.003426 max=0.005162 Jy/beam
! Clean residual mean=-0.000006 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.14511 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.14511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060698Jy  sigma=1.426638
! Fit after  self-cal, rms=0.060565Jy  sigma=1.423594
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00622737 Jy
! Component: 100  -  total flux cleaned = 0.00975817 Jy
! Total flux subtracted in 100 components = 0.00975817 Jy
! Clean residual min=-0.003010 max=0.003313 Jy/beam
! Clean residual mean=-0.000004 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.154868 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.154868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059925Jy  sigma=1.405800
! Fit after  self-cal, rms=0.059884Jy  sigma=1.404868
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.975 mas, bmaj=1.797 mas, bpa=-4.467 degrees
! Estimated noise=0.192646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308482 Jy
! Component: 100  -  total flux cleaned = 0.00474819 Jy
! Component: 150  -  total flux cleaned = 0.00579171 Jy
! Component: 200  -  total flux cleaned = 0.00630507 Jy
! Total flux subtracted in 200 components = 0.00630507 Jy
! Clean residual min=-0.002099 max=0.001908 Jy/beam
! Clean residual mean=-0.000004 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.161173 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.161173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059725Jy  sigma=1.400598
! Fit after  self-cal, rms=0.059712Jy  sigma=1.400226
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.975 x 1.797 at -4.467 degrees (North through East)
! Clean map  min=-0.0019651  max=0.12031 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.96     KP        1.01     
!   LA        1.02     MK        1.01     NL        1.01     OV        1.02     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.93     KP        1.02     
!   LA        0.97     MK        1.02     NL        1.04     OV        1.03     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.94     KP        1.03     
!   LA        1.01     MK        0.99     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.97     KP        1.02     
!   LA        0.99     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.97     KP        1.02     
!   LA        1.00     MK        1.05     NL        1.03     OV        0.96     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        0.99     
!   LA        1.02     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.93     KP        1.00     
!   LA        1.03     MK        1.04     NL        1.02     OV        1.03     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.96     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.01     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.95     KP        1.04     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.95     KP        1.03     
!   LA        1.01     MK        1.00     NL        1.02     OV        1.01     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.95     KP        1.01     
!   LA        1.00     MK        0.98     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.93     KP        1.02     
!   LA        1.02     MK        1.01     NL        1.04     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.059712Jy  sigma=1.400226
! Fit after  self-cal, rms=0.059050Jy  sigma=1.395460
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9765 mas, bmaj=1.798 mas, bpa=-4.583 degrees
! Estimated noise=0.192175 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000535163 Jy
! Component: 100  -  total flux cleaned = 0.000558152 Jy
! Component: 150  -  total flux cleaned = 0.000577795 Jy
! Component: 200  -  total flux cleaned = 0.000639556 Jy
! Total flux subtracted in 200 components = 0.000639556 Jy
! Clean residual min=-0.001488 max=0.001566 Jy/beam
! Clean residual mean=-0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.161813 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 37 components and 0.161813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059030Jy  sigma=1.394983
! Fit after  self-cal, rms=0.059014Jy  sigma=1.394783
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059014Jy  sigma=1.394783
! Fit after  self-cal, rms=0.059010Jy  sigma=1.392024
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9767 mas, bmaj=1.795 mas, bpa=-4.496 degrees
! Estimated noise=0.192113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000278446 Jy
! Component: 100  -  total flux cleaned = 0.000297586 Jy
! Component: 150  -  total flux cleaned = 0.000362936 Jy
! Component: 200  -  total flux cleaned = 0.000403767 Jy
! Total flux subtracted in 200 components = 0.000403767 Jy
! Clean residual min=-0.001336 max=0.001464 Jy/beam
! Clean residual mean=-0.000001 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.162217 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.162217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058997Jy  sigma=1.391724
! Fit after  self-cal, rms=0.058996Jy  sigma=1.391589
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-21.2, 34.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117742 Jy
! Component: 100  -  total flux cleaned = 0.00161654 Jy
! Component: 150  -  total flux cleaned = 0.00182939 Jy
! Component: 200  -  total flux cleaned = 0.00200788 Jy
! Total flux subtracted in 200 components = 0.00200788 Jy
! Clean residual min=-0.001390 max=0.001263 Jy/beam
! Clean residual mean=-0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.164225 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 57 components and 0.164225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058963Jy  sigma=1.390766
! Fit after  self-cal, rms=0.058959Jy  sigma=1.390693
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058959Jy  sigma=1.390693
! Fit after  self-cal, rms=0.058935Jy  sigma=1.390631
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9764 mas, bmaj=1.794 mas, bpa=-4.463 degrees
! Estimated noise=0.192121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394535 Jy
! Component: 100  -  total flux cleaned = 0.00057556 Jy
! Component: 150  -  total flux cleaned = 0.000661185 Jy
! Component: 200  -  total flux cleaned = 0.000738237 Jy
! Total flux subtracted in 200 components = 0.000738237 Jy
! Clean residual min=-0.001290 max=0.001274 Jy/beam
! Clean residual mean=-0.000001 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.164963 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 60 components and 0.164963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058923Jy  sigma=1.390340
! Fit after  self-cal, rms=0.058921Jy  sigma=1.390295
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-46.6, 39.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105826 Jy
! Component: 100  -  total flux cleaned = 0.001063 Jy
! Component: 150  -  total flux cleaned = 0.00111904 Jy
! Component: 200  -  total flux cleaned = 0.00120117 Jy
! Total flux subtracted in 200 components = 0.00120117 Jy
! Clean residual min=-0.001260 max=0.001211 Jy/beam
! Clean residual mean=-0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.166164 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 75 components and 0.166164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058899Jy  sigma=1.389688
! Fit after  self-cal, rms=0.058896Jy  sigma=1.389638
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058896Jy  sigma=1.389638
! Fit after  self-cal, rms=0.058901Jy  sigma=1.389603
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.111 mas, bmaj=2.847 mas, bpa=-2.786 degrees
! Estimated noise=0.234792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000517481 Jy
! Component: 100  -  total flux cleaned = 0.000681487 Jy
! Component: 150  -  total flux cleaned = 0.000771375 Jy
! Component: 200  -  total flux cleaned = 0.000882372 Jy
! Total flux subtracted in 200 components = 0.000882372 Jy
! Clean residual min=-0.001186 max=0.001317 Jy/beam
! Clean residual mean=-0.000002 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.167046 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 89 components and 0.167046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058898Jy  sigma=1.389458
! Fit after  self-cal, rms=0.058896Jy  sigma=1.389430
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.90633e-05 Jy
! Component: 100  -  total flux cleaned = 0.000143269 Jy
! Component: 150  -  total flux cleaned = 0.000220656 Jy
! Component: 200  -  total flux cleaned = 0.000279528 Jy
! Total flux subtracted in 200 components = 0.000279528 Jy
! Clean residual min=-0.001142 max=0.001295 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.167326 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 0.167326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058894Jy  sigma=1.389356
! Fit after  self-cal, rms=0.058892Jy  sigma=1.389329
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9764 mas, bmaj=1.794 mas, bpa=-4.436 degrees
! Estimated noise=0.192159 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9764 x 1.794 at -4.436 degrees (North through East)
! Clean map  min=-0.0010946  max=0.11952 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7554 mas, bmaj=1.419 mas, bpa=-3.838 degrees
! Estimated noise=0.371681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0913352 Jy
! Component: 100  -  total flux cleaned = 0.122667 Jy
! Component: 150  -  total flux cleaned = 0.137486 Jy
! Component: 200  -  total flux cleaned = 0.145268 Jy
! Total flux subtracted in 200 components = 0.145268 Jy
! Clean residual min=-0.002775 max=0.004003 Jy/beam
! Clean residual mean=-0.000006 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.145268 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.145268 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9764 mas, bmaj=1.794 mas, bpa=-4.436 degrees
! Estimated noise=0.192159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00670239 Jy
! Component: 100  -  total flux cleaned = 0.0104768 Jy
! Component: 150  -  total flux cleaned = 0.0129235 Jy
! Component: 200  -  total flux cleaned = 0.0147037 Jy
! Total flux subtracted in 200 components = 0.0147037 Jy
! Clean residual min=-0.001526 max=0.001308 Jy/beam
! Clean residual mean=-0.000003 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.159971 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 42 components and 0.159971 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.111 mas, bmaj=2.847 mas, bpa=-2.786 degrees
! Estimated noise=0.234792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198637 Jy
! Component: 100  -  total flux cleaned = 0.00324599 Jy
! Component: 150  -  total flux cleaned = 0.0042039 Jy
! Component: 200  -  total flux cleaned = 0.0048921 Jy
! Total flux subtracted in 200 components = 0.0048921 Jy
! Clean residual min=-0.001269 max=0.001439 Jy/beam
! Clean residual mean=-0.000004 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.164863 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000370307 Jy
! Component: 100  -  total flux cleaned = 0.00064417 Jy
! Component: 150  -  total flux cleaned = 0.000882109 Jy
! Component: 200  -  total flux cleaned = 0.00108847 Jy
! Total flux subtracted in 200 components = 0.00108847 Jy
! Clean residual min=-0.001224 max=0.001355 Jy/beam
! Clean residual mean=-0.000003 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.165952 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 88 components and 0.165952 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9764 mas, bmaj=1.794 mas, bpa=-4.436 degrees
! Estimated noise=0.192159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000341594 Jy
! Component: 100  -  total flux cleaned = 0.000519831 Jy
! Component: 150  -  total flux cleaned = 0.000578085 Jy
! Component: 200  -  total flux cleaned = 0.000647933 Jy
! Total flux subtracted in 200 components = 0.000647933 Jy
! Clean residual min=-0.001238 max=0.001237 Jy/beam
! Clean residual mean=-0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.1666 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 105 components and 0.1666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058909Jy  sigma=1.389582
! Fit after  self-cal, rms=0.058900Jy  sigma=1.389385
wmodel /J1028+2401_X_map.mod
! wmodel: Unable to open new model file: /J1028+2401_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1028+2401_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9764 x 1.794 at -4.436 degrees (North through East)
! Clean map  min=-0.0011083  max=0.11937 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1028+2401_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.119373 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000275603 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.692628 0.692628 1.38526 2.77051 5.54102 11.082 22.1641 44.3282 88.6564
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.119 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  433.132 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1028+2401_X_dfm.log closed on Thu May 19 22:20:19 2016