! Started logfile: /scr/pima/bg219h_uvs/J1024+2332_X_dfm.log on Thu May 19 22:19:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1024+2332_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1024+2332_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.819753 visibilities/baseline/integration-bin.
! Found source: J1024+2332
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15936 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1024+2332_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015918Jy  sigma=25.150529
! Fit after  self-cal, rms=0.872230Jy  sigma=21.556432
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7493 mas, bmaj=1.528 mas, bpa=-5.631 degrees
! Estimated noise=0.450427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0926796 Jy
! Component: 100  -  total flux cleaned = 0.120299 Jy
! Total flux subtracted in 100 components = 0.120299 Jy
! Clean residual min=-0.006499 max=0.018457 Jy/beam
! Clean residual mean=-0.000011 rms=0.001894 Jy/beam
! Combined flux in latest and established models = 0.120299 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.120299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071619Jy  sigma=1.680484
! Fit after  self-cal, rms=0.071381Jy  sigma=1.674606
! Inverting map 
! Added new window around map position (1.2, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184923 Jy
! Component: 100  -  total flux cleaned = 0.0295857 Jy
! Total flux subtracted in 100 components = 0.0295857 Jy
! Clean residual min=-0.004645 max=0.008079 Jy/beam
! Clean residual mean=-0.000006 rms=0.001197 Jy/beam
! Combined flux in latest and established models = 0.149885 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.149885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064306Jy  sigma=1.489663
! Fit after  self-cal, rms=0.064098Jy  sigma=1.484435
! Inverting map 
! Added new window around map position (2.2, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00927375 Jy
! Component: 100  -  total flux cleaned = 0.015614 Jy
! Total flux subtracted in 100 components = 0.015614 Jy
! Clean residual min=-0.003433 max=0.005123 Jy/beam
! Clean residual mean=-0.000004 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.165499 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.165499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062018Jy  sigma=1.429577
! Fit after  self-cal, rms=0.061919Jy  sigma=1.427198
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9661 mas, bmaj=1.844 mas, bpa=-2.952 degrees
! Estimated noise=0.24708 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00793639 Jy
! Component: 100  -  total flux cleaned = 0.0126199 Jy
! Component: 150  -  total flux cleaned = 0.0155731 Jy
! Component: 200  -  total flux cleaned = 0.0175323 Jy
! Total flux subtracted in 200 components = 0.0175323 Jy
! Clean residual min=-0.002245 max=0.003453 Jy/beam
! Clean residual mean=-0.000004 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.183031 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 37 components and 0.183031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060828Jy  sigma=1.399113
! Fit after  self-cal, rms=0.060712Jy  sigma=1.396384
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9661 x 1.844 at -2.952 degrees (North through East)
! Clean map  min=-0.00199  max=0.12496 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.96     KP        0.99     
!   LA        1.02     MK        1.03     NL        1.04     OV        1.03     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.04     NL        1.00     OV        1.03     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.96     MK        1.05     NL        1.00     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.98     KP        0.99     
!   LA        1.00     MK        1.04     NL        1.06     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.94     KP        1.03     
!   LA        1.02     MK        1.00     NL        1.05     OV        0.99     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.97     KP        1.01     
!   LA        0.99     MK        1.01     NL        1.03     OV        1.02     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.97     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.01     OV        1.01     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.03     OV        1.05     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.95     KP        0.98     
!   LA        1.00     MK        1.03     NL        1.03     OV        0.98     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.99     KP        1.01     
!   LA        0.98     MK        0.99     NL        1.03     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.95     KP        0.89     
!   LA        1.00     MK        1.04     NL        1.00     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.060712Jy  sigma=1.396384
! Fit after  self-cal, rms=0.059506Jy  sigma=1.391184
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9683 mas, bmaj=1.843 mas, bpa=-2.639 degrees
! Estimated noise=0.244971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000729853 Jy
! Component: 100  -  total flux cleaned = 0.00107229 Jy
! Component: 150  -  total flux cleaned = 0.00103942 Jy
! Component: 200  -  total flux cleaned = 0.000952664 Jy
! Total flux subtracted in 200 components = 0.000952664 Jy
! Clean residual min=-0.002056 max=0.001857 Jy/beam
! Clean residual mean=-0.000002 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.183984 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.183984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059433Jy  sigma=1.389334
! Fit after  self-cal, rms=0.059406Jy  sigma=1.388997
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059406Jy  sigma=1.388997
! Fit after  self-cal, rms=0.059408Jy  sigma=1.385180
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9676 mas, bmaj=1.837 mas, bpa=-2.911 degrees
! Estimated noise=0.244877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000684468 Jy
! Component: 100  -  total flux cleaned = 0.000714136 Jy
! Component: 150  -  total flux cleaned = 0.000758168 Jy
! Component: 200  -  total flux cleaned = 0.00079705 Jy
! Total flux subtracted in 200 components = 0.00079705 Jy
! Clean residual min=-0.001913 max=0.001704 Jy/beam
! Clean residual mean=-0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.184781 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.184781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059386Jy  sigma=1.384556
! Fit after  self-cal, rms=0.059387Jy  sigma=1.384436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207512 Jy
! Component: 100  -  total flux cleaned = 0.000224998 Jy
! Component: 150  -  total flux cleaned = 0.000241922 Jy
! Component: 200  -  total flux cleaned = 0.000286994 Jy
! Total flux subtracted in 200 components = 0.000286994 Jy
! Clean residual min=-0.001888 max=0.001650 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.185068 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.185068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059376Jy  sigma=1.384152
! Fit after  self-cal, rms=0.059373Jy  sigma=1.384108
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059373Jy  sigma=1.384108
! Fit after  self-cal, rms=0.059337Jy  sigma=1.384046
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9677 mas, bmaj=1.837 mas, bpa=-2.9 degrees
! Estimated noise=0.244782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000337487 Jy
! Component: 100  -  total flux cleaned = 0.000440555 Jy
! Component: 150  -  total flux cleaned = 0.000498615 Jy
! Component: 200  -  total flux cleaned = 0.000538652 Jy
! Total flux subtracted in 200 components = 0.000538652 Jy
! Clean residual min=-0.001833 max=0.001568 Jy/beam
! Clean residual mean=-0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.185606 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.185606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059328Jy  sigma=1.383816
! Fit after  self-cal, rms=0.059326Jy  sigma=1.383778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.23602e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104727 Jy
! Component: 150  -  total flux cleaned = 0.000141914 Jy
! Component: 200  -  total flux cleaned = 0.000165418 Jy
! Total flux subtracted in 200 components = 0.000165418 Jy
! Clean residual min=-0.001818 max=0.001540 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.185772 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 0.185772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059320Jy  sigma=1.383637
! Fit after  self-cal, rms=0.059319Jy  sigma=1.383608
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059319Jy  sigma=1.383608
! Fit after  self-cal, rms=0.059277Jy  sigma=1.383585
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.048 mas, bmaj=3.128 mas, bpa=-0.8089 degrees
! Estimated noise=0.304058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000311534 Jy
! Component: 100  -  total flux cleaned = 0.000324272 Jy
! Component: 150  -  total flux cleaned = 0.000350174 Jy
! Component: 200  -  total flux cleaned = 0.000352057 Jy
! Total flux subtracted in 200 components = 0.000352057 Jy
! Clean residual min=-0.001934 max=0.001689 Jy/beam
! Clean residual mean=-0.000002 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.186124 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 70 components and 0.186124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059278Jy  sigma=1.383584
! Fit after  self-cal, rms=0.059272Jy  sigma=1.383483
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.55512e-05 Jy
! Component: 100  -  total flux cleaned = 9.78238e-05 Jy
! Component: 150  -  total flux cleaned = 0.000138495 Jy
! Component: 200  -  total flux cleaned = 0.000139027 Jy
! Total flux subtracted in 200 components = 0.000139027 Jy
! Clean residual min=-0.001928 max=0.001720 Jy/beam
! Clean residual mean=-0.000002 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.186263 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 73 components and 0.186263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059273Jy  sigma=1.383494
! Fit after  self-cal, rms=0.059270Jy  sigma=1.383443
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9678 mas, bmaj=1.837 mas, bpa=-2.881 degrees
! Estimated noise=0.244703 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9678 x 1.837 at -2.881 degrees (North through East)
! Clean map  min=-0.0016687  max=0.12302 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7508 mas, bmaj=1.52 mas, bpa=-5.614 degrees
! Estimated noise=0.446792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.091617 Jy
! Component: 100  -  total flux cleaned = 0.122333 Jy
! Component: 150  -  total flux cleaned = 0.140236 Jy
! Component: 200  -  total flux cleaned = 0.152142 Jy
! Total flux subtracted in 200 components = 0.152142 Jy
! Clean residual min=-0.004048 max=0.006648 Jy/beam
! Clean residual mean=-0.000005 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.152142 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.152142 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9678 mas, bmaj=1.837 mas, bpa=-2.881 degrees
! Estimated noise=0.244703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126402 Jy
! Component: 100  -  total flux cleaned = 0.0204845 Jy
! Component: 150  -  total flux cleaned = 0.0255175 Jy
! Component: 200  -  total flux cleaned = 0.0287649 Jy
! Total flux subtracted in 200 components = 0.0287649 Jy
! Clean residual min=-0.002225 max=0.001885 Jy/beam
! Clean residual mean=-0.000003 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.180907 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 30 components and 0.180907 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.048 mas, bmaj=3.128 mas, bpa=-0.8089 degrees
! Estimated noise=0.304058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305712 Jy
! Component: 100  -  total flux cleaned = 0.00445329 Jy
! Component: 150  -  total flux cleaned = 0.00512549 Jy
! Component: 200  -  total flux cleaned = 0.00538727 Jy
! Total flux subtracted in 200 components = 0.00538727 Jy
! Clean residual min=-0.001961 max=0.001776 Jy/beam
! Clean residual mean=-0.000002 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.186294 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.98574e-05 Jy
! Component: 100  -  total flux cleaned = 4.55846e-05 Jy
! Component: 150  -  total flux cleaned = 4.55411e-05 Jy
! Component: 200  -  total flux cleaned = 4.61737e-05 Jy
! Total flux subtracted in 200 components = 4.61737e-05 Jy
! Clean residual min=-0.001946 max=0.001760 Jy/beam
! Clean residual mean=-0.000002 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.18634 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 48 components and 0.18634 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9678 mas, bmaj=1.837 mas, bpa=-2.881 degrees
! Estimated noise=0.244703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011028 Jy
! Component: 100  -  total flux cleaned = 0.000158389 Jy
! Component: 150  -  total flux cleaned = 0.000179846 Jy
! Component: 200  -  total flux cleaned = 0.000220854 Jy
! Total flux subtracted in 200 components = 0.000220854 Jy
! Clean residual min=-0.001823 max=0.001572 Jy/beam
! Clean residual mean=-0.000000 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.186561 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 59 components and 0.186561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059285Jy  sigma=1.383783
! Fit after  self-cal, rms=0.059277Jy  sigma=1.383580
wmodel /J1024+2332_X_map.mod
! wmodel: Unable to open new model file: /J1024+2332_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1024+2332_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9678 x 1.837 at -2.881 degrees (North through East)
! Clean map  min=-0.0016824  max=0.12272 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1024+2332_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.122719 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000366206 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.895232 0.895232 1.79046 3.58093 7.16185 14.3237 28.6474 57.2948
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.122 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  335.108 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1024+2332_X_dfm.log closed on Thu May 19 22:19:53 2016