! Started logfile: /scr/pima/bg219h_uvs/J1013-2546_S_uvs.log on Thu Apr  7 08:59:03 2016
obs /scr/pima/bg219h_uvs/J1013-2546_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1013-2546_S_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.657265 visibilities/baseline/integration-bin.
! Found source: J1013-2546
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6152 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1013-2546_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013791Jy  sigma=18.433001
! Fit after  self-cal, rms=0.846922Jy  sigma=15.324732
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.372 mas, bmaj=6.292 mas, bpa=-6.772 degrees
! Estimated noise=0.741929 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.115572 Jy
! Component: 100  -  total flux cleaned = 0.145686 Jy
! Total flux subtracted in 100 components = 0.145686 Jy
! Clean residual min=-0.007262 max=0.012638 Jy/beam
! Clean residual mean=-0.000026 rms=0.002008 Jy/beam
! Combined flux in latest and established models = 0.145686 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.145686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087231Jy  sigma=1.494347
! Fit after  self-cal, rms=0.087164Jy  sigma=1.493593
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147632 Jy
! Component: 100  -  total flux cleaned = 0.0241685 Jy
! Total flux subtracted in 100 components = 0.0241685 Jy
! Clean residual min=-0.006240 max=0.008450 Jy/beam
! Clean residual mean=-0.000018 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.169854 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 35 components and 0.169855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083217Jy  sigma=1.410305
! Fit after  self-cal, rms=0.083204Jy  sigma=1.410030
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.894 mas, bmaj=7.361 mas, bpa=-6.845 degrees
! Estimated noise=0.549262 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134622 Jy
! Component: 100  -  total flux cleaned = 0.0217247 Jy
! Component: 150  -  total flux cleaned = 0.0274013 Jy
! Component: 200  -  total flux cleaned = 0.0315139 Jy
! Total flux subtracted in 200 components = 0.0315139 Jy
! Clean residual min=-0.004267 max=0.006776 Jy/beam
! Clean residual mean=-0.000021 rms=0.001282 Jy/beam
! Combined flux in latest and established models = 0.201368 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 85 components and 0.201368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080740Jy  sigma=1.362539
! Fit after  self-cal, rms=0.080566Jy  sigma=1.358527
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.894 x 7.361 at -6.845 degrees (North through East)
! Clean map  min=-0.0037777  max=0.15104 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    HN        1.11     KP        0.96     
!   LA        0.97     MK        0.99     NL        1.11     OV        0.97     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    HN        1.04     KP        0.97     
!   LA        0.96     MK        1.03     NL        0.96     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00*    HN        1.09     KP        0.99     
!   LA        0.93     MK        1.01     NL        0.93     OV        0.97     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.080566Jy  sigma=1.358527
! Fit after  self-cal, rms=0.081254Jy  sigma=1.350202
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.888 mas, bmaj=7.427 mas, bpa=-7.148 degrees
! Estimated noise=0.552909 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328132 Jy
! Component: 100  -  total flux cleaned = 0.00488219 Jy
! Component: 150  -  total flux cleaned = 0.00535551 Jy
! Component: 200  -  total flux cleaned = 0.00548462 Jy
! Total flux subtracted in 200 components = 0.00548462 Jy
! Clean residual min=-0.003263 max=0.004217 Jy/beam
! Clean residual mean=0.000003 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.206853 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 0.206853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081106Jy  sigma=1.347319
! Fit after  self-cal, rms=0.081111Jy  sigma=1.346618
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081111Jy  sigma=1.346618
! Fit after  self-cal, rms=0.081770Jy  sigma=1.344650
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.893 mas, bmaj=7.411 mas, bpa=-7.023 degrees
! Estimated noise=0.552374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000610848 Jy
! Component: 100  -  total flux cleaned = 0.000686276 Jy
! Component: 150  -  total flux cleaned = 0.000719839 Jy
! Component: 200  -  total flux cleaned = 0.000748472 Jy
! Total flux subtracted in 200 components = 0.000748472 Jy
! Clean residual min=-0.003530 max=0.003575 Jy/beam
! Clean residual mean=-0.000005 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.207602 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.207602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081739Jy  sigma=1.343804
! Fit after  self-cal, rms=0.081757Jy  sigma=1.343605
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000284983 Jy
! Component: 100  -  total flux cleaned = 0.000372193 Jy
! Component: 150  -  total flux cleaned = 0.000423753 Jy
! Component: 200  -  total flux cleaned = 0.000472052 Jy
! Total flux subtracted in 200 components = 0.000472052 Jy
! Clean residual min=-0.003563 max=0.003598 Jy/beam
! Clean residual mean=-0.000004 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.208074 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 123 components and 0.208074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081740Jy  sigma=1.343205
! Fit after  self-cal, rms=0.081736Jy  sigma=1.343168
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081736Jy  sigma=1.343168
! Fit after  self-cal, rms=0.081779Jy  sigma=1.342979
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.894 mas, bmaj=7.407 mas, bpa=-7.032 degrees
! Estimated noise=0.551589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.45545e-05 Jy
! Component: 100  -  total flux cleaned = 0.000152757 Jy
! Component: 150  -  total flux cleaned = 0.000226062 Jy
! Component: 200  -  total flux cleaned = 0.000272257 Jy
! Total flux subtracted in 200 components = 0.000272257 Jy
! Clean residual min=-0.003491 max=0.003516 Jy/beam
! Clean residual mean=-0.000005 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.208346 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 128 components and 0.208346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081767Jy  sigma=1.342527
! Fit after  self-cal, rms=0.081766Jy  sigma=1.342498
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155532 Jy
! Component: 100  -  total flux cleaned = 0.000200755 Jy
! Component: 150  -  total flux cleaned = 0.000265106 Jy
! Component: 200  -  total flux cleaned = 0.000306503 Jy
! Total flux subtracted in 200 components = 0.000306503 Jy
! Clean residual min=-0.003473 max=0.003508 Jy/beam
! Clean residual mean=-0.000005 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.208652 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 133 components and 0.208652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081756Jy  sigma=1.342244
! Fit after  self-cal, rms=0.081753Jy  sigma=1.342228
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081753Jy  sigma=1.342228
! Fit after  self-cal, rms=0.081660Jy  sigma=1.342166
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.232 mas, bmaj=16.89 mas, bpa=-2.391 degrees
! Estimated noise=0.724386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001455 Jy
! Component: 100  -  total flux cleaned = 0.00156005 Jy
! Component: 150  -  total flux cleaned = 0.00168185 Jy
! Component: 200  -  total flux cleaned = 0.00182473 Jy
! Total flux subtracted in 200 components = 0.00182473 Jy
! Clean residual min=-0.003564 max=0.004068 Jy/beam
! Clean residual mean=-0.000008 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.210477 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 139 components and 0.210477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081675Jy  sigma=1.342423
! Fit after  self-cal, rms=0.081664Jy  sigma=1.341988
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00050585 Jy
! Component: 100  -  total flux cleaned = 0.000554433 Jy
! Component: 150  -  total flux cleaned = 0.000524786 Jy
! Component: 200  -  total flux cleaned = 0.000554823 Jy
! Total flux subtracted in 200 components = 0.000554823 Jy
! Clean residual min=-0.003541 max=0.004041 Jy/beam
! Clean residual mean=-0.000007 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.211032 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 144 components and 0.211032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081691Jy  sigma=1.342580
! Fit after  self-cal, rms=0.081685Jy  sigma=1.342313
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.894 mas, bmaj=7.407 mas, bpa=-7.052 degrees
! Estimated noise=0.550866 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.894 x 7.407 at -7.052 degrees (North through East)
! Clean map  min=-0.0033511  max=0.14555 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.393 mas, bmaj=6.29 mas, bpa=-6.523 degrees
! Estimated noise=0.74365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114851 Jy
! Component: 100  -  total flux cleaned = 0.144582 Jy
! Component: 150  -  total flux cleaned = 0.159082 Jy
! Component: 200  -  total flux cleaned = 0.169191 Jy
! Total flux subtracted in 200 components = 0.169191 Jy
! Clean residual min=-0.005676 max=0.006204 Jy/beam
! Clean residual mean=-0.000017 rms=0.001385 Jy/beam
! Combined flux in latest and established models = 0.169191 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 0.169191 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.894 mas, bmaj=7.407 mas, bpa=-7.052 degrees
! Estimated noise=0.550866 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127295 Jy
! Component: 100  -  total flux cleaned = 0.0209346 Jy
! Component: 150  -  total flux cleaned = 0.0266301 Jy
! Component: 200  -  total flux cleaned = 0.0306777 Jy
! Total flux subtracted in 200 components = 0.0306777 Jy
! Clean residual min=-0.003349 max=0.004543 Jy/beam
! Clean residual mean=-0.000015 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.199868 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 85 components and 0.199868 Jy
! Inverting map 
! Added new window around map position (-4.5, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412827 Jy
! Component: 100  -  total flux cleaned = 0.00673659 Jy
! Component: 150  -  total flux cleaned = 0.00869011 Jy
! Component: 200  -  total flux cleaned = 0.0101577 Jy
! Total flux subtracted in 200 components = 0.0101577 Jy
! Clean residual min=-0.003291 max=0.003170 Jy/beam
! Clean residual mean=-0.000004 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.210026 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 116 components and 0.210026 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.232 mas, bmaj=16.89 mas, bpa=-2.391 degrees
! Estimated noise=0.724386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137352 Jy
! Component: 100  -  total flux cleaned = 0.00172265 Jy
! Component: 150  -  total flux cleaned = 0.00199556 Jy
! Component: 200  -  total flux cleaned = 0.0021847 Jy
! Total flux subtracted in 200 components = 0.0021847 Jy
! Clean residual min=-0.003038 max=0.003430 Jy/beam
! Clean residual mean=-0.000003 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.212211 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.34782e-05 Jy
! Component: 100  -  total flux cleaned = 7.82932e-05 Jy
! Component: 150  -  total flux cleaned = 0.000142912 Jy
! Component: 200  -  total flux cleaned = 0.000203743 Jy
! Total flux subtracted in 200 components = 0.000203743 Jy
! Clean residual min=-0.003009 max=0.003409 Jy/beam
! Clean residual mean=-0.000003 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.212415 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 140 components and 0.212415 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.894 mas, bmaj=7.407 mas, bpa=-7.052 degrees
! Estimated noise=0.550866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011335 Jy
! Component: 100  -  total flux cleaned = -0.000149802 Jy
! Component: 150  -  total flux cleaned = -0.000149068 Jy
! Component: 200  -  total flux cleaned = -8.97241e-05 Jy
! Total flux subtracted in 200 components = -8.97241e-05 Jy
! Clean residual min=-0.003178 max=0.003194 Jy/beam
! Clean residual mean=-0.000001 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.212325 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 158 components and 0.212325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081565Jy  sigma=1.338475
! Fit after  self-cal, rms=0.081511Jy  sigma=1.337904
wmodel /scr/pima/bg219h_uvs/J1013-2546_S_map.mod
! Writing 158 model components to file: /scr/pima/bg219h_uvs/J1013-2546_S_map.mod
wobs /scr/pima/bg219h_uvs/J1013-2546_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1013-2546_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J1013-2546_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J1013-2546_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117175 Jy
! Component: 100  -  total flux cleaned = 0.000251024 Jy
! Component: 150  -  total flux cleaned = 0.000498521 Jy
! Component: 200  -  total flux cleaned = 0.000831513 Jy
! Component: 250  -  total flux cleaned = 0.00101458 Jy
! Component: 300  -  total flux cleaned = 0.00110332 Jy
! Component: 350  -  total flux cleaned = 0.00118969 Jy
! Component: 400  -  total flux cleaned = 0.0012316 Jy
! Component: 450  -  total flux cleaned = 0.00143835 Jy
! Component: 500  -  total flux cleaned = 0.00151905 Jy
! Component: 550  -  total flux cleaned = 0.00171757 Jy
! Component: 600  -  total flux cleaned = 0.00195037 Jy
! Component: 650  -  total flux cleaned = 0.00202651 Jy
! Component: 700  -  total flux cleaned = 0.00217667 Jy
! Component: 750  -  total flux cleaned = 0.00236067 Jy
! Component: 800  -  total flux cleaned = 0.00246949 Jy
! Component: 850  -  total flux cleaned = 0.00257601 Jy
! Component: 900  -  total flux cleaned = 0.00268064 Jy
! Component: 950  -  total flux cleaned = 0.00261192 Jy
! Component: 1000  -  total flux cleaned = 0.00268042 Jy
! Component: 1050  -  total flux cleaned = 0.00261348 Jy
! Component: 1100  -  total flux cleaned = 0.00258094 Jy
! Component: 1150  -  total flux cleaned = 0.00261367 Jy
! Component: 1200  -  total flux cleaned = 0.00261355 Jy
! Component: 1250  -  total flux cleaned = 0.00258236 Jy
! Component: 1300  -  total flux cleaned = 0.00261348 Jy
! Component: 1350  -  total flux cleaned = 0.00258232 Jy
! Component: 1400  -  total flux cleaned = 0.00261264 Jy
! Component: 1450  -  total flux cleaned = 0.00258277 Jy
! Component: 1500  -  total flux cleaned = 0.00255303 Jy
! Component: 1550  -  total flux cleaned = 0.00258246 Jy
! Component: 1600  -  total flux cleaned = 0.00261169 Jy
! Component: 1650  -  total flux cleaned = 0.00261173 Jy
! Component: 1700  -  total flux cleaned = 0.00255551 Jy
! Component: 1750  -  total flux cleaned = 0.00263925 Jy
! Component: 1800  -  total flux cleaned = 0.0026391 Jy
! Component: 1850  -  total flux cleaned = 0.0025844 Jy
! Component: 1900  -  total flux cleaned = 0.0026113 Jy
! Component: 1950  -  total flux cleaned = 0.00261085 Jy
! Component: 2000  -  total flux cleaned = 0.0025846 Jy
! Component: 2050  -  total flux cleaned = 0.00255797 Jy
! Component: 2100  -  total flux cleaned = 0.00255805 Jy
! Component: 2150  -  total flux cleaned = 0.00260928 Jy
! Component: 2200  -  total flux cleaned = 0.00260916 Jy
! Component: 2250  -  total flux cleaned = 0.00263428 Jy
! Component: 2300  -  total flux cleaned = 0.00263423 Jy
! Component: 2350  -  total flux cleaned = 0.00265918 Jy
! Component: 2400  -  total flux cleaned = 0.00268363 Jy
! Component: 2450  -  total flux cleaned = 0.00265932 Jy
! Component: 2500  -  total flux cleaned = 0.00265907 Jy
! Component: 2550  -  total flux cleaned = 0.00268297 Jy
! Component: 2600  -  total flux cleaned = 0.00270646 Jy
! Component: 2650  -  total flux cleaned = 0.00268288 Jy
! Component: 2700  -  total flux cleaned = 0.00265953 Jy
! Component: 2750  -  total flux cleaned = 0.00265945 Jy
! Component: 2800  -  total flux cleaned = 0.00263667 Jy
! Component: 2850  -  total flux cleaned = 0.0026137 Jy
! Component: 2900  -  total flux cleaned = 0.00268125 Jy
! Component: 2950  -  total flux cleaned = 0.00256949 Jy
! Component: 3000  -  total flux cleaned = 0.00256964 Jy
! Component: 3050  -  total flux cleaned = 0.00250363 Jy
! Component: 3100  -  total flux cleaned = 0.00243794 Jy
! Component: 3150  -  total flux cleaned = 0.00248135 Jy
! Component: 3200  -  total flux cleaned = 0.00252436 Jy
! Component: 3250  -  total flux cleaned = 0.00248171 Jy
! Component: 3300  -  total flux cleaned = 0.00237582 Jy
! Component: 3350  -  total flux cleaned = 0.00239669 Jy
! Component: 3400  -  total flux cleaned = 0.00231349 Jy
! Component: 3450  -  total flux cleaned = 0.00231369 Jy
! Component: 3500  -  total flux cleaned = 0.00229317 Jy
! Component: 3550  -  total flux cleaned = 0.00227275 Jy
! Component: 3600  -  total flux cleaned = 0.00227299 Jy
! Component: 3650  -  total flux cleaned = 0.00225292 Jy
! Component: 3700  -  total flux cleaned = 0.0022529 Jy
! Component: 3750  -  total flux cleaned = 0.00231211 Jy
! Component: 3800  -  total flux cleaned = 0.0023121 Jy
! Component: 3850  -  total flux cleaned = 0.00233145 Jy
! Component: 3900  -  total flux cleaned = 0.00229282 Jy
! Component: 3950  -  total flux cleaned = 0.00229292 Jy
! Component: 4000  -  total flux cleaned = 0.00229295 Jy
! Component: 4050  -  total flux cleaned = 0.00238747 Jy
! Total flux subtracted in 4096 components = 0.00231218 Jy
! Clean residual min=-0.001143 max=0.001091 Jy/beam
! Clean residual mean=0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.214637 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 429 components and 0.214637 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1013-2546_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.894 x 7.407 at -7.052 degrees (North through East)
! Clean map  min=-0.0025376  max=0.14677 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1013-2546_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.146773 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000339717 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.694371 0.694371 1.38874 2.77748 5.55497 11.1099 22.2199 44.4397 88.8795
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.146 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  432.045 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1013-2546_S_uvs.log closed on Thu Apr  7 08:59:07 2016