! Started logfile: /scr/pima/bg219h_uvs/J0954+7435_S_dfm.log on Thu May 19 22:18:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J0954+7435_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0954+7435_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J0954+7435
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7896 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0954+7435_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.162410Jy  sigma=22.772490
! Fit after  self-cal, rms=0.631281Jy  sigma=13.108709
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.419 mas, bmaj=6.401 mas, bpa=82.55 degrees
! Estimated noise=0.737172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.313732 Jy
! Component: 100  -  total flux cleaned = 0.410812 Jy
! Total flux subtracted in 100 components = 0.410812 Jy
! Clean residual min=-0.051314 max=0.159506 Jy/beam
! Clean residual mean=0.000427 rms=0.016271 Jy/beam
! Combined flux in latest and established models = 0.410812 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.410812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.340936Jy  sigma=6.481706
! Fit after  self-cal, rms=0.340898Jy  sigma=6.476461
! Inverting map 
! Added new window around map position (-19.5, -8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.143955 Jy
! Component: 100  -  total flux cleaned = 0.221601 Jy
! Total flux subtracted in 100 components = 0.221601 Jy
! Clean residual min=-0.036700 max=0.073460 Jy/beam
! Clean residual mean=0.000253 rms=0.010259 Jy/beam
! Combined flux in latest and established models = 0.632414 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.632414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.228190Jy  sigma=4.278390
! Fit after  self-cal, rms=0.216346Jy  sigma=4.021788
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0722363 Jy
! Component: 100  -  total flux cleaned = 0.120289 Jy
! Total flux subtracted in 100 components = 0.120289 Jy
! Clean residual min=-0.025022 max=0.041145 Jy/beam
! Clean residual mean=0.000172 rms=0.006654 Jy/beam
! Combined flux in latest and established models = 0.752702 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 54 components and 0.752702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163822Jy  sigma=3.044472
! Fit after  self-cal, rms=0.161499Jy  sigma=2.985062
! Inverting map 
! Added new window around map position (-16.5, -11.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0486674 Jy
! Component: 100  -  total flux cleaned = 0.0830556 Jy
! Total flux subtracted in 100 components = 0.0830556 Jy
! Clean residual min=-0.017219 max=0.029371 Jy/beam
! Clean residual mean=0.000116 rms=0.004701 Jy/beam
! Combined flux in latest and established models = 0.835758 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.835758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129983Jy  sigma=2.395536
! Fit after  self-cal, rms=0.129027Jy  sigma=2.370680
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.041 mas, bmaj=7.302 mas, bpa=83.59 degrees
! Estimated noise=0.468499 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0542942 Jy
! Component: 100  -  total flux cleaned = 0.0919325 Jy
! Component: 150  -  total flux cleaned = 0.120382 Jy
! Component: 200  -  total flux cleaned = 0.142775 Jy
! Total flux subtracted in 200 components = 0.142775 Jy
! Clean residual min=-0.011587 max=0.029872 Jy/beam
! Clean residual mean=0.000054 rms=0.004221 Jy/beam
! Combined flux in latest and established models = 0.978533 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 123 components and 0.978533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091315Jy  sigma=1.698131
! Fit after  self-cal, rms=0.090556Jy  sigma=1.679937
! Inverting map 
! Added new window around map position (-15, -3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0258632 Jy
! Component: 100  -  total flux cleaned = 0.042611 Jy
! Component: 150  -  total flux cleaned = 0.0559763 Jy
! Component: 200  -  total flux cleaned = 0.066887 Jy
! Total flux subtracted in 200 components = 0.066887 Jy
! Clean residual min=-0.008130 max=0.009995 Jy/beam
! Clean residual mean=0.000019 rms=0.002540 Jy/beam
! Combined flux in latest and established models = 1.04542 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 169 components and 1.04542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080040Jy  sigma=1.480674
! Fit after  self-cal, rms=0.079751Jy  sigma=1.476283
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.041 x 7.302 at 83.59 degrees (North through East)
! Clean map  min=-0.0079957  max=0.41849 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00*    HN        0.99     KP        0.96     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.98     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    HN        0.99     KP        0.96     
!   LA        0.98     MK        1.03     NL        0.95     OV        0.99     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00*    HN        1.01     KP        0.98     
!   LA        0.99     MK        1.02     NL        0.91     OV        0.99     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00*    HN        1.02     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.079751Jy  sigma=1.476283
! Fit after  self-cal, rms=0.074870Jy  sigma=1.399041
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.078 mas, bmaj=7.354 mas, bpa=83.44 degrees
! Estimated noise=0.465491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141637 Jy
! Component: 100  -  total flux cleaned = 0.000734491 Jy
! Component: 150  -  total flux cleaned = 0.000593134 Jy
! Component: 200  -  total flux cleaned = 0.000229852 Jy
! Total flux subtracted in 200 components = 0.000229852 Jy
! Clean residual min=-0.006290 max=0.007287 Jy/beam
! Clean residual mean=0.000018 rms=0.001659 Jy/beam
! Combined flux in latest and established models = 1.04565 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 189 components and 1.04565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074226Jy  sigma=1.383385
! Fit after  self-cal, rms=0.074175Jy  sigma=1.382272
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074175Jy  sigma=1.382272
! Fit after  self-cal, rms=0.072711Jy  sigma=1.348461
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.071 mas, bmaj=7.372 mas, bpa=83.8 degrees
! Estimated noise=0.466125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000477384 Jy
! Component: 100  -  total flux cleaned = 0.000360171 Jy
! Component: 150  -  total flux cleaned = 0.000689461 Jy
! Component: 200  -  total flux cleaned = 0.000794006 Jy
! Total flux subtracted in 200 components = 0.000794006 Jy
! Clean residual min=-0.004050 max=0.004515 Jy/beam
! Clean residual mean=-0.000002 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 1.04644 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 206 components and 1.04644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072343Jy  sigma=1.339387
! Fit after  self-cal, rms=0.072323Jy  sigma=1.338903
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (51.5, 75).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246808 Jy
! Component: 100  -  total flux cleaned = 0.00248506 Jy
! Component: 150  -  total flux cleaned = 0.00247594 Jy
! Component: 200  -  total flux cleaned = 0.00247583 Jy
! Total flux subtracted in 200 components = 0.00247583 Jy
! Clean residual min=-0.003687 max=0.003775 Jy/beam
! Clean residual mean=-0.000007 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 1.04892 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 225 components and 1.04892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072036Jy  sigma=1.332070
! Fit after  self-cal, rms=0.072023Jy  sigma=1.331820
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072023Jy  sigma=1.331820
! Fit after  self-cal, rms=0.071779Jy  sigma=1.315382
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=7.384 mas, bpa=83.91 degrees
! Estimated noise=0.467093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00174406 Jy
! Component: 100  -  total flux cleaned = -0.00166814 Jy
! Component: 150  -  total flux cleaned = -0.00159483 Jy
! Component: 200  -  total flux cleaned = -0.00146619 Jy
! Total flux subtracted in 200 components = -0.00146619 Jy
! Clean residual min=-0.003138 max=0.003451 Jy/beam
! Clean residual mean=-0.000001 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 1.04745 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 237 components and 1.04745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071618Jy  sigma=1.312026
! Fit after  self-cal, rms=0.071611Jy  sigma=1.311868
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20.5, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138836 Jy
! Component: 100  -  total flux cleaned = 0.00187642 Jy
! Component: 150  -  total flux cleaned = 0.00220949 Jy
! Component: 200  -  total flux cleaned = 0.0025731 Jy
! Total flux subtracted in 200 components = 0.0025731 Jy
! Clean residual min=-0.002836 max=0.002757 Jy/beam
! Clean residual mean=-0.000002 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 1.05003 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 260 components and 1.05003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071431Jy  sigma=1.308083
! Fit after  self-cal, rms=0.071425Jy  sigma=1.307990
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071425Jy  sigma=1.307990
! Fit after  self-cal, rms=0.071431Jy  sigma=1.307587
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.007 mas, bmaj=11.67 mas, bpa=78.51 degrees
! Estimated noise=0.613717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000816027 Jy
! Component: 100  -  total flux cleaned = -0.000995681 Jy
! Component: 150  -  total flux cleaned = -0.001151 Jy
! Component: 200  -  total flux cleaned = -0.00110592 Jy
! Total flux subtracted in 200 components = -0.00110592 Jy
! Clean residual min=-0.003295 max=0.002429 Jy/beam
! Clean residual mean=0.000005 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 1.04892 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 287 components and 1.04892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071371Jy  sigma=1.306321
! Fit after  self-cal, rms=0.071370Jy  sigma=1.306214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.97261e-06 Jy
! Component: 100  -  total flux cleaned = 2.31223e-07 Jy
! Component: 150  -  total flux cleaned = 2.62644e-07 Jy
! Component: 200  -  total flux cleaned = -4.12167e-07 Jy
! Total flux subtracted in 200 components = -4.12167e-07 Jy
! Clean residual min=-0.003087 max=0.002386 Jy/beam
! Clean residual mean=0.000007 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 1.04892 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 301 components and 1.04892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071346Jy  sigma=1.305642
! Fit after  self-cal, rms=0.071344Jy  sigma=1.305590
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=7.389 mas, bpa=83.99 degrees
! Estimated noise=0.466795 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.072 x 7.389 at 83.99 degrees (North through East)
! Clean map  min=-0.0030419  max=0.41384 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.443 mas, bmaj=6.457 mas, bpa=82.94 degrees
! Estimated noise=0.742602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.340104 Jy
! Component: 100  -  total flux cleaned = 0.495056 Jy
! Component: 150  -  total flux cleaned = 0.590183 Jy
! Component: 200  -  total flux cleaned = 0.658867 Jy
! Total flux subtracted in 200 components = 0.658867 Jy
! Clean residual min=-0.020549 max=0.040122 Jy/beam
! Clean residual mean=0.000166 rms=0.006915 Jy/beam
! Combined flux in latest and established models = 0.658867 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.658867 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=7.389 mas, bpa=83.99 degrees
! Estimated noise=0.466795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0901668 Jy
! Component: 100  -  total flux cleaned = 0.154303 Jy
! Component: 150  -  total flux cleaned = 0.20211 Jy
! Component: 200  -  total flux cleaned = 0.238651 Jy
! Total flux subtracted in 200 components = 0.238651 Jy
! Clean residual min=-0.011266 max=0.021322 Jy/beam
! Clean residual mean=0.000034 rms=0.004359 Jy/beam
! Combined flux in latest and established models = 0.897518 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 91 components and 0.897518 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0283627 Jy
! Component: 100  -  total flux cleaned = 0.0506629 Jy
! Component: 150  -  total flux cleaned = 0.068457 Jy
! Component: 200  -  total flux cleaned = 0.0828089 Jy
! Total flux subtracted in 200 components = 0.0828089 Jy
! Clean residual min=-0.006043 max=0.009372 Jy/beam
! Clean residual mean=0.000017 rms=0.002038 Jy/beam
! Combined flux in latest and established models = 0.980327 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 146 components and 0.980327 Jy
! Inverting map 
! Added new window around map position (-2, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118544 Jy
! Component: 100  -  total flux cleaned = 0.0215241 Jy
! Component: 150  -  total flux cleaned = 0.0295001 Jy
! Component: 200  -  total flux cleaned = 0.0361297 Jy
! Total flux subtracted in 200 components = 0.0361297 Jy
! Clean residual min=-0.003906 max=0.005340 Jy/beam
! Clean residual mean=0.000010 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 1.01646 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 189 components and 1.01646 Jy
! Inverting map 
! Added new window around map position (19.5, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00588006 Jy
! Component: 100  -  total flux cleaned = 0.0106633 Jy
! Component: 150  -  total flux cleaned = 0.0147951 Jy
! Component: 200  -  total flux cleaned = 0.0184215 Jy
! Total flux subtracted in 200 components = 0.0184215 Jy
! Clean residual min=-0.003247 max=0.003396 Jy/beam
! Clean residual mean=0.000005 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 1.03488 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 217 components and 1.03488 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.007 mas, bmaj=11.67 mas, bpa=78.51 degrees
! Estimated noise=0.613717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00532267 Jy
! Component: 100  -  total flux cleaned = 0.00850387 Jy
! Component: 150  -  total flux cleaned = 0.00995948 Jy
! Component: 200  -  total flux cleaned = 0.0109894 Jy
! Total flux subtracted in 200 components = 0.0109894 Jy
! Clean residual min=-0.002960 max=0.003210 Jy/beam
! Clean residual mean=0.000011 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 1.04587 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00089282 Jy
! Component: 100  -  total flux cleaned = 0.00136475 Jy
! Component: 150  -  total flux cleaned = 0.00179107 Jy
! Component: 200  -  total flux cleaned = 0.00217944 Jy
! Total flux subtracted in 200 components = 0.00217944 Jy
! Clean residual min=-0.002746 max=0.002840 Jy/beam
! Clean residual mean=0.000011 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 1.04805 Jy
! Adding 101 model components to the UV plane model.
! The established model now contains 303 components and 1.04805 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.072 mas, bmaj=7.389 mas, bpa=83.99 degrees
! Estimated noise=0.466795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000594037 Jy
! Component: 100  -  total flux cleaned = 0.000773195 Jy
! Component: 150  -  total flux cleaned = 0.000931139 Jy
! Component: 200  -  total flux cleaned = 0.00121235 Jy
! Total flux subtracted in 200 components = 0.00121235 Jy
! Clean residual min=-0.002402 max=0.002433 Jy/beam
! Clean residual mean=0.000003 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 1.04926 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 326 components and 1.04926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071483Jy  sigma=1.308011
! Fit after  self-cal, rms=0.071437Jy  sigma=1.307194
wmodel /J0954+7435_S_map.mod
! wmodel: Unable to open new model file: /J0954+7435_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0954+7435_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.072 x 7.389 at 83.99 degrees (North through East)
! Clean map  min=-0.0031668  max=0.42121 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0954+7435_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.421214 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00061305 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.436631 0.436631 0.873263 1.74653 3.49305 6.9861 13.9722 27.9444 55.8888
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.421 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  687.078 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0954+7435_S_dfm.log closed on Thu May 19 22:18:35 2016