! Started logfile: /scr/pima/bg219h_uvs/J0944+5202_X_dfm.log on Thu May 19 22:17:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0944+5202_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0944+5202_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.880952 visibilities/baseline/integration-bin.
! Found source: J0944+5202
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0944+5202_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028299Jy  sigma=24.894220
! Fit after  self-cal, rms=0.760409Jy  sigma=18.407481
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8128 mas, bmaj=1.004 mas, bpa=-9.58 degrees
! Estimated noise=0.536115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.178353 Jy
! Component: 100  -  total flux cleaned = 0.222731 Jy
! Total flux subtracted in 100 components = 0.222731 Jy
! Clean residual min=-0.010694 max=0.026945 Jy/beam
! Clean residual mean=0.000163 rms=0.002654 Jy/beam
! Combined flux in latest and established models = 0.222731 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.222731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086793Jy  sigma=2.045026
! Fit after  self-cal, rms=0.086634Jy  sigma=2.041979
! Inverting map 
! Added new window around map position (0.2, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0267927 Jy
! Component: 100  -  total flux cleaned = 0.04097 Jy
! Total flux subtracted in 100 components = 0.04097 Jy
! Clean residual min=-0.007564 max=0.018572 Jy/beam
! Clean residual mean=0.000118 rms=0.001903 Jy/beam
! Combined flux in latest and established models = 0.263701 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.263701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076055Jy  sigma=1.786935
! Fit after  self-cal, rms=0.075564Jy  sigma=1.776425
! Inverting map 
! Added new window around map position (1.8, -3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156029 Jy
! Component: 100  -  total flux cleaned = 0.0246032 Jy
! Total flux subtracted in 100 components = 0.0246032 Jy
! Clean residual min=-0.006728 max=0.009472 Jy/beam
! Clean residual mean=0.000093 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 0.288304 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.288304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070687Jy  sigma=1.652492
! Fit after  self-cal, rms=0.070423Jy  sigma=1.646390
! Inverting map 
! Added new window around map position (2.4, -5.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00948076 Jy
! Component: 100  -  total flux cleaned = 0.0163022 Jy
! Total flux subtracted in 100 components = 0.0163022 Jy
! Clean residual min=-0.005729 max=0.007311 Jy/beam
! Clean residual mean=0.000077 rms=0.001309 Jy/beam
! Combined flux in latest and established models = 0.304607 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 33 components and 0.304607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068158Jy  sigma=1.588542
! Fit after  self-cal, rms=0.068053Jy  sigma=1.586014
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=1.326 mas, bpa=-11.58 degrees
! Estimated noise=0.283177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011466 Jy
! Component: 100  -  total flux cleaned = 0.0193882 Jy
! Component: 150  -  total flux cleaned = 0.025475 Jy
! Component: 200  -  total flux cleaned = 0.0302234 Jy
! Total flux subtracted in 200 components = 0.0302234 Jy
! Clean residual min=-0.003902 max=0.005764 Jy/beam
! Clean residual mean=0.000106 rms=0.001077 Jy/beam
! Combined flux in latest and established models = 0.33483 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 56 components and 0.33483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065521Jy  sigma=1.521960
! Fit after  self-cal, rms=0.065282Jy  sigma=1.516062
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.06 x 1.326 at -11.58 degrees (North through East)
! Clean map  min=-0.0032053  max=0.23634 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.99     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.02     OV        1.03     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.94     KP        0.96     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.98     KP        0.99     
!   LA        0.96     MK        1.03     NL        0.98     OV        1.02     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.96     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.03     OV        1.02     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.98     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.96     KP        0.97     
!   LA        1.00     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        0.96     
!   LA        0.98     MK        0.98     NL        0.99     OV        1.01     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.95     KP        0.97     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.02     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.96     KP        0.97     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.97     KP        0.98     
!   LA        0.97     MK        1.00     NL        0.99     OV        1.02     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.97     KP        0.97     
!   LA        0.98     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.96     KP        1.00     
!   LA        0.99     MK        1.02     NL        0.99     OV        1.02     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.065282Jy  sigma=1.516062
! Fit after  self-cal, rms=0.063740Jy  sigma=1.497458
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.331 mas, bpa=-11.59 degrees
! Estimated noise=0.279857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 31.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0044291 Jy
! Component: 100  -  total flux cleaned = 0.00736366 Jy
! Component: 150  -  total flux cleaned = 0.00955538 Jy
! Component: 200  -  total flux cleaned = 0.0109844 Jy
! Total flux subtracted in 200 components = 0.0109844 Jy
! Clean residual min=-0.002309 max=0.002786 Jy/beam
! Clean residual mean=0.000021 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.345814 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 85 components and 0.345814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063375Jy  sigma=1.487540
! Fit after  self-cal, rms=0.063359Jy  sigma=1.486980
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063359Jy  sigma=1.486980
! Fit after  self-cal, rms=0.063278Jy  sigma=1.482581
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.331 mas, bpa=-11.98 degrees
! Estimated noise=0.280208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182774 Jy
! Component: 100  -  total flux cleaned = 0.00278182 Jy
! Component: 150  -  total flux cleaned = 0.00335004 Jy
! Component: 200  -  total flux cleaned = 0.00365136 Jy
! Total flux subtracted in 200 components = 0.00365136 Jy
! Clean residual min=-0.002200 max=0.002506 Jy/beam
! Clean residual mean=0.000014 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.349466 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 100 components and 0.349466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063205Jy  sigma=1.480617
! Fit after  self-cal, rms=0.063196Jy  sigma=1.480458
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-40.4, -50.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214986 Jy
! Component: 100  -  total flux cleaned = 0.00332666 Jy
! Component: 150  -  total flux cleaned = 0.00421256 Jy
! Component: 200  -  total flux cleaned = 0.00455687 Jy
! Total flux subtracted in 200 components = 0.00455687 Jy
! Clean residual min=-0.002026 max=0.002256 Jy/beam
! Clean residual mean=0.000008 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.354023 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 118 components and 0.354023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063114Jy  sigma=1.478268
! Fit after  self-cal, rms=0.063110Jy  sigma=1.478157
! Inverting map 
! Added new window around map position (0.6, -19.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150454 Jy
! Component: 100  -  total flux cleaned = 0.00178191 Jy
! Component: 150  -  total flux cleaned = 0.0019199 Jy
! Component: 200  -  total flux cleaned = 0.00204755 Jy
! Total flux subtracted in 200 components = 0.00204755 Jy
! Clean residual min=-0.001854 max=0.002197 Jy/beam
! Clean residual mean=0.000004 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.35607 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 126 components and 0.35607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063040Jy  sigma=1.476590
! Fit after  self-cal, rms=0.063038Jy  sigma=1.476530
! Inverting map 
! Added new window around map position (35.6, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217524 Jy
! Component: 100  -  total flux cleaned = 0.00341555 Jy
! Component: 150  -  total flux cleaned = 0.00411671 Jy
! Component: 200  -  total flux cleaned = 0.00452864 Jy
! Total flux subtracted in 200 components = 0.00452864 Jy
! Clean residual min=-0.001783 max=0.001717 Jy/beam
! Clean residual mean=-0.000000 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.360599 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 147 components and 0.360599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062960Jy  sigma=1.474271
! Fit after  self-cal, rms=0.062953Jy  sigma=1.474180
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062953Jy  sigma=1.474180
! Fit after  self-cal, rms=0.062874Jy  sigma=1.473784
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=1.33 mas, bpa=-12.02 degrees
! Estimated noise=0.280151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00094292 Jy
! Component: 100  -  total flux cleaned = 0.00146842 Jy
! Component: 150  -  total flux cleaned = 0.00166366 Jy
! Component: 200  -  total flux cleaned = 0.00179513 Jy
! Total flux subtracted in 200 components = 0.00179513 Jy
! Clean residual min=-0.001678 max=0.001645 Jy/beam
! Clean residual mean=-0.000000 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.362394 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 151 components and 0.362394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062848Jy  sigma=1.473157
! Fit after  self-cal, rms=0.062845Jy  sigma=1.473139
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185522 Jy
! Component: 100  -  total flux cleaned = 0.000309155 Jy
! Component: 150  -  total flux cleaned = 0.000403288 Jy
! Component: 200  -  total flux cleaned = 0.000493239 Jy
! Total flux subtracted in 200 components = 0.000493239 Jy
! Clean residual min=-0.001665 max=0.001611 Jy/beam
! Clean residual mean=-0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.362887 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 157 components and 0.362887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062829Jy  sigma=1.472748
! Fit after  self-cal, rms=0.062828Jy  sigma=1.472742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062828Jy  sigma=1.472742
! Fit after  self-cal, rms=0.062820Jy  sigma=1.472701
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.327 mas, bmaj=2.493 mas, bpa=16.41 degrees
! Estimated noise=0.346577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000615478 Jy
! Component: 100  -  total flux cleaned = 0.000863365 Jy
! Component: 150  -  total flux cleaned = 0.00103012 Jy
! Component: 200  -  total flux cleaned = 0.00118112 Jy
! Total flux subtracted in 200 components = 0.00118112 Jy
! Clean residual min=-0.002243 max=0.001762 Jy/beam
! Clean residual mean=-0.000004 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.364068 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 168 components and 0.364068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062812Jy  sigma=1.472448
! Fit after  self-cal, rms=0.062810Jy  sigma=1.472425
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152941 Jy
! Component: 100  -  total flux cleaned = 0.000231067 Jy
! Component: 150  -  total flux cleaned = 0.000303327 Jy
! Component: 200  -  total flux cleaned = 0.000337105 Jy
! Total flux subtracted in 200 components = 0.000337105 Jy
! Clean residual min=-0.002181 max=0.001767 Jy/beam
! Clean residual mean=-0.000005 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.364405 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 172 components and 0.364405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062805Jy  sigma=1.472300
! Fit after  self-cal, rms=0.062804Jy  sigma=1.472284
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=1.329 mas, bpa=-12.04 degrees
! Estimated noise=0.280217 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.065 x 1.329 at -12.04 degrees (North through East)
! Clean map  min=-0.001448  max=0.23378 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8146 mas, bmaj=1.006 mas, bpa=-10.32 degrees
! Estimated noise=0.532607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.176661 Jy
! Component: 100  -  total flux cleaned = 0.226786 Jy
! Component: 150  -  total flux cleaned = 0.253481 Jy
! Component: 200  -  total flux cleaned = 0.270515 Jy
! Total flux subtracted in 200 components = 0.270515 Jy
! Clean residual min=-0.006098 max=0.009539 Jy/beam
! Clean residual mean=0.000092 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 0.270515 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.270515 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=1.329 mas, bpa=-12.04 degrees
! Estimated noise=0.280217 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195101 Jy
! Component: 100  -  total flux cleaned = 0.0328895 Jy
! Component: 150  -  total flux cleaned = 0.0428706 Jy
! Component: 200  -  total flux cleaned = 0.0506026 Jy
! Total flux subtracted in 200 components = 0.0506026 Jy
! Clean residual min=-0.003357 max=0.005078 Jy/beam
! Clean residual mean=0.000084 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.321117 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 44 components and 0.321117 Jy
! Inverting map 
! Added new window around map position (0.8, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00617246 Jy
! Component: 100  -  total flux cleaned = 0.0109977 Jy
! Component: 150  -  total flux cleaned = 0.0149249 Jy
! Component: 200  -  total flux cleaned = 0.0182813 Jy
! Total flux subtracted in 200 components = 0.0182813 Jy
! Clean residual min=-0.002534 max=0.003041 Jy/beam
! Clean residual mean=0.000042 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.339399 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 77 components and 0.339399 Jy
! Inverting map 
! Added new window around map position (3, -8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00321494 Jy
! Component: 100  -  total flux cleaned = 0.00582133 Jy
! Component: 150  -  total flux cleaned = 0.00811376 Jy
! Component: 200  -  total flux cleaned = 0.0101427 Jy
! Total flux subtracted in 200 components = 0.0101427 Jy
! Clean residual min=-0.002091 max=0.002335 Jy/beam
! Clean residual mean=0.000022 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.349541 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 95 components and 0.349541 Jy
! Inverting map 
! Added new window around map position (4.6, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221222 Jy
! Component: 100  -  total flux cleaned = 0.00393264 Jy
! Component: 150  -  total flux cleaned = 0.00547688 Jy
! Component: 200  -  total flux cleaned = 0.00687085 Jy
! Total flux subtracted in 200 components = 0.00687085 Jy
! Clean residual min=-0.001805 max=0.001738 Jy/beam
! Clean residual mean=0.000012 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.356412 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 117 components and 0.356412 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.327 mas, bmaj=2.493 mas, bpa=16.41 degrees
! Estimated noise=0.346577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210133 Jy
! Component: 100  -  total flux cleaned = 0.00344951 Jy
! Component: 150  -  total flux cleaned = 0.00434281 Jy
! Component: 200  -  total flux cleaned = 0.00510018 Jy
! Total flux subtracted in 200 components = 0.00510018 Jy
! Clean residual min=-0.001951 max=0.001818 Jy/beam
! Clean residual mean=0.000005 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.361512 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000720474 Jy
! Component: 100  -  total flux cleaned = 0.00122064 Jy
! Component: 150  -  total flux cleaned = 0.00160954 Jy
! Component: 200  -  total flux cleaned = 0.00191161 Jy
! Total flux subtracted in 200 components = 0.00191161 Jy
! Clean residual min=-0.001842 max=0.001735 Jy/beam
! Clean residual mean=-0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.363424 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 189 components and 0.363424 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=1.329 mas, bpa=-12.04 degrees
! Estimated noise=0.280217 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012926 Jy
! Component: 100  -  total flux cleaned = 0.000126123 Jy
! Component: 150  -  total flux cleaned = 0.000191084 Jy
! Component: 200  -  total flux cleaned = 0.000311429 Jy
! Total flux subtracted in 200 components = 0.000311429 Jy
! Clean residual min=-0.001679 max=0.001522 Jy/beam
! Clean residual mean=-0.000000 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.363735 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 209 components and 0.363735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062782Jy  sigma=1.471651
! Fit after  self-cal, rms=0.062763Jy  sigma=1.471307
wmodel /J0944+5202_X_map.mod
! wmodel: Unable to open new model file: /J0944+5202_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0944+5202_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.065 x 1.329 at -12.04 degrees (North through East)
! Clean map  min=-0.0015352  max=0.23308 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0944+5202_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.233083 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000365591 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.470552 0.470552 0.941103 1.88221 3.76441 7.52883 15.0577 30.1153 60.2306
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.233 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  637.549 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0944+5202_X_dfm.log closed on Thu May 19 22:17:56 2016