! Started logfile: /scr/pima/bg219h_uvs/J0930+7420_X_dfm.log on Thu May 19 22:17:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0930+7420_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0930+7420_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.860684 visibilities/baseline/integration-bin.
! Found source: J0930+7420
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24168 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0930+7420_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.033081Jy  sigma=23.203364
! Fit after  self-cal, rms=0.790814Jy  sigma=17.590403
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6597 mas, bmaj=1.839 mas, bpa=84.21 degrees
! Estimated noise=0.497752 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.145695 Jy
! Component: 100  -  total flux cleaned = 0.192164 Jy
! Total flux subtracted in 100 components = 0.192164 Jy
! Clean residual min=-0.015079 max=0.046048 Jy/beam
! Clean residual mean=0.000005 rms=0.003760 Jy/beam
! Combined flux in latest and established models = 0.192164 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.192164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111305Jy  sigma=2.418620
! Fit after  self-cal, rms=0.111021Jy  sigma=2.414643
! Inverting map 
! Added new window around map position (-0.8, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.041933 Jy
! Component: 100  -  total flux cleaned = 0.0646809 Jy
! Total flux subtracted in 100 components = 0.0646809 Jy
! Clean residual min=-0.009702 max=0.015564 Jy/beam
! Clean residual mean=0.000003 rms=0.002199 Jy/beam
! Combined flux in latest and established models = 0.256844 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.256844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084846Jy  sigma=1.794927
! Fit after  self-cal, rms=0.082624Jy  sigma=1.743087
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204114 Jy
! Component: 100  -  total flux cleaned = 0.0324642 Jy
! Total flux subtracted in 100 components = 0.0324642 Jy
! Clean residual min=-0.005652 max=0.007876 Jy/beam
! Clean residual mean=0.000002 rms=0.001360 Jy/beam
! Combined flux in latest and established models = 0.289309 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 44 components and 0.289309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074114Jy  sigma=1.537236
! Fit after  self-cal, rms=0.073428Jy  sigma=1.522007
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112961 Jy
! Component: 100  -  total flux cleaned = 0.017951 Jy
! Total flux subtracted in 100 components = 0.017951 Jy
! Clean residual min=-0.004022 max=0.004857 Jy/beam
! Clean residual mean=0.000001 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.30726 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 52 components and 0.30726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070669Jy  sigma=1.455253
! Fit after  self-cal, rms=0.070398Jy  sigma=1.449676
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00643687 Jy
! Component: 100  -  total flux cleaned = 0.0103149 Jy
! Total flux subtracted in 100 components = 0.0103149 Jy
! Clean residual min=-0.003431 max=0.003794 Jy/beam
! Clean residual mean=0.000001 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.317575 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 58 components and 0.317575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069490Jy  sigma=1.427695
! Fit after  self-cal, rms=0.069393Jy  sigma=1.425765
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.891 mas, bmaj=2.209 mas, bpa=83.78 degrees
! Estimated noise=0.215951 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055341 Jy
! Component: 100  -  total flux cleaned = 0.00851229 Jy
! Component: 150  -  total flux cleaned = 0.0103792 Jy
! Component: 200  -  total flux cleaned = 0.0111576 Jy
! Total flux subtracted in 200 components = 0.0111576 Jy
! Clean residual min=-0.002036 max=0.002971 Jy/beam
! Clean residual mean=0.000000 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.328732 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 71 components and 0.328732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068939Jy  sigma=1.415250
! Fit after  self-cal, rms=0.068892Jy  sigma=1.414333
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.891 x 2.209 at 83.78 degrees (North through East)
! Clean map  min=-0.0019603  max=0.19591 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.98     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.01     OV        1.03     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.94     KP        0.98     
!   LA        1.00     MK        1.04     NL        1.01     OV        1.01     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.97     KP        0.97     
!   LA        1.02     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.01     MK        1.06     NL        1.02     OV        0.99     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.97     KP        0.98     
!   LA        0.98     MK        1.03     NL        1.01     OV        1.02     
!   PT        1.00     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00     KP        0.99     
!   LA        1.01     MK        1.04     NL        1.01     OV        1.01     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.99     KP        0.99     
!   LA        1.01     MK        1.00     NL        1.01     OV        1.02     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.97     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.00     OV        1.03     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.98     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.02     OV        1.01     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.94     KP        1.01     
!   LA        1.02     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.01     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.068892Jy  sigma=1.414333
! Fit after  self-cal, rms=0.067990Jy  sigma=1.408552
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.891 mas, bmaj=2.208 mas, bpa=83.75 degrees
! Estimated noise=0.215248 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00313717 Jy
! Component: 100  -  total flux cleaned = 0.00493725 Jy
! Component: 150  -  total flux cleaned = 0.00577217 Jy
! Component: 200  -  total flux cleaned = 0.00603771 Jy
! Total flux subtracted in 200 components = 0.00603771 Jy
! Clean residual min=-0.002242 max=0.001859 Jy/beam
! Clean residual mean=-0.000003 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.33477 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 103 components and 0.33477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067838Jy  sigma=1.404548
! Fit after  self-cal, rms=0.067816Jy  sigma=1.404284
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067816Jy  sigma=1.404284
! Fit after  self-cal, rms=0.067567Jy  sigma=1.401606
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8908 mas, bmaj=2.216 mas, bpa=83.72 degrees
! Estimated noise=0.215116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112818 Jy
! Component: 100  -  total flux cleaned = 0.00108411 Jy
! Component: 150  -  total flux cleaned = 0.00100701 Jy
! Component: 200  -  total flux cleaned = 0.00103972 Jy
! Total flux subtracted in 200 components = 0.00103972 Jy
! Clean residual min=-0.001618 max=0.001569 Jy/beam
! Clean residual mean=-0.000002 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.33581 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 112 components and 0.33581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067520Jy  sigma=1.400326
! Fit after  self-cal, rms=0.067514Jy  sigma=1.400202
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012596 Jy
! Component: 100  -  total flux cleaned = 0.000228905 Jy
! Component: 150  -  total flux cleaned = 0.000260111 Jy
! Component: 200  -  total flux cleaned = 0.000341898 Jy
! Total flux subtracted in 200 components = 0.000341898 Jy
! Clean residual min=-0.001584 max=0.001528 Jy/beam
! Clean residual mean=-0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.336152 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 115 components and 0.336152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067488Jy  sigma=1.399559
! Fit after  self-cal, rms=0.067482Jy  sigma=1.399491
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067482Jy  sigma=1.399491
! Fit after  self-cal, rms=0.067478Jy  sigma=1.399372
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.891 mas, bmaj=2.219 mas, bpa=83.68 degrees
! Estimated noise=0.215145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00037698 Jy
! Component: 100  -  total flux cleaned = 0.000439795 Jy
! Component: 150  -  total flux cleaned = 0.000440822 Jy
! Component: 200  -  total flux cleaned = 0.000511377 Jy
! Total flux subtracted in 200 components = 0.000511377 Jy
! Clean residual min=-0.001527 max=0.001456 Jy/beam
! Clean residual mean=-0.000002 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.336663 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 120 components and 0.336663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067456Jy  sigma=1.398819
! Fit after  self-cal, rms=0.067452Jy  sigma=1.398757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.70584e-05 Jy
! Component: 100  -  total flux cleaned = 0.000195914 Jy
! Component: 150  -  total flux cleaned = 0.0002161 Jy
! Component: 200  -  total flux cleaned = 0.000216522 Jy
! Total flux subtracted in 200 components = 0.000216522 Jy
! Clean residual min=-0.001505 max=0.001421 Jy/beam
! Clean residual mean=-0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.33688 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.33688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067438Jy  sigma=1.398420
! Fit after  self-cal, rms=0.067435Jy  sigma=1.398380
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067435Jy  sigma=1.398380
! Fit after  self-cal, rms=0.067435Jy  sigma=1.398335
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.217 mas, bmaj=3.41 mas, bpa=78.8 degrees
! Estimated noise=0.26926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000626796 Jy
! Component: 100  -  total flux cleaned = 0.000696943 Jy
! Component: 150  -  total flux cleaned = 0.000679747 Jy
! Component: 200  -  total flux cleaned = 0.000665871 Jy
! Total flux subtracted in 200 components = 0.000665871 Jy
! Clean residual min=-0.001548 max=0.001448 Jy/beam
! Clean residual mean=-0.000004 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.337545 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 134 components and 0.337545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067430Jy  sigma=1.398128
! Fit after  self-cal, rms=0.067426Jy  sigma=1.398084
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.32061e-05 Jy
! Component: 100  -  total flux cleaned = 0.000124294 Jy
! Component: 150  -  total flux cleaned = 0.000150182 Jy
! Component: 200  -  total flux cleaned = 0.000161829 Jy
! Total flux subtracted in 200 components = 0.000161829 Jy
! Clean residual min=-0.001542 max=0.001365 Jy/beam
! Clean residual mean=-0.000004 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.337707 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 139 components and 0.337707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067423Jy  sigma=1.397963
! Fit after  self-cal, rms=0.067420Jy  sigma=1.397933
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8912 mas, bmaj=2.221 mas, bpa=83.66 degrees
! Estimated noise=0.215169 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8912 x 2.221 at 83.66 degrees (North through East)
! Clean map  min=-0.0013974  max=0.19462 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6606 mas, bmaj=1.852 mas, bpa=84.12 degrees
! Estimated noise=0.496248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146532 Jy
! Component: 100  -  total flux cleaned = 0.207007 Jy
! Component: 150  -  total flux cleaned = 0.243702 Jy
! Component: 200  -  total flux cleaned = 0.267632 Jy
! Total flux subtracted in 200 components = 0.267632 Jy
! Clean residual min=-0.005086 max=0.012903 Jy/beam
! Clean residual mean=0.000003 rms=0.001597 Jy/beam
! Combined flux in latest and established models = 0.267632 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.267632 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8912 mas, bmaj=2.221 mas, bpa=83.66 degrees
! Estimated noise=0.215169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.026272 Jy
! Component: 100  -  total flux cleaned = 0.0402028 Jy
! Component: 150  -  total flux cleaned = 0.0483667 Jy
! Component: 200  -  total flux cleaned = 0.0534903 Jy
! Total flux subtracted in 200 components = 0.0534903 Jy
! Clean residual min=-0.001952 max=0.003880 Jy/beam
! Clean residual mean=0.000003 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.321122 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 55 components and 0.321122 Jy
! Inverting map 
! Added new window around map position (-3.6, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403489 Jy
! Component: 100  -  total flux cleaned = 0.00697118 Jy
! Component: 150  -  total flux cleaned = 0.00925316 Jy
! Component: 200  -  total flux cleaned = 0.011043 Jy
! Total flux subtracted in 200 components = 0.011043 Jy
! Clean residual min=-0.001671 max=0.001555 Jy/beam
! Clean residual mean=-0.000000 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.332165 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 91 components and 0.332165 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.217 mas, bmaj=3.41 mas, bpa=78.8 degrees
! Estimated noise=0.26926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228949 Jy
! Component: 100  -  total flux cleaned = 0.00337695 Jy
! Component: 150  -  total flux cleaned = 0.00389807 Jy
! Component: 200  -  total flux cleaned = 0.00430054 Jy
! Total flux subtracted in 200 components = 0.00430054 Jy
! Clean residual min=-0.001701 max=0.001407 Jy/beam
! Clean residual mean=-0.000003 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.336466 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000292383 Jy
! Component: 100  -  total flux cleaned = 0.000507424 Jy
! Component: 150  -  total flux cleaned = 0.00066651 Jy
! Component: 200  -  total flux cleaned = 0.000784582 Jy
! Total flux subtracted in 200 components = 0.000784582 Jy
! Clean residual min=-0.001562 max=0.001315 Jy/beam
! Clean residual mean=-0.000004 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.33725 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 136 components and 0.33725 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8912 mas, bmaj=2.221 mas, bpa=83.66 degrees
! Estimated noise=0.215169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.65071e-05 Jy
! Component: 100  -  total flux cleaned = 4.80868e-05 Jy
! Component: 150  -  total flux cleaned = 9.43912e-05 Jy
! Component: 200  -  total flux cleaned = 9.45923e-05 Jy
! Total flux subtracted in 200 components = 9.45923e-05 Jy
! Clean residual min=-0.001486 max=0.001346 Jy/beam
! Clean residual mean=-0.000002 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.337345 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 154 components and 0.337345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067416Jy  sigma=1.397784
! Fit after  self-cal, rms=0.067408Jy  sigma=1.397539
wmodel /J0930+7420_X_map.mod
! wmodel: Unable to open new model file: /J0930+7420_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0930+7420_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8912 x 2.221 at 83.66 degrees (North through East)
! Clean map  min=-0.0013571  max=0.19515 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0930+7420_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.195153 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000314833 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.483979 0.483979 0.967959 1.93592 3.87184 7.74367 15.4873 30.9747 61.9494
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.195 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  619.861 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0930+7420_X_dfm.log closed on Thu May 19 22:17:40 2016