! Started logfile: /scr/pima/bg219h_uvs/J0927+5717_X_dfm.log on Thu May 19 22:17:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0927+5717_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0927+5717_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.891453 visibilities/baseline/integration-bin.
! Found source: J0927+5717
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25032 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0927+5717_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004103Jy  sigma=25.398438
! Fit after  self-cal, rms=0.942497Jy  sigma=23.830470
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8018 mas, bmaj=0.9742 mas, bpa=-11.71 degrees
! Estimated noise=0.463499 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0444552 Jy
! Component: 100  -  total flux cleaned = 0.0551744 Jy
! Total flux subtracted in 100 components = 0.0551744 Jy
! Clean residual min=-0.003305 max=0.004128 Jy/beam
! Clean residual mean=0.000006 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.0551744 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0551744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059403Jy  sigma=1.405459
! Fit after  self-cal, rms=0.058231Jy  sigma=1.377064
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00506416 Jy
! Component: 100  -  total flux cleaned = 0.00752662 Jy
! Total flux subtracted in 100 components = 0.00752662 Jy
! Clean residual min=-0.003013 max=0.003106 Jy/beam
! Clean residual mean=0.000003 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.062701 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.062701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057777Jy  sigma=1.364295
! Fit after  self-cal, rms=0.057780Jy  sigma=1.364110
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=1.282 mas, bpa=-1.698 degrees
! Estimated noise=0.189417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153462 Jy
! Component: 100  -  total flux cleaned = 0.00201569 Jy
! Component: 150  -  total flux cleaned = 0.00201522 Jy
! Component: 200  -  total flux cleaned = 0.00199521 Jy
! Total flux subtracted in 200 components = 0.00199521 Jy
! Clean residual min=-0.001312 max=0.001290 Jy/beam
! Clean residual mean=0.000004 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0646962 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.0646962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057737Jy  sigma=1.363064
! Fit after  self-cal, rms=0.057740Jy  sigma=1.363027
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 1.282 at -1.698 degrees (North through East)
! Clean map  min=-0.0012142  max=0.060075 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.96     KP        1.03     
!   LA        0.93     MK        1.01     NL        1.02     OV        1.05     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        0.95     KP        0.99     
!   LA        1.02     MK        1.05     NL        1.01     OV        0.95     
!   PT        1.00     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HN        0.94     KP        1.01     
!   LA        1.00     MK        1.08     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.89     KP        1.04     
!   LA        0.94     MK        1.02     NL        1.05     OV        0.96     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.89     KP        1.03     
!   LA        1.00     MK        1.06     NL        1.02     OV        1.02     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        0.94     KP        0.97     
!   LA        0.98     MK        1.09     NL        1.03     OV        0.96     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        0.97     KP        1.10     
!   LA        0.99     MK        0.97     NL        1.04     OV        1.00     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.03     KP        1.04     
!   LA        0.98     MK        0.97     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.91     KP        1.02     
!   LA        1.00     MK        1.00     NL        1.04     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        0.86     KP        0.98     
!   LA        1.00     MK        1.04     NL        1.01     OV        1.06     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.89     KP        1.05     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.89     KP        1.06     
!   LA        1.04     MK        0.99     NL        1.02     OV        0.97     
!   PT        0.98     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.057740Jy  sigma=1.363027
! Fit after  self-cal, rms=0.056748Jy  sigma=1.360361
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=1.281 mas, bpa=-1.161 degrees
! Estimated noise=0.188591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.48279e-05 Jy
! Component: 100  -  total flux cleaned = 7.10495e-05 Jy
! Component: 150  -  total flux cleaned = 4.69104e-05 Jy
! Component: 200  -  total flux cleaned = 2.50542e-05 Jy
! Total flux subtracted in 200 components = 2.50542e-05 Jy
! Clean residual min=-0.001180 max=0.001097 Jy/beam
! Clean residual mean=0.000002 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.0647213 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 24 components and 0.0647213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056740Jy  sigma=1.360186
! Fit after  self-cal, rms=0.056734Jy  sigma=1.359997
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056734Jy  sigma=1.359997
! Fit after  self-cal, rms=0.056774Jy  sigma=1.358058
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=1.281 mas, bpa=-0.7148 degrees
! Estimated noise=0.188467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.34631e-05 Jy
! Component: 100  -  total flux cleaned = 2.23771e-05 Jy
! Component: 150  -  total flux cleaned = 1.21337e-05 Jy
! Component: 200  -  total flux cleaned = -7.32352e-06 Jy
! Total flux subtracted in 200 components = -7.32352e-06 Jy
! Clean residual min=-0.001082 max=0.001084 Jy/beam
! Clean residual mean=0.000003 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.064714 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 25 components and 0.064714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056769Jy  sigma=1.357953
! Fit after  self-cal, rms=0.056780Jy  sigma=1.357832
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.48842e-05 Jy
! Component: 100  -  total flux cleaned = 4.59451e-06 Jy
! Component: 150  -  total flux cleaned = -4.34415e-06 Jy
! Component: 200  -  total flux cleaned = -1.31065e-05 Jy
! Total flux subtracted in 200 components = -1.31065e-05 Jy
! Clean residual min=-0.001080 max=0.001094 Jy/beam
! Clean residual mean=0.000003 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.0647008 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 0.0647008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056776Jy  sigma=1.357763
! Fit after  self-cal, rms=0.056776Jy  sigma=1.357752
! Inverting map 
! Added new window around map position (21.6, 14.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102571 Jy
! Component: 100  -  total flux cleaned = 0.00107544 Jy
! Component: 150  -  total flux cleaned = 0.00107597 Jy
! Component: 200  -  total flux cleaned = 0.00106135 Jy
! Total flux subtracted in 200 components = 0.00106135 Jy
! Clean residual min=-0.001080 max=0.000976 Jy/beam
! Clean residual mean=0.000004 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.0657622 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 37 components and 0.0657622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056755Jy  sigma=1.357230
! Fit after  self-cal, rms=0.056754Jy  sigma=1.357170
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056754Jy  sigma=1.357170
! Fit after  self-cal, rms=0.056686Jy  sigma=1.357138
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=1.28 mas, bpa=-0.4475 degrees
! Estimated noise=0.188222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266023 Jy
! Component: 100  -  total flux cleaned = 0.000250634 Jy
! Component: 150  -  total flux cleaned = 0.000237034 Jy
! Component: 200  -  total flux cleaned = 0.000224615 Jy
! Total flux subtracted in 200 components = 0.000224615 Jy
! Clean residual min=-0.001035 max=0.000957 Jy/beam
! Clean residual mean=0.000003 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0659868 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.0659868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056679Jy  sigma=1.356973
! Fit after  self-cal, rms=0.056679Jy  sigma=1.356960
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.76638e-05 Jy
! Component: 100  -  total flux cleaned = 6.34035e-06 Jy
! Component: 150  -  total flux cleaned = -4.15686e-06 Jy
! Component: 200  -  total flux cleaned = -3.99935e-06 Jy
! Total flux subtracted in 200 components = -3.99935e-06 Jy
! Clean residual min=-0.001024 max=0.000949 Jy/beam
! Clean residual mean=0.000003 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0659828 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 45 components and 0.0659828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056675Jy  sigma=1.356879
! Fit after  self-cal, rms=0.056675Jy  sigma=1.356875
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056675Jy  sigma=1.356875
! Fit after  self-cal, rms=0.056645Jy  sigma=1.356862
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.256 mas, bmaj=2.462 mas, bpa=29.44 degrees
! Estimated noise=0.235584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362283 Jy
! Component: 100  -  total flux cleaned = 0.000338164 Jy
! Component: 150  -  total flux cleaned = 0.000295361 Jy
! Component: 200  -  total flux cleaned = 0.000276383 Jy
! Total flux subtracted in 200 components = 0.000276383 Jy
! Clean residual min=-0.000981 max=0.001029 Jy/beam
! Clean residual mean=0.000007 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.0662592 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 53 components and 0.0662592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056645Jy  sigma=1.356852
! Fit after  self-cal, rms=0.056644Jy  sigma=1.356826
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.58414e-05 Jy
! Component: 100  -  total flux cleaned = 8.7008e-05 Jy
! Component: 150  -  total flux cleaned = 7.85103e-05 Jy
! Component: 200  -  total flux cleaned = 7.83639e-05 Jy
! Total flux subtracted in 200 components = 7.83639e-05 Jy
! Clean residual min=-0.000979 max=0.001004 Jy/beam
! Clean residual mean=0.000007 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0663375 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.0663375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056646Jy  sigma=1.356859
! Fit after  self-cal, rms=0.056646Jy  sigma=1.356845
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=1.28 mas, bpa=-0.1005 degrees
! Estimated noise=0.188132 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 1.28 at -0.1005 degrees (North through East)
! Clean map  min=-0.00088943  max=0.059681 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8044 mas, bmaj=0.9727 mas, bpa=-10.6 degrees
! Estimated noise=0.458571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0445956 Jy
! Component: 100  -  total flux cleaned = 0.0555444 Jy
! Component: 150  -  total flux cleaned = 0.0600133 Jy
! Component: 200  -  total flux cleaned = 0.0623697 Jy
! Total flux subtracted in 200 components = 0.0623697 Jy
! Clean residual min=-0.003042 max=0.002893 Jy/beam
! Clean residual mean=0.000003 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0623697 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0623697 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=1.28 mas, bpa=-0.1005 degrees
! Estimated noise=0.188132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257222 Jy
! Component: 100  -  total flux cleaned = 0.00384062 Jy
! Component: 150  -  total flux cleaned = 0.00436879 Jy
! Component: 200  -  total flux cleaned = 0.00454119 Jy
! Total flux subtracted in 200 components = 0.00454119 Jy
! Clean residual min=-0.001049 max=0.001042 Jy/beam
! Clean residual mean=0.000002 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0669109 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 0.0669109 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.256 mas, bmaj=2.462 mas, bpa=29.44 degrees
! Estimated noise=0.235584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172249 Jy
! Component: 100  -  total flux cleaned = 0.000173383 Jy
! Component: 150  -  total flux cleaned = 0.000109637 Jy
! Component: 200  -  total flux cleaned = 8.28665e-05 Jy
! Total flux subtracted in 200 components = 8.28665e-05 Jy
! Clean residual min=-0.000974 max=0.001103 Jy/beam
! Clean residual mean=0.000004 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0669938 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.43149e-05 Jy
! Component: 100  -  total flux cleaned = -4.67228e-05 Jy
! Component: 150  -  total flux cleaned = -6.68567e-05 Jy
! Component: 200  -  total flux cleaned = -6.68601e-05 Jy
! Total flux subtracted in 200 components = -6.68601e-05 Jy
! Clean residual min=-0.000957 max=0.001072 Jy/beam
! Clean residual mean=0.000004 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.0669269 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 53 components and 0.0669269 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=1.28 mas, bpa=-0.1005 degrees
! Estimated noise=0.188132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.63794e-05 Jy
! Component: 100  -  total flux cleaned = -0.00012751 Jy
! Component: 150  -  total flux cleaned = -0.000146187 Jy
! Component: 200  -  total flux cleaned = -0.000146664 Jy
! Total flux subtracted in 200 components = -0.000146664 Jy
! Clean residual min=-0.000943 max=0.001014 Jy/beam
! Clean residual mean=0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0667803 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 0.0667803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056642Jy  sigma=1.356730
! Fit after  self-cal, rms=0.056639Jy  sigma=1.356637
wmodel /J0927+5717_X_map.mod
! wmodel: Unable to open new model file: /J0927+5717_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0927+5717_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 1.28 at -0.1005 degrees (North through East)
! Clean map  min=-0.00083434  max=0.059439 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0927+5717_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0594395 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000226561 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.14349 1.14349 2.28697 4.57394 9.14789 18.2958 36.5916 73.1831
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.059 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  262.355 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0927+5717_X_dfm.log closed on Thu May 19 22:17:24 2016