! Started logfile: /scr/pima/bg219h_uvs/J0927+5717_S_dfm.log on Thu May 19 22:17:17 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219h_uvs/J0927+5717_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J0927+5717_S_uva.fits ! AN table 1: 52 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77094 visibilities/baseline/integration-bin. ! Found source: J0927+5717 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7216 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0927+5717_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005254Jy sigma=25.309207 ! Fit after self-cal, rms=0.916358Jy sigma=23.071946 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=3.835 mas, bpa=-10.18 degrees ! Estimated noise=0.557328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0657416 Jy ! Component: 100 - total flux cleaned = 0.0801878 Jy ! Total flux subtracted in 100 components = 0.0801878 Jy ! Clean residual min=-0.003345 max=0.004105 Jy/beam ! Clean residual mean=-0.000004 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0801878 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0801878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056223Jy sigma=1.340155 ! Fit after self-cal, rms=0.056100Jy sigma=1.337851 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=4.589 mas, bpa=-6.925 degrees ! Estimated noise=0.371894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478436 Jy ! Component: 100 - total flux cleaned = 0.00682197 Jy ! Component: 150 - total flux cleaned = 0.00788513 Jy ! Component: 200 - total flux cleaned = 0.00847387 Jy ! Total flux subtracted in 200 components = 0.00847387 Jy ! Clean residual min=-0.001943 max=0.001786 Jy/beam ! Clean residual mean=-0.000008 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0886617 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 18 components and 0.0886617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055729Jy sigma=1.328352 ! Fit after self-cal, rms=0.055727Jy sigma=1.328143 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.869 x 4.589 at -6.925 degrees (North through East) ! Clean map min=-0.0018503 max=0.084945 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00 KP 0.96 ! LA 0.98 MK 1.01 NL 1.00 OV 1.00 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.01 KP 0.96 ! LA 0.99 MK 1.02 NL 0.97 OV 1.01 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.98 KP 1.03 ! LA 0.99 MK 1.05 NL 0.93 OV 1.02 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.99 KP 1.02 ! LA 0.94 MK 0.99 NL 0.98 OV 1.03 ! PT 1.04 SC 0.95 ! ! ! Fit before self-cal, rms=0.055727Jy sigma=1.328143 ! Fit after self-cal, rms=0.055610Jy sigma=1.325620 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=4.598 mas, bpa=-6.767 degrees ! Estimated noise=0.372331 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335173 Jy ! Component: 100 - total flux cleaned = 0.000373709 Jy ! Component: 150 - total flux cleaned = 0.000383576 Jy ! Component: 200 - total flux cleaned = 0.000392471 Jy ! Total flux subtracted in 200 components = 0.000392471 Jy ! Clean residual min=-0.001940 max=0.001691 Jy/beam ! Clean residual mean=-0.000009 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0890542 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0890541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055604Jy sigma=1.325466 ! Fit after self-cal, rms=0.055612Jy sigma=1.325353 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055612Jy sigma=1.325353 ! Fit after self-cal, rms=0.055532Jy sigma=1.322333 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.867 mas, bmaj=4.597 mas, bpa=-7.219 degrees ! Estimated noise=0.372547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167246 Jy ! Component: 100 - total flux cleaned = 0.00018761 Jy ! Component: 150 - total flux cleaned = 0.000170771 Jy ! Component: 200 - total flux cleaned = 0.000163552 Jy ! Total flux subtracted in 200 components = 0.000163552 Jy ! Clean residual min=-0.001925 max=0.001661 Jy/beam ! Clean residual mean=-0.000007 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0892177 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0892177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055529Jy sigma=1.322234 ! Fit after self-cal, rms=0.055537Jy sigma=1.322135 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.22556e-05 Jy ! Component: 100 - total flux cleaned = 3.74464e-05 Jy ! Component: 150 - total flux cleaned = 3.08658e-05 Jy ! Component: 200 - total flux cleaned = 3.06673e-05 Jy ! Total flux subtracted in 200 components = 3.06673e-05 Jy ! Clean residual min=-0.001918 max=0.001657 Jy/beam ! Clean residual mean=-0.000007 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0892484 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0892484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055535Jy sigma=1.322078 ! Fit after self-cal, rms=0.055535Jy sigma=1.322068 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055535Jy sigma=1.322068 ! Fit after self-cal, rms=0.055578Jy sigma=1.322057 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=4.597 mas, bpa=-7.427 degrees ! Estimated noise=0.372831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140681 Jy ! Component: 100 - total flux cleaned = 0.000147816 Jy ! Component: 150 - total flux cleaned = 0.000165574 Jy ! Component: 200 - total flux cleaned = 0.00018201 Jy ! Total flux subtracted in 200 components = 0.00018201 Jy ! Clean residual min=-0.001920 max=0.001667 Jy/beam ! Clean residual mean=-0.000007 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0894304 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0894304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055576Jy sigma=1.322012 ! Fit after self-cal, rms=0.055576Jy sigma=1.322008 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.93813e-07 Jy ! Component: 100 - total flux cleaned = 9.95793e-06 Jy ! Component: 150 - total flux cleaned = 2.4646e-05 Jy ! Component: 200 - total flux cleaned = 3.37539e-05 Jy ! Total flux subtracted in 200 components = 3.37539e-05 Jy ! Clean residual min=-0.001918 max=0.001667 Jy/beam ! Clean residual mean=-0.000007 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0894641 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0894641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055575Jy sigma=1.321978 ! Fit after self-cal, rms=0.055575Jy sigma=1.321976 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055575Jy sigma=1.321976 ! Fit after self-cal, rms=0.055621Jy sigma=1.321969 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.525 mas, bmaj=8.252 mas, bpa=17 degrees ! Estimated noise=0.472854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178915 Jy ! Component: 100 - total flux cleaned = 0.00017563 Jy ! Component: 150 - total flux cleaned = 0.000172399 Jy ! Component: 200 - total flux cleaned = 0.000169164 Jy ! Total flux subtracted in 200 components = 0.000169164 Jy ! Clean residual min=-0.002047 max=0.001904 Jy/beam ! Clean residual mean=-0.000016 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0896333 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.0896333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055621Jy sigma=1.321964 ! Fit after self-cal, rms=0.055622Jy sigma=1.321958 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.50582e-06 Jy ! Component: 100 - total flux cleaned = 3.25209e-06 Jy ! Component: 150 - total flux cleaned = -5.94173e-06 Jy ! Component: 200 - total flux cleaned = -1.17747e-05 Jy ! Total flux subtracted in 200 components = -1.17747e-05 Jy ! Clean residual min=-0.002048 max=0.001901 Jy/beam ! Clean residual mean=-0.000016 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0896215 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 35 components and 0.0896215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055622Jy sigma=1.321961 ! Fit after self-cal, rms=0.055622Jy sigma=1.321956 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=4.596 mas, bpa=-7.647 degrees ! Estimated noise=0.373144 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 4.596 at -7.647 degrees (North through East) ! Clean map min=-0.0018743 max=0.085126 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=3.832 mas, bpa=-10.65 degrees ! Estimated noise=0.559961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660779 Jy ! Component: 100 - total flux cleaned = 0.080617 Jy ! Component: 150 - total flux cleaned = 0.0851559 Jy ! Component: 200 - total flux cleaned = 0.087679 Jy ! Total flux subtracted in 200 components = 0.087679 Jy ! Clean residual min=-0.002954 max=0.002642 Jy/beam ! Clean residual mean=-0.000003 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.087679 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.087679 Jy ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=4.596 mas, bpa=-7.647 degrees ! Estimated noise=0.373144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148227 Jy ! Component: 100 - total flux cleaned = 0.00169146 Jy ! Component: 150 - total flux cleaned = 0.0018186 Jy ! Component: 200 - total flux cleaned = 0.00191127 Jy ! Total flux subtracted in 200 components = 0.00191127 Jy ! Clean residual min=-0.001951 max=0.001663 Jy/beam ! Clean residual mean=-0.000006 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0895903 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.0895903 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.525 mas, bmaj=8.252 mas, bpa=17 degrees ! Estimated noise=0.472854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108147 Jy ! Component: 100 - total flux cleaned = 9.22717e-05 Jy ! Component: 150 - total flux cleaned = 7.14558e-05 Jy ! Component: 200 - total flux cleaned = 5.89624e-05 Jy ! Total flux subtracted in 200 components = 5.89624e-05 Jy ! Clean residual min=-0.002058 max=0.001908 Jy/beam ! Clean residual mean=-0.000016 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0896492 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.67703e-05 Jy ! Component: 100 - total flux cleaned = -2.68874e-05 Jy ! Component: 150 - total flux cleaned = -4.09912e-05 Jy ! Component: 200 - total flux cleaned = -4.96949e-05 Jy ! Total flux subtracted in 200 components = -4.96949e-05 Jy ! Clean residual min=-0.002065 max=0.001906 Jy/beam ! Clean residual mean=-0.000016 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0895995 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0895995 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=4.596 mas, bpa=-7.647 degrees ! Estimated noise=0.373144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.6111e-05 Jy ! Component: 100 - total flux cleaned = -9.32835e-06 Jy ! Component: 150 - total flux cleaned = -4.16541e-05 Jy ! Component: 200 - total flux cleaned = -5.14628e-05 Jy ! Total flux subtracted in 200 components = -5.14628e-05 Jy ! Clean residual min=-0.001950 max=0.001674 Jy/beam ! Clean residual mean=-0.000007 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0895481 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0895481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055628Jy sigma=1.322072 ! Fit after self-cal, rms=0.055629Jy sigma=1.322058 wmodel /J0927+5717_S_map.mod ! wmodel: Unable to open new model file: /J0927+5717_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J0927+5717_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 4.596 at -7.647 degrees (North through East) ! Clean map min=-0.0018751 max=0.085021 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0927+5717_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0850209 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00041371 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.4598 1.4598 2.91959 5.83918 11.6784 23.3567 46.7135 93.4269 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.085 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 205.508 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J0927+5717_S_dfm.log closed on Thu May 19 22:17:20 2016