! Started logfile: /scr/pima/bg219h_uvs/J0902+5402_X_dfm.log on Thu May 19 22:16:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0902+5402_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0902+5402_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.928241 visibilities/baseline/integration-bin.
! Found source: J0902+5402
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24060 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0902+5402_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004724Jy  sigma=25.323450
! Fit after  self-cal, rms=0.919533Jy  sigma=23.140968
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8005 mas, bmaj=0.9726 mas, bpa=-9.73 degrees
! Estimated noise=0.422513 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0590167 Jy
! Component: 100  -  total flux cleaned = 0.0757603 Jy
! Total flux subtracted in 100 components = 0.0757603 Jy
! Clean residual min=-0.003559 max=0.007896 Jy/beam
! Clean residual mean=0.000011 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.0757603 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0757603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062101Jy  sigma=1.454024
! Fit after  self-cal, rms=0.061551Jy  sigma=1.439738
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00918938 Jy
! Component: 100  -  total flux cleaned = 0.0141686 Jy
! Total flux subtracted in 100 components = 0.0141686 Jy
! Clean residual min=-0.002865 max=0.003916 Jy/beam
! Clean residual mean=0.000003 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.0899288 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 8 components and 0.0899288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059752Jy  sigma=1.389071
! Fit after  self-cal, rms=0.059748Jy  sigma=1.388562
! Inverting map 
! Added new window around map position (1, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0039 Jy
! Component: 100  -  total flux cleaned = 0.00582964 Jy
! Total flux subtracted in 100 components = 0.00582964 Jy
! Clean residual min=-0.002762 max=0.002682 Jy/beam
! Clean residual mean=0.000000 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.0957585 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 12 components and 0.0957585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059458Jy  sigma=1.380776
! Fit after  self-cal, rms=0.059446Jy  sigma=1.380417
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=1.254 mas, bpa=-1.882 degrees
! Estimated noise=0.185823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176715 Jy
! Component: 100  -  total flux cleaned = 0.00220347 Jy
! Component: 150  -  total flux cleaned = 0.00223005 Jy
! Component: 200  -  total flux cleaned = 0.00223019 Jy
! Total flux subtracted in 200 components = 0.00223019 Jy
! Clean residual min=-0.001457 max=0.001815 Jy/beam
! Clean residual mean=0.000004 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0979887 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.0979887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059391Jy  sigma=1.379035
! Fit after  self-cal, rms=0.059385Jy  sigma=1.378914
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.059 x 1.254 at -1.882 degrees (North through East)
! Clean map  min=-0.001336  max=0.082045 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.95     KP        0.99     
!   LA        1.03     MK        1.05     NL        0.99     OV        1.00     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.93     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.00     OV        1.03     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.92     KP        1.01     
!   LA        1.01     MK        0.99     NL        1.01     OV        1.04     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.95     KP        1.03     
!   LA        0.97     MK        1.01     NL        1.05     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.96     KP        0.98     
!   LA        0.98     MK        0.98     NL        1.03     OV        1.04     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.95     KP        1.03     
!   LA        1.00     MK        0.98     NL        1.01     OV        1.00     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.88     KP        1.03     
!   LA        0.97     MK        1.07     NL        1.02     OV        1.01     
!   PT        1.02     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        1.01     
!   LA        0.96     MK        1.07     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.06     HN        0.89     KP        1.02     
!   LA        1.00     MK        1.00     NL        0.97     OV        1.03     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.92     KP        1.01     
!   LA        1.00     MK        1.06     NL        1.02     OV        0.98     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.91     KP        1.04     
!   LA        0.98     MK        1.06     NL        1.06     OV        1.01     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.87     KP        1.08     
!   LA        1.00     MK        0.95     NL        1.05     OV        1.04     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.059385Jy  sigma=1.378914
! Fit after  self-cal, rms=0.058110Jy  sigma=1.375124
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=1.251 mas, bpa=-1.715 degrees
! Estimated noise=0.184701 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163307 Jy
! Component: 100  -  total flux cleaned = 0.00245617 Jy
! Component: 150  -  total flux cleaned = 0.00258449 Jy
! Component: 200  -  total flux cleaned = 0.00264938 Jy
! Total flux subtracted in 200 components = 0.00264938 Jy
! Clean residual min=-0.001146 max=0.001257 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.100638 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 40 components and 0.100638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058063Jy  sigma=1.373778
! Fit after  self-cal, rms=0.058047Jy  sigma=1.373527
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058047Jy  sigma=1.373527
! Fit after  self-cal, rms=0.058132Jy  sigma=1.371898
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.248 mas, bpa=-1.662 degrees
! Estimated noise=0.184785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000744694 Jy
! Component: 100  -  total flux cleaned = 0.000952434 Jy
! Component: 150  -  total flux cleaned = 0.00103131 Jy
! Component: 200  -  total flux cleaned = 0.00107347 Jy
! Total flux subtracted in 200 components = 0.00107347 Jy
! Clean residual min=-0.001021 max=0.001182 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.101712 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 51 components and 0.101711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058120Jy  sigma=1.371591
! Fit after  self-cal, rms=0.058124Jy  sigma=1.371518
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000848844 Jy
! Component: 100  -  total flux cleaned = 0.000887757 Jy
! Component: 150  -  total flux cleaned = 0.000887631 Jy
! Component: 200  -  total flux cleaned = 0.000917954 Jy
! Total flux subtracted in 200 components = 0.000917954 Jy
! Clean residual min=-0.000980 max=0.001156 Jy/beam
! Clean residual mean=-0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.102629 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 69 components and 0.102629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058103Jy  sigma=1.371096
! Fit after  self-cal, rms=0.058102Jy  sigma=1.371041
! Inverting map 
! Added new window around map position (-45.6, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102379 Jy
! Component: 100  -  total flux cleaned = 0.00132815 Jy
! Component: 150  -  total flux cleaned = 0.00145285 Jy
! Component: 200  -  total flux cleaned = 0.00157925 Jy
! Total flux subtracted in 200 components = 0.00157925 Jy
! Clean residual min=-0.001029 max=0.001053 Jy/beam
! Clean residual mean=-0.000002 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.104209 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.104209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058079Jy  sigma=1.370539
! Fit after  self-cal, rms=0.058078Jy  sigma=1.370486
! Inverting map 
! Added new window around map position (3, 32.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000898952 Jy
! Component: 100  -  total flux cleaned = 0.00112608 Jy
! Component: 150  -  total flux cleaned = 0.00134998 Jy
! Component: 200  -  total flux cleaned = 0.00157687 Jy
! Total flux subtracted in 200 components = 0.00157687 Jy
! Clean residual min=-0.001008 max=0.000967 Jy/beam
! Clean residual mean=-0.000002 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.105786 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 0.105786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058058Jy  sigma=1.370005
! Fit after  self-cal, rms=0.058057Jy  sigma=1.369972
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058057Jy  sigma=1.369972
! Fit after  self-cal, rms=0.058010Jy  sigma=1.369819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.248 mas, bpa=-1.319 degrees
! Estimated noise=0.184868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000539788 Jy
! Component: 100  -  total flux cleaned = 0.000843728 Jy
! Component: 150  -  total flux cleaned = 0.000993499 Jy
! Component: 200  -  total flux cleaned = 0.00108926 Jy
! Total flux subtracted in 200 components = 0.00108926 Jy
! Clean residual min=-0.000902 max=0.000922 Jy/beam
! Clean residual mean=-0.000002 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.106875 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 97 components and 0.106875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058001Jy  sigma=1.369623
! Fit after  self-cal, rms=0.058001Jy  sigma=1.369614
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (36.2, -34).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000714835 Jy
! Component: 100  -  total flux cleaned = 0.000916029 Jy
! Component: 150  -  total flux cleaned = 0.00100523 Jy
! Component: 200  -  total flux cleaned = 0.00110007 Jy
! Total flux subtracted in 200 components = 0.00110007 Jy
! Clean residual min=-0.000863 max=0.000923 Jy/beam
! Clean residual mean=-0.000001 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.107975 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 110 components and 0.107975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057982Jy  sigma=1.369181
! Fit after  self-cal, rms=0.057982Jy  sigma=1.369160
! Inverting map 
! Added new window around map position (28.6, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000575812 Jy
! Component: 100  -  total flux cleaned = 0.000670451 Jy
! Component: 150  -  total flux cleaned = 0.000771285 Jy
! Component: 200  -  total flux cleaned = 0.000786835 Jy
! Total flux subtracted in 200 components = 0.000786835 Jy
! Clean residual min=-0.000929 max=0.000865 Jy/beam
! Clean residual mean=-0.000001 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.108762 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 126 components and 0.108762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057967Jy  sigma=1.368765
! Fit after  self-cal, rms=0.057966Jy  sigma=1.368725
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057966Jy  sigma=1.368725
! Fit after  self-cal, rms=0.057929Jy  sigma=1.368685
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.227 mas, bmaj=2.409 mas, bpa=19.98 degrees
! Estimated noise=0.234347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308916 Jy
! Component: 100  -  total flux cleaned = 0.000430219 Jy
! Component: 150  -  total flux cleaned = 0.000510528 Jy
! Component: 200  -  total flux cleaned = 0.000583163 Jy
! Total flux subtracted in 200 components = 0.000583163 Jy
! Clean residual min=-0.000812 max=0.000787 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.109345 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 148 components and 0.109345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057928Jy  sigma=1.368635
! Fit after  self-cal, rms=0.057928Jy  sigma=1.368621
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179135 Jy
! Component: 100  -  total flux cleaned = 0.00023371 Jy
! Component: 150  -  total flux cleaned = 0.000293601 Jy
! Component: 200  -  total flux cleaned = 0.0003572 Jy
! Total flux subtracted in 200 components = 0.0003572 Jy
! Clean residual min=-0.000809 max=0.000806 Jy/beam
! Clean residual mean=-0.000001 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.109702 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 155 components and 0.109702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057928Jy  sigma=1.368614
! Fit after  self-cal, rms=0.057927Jy  sigma=1.368609
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.248 mas, bpa=-1.337 degrees
! Estimated noise=0.18484 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.055 x 1.248 at -1.337 degrees (North through East)
! Clean map  min=-0.00077192  max=0.08142 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8013 mas, bmaj=0.9685 mas, bpa=-8.885 degrees
! Estimated noise=0.418351 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0586021 Jy
! Component: 100  -  total flux cleaned = 0.0760604 Jy
! Component: 150  -  total flux cleaned = 0.0853226 Jy
! Component: 200  -  total flux cleaned = 0.0904755 Jy
! Total flux subtracted in 200 components = 0.0904755 Jy
! Clean residual min=-0.002423 max=0.002599 Jy/beam
! Clean residual mean=0.000004 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.0904755 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0904755 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.248 mas, bpa=-1.337 degrees
! Estimated noise=0.18484 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455106 Jy
! Component: 100  -  total flux cleaned = 0.00728209 Jy
! Component: 150  -  total flux cleaned = 0.00929761 Jy
! Component: 200  -  total flux cleaned = 0.0108861 Jy
! Total flux subtracted in 200 components = 0.0108861 Jy
! Clean residual min=-0.001109 max=0.001258 Jy/beam
! Clean residual mean=0.000002 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.101362 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 42 components and 0.101362 Jy
! Inverting map 
! Added new window around map position (44, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140386 Jy
! Component: 100  -  total flux cleaned = 0.00255559 Jy
! Component: 150  -  total flux cleaned = 0.00345372 Jy
! Component: 200  -  total flux cleaned = 0.00426065 Jy
! Total flux subtracted in 200 components = 0.00426065 Jy
! Clean residual min=-0.000985 max=0.000943 Jy/beam
! Clean residual mean=0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.105622 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 62 components and 0.105622 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.227 mas, bmaj=2.409 mas, bpa=19.98 degrees
! Estimated noise=0.234347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110708 Jy
! Component: 100  -  total flux cleaned = 0.00193633 Jy
! Component: 150  -  total flux cleaned = 0.00248371 Jy
! Component: 200  -  total flux cleaned = 0.00286301 Jy
! Total flux subtracted in 200 components = 0.00286301 Jy
! Clean residual min=-0.000939 max=0.000886 Jy/beam
! Clean residual mean=-0.000003 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.108485 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000272679 Jy
! Component: 100  -  total flux cleaned = 0.000535539 Jy
! Component: 150  -  total flux cleaned = 0.00072175 Jy
! Component: 200  -  total flux cleaned = 0.000861026 Jy
! Total flux subtracted in 200 components = 0.000861026 Jy
! Clean residual min=-0.000905 max=0.000822 Jy/beam
! Clean residual mean=-0.000003 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.109346 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 109 components and 0.109346 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.248 mas, bpa=-1.337 degrees
! Estimated noise=0.18484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000246192 Jy
! Component: 100  -  total flux cleaned = 0.000413573 Jy
! Component: 150  -  total flux cleaned = 0.000522442 Jy
! Component: 200  -  total flux cleaned = 0.000582441 Jy
! Total flux subtracted in 200 components = 0.000582441 Jy
! Clean residual min=-0.000888 max=0.000915 Jy/beam
! Clean residual mean=-0.000001 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.109929 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 127 components and 0.109929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057954Jy  sigma=1.369232
! Fit after  self-cal, rms=0.057951Jy  sigma=1.369175
wmodel /J0902+5402_X_map.mod
! wmodel: Unable to open new model file: /J0902+5402_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0902+5402_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.055 x 1.248 at -1.337 degrees (North through East)
! Clean map  min=-0.00078872  max=0.080995 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0902+5402_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0809952 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000202807 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.751183 0.751183 1.50237 3.00473 6.00946 12.0189 24.0379 48.0757 96.1514
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.08 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  399.37 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0902+5402_X_dfm.log closed on Thu May 19 22:16:46 2016