! Started logfile: /scr/pima/bg219h_uvs/J0902+5402_S_dfm.log on Thu May 19 22:16:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J0902+5402_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0902+5402_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.831019 visibilities/baseline/integration-bin.
! Found source: J0902+5402
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7180 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0902+5402_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019564Jy  sigma=25.626452
! Fit after  self-cal, rms=0.858910Jy  sigma=21.538112
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=3.756 mas, bpa=-14.75 degrees
! Estimated noise=0.592865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106504 Jy
! Component: 100  -  total flux cleaned = 0.131466 Jy
! Total flux subtracted in 100 components = 0.131466 Jy
! Clean residual min=-0.005615 max=0.009890 Jy/beam
! Clean residual mean=0.000001 rms=0.001396 Jy/beam
! Combined flux in latest and established models = 0.131466 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.131466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060937Jy  sigma=1.452500
! Fit after  self-cal, rms=0.060932Jy  sigma=1.451952
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111759 Jy
! Component: 100  -  total flux cleaned = 0.0171415 Jy
! Total flux subtracted in 100 components = 0.0171415 Jy
! Clean residual min=-0.004379 max=0.008840 Jy/beam
! Clean residual mean=0.000003 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.148608 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.148608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058022Jy  sigma=1.371614
! Fit after  self-cal, rms=0.058011Jy  sigma=1.371007
! Inverting map 
! Added new window around map position (6.5, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00754517 Jy
! Component: 100  -  total flux cleaned = 0.0114372 Jy
! Total flux subtracted in 100 components = 0.0114372 Jy
! Clean residual min=-0.003627 max=0.004221 Jy/beam
! Clean residual mean=0.000005 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.160045 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.160045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056879Jy  sigma=1.341325
! Fit after  self-cal, rms=0.056805Jy  sigma=1.338268
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.757 mas, bmaj=4.513 mas, bpa=-7.514 degrees
! Estimated noise=0.361323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00456679 Jy
! Component: 100  -  total flux cleaned = 0.00718867 Jy
! Component: 150  -  total flux cleaned = 0.00878423 Jy
! Component: 200  -  total flux cleaned = 0.00967214 Jy
! Total flux subtracted in 200 components = 0.00967214 Jy
! Clean residual min=-0.002000 max=0.002236 Jy/beam
! Clean residual mean=0.000015 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.169717 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.169717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056433Jy  sigma=1.328364
! Fit after  self-cal, rms=0.056421Jy  sigma=1.327633
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.757 x 4.513 at -7.514 degrees (North through East)
! Clean map  min=-0.0019662  max=0.14158 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        1.01     KP        1.01     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00*    HN        1.00     KP        0.97     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.98     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00*    HN        1.00     KP        1.00     
!   LA        1.01     MK        1.02     NL        0.92     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        1.02     KP        1.01     
!   LA        0.99     MK        1.04     NL        1.00     OV        1.02     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.056421Jy  sigma=1.327633
! Fit after  self-cal, rms=0.056090Jy  sigma=1.322917
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.768 mas, bmaj=4.522 mas, bpa=-6.92 degrees
! Estimated noise=0.36038 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000557334 Jy
! Component: 100  -  total flux cleaned = 0.000368376 Jy
! Component: 150  -  total flux cleaned = 0.000241736 Jy
! Component: 200  -  total flux cleaned = 0.0001379 Jy
! Total flux subtracted in 200 components = 0.0001379 Jy
! Clean residual min=-0.001845 max=0.002070 Jy/beam
! Clean residual mean=0.000018 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.169855 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.169855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056057Jy  sigma=1.322180
! Fit after  self-cal, rms=0.056061Jy  sigma=1.322074
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056061Jy  sigma=1.322074
! Fit after  self-cal, rms=0.055991Jy  sigma=1.318651
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=4.517 mas, bpa=-6.747 degrees
! Estimated noise=0.360271 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220759 Jy
! Component: 100  -  total flux cleaned = 0.000181656 Jy
! Component: 150  -  total flux cleaned = 0.000129926 Jy
! Component: 200  -  total flux cleaned = 6.70462e-05 Jy
! Total flux subtracted in 200 components = 6.70462e-05 Jy
! Clean residual min=-0.001808 max=0.001962 Jy/beam
! Clean residual mean=0.000009 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.169922 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 61 components and 0.169922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055977Jy  sigma=1.318355
! Fit after  self-cal, rms=0.055980Jy  sigma=1.318307
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-75.5, -70).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164276 Jy
! Component: 100  -  total flux cleaned = 0.00190186 Jy
! Component: 150  -  total flux cleaned = 0.00193614 Jy
! Component: 200  -  total flux cleaned = 0.0018535 Jy
! Total flux subtracted in 200 components = 0.0018535 Jy
! Clean residual min=-0.001609 max=0.001816 Jy/beam
! Clean residual mean=0.000009 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.171776 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 76 components and 0.171776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055910Jy  sigma=1.316661
! Fit after  self-cal, rms=0.055905Jy  sigma=1.316578
! Inverting map 
! Added new window around map position (-120.5, 68).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001469 Jy
! Component: 100  -  total flux cleaned = 0.00159944 Jy
! Component: 150  -  total flux cleaned = 0.00174087 Jy
! Component: 200  -  total flux cleaned = 0.00186679 Jy
! Total flux subtracted in 200 components = 0.00186679 Jy
! Clean residual min=-0.001656 max=0.001726 Jy/beam
! Clean residual mean=0.000008 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.173642 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 93 components and 0.173642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055853Jy  sigma=1.315304
! Fit after  self-cal, rms=0.055849Jy  sigma=1.315243
! Inverting map 
! Added new window around map position (-52.5, -112).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132426 Jy
! Component: 100  -  total flux cleaned = 0.0016485 Jy
! Component: 150  -  total flux cleaned = 0.00194955 Jy
! Component: 200  -  total flux cleaned = 0.00214121 Jy
! Total flux subtracted in 200 components = 0.00214121 Jy
! Clean residual min=-0.001528 max=0.001551 Jy/beam
! Clean residual mean=0.000004 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.175784 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 112 components and 0.175784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055795Jy  sigma=1.313940
! Fit after  self-cal, rms=0.055794Jy  sigma=1.313862
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055794Jy  sigma=1.313862
! Fit after  self-cal, rms=0.055698Jy  sigma=1.313562
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=4.513 mas, bpa=-6.757 degrees
! Estimated noise=0.359841 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000557616 Jy
! Component: 100  -  total flux cleaned = 0.000777337 Jy
! Component: 150  -  total flux cleaned = 0.000801981 Jy
! Component: 200  -  total flux cleaned = 0.000848647 Jy
! Total flux subtracted in 200 components = 0.000848647 Jy
! Clean residual min=-0.001516 max=0.001544 Jy/beam
! Clean residual mean=0.000004 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.176632 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 118 components and 0.176632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055672Jy  sigma=1.312986
! Fit after  self-cal, rms=0.055672Jy  sigma=1.312967
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-36, -17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000353762 Jy
! Component: 100  -  total flux cleaned = -2.47441e-06 Jy
! Component: 150  -  total flux cleaned = -0.000155368 Jy
! Component: 200  -  total flux cleaned = -0.000156918 Jy
! Total flux subtracted in 200 components = -0.000156918 Jy
! Clean residual min=-0.001426 max=0.001402 Jy/beam
! Clean residual mean=0.000004 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.176475 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 138 components and 0.176475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055620Jy  sigma=1.311864
! Fit after  self-cal, rms=0.055618Jy  sigma=1.311826
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055618Jy  sigma=1.311826
! Fit after  self-cal, rms=0.055605Jy  sigma=1.311774
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.445 mas, bmaj=8.287 mas, bpa=11.58 degrees
! Estimated noise=0.456268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00015813 Jy
! Component: 100  -  total flux cleaned = -0.000117368 Jy
! Component: 150  -  total flux cleaned = -0.000116751 Jy
! Component: 200  -  total flux cleaned = -0.000216544 Jy
! Total flux subtracted in 200 components = -0.000216544 Jy
! Clean residual min=-0.001427 max=0.001451 Jy/beam
! Clean residual mean=0.000008 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.176259 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 159 components and 0.176259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055596Jy  sigma=1.311597
! Fit after  self-cal, rms=0.055595Jy  sigma=1.311591
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.44479e-06 Jy
! Component: 100  -  total flux cleaned = -9.35132e-05 Jy
! Component: 150  -  total flux cleaned = -0.000194525 Jy
! Component: 200  -  total flux cleaned = -0.000290446 Jy
! Total flux subtracted in 200 components = -0.000290446 Jy
! Clean residual min=-0.001373 max=0.001438 Jy/beam
! Clean residual mean=0.000007 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.175968 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 167 components and 0.175968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055590Jy  sigma=1.311528
! Fit after  self-cal, rms=0.055589Jy  sigma=1.311523
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=4.511 mas, bpa=-6.668 degrees
! Estimated noise=0.359918 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.767 x 4.511 at -6.668 degrees (North through East)
! Clean map  min=-0.0012953  max=0.14115 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.063 mas, bmaj=3.75 mas, bpa=-14 degrees
! Estimated noise=0.593028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106365 Jy
! Component: 100  -  total flux cleaned = 0.131724 Jy
! Component: 150  -  total flux cleaned = 0.143953 Jy
! Component: 200  -  total flux cleaned = 0.151958 Jy
! Total flux subtracted in 200 components = 0.151958 Jy
! Clean residual min=-0.003602 max=0.004317 Jy/beam
! Clean residual mean=0.000003 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.151958 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.151958 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=4.511 mas, bpa=-6.668 degrees
! Estimated noise=0.359918 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768683 Jy
! Component: 100  -  total flux cleaned = 0.0119762 Jy
! Component: 150  -  total flux cleaned = 0.0149306 Jy
! Component: 200  -  total flux cleaned = 0.0171034 Jy
! Total flux subtracted in 200 components = 0.0171034 Jy
! Clean residual min=-0.002035 max=0.001753 Jy/beam
! Clean residual mean=0.000007 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.169062 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 40 components and 0.169062 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.445 mas, bmaj=8.287 mas, bpa=11.58 degrees
! Estimated noise=0.456268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185683 Jy
! Component: 100  -  total flux cleaned = 0.00288646 Jy
! Component: 150  -  total flux cleaned = 0.00370421 Jy
! Component: 200  -  total flux cleaned = 0.00419202 Jy
! Total flux subtracted in 200 components = 0.00419202 Jy
! Clean residual min=-0.001843 max=0.001614 Jy/beam
! Clean residual mean=0.000014 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.173254 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000366287 Jy
! Component: 100  -  total flux cleaned = 0.000765381 Jy
! Component: 150  -  total flux cleaned = 0.000978839 Jy
! Component: 200  -  total flux cleaned = 0.00117581 Jy
! Total flux subtracted in 200 components = 0.00117581 Jy
! Clean residual min=-0.001679 max=0.001476 Jy/beam
! Clean residual mean=0.000010 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.174429 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 89 components and 0.174429 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=4.511 mas, bpa=-6.668 degrees
! Estimated noise=0.359918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000947956 Jy
! Component: 100  -  total flux cleaned = 0.00141276 Jy
! Component: 150  -  total flux cleaned = 0.00182088 Jy
! Component: 200  -  total flux cleaned = 0.00182158 Jy
! Total flux subtracted in 200 components = 0.00182158 Jy
! Clean residual min=-0.001471 max=0.001581 Jy/beam
! Clean residual mean=0.000004 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.176251 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 111 components and 0.176251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055696Jy  sigma=1.314000
! Fit after  self-cal, rms=0.055693Jy  sigma=1.313784
wmodel /J0902+5402_S_map.mod
! wmodel: Unable to open new model file: /J0902+5402_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0902+5402_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.767 x 4.511 at -6.668 degrees (North through East)
! Clean map  min=-0.0013624  max=0.1412 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0902+5402_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.141205 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000366958 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.77963 0.77963 1.55926 3.11852 6.23704 12.4741 24.9482 49.8963 99.7927
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.141 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  384.797 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0902+5402_S_dfm.log closed on Thu May 19 22:16:40 2016