! Started logfile: /scr/pima/bg219h_uvs/J0844-3742_X_uvs.log on Thu Apr  7 12:05:08 2016
obs /scr/pima/bg219h_uvs/J0844-3742_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0844-3742_X_uva.fits
! AN table 1: 29 integrations on 28 of 28 possible baselines.
! AN table 2: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.904095 visibilities/baseline/integration-bin.
! Found source: J0844-3742
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20136 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0844-3742_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.018338Jy  sigma=19.540160
! Fit after  self-cal, rms=0.849554Jy  sigma=16.167287
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6841 mas, bmaj=2.105 mas, bpa=5.106 degrees
! Estimated noise=0.680753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117199 Jy
! Component: 100  -  total flux cleaned = 0.144501 Jy
! Total flux subtracted in 100 components = 0.144501 Jy
! Clean residual min=-0.009683 max=0.017024 Jy/beam
! Clean residual mean=-0.000006 rms=0.002177 Jy/beam
! Combined flux in latest and established models = 0.144501 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.144501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083913Jy  sigma=1.496989
! Fit after  self-cal, rms=0.083570Jy  sigma=1.488602
! Inverting map 
! Added new window around map position (-1.2, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151553 Jy
! Component: 100  -  total flux cleaned = 0.0238128 Jy
! Total flux subtracted in 100 components = 0.0238128 Jy
! Clean residual min=-0.007940 max=0.010306 Jy/beam
! Clean residual mean=-0.000000 rms=0.001610 Jy/beam
! Combined flux in latest and established models = 0.168314 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.168314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080176Jy  sigma=1.405496
! Fit after  self-cal, rms=0.080007Jy  sigma=1.401501
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8721 mas, bmaj=2.715 mas, bpa=3.219 degrees
! Estimated noise=0.354779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, 7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106653 Jy
! Component: 100  -  total flux cleaned = 0.0169383 Jy
! Component: 150  -  total flux cleaned = 0.0212692 Jy
! Component: 200  -  total flux cleaned = 0.0243919 Jy
! Total flux subtracted in 200 components = 0.0243919 Jy
! Clean residual min=-0.004224 max=0.005060 Jy/beam
! Clean residual mean=0.000012 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.192706 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 0.192706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078486Jy  sigma=1.367592
! Fit after  self-cal, rms=0.078450Jy  sigma=1.365513
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8721 x 2.715 at 3.219 degrees (North through East)
! Clean map  min=-0.003621  max=0.1451 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        1.01     KP        0.97     LA        0.95     
!   MK        0.99     NL        1.15     OV        0.93     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.11     KP        0.95     LA        0.99     
!   NL        1.05     OV        0.96     PT        1.01     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.17     KP        0.98     LA        1.00     
!   NL        1.09     OV        0.98     PT        1.01     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.99     KP        0.92     LA        1.00     
!   MK        0.98     NL        1.17     OV        0.93     PT        0.97     
!   SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.18     KP        0.98     LA        1.01     
!   NL        1.06     OV        0.96     PT        1.00     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.16     FD        0.98     KP        0.93     LA        0.99     
!   MK        1.02     NL        1.17     OV        0.94     PT        0.95     
!   SC        1.01     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     FD        0.97     KP        0.93     LA        1.00     
!   MK        0.95     NL        1.17     OV        0.97     PT        0.95     
!   SC        1.10     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        1.02     KP        0.99     LA        1.00     
!   NL        1.00     OV        0.97     PT        1.04     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.00     KP        0.96     LA        0.96     
!   MK        0.97     NL        1.12     OV        0.96     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.09     KP        0.99     LA        1.00     
!   NL        1.07     OV        0.96     PT        0.95     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        0.99     KP        0.96     LA        0.96     
!   MK        0.94     NL        1.15     OV        0.96     PT        0.98     
!   SC        0.98     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078450Jy  sigma=1.365513
! Fit after  self-cal, rms=0.080509Jy  sigma=1.350270
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8732 mas, bmaj=2.722 mas, bpa=3.069 degrees
! Estimated noise=0.353356 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267497 Jy
! Component: 100  -  total flux cleaned = 0.00341105 Jy
! Component: 150  -  total flux cleaned = 0.00345282 Jy
! Component: 200  -  total flux cleaned = 0.0035201 Jy
! Total flux subtracted in 200 components = 0.0035201 Jy
! Clean residual min=-0.002674 max=0.003586 Jy/beam
! Clean residual mean=0.000004 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.196226 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 63 components and 0.196226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080416Jy  sigma=1.348169
! Fit after  self-cal, rms=0.080497Jy  sigma=1.347819
! Inverting map 
! Added new window around map position (1.4, 13.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00352219 Jy
! Component: 100  -  total flux cleaned = 0.00523607 Jy
! Component: 150  -  total flux cleaned = 0.00593824 Jy
! Component: 200  -  total flux cleaned = 0.00628547 Jy
! Total flux subtracted in 200 components = 0.00628547 Jy
! Clean residual min=-0.002318 max=0.002234 Jy/beam
! Clean residual mean=0.000000 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.202511 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 95 components and 0.202511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080336Jy  sigma=1.344627
! Fit after  self-cal, rms=0.080330Jy  sigma=1.344283
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080330Jy  sigma=1.344283
! Fit after  self-cal, rms=0.080082Jy  sigma=1.344118
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8712 mas, bmaj=2.715 mas, bpa=3.095 degrees
! Estimated noise=0.352237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123301 Jy
! Component: 100  -  total flux cleaned = 0.00168702 Jy
! Component: 150  -  total flux cleaned = 0.00184568 Jy
! Component: 200  -  total flux cleaned = 0.00193177 Jy
! Total flux subtracted in 200 components = 0.00193177 Jy
! Clean residual min=-0.002292 max=0.002159 Jy/beam
! Clean residual mean=0.000000 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.204443 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 109 components and 0.204443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080045Jy  sigma=1.343513
! Fit after  self-cal, rms=0.080048Jy  sigma=1.343440
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443767 Jy
! Component: 100  -  total flux cleaned = 0.000581287 Jy
! Component: 150  -  total flux cleaned = 0.000631149 Jy
! Component: 200  -  total flux cleaned = 0.00067867 Jy
! Total flux subtracted in 200 components = 0.00067867 Jy
! Clean residual min=-0.002245 max=0.002139 Jy/beam
! Clean residual mean=-0.000000 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.205122 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 121 components and 0.205122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080029Jy  sigma=1.343122
! Fit after  self-cal, rms=0.080031Jy  sigma=1.343092
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080031Jy  sigma=1.343092
! Fit after  self-cal, rms=0.080356Jy  sigma=1.342484
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8705 mas, bmaj=2.713 mas, bpa=3.145 degrees
! Estimated noise=0.352237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00050034 Jy
! Component: 100  -  total flux cleaned = 0.000596679 Jy
! Component: 150  -  total flux cleaned = 0.000639167 Jy
! Component: 200  -  total flux cleaned = 0.000618789 Jy
! Total flux subtracted in 200 components = 0.000618789 Jy
! Clean residual min=-0.002185 max=0.002070 Jy/beam
! Clean residual mean=0.000001 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.20574 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 130 components and 0.20574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080342Jy  sigma=1.342256
! Fit after  self-cal, rms=0.080349Jy  sigma=1.342231
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258191 Jy
! Component: 100  -  total flux cleaned = 0.000257601 Jy
! Component: 150  -  total flux cleaned = 0.000275415 Jy
! Component: 200  -  total flux cleaned = 0.000292738 Jy
! Total flux subtracted in 200 components = 0.000292738 Jy
! Clean residual min=-0.002177 max=0.002067 Jy/beam
! Clean residual mean=0.000001 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.206033 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 139 components and 0.206033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080340Jy  sigma=1.342076
! Fit after  self-cal, rms=0.080342Jy  sigma=1.342065
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080342Jy  sigma=1.342065
! Fit after  self-cal, rms=0.080367Jy  sigma=1.342050
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.378 mas, bmaj=7.723 mas, bpa=1.843 degrees
! Estimated noise=0.432828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000580876 Jy
! Component: 100  -  total flux cleaned = 0.000741559 Jy
! Component: 150  -  total flux cleaned = 0.000874826 Jy
! Component: 200  -  total flux cleaned = 0.000914326 Jy
! Total flux subtracted in 200 components = 0.000914326 Jy
! Clean residual min=-0.002951 max=0.002695 Jy/beam
! Clean residual mean=0.000004 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.206948 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 148 components and 0.206948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080364Jy  sigma=1.341973
! Fit after  self-cal, rms=0.080363Jy  sigma=1.341957
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158108 Jy
! Component: 100  -  total flux cleaned = 0.000158537 Jy
! Component: 150  -  total flux cleaned = 0.000170336 Jy
! Component: 200  -  total flux cleaned = 0.000192283 Jy
! Total flux subtracted in 200 components = 0.000192283 Jy
! Clean residual min=-0.002917 max=0.002658 Jy/beam
! Clean residual mean=0.000004 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 0.20714 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 150 components and 0.20714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080361Jy  sigma=1.341914
! Fit after  self-cal, rms=0.080361Jy  sigma=1.341911
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8703 mas, bmaj=2.712 mas, bpa=3.177 degrees
! Estimated noise=0.352212 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8703 x 2.712 at 3.177 degrees (North through East)
! Clean map  min=-0.0020495  max=0.14419 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.681 mas, bmaj=2.104 mas, bpa=5.026 degrees
! Estimated noise=0.676849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116464 Jy
! Component: 100  -  total flux cleaned = 0.145045 Jy
! Component: 150  -  total flux cleaned = 0.158531 Jy
! Component: 200  -  total flux cleaned = 0.167173 Jy
! Total flux subtracted in 200 components = 0.167173 Jy
! Clean residual min=-0.005682 max=0.005469 Jy/beam
! Clean residual mean=-0.000000 rms=0.001276 Jy/beam
! Combined flux in latest and established models = 0.167173 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.167173 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8703 mas, bmaj=2.712 mas, bpa=3.177 degrees
! Estimated noise=0.352212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00968975 Jy
! Component: 100  -  total flux cleaned = 0.0161877 Jy
! Component: 150  -  total flux cleaned = 0.0208255 Jy
! Component: 200  -  total flux cleaned = 0.0242753 Jy
! Total flux subtracted in 200 components = 0.0242753 Jy
! Clean residual min=-0.002588 max=0.002925 Jy/beam
! Clean residual mean=0.000007 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.191448 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 73 components and 0.191448 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.378 mas, bmaj=7.723 mas, bpa=1.843 degrees
! Estimated noise=0.432828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00439305 Jy
! Component: 100  -  total flux cleaned = 0.0074117 Jy
! Component: 150  -  total flux cleaned = 0.00956364 Jy
! Component: 200  -  total flux cleaned = 0.0111202 Jy
! Total flux subtracted in 200 components = 0.0111202 Jy
! Clean residual min=-0.003071 max=0.002407 Jy/beam
! Clean residual mean=0.000008 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.202569 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113488 Jy
! Component: 100  -  total flux cleaned = 0.0019668 Jy
! Component: 150  -  total flux cleaned = 0.00257815 Jy
! Component: 200  -  total flux cleaned = 0.00277569 Jy
! Total flux subtracted in 200 components = 0.00277569 Jy
! Clean residual min=-0.002929 max=0.002628 Jy/beam
! Clean residual mean=0.000006 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.205344 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 110 components and 0.205344 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8703 mas, bmaj=2.712 mas, bpa=3.177 degrees
! Estimated noise=0.352212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.03536e-05 Jy
! Component: 100  -  total flux cleaned = 8.37027e-05 Jy
! Component: 150  -  total flux cleaned = 0.000116169 Jy
! Component: 200  -  total flux cleaned = 0.000115688 Jy
! Total flux subtracted in 200 components = 0.000115688 Jy
! Clean residual min=-0.002292 max=0.002024 Jy/beam
! Clean residual mean=0.000002 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.20546 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 128 components and 0.20546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080412Jy  sigma=1.342773
! Fit after  self-cal, rms=0.080393Jy  sigma=1.342569
wmodel /scr/pima/bg219h_uvs/J0844-3742_X_map.mod
! Writing 128 model components to file: /scr/pima/bg219h_uvs/J0844-3742_X_map.mod
wobs /scr/pima/bg219h_uvs/J0844-3742_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0844-3742_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J0844-3742_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219h_uvs/J0844-3742_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00078251 Jy
! Component: 100  -  total flux cleaned = -0.00071188 Jy
! Component: 150  -  total flux cleaned = -0.000540509 Jy
! Component: 200  -  total flux cleaned = -0.00044372 Jy
! Component: 250  -  total flux cleaned = -0.000226625 Jy
! Component: 300  -  total flux cleaned = -0.000137378 Jy
! Component: 350  -  total flux cleaned = -0.000107713 Jy
! Component: 400  -  total flux cleaned = -5.22205e-05 Jy
! Component: 450  -  total flux cleaned = -0.000132632 Jy
! Component: 500  -  total flux cleaned = -0.000132038 Jy
! Component: 550  -  total flux cleaned = -0.000156769 Jy
! Component: 600  -  total flux cleaned = -0.000230255 Jy
! Component: 650  -  total flux cleaned = -0.000325903 Jy
! Component: 700  -  total flux cleaned = -0.000396132 Jy
! Component: 750  -  total flux cleaned = -0.000441908 Jy
! Component: 800  -  total flux cleaned = -0.000442528 Jy
! Component: 850  -  total flux cleaned = -0.000507433 Jy
! Component: 900  -  total flux cleaned = -0.00054985 Jy
! Component: 950  -  total flux cleaned = -0.000612296 Jy
! Component: 1000  -  total flux cleaned = -0.000712885 Jy
! Component: 1050  -  total flux cleaned = -0.000653392 Jy
! Component: 1100  -  total flux cleaned = -0.000711335 Jy
! Component: 1150  -  total flux cleaned = -0.000672712 Jy
! Component: 1200  -  total flux cleaned = -0.000672741 Jy
! Component: 1250  -  total flux cleaned = -0.000672631 Jy
! Component: 1300  -  total flux cleaned = -0.000726939 Jy
! Component: 1350  -  total flux cleaned = -0.000744554 Jy
! Component: 1400  -  total flux cleaned = -0.000832122 Jy
! Component: 1450  -  total flux cleaned = -0.000900721 Jy
! Component: 1500  -  total flux cleaned = -0.000900964 Jy
! Component: 1550  -  total flux cleaned = -0.000951276 Jy
! Component: 1600  -  total flux cleaned = -0.000967965 Jy
! Component: 1650  -  total flux cleaned = -0.00100053 Jy
! Component: 1700  -  total flux cleaned = -0.00101659 Jy
! Component: 1750  -  total flux cleaned = -0.00101652 Jy
! Component: 1800  -  total flux cleaned = -0.00106358 Jy
! Component: 1850  -  total flux cleaned = -0.00107914 Jy
! Component: 1900  -  total flux cleaned = -0.00106404 Jy
! Component: 1950  -  total flux cleaned = -0.00110943 Jy
! Component: 2000  -  total flux cleaned = -0.00106459 Jy
! Component: 2050  -  total flux cleaned = -0.00112355 Jy
! Component: 2100  -  total flux cleaned = -0.0011235 Jy
! Component: 2150  -  total flux cleaned = -0.00109444 Jy
! Component: 2200  -  total flux cleaned = -0.00112298 Jy
! Component: 2250  -  total flux cleaned = -0.00113716 Jy
! Component: 2300  -  total flux cleaned = -0.00113711 Jy
! Component: 2350  -  total flux cleaned = -0.00116483 Jy
! Component: 2400  -  total flux cleaned = -0.00123342 Jy
! Component: 2450  -  total flux cleaned = -0.00126051 Jy
! Component: 2500  -  total flux cleaned = -0.00134116 Jy
! Component: 2550  -  total flux cleaned = -0.00134111 Jy
! Component: 2600  -  total flux cleaned = -0.00136759 Jy
! Component: 2650  -  total flux cleaned = -0.00143318 Jy
! Component: 2700  -  total flux cleaned = -0.00144614 Jy
! Component: 2750  -  total flux cleaned = -0.00147189 Jy
! Component: 2800  -  total flux cleaned = -0.00152288 Jy
! Component: 2850  -  total flux cleaned = -0.00156081 Jy
! Component: 2900  -  total flux cleaned = -0.00159841 Jy
! Component: 2950  -  total flux cleaned = -0.00162338 Jy
! Component: 3000  -  total flux cleaned = -0.0016481 Jy
! Component: 3050  -  total flux cleaned = -0.00172188 Jy
! Component: 3100  -  total flux cleaned = -0.00173403 Jy
! Component: 3150  -  total flux cleaned = -0.00177044 Jy
! Component: 3200  -  total flux cleaned = -0.00179456 Jy
! Component: 3250  -  total flux cleaned = -0.00180649 Jy
! Component: 3300  -  total flux cleaned = -0.00184229 Jy
! Component: 3350  -  total flux cleaned = -0.00185408 Jy
! Component: 3400  -  total flux cleaned = -0.00187769 Jy
! Component: 3450  -  total flux cleaned = -0.00194792 Jy
! Component: 3500  -  total flux cleaned = -0.00197118 Jy
! Component: 3550  -  total flux cleaned = -0.00201742 Jy
! Component: 3600  -  total flux cleaned = -0.00207491 Jy
! Component: 3650  -  total flux cleaned = -0.0021092 Jy
! Component: 3700  -  total flux cleaned = -0.0021547 Jy
! Component: 3750  -  total flux cleaned = -0.00215476 Jy
! Component: 3800  -  total flux cleaned = -0.00225604 Jy
! Component: 3850  -  total flux cleaned = -0.00228959 Jy
! Component: 3900  -  total flux cleaned = -0.00230078 Jy
! Component: 3950  -  total flux cleaned = -0.00235628 Jy
! Component: 4000  -  total flux cleaned = -0.00244449 Jy
! Component: 4050  -  total flux cleaned = -0.00252128 Jy
! Total flux subtracted in 4096 components = -0.00255398 Jy
! Clean residual min=-0.000646 max=0.000677 Jy/beam
! Clean residual mean=-0.000000 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.202906 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 407 components and 0.202906 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0844-3742_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8703 x 2.712 at 3.177 degrees (North through East)
! Clean map  min=-0.0012198  max=0.14558 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0844-3742_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.145577 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000184445 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.380097 0.380097 0.760194 1.52039 3.04077 6.08155 12.1631 24.3262 48.6524 97.3048
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.145 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  789.272 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0844-3742_X_uvs.log closed on Thu Apr  7 12:05:12 2016