! Started logfile: /scr/pima/bg219h_uvs/J0839+4227_X_dfm.log on Thu May 19 22:15:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0839+4227_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0839+4227_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.847531 visibilities/baseline/integration-bin.
! Found source: J0839+4227
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16476 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0839+4227_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011201Jy  sigma=24.993195
! Fit after  self-cal, rms=0.888922Jy  sigma=21.933225
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8318 mas, bmaj=1.062 mas, bpa=-9.904 degrees
! Estimated noise=0.495168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.085231 Jy
! Component: 100  -  total flux cleaned = 0.1048 Jy
! Total flux subtracted in 100 components = 0.1048 Jy
! Clean residual min=-0.004968 max=0.009015 Jy/beam
! Clean residual mean=0.000001 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.1048 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.1048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064691Jy  sigma=1.472093
! Fit after  self-cal, rms=0.064345Jy  sigma=1.463877
! Inverting map 
! Added new window around map position (1.2, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0093248 Jy
! Component: 100  -  total flux cleaned = 0.0148947 Jy
! Total flux subtracted in 100 components = 0.0148947 Jy
! Clean residual min=-0.004277 max=0.003993 Jy/beam
! Clean residual mean=0.000001 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.119694 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.119694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062599Jy  sigma=1.416270
! Fit after  self-cal, rms=0.062532Jy  sigma=1.414368
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.107 mas, bmaj=1.347 mas, bpa=1.721 degrees
! Estimated noise=0.249561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00571042 Jy
! Component: 100  -  total flux cleaned = 0.00859652 Jy
! Component: 150  -  total flux cleaned = 0.0102913 Jy
! Component: 200  -  total flux cleaned = 0.0113327 Jy
! Total flux subtracted in 200 components = 0.0113327 Jy
! Clean residual min=-0.002211 max=0.001905 Jy/beam
! Clean residual mean=-0.000001 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.131027 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 30 components and 0.131027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062033Jy  sigma=1.401050
! Fit after  self-cal, rms=0.062007Jy  sigma=1.400009
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.107 x 1.347 at 1.721 degrees (North through East)
! Clean map  min=-0.001809  max=0.11013 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        0.95     KP        1.00     
!   LA        1.00     MK        1.04     NL        0.99     OV        1.02     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.05     NL        1.03     OV        0.99     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.01     KP        1.01     
!   LA        0.98     MK        1.05     NL        0.99     OV        0.96     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.03     KP        0.97     
!   LA        0.96     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.00     KP        1.00     
!   LA        1.02     MK        1.00     NL        1.03     OV        1.00     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.96     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.02     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.97     KP        0.99     
!   LA        0.98     MK        1.09     NL        0.99     OV        0.97     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.97     KP        0.99     
!   LA        1.01     MK        1.05     NL        1.03     OV        0.97     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        0.96     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.03     OV        1.03     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.94     KP        0.96     
!   LA        0.97     MK        0.99     NL        0.99     OV        1.01     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        0.89     KP        0.97     
!   LA        0.97     MK        1.03     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.92     KP        1.03     
!   LA        1.02     MK        0.95     NL        0.99     OV        0.97     
!   PT        0.99     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.062007Jy  sigma=1.400009
! Fit after  self-cal, rms=0.061223Jy  sigma=1.395417
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=1.35 mas, bpa=2.014 degrees
! Estimated noise=0.248409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000655665 Jy
! Component: 100  -  total flux cleaned = 0.000624757 Jy
! Component: 150  -  total flux cleaned = 0.000560903 Jy
! Component: 200  -  total flux cleaned = 0.000508856 Jy
! Total flux subtracted in 200 components = 0.000508856 Jy
! Clean residual min=-0.001820 max=0.001666 Jy/beam
! Clean residual mean=-0.000005 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.131536 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.131536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061185Jy  sigma=1.394687
! Fit after  self-cal, rms=0.061178Jy  sigma=1.394436
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061178Jy  sigma=1.394436
! Fit after  self-cal, rms=0.061266Jy  sigma=1.390182
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=1.346 mas, bpa=1.837 degrees
! Estimated noise=0.248224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00039884 Jy
! Component: 100  -  total flux cleaned = 0.00044377 Jy
! Component: 150  -  total flux cleaned = 0.000427232 Jy
! Component: 200  -  total flux cleaned = 0.000385646 Jy
! Total flux subtracted in 200 components = 0.000385646 Jy
! Clean residual min=-0.001573 max=0.001752 Jy/beam
! Clean residual mean=-0.000004 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.131922 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.131922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061250Jy  sigma=1.389852
! Fit after  self-cal, rms=0.061257Jy  sigma=1.389700
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-31.8, 28).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139867 Jy
! Component: 100  -  total flux cleaned = 0.00207549 Jy
! Component: 150  -  total flux cleaned = 0.00242927 Jy
! Component: 200  -  total flux cleaned = 0.0026342 Jy
! Total flux subtracted in 200 components = 0.0026342 Jy
! Clean residual min=-0.001586 max=0.001619 Jy/beam
! Clean residual mean=-0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.134556 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 61 components and 0.134556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061219Jy  sigma=1.388738
! Fit after  self-cal, rms=0.061216Jy  sigma=1.388655
! Inverting map 
! Added new window around map position (12.8, 50.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136475 Jy
! Component: 100  -  total flux cleaned = 0.00176612 Jy
! Component: 150  -  total flux cleaned = 0.00207768 Jy
! Component: 200  -  total flux cleaned = 0.00224782 Jy
! Total flux subtracted in 200 components = 0.00224782 Jy
! Clean residual min=-0.001564 max=0.001420 Jy/beam
! Clean residual mean=-0.000002 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.136804 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 71 components and 0.136804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061179Jy  sigma=1.387769
! Fit after  self-cal, rms=0.061176Jy  sigma=1.387690
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061176Jy  sigma=1.387690
! Fit after  self-cal, rms=0.061153Jy  sigma=1.387534
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=1.346 mas, bpa=1.724 degrees
! Estimated noise=0.248014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000514167 Jy
! Component: 100  -  total flux cleaned = 0.000776326 Jy
! Component: 150  -  total flux cleaned = 0.000913497 Jy
! Component: 200  -  total flux cleaned = 0.000968408 Jy
! Total flux subtracted in 200 components = 0.000968408 Jy
! Clean residual min=-0.001570 max=0.001396 Jy/beam
! Clean residual mean=-0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.137772 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 74 components and 0.137772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061138Jy  sigma=1.387216
! Fit after  self-cal, rms=0.061138Jy  sigma=1.387196
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110447 Jy
! Component: 100  -  total flux cleaned = 0.00017893 Jy
! Component: 150  -  total flux cleaned = 0.000275869 Jy
! Component: 200  -  total flux cleaned = 0.000321949 Jy
! Total flux subtracted in 200 components = 0.000321949 Jy
! Clean residual min=-0.001545 max=0.001359 Jy/beam
! Clean residual mean=-0.000002 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.138094 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 79 components and 0.138094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061128Jy  sigma=1.387017
! Fit after  self-cal, rms=0.061127Jy  sigma=1.387006
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061127Jy  sigma=1.387006
! Fit after  self-cal, rms=0.061133Jy  sigma=1.386984
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=2.403 mas, bpa=13.14 degrees
! Estimated noise=0.299777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000352746 Jy
! Component: 100  -  total flux cleaned = 0.000608996 Jy
! Component: 150  -  total flux cleaned = 0.000815411 Jy
! Component: 200  -  total flux cleaned = 0.000983108 Jy
! Total flux subtracted in 200 components = 0.000983108 Jy
! Clean residual min=-0.001509 max=0.001543 Jy/beam
! Clean residual mean=-0.000004 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.139077 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 88 components and 0.139077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061131Jy  sigma=1.386901
! Fit after  self-cal, rms=0.061130Jy  sigma=1.386886
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.50453e-05 Jy
! Component: 100  -  total flux cleaned = 0.000180529 Jy
! Component: 150  -  total flux cleaned = 0.000225993 Jy
! Component: 200  -  total flux cleaned = 0.000240003 Jy
! Total flux subtracted in 200 components = 0.000240003 Jy
! Clean residual min=-0.001486 max=0.001507 Jy/beam
! Clean residual mean=-0.000004 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.139317 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 95 components and 0.139317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061130Jy  sigma=1.386876
! Fit after  self-cal, rms=0.061129Jy  sigma=1.386868
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=1.347 mas, bpa=1.787 degrees
! Estimated noise=0.247987 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.114 x 1.347 at 1.787 degrees (North through East)
! Clean map  min=-0.0013675  max=0.10906 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8356 mas, bmaj=1.063 mas, bpa=-10.42 degrees
! Estimated noise=0.49264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0846585 Jy
! Component: 100  -  total flux cleaned = 0.10581 Jy
! Component: 150  -  total flux cleaned = 0.115532 Jy
! Component: 200  -  total flux cleaned = 0.121092 Jy
! Total flux subtracted in 200 components = 0.121092 Jy
! Clean residual min=-0.003687 max=0.004152 Jy/beam
! Clean residual mean=0.000001 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.121092 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.121092 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=1.347 mas, bpa=1.787 degrees
! Estimated noise=0.247987 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00512415 Jy
! Component: 100  -  total flux cleaned = 0.00788397 Jy
! Component: 150  -  total flux cleaned = 0.00991856 Jy
! Component: 200  -  total flux cleaned = 0.011472 Jy
! Total flux subtracted in 200 components = 0.011472 Jy
! Clean residual min=-0.001656 max=0.001511 Jy/beam
! Clean residual mean=-0.000002 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.132564 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 32 components and 0.132564 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=2.403 mas, bpa=13.14 degrees
! Estimated noise=0.299777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145785 Jy
! Component: 100  -  total flux cleaned = 0.00248726 Jy
! Component: 150  -  total flux cleaned = 0.00331195 Jy
! Component: 200  -  total flux cleaned = 0.00399886 Jy
! Total flux subtracted in 200 components = 0.00399886 Jy
! Clean residual min=-0.001536 max=0.001536 Jy/beam
! Clean residual mean=-0.000004 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.136563 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000575245 Jy
! Component: 100  -  total flux cleaned = 0.00105771 Jy
! Component: 150  -  total flux cleaned = 0.00146377 Jy
! Component: 200  -  total flux cleaned = 0.00172997 Jy
! Total flux subtracted in 200 components = 0.00172997 Jy
! Clean residual min=-0.001470 max=0.001522 Jy/beam
! Clean residual mean=-0.000004 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.138293 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 69 components and 0.138293 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=1.347 mas, bpa=1.787 degrees
! Estimated noise=0.247987 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141711 Jy
! Component: 100  -  total flux cleaned = 0.000252209 Jy
! Component: 150  -  total flux cleaned = 0.000325234 Jy
! Component: 200  -  total flux cleaned = 0.000411809 Jy
! Total flux subtracted in 200 components = 0.000411809 Jy
! Clean residual min=-0.001540 max=0.001402 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.138705 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.138705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061157Jy  sigma=1.387368
! Fit after  self-cal, rms=0.061148Jy  sigma=1.387168
wmodel /J0839+4227_X_map.mod
! wmodel: Unable to open new model file: /J0839+4227_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0839+4227_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.114 x 1.347 at 1.787 degrees (North through East)
! Clean map  min=-0.0013926  max=0.10884 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0839+4227_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.108844 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000333745 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.919878 0.919878 1.83976 3.67951 7.35902 14.718 29.4361 58.8722
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.108 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  326.13 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0839+4227_X_dfm.log closed on Thu May 19 22:15:55 2016