! Started logfile: /scr/pima/bg219h_uvs/J0810+4134_X_dfm.log on Thu May 19 22:15:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0810+4134_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0810+4134_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.918157 visibilities/baseline/integration-bin.
! Found source: J0810+4134
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20328 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0810+4134_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017808Jy  sigma=24.718766
! Fit after  self-cal, rms=0.780539Jy  sigma=18.885459
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8232 mas, bmaj=1.185 mas, bpa=-23.89 degrees
! Estimated noise=0.460804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167026 Jy
! Component: 100  -  total flux cleaned = 0.216581 Jy
! Total flux subtracted in 100 components = 0.216581 Jy
! Clean residual min=-0.006522 max=0.019942 Jy/beam
! Clean residual mean=0.000008 rms=0.001630 Jy/beam
! Combined flux in latest and established models = 0.216581 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.216581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071424Jy  sigma=1.613170
! Fit after  self-cal, rms=0.071401Jy  sigma=1.612287
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199069 Jy
! Component: 100  -  total flux cleaned = 0.0290394 Jy
! Total flux subtracted in 100 components = 0.0290394 Jy
! Clean residual min=-0.003918 max=0.005653 Jy/beam
! Clean residual mean=0.000002 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.245621 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.245621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065338Jy  sigma=1.455862
! Fit after  self-cal, rms=0.065334Jy  sigma=1.455673
! Inverting map 
! Added new window around map position (3.6, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00595839 Jy
! Component: 100  -  total flux cleaned = 0.00981238 Jy
! Total flux subtracted in 100 components = 0.00981238 Jy
! Clean residual min=-0.003467 max=0.003436 Jy/beam
! Clean residual mean=0.000001 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.255433 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.255433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064712Jy  sigma=1.440566
! Fit after  self-cal, rms=0.064699Jy  sigma=1.440247
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=1.4 mas, bpa=-16.99 degrees
! Estimated noise=0.212855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.003146 Jy
! Component: 100  -  total flux cleaned = 0.00365268 Jy
! Component: 150  -  total flux cleaned = 0.00385731 Jy
! Component: 200  -  total flux cleaned = 0.00403229 Jy
! Total flux subtracted in 200 components = 0.00403229 Jy
! Clean residual min=-0.002578 max=0.002541 Jy/beam
! Clean residual mean=0.000001 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.259465 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.259465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064478Jy  sigma=1.435574
! Fit after  self-cal, rms=0.064468Jy  sigma=1.435423
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.095 x 1.4 at -16.99 degrees (North through East)
! Clean map  min=-0.0023818  max=0.21956 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.93     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.92     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.92     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.91     KP        0.99     
!   LA        1.02     MK        1.02     NL        1.03     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.93     KP        1.01     
!   LA        1.03     MK        1.01     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.93     KP        1.00     
!   LA        0.99     MK        1.05     NL        0.99     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.95     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.95     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.94     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.93     KP        0.97     
!   LA        1.00     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.91     KP        1.02     
!   LA        1.00     MK        1.03     NL        1.00     OV        1.01     
!   PT        1.00     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.064468Jy  sigma=1.435423
! Fit after  self-cal, rms=0.063139Jy  sigma=1.423858
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=1.403 mas, bpa=-17.54 degrees
! Estimated noise=0.212393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000312106 Jy
! Component: 100  -  total flux cleaned = -0.000286633 Jy
! Component: 150  -  total flux cleaned = -0.00028607 Jy
! Component: 200  -  total flux cleaned = -0.000285396 Jy
! Total flux subtracted in 200 components = -0.000285396 Jy
! Clean residual min=-0.001553 max=0.001706 Jy/beam
! Clean residual mean=0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.25918 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 35 components and 0.25918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063114Jy  sigma=1.423251
! Fit after  self-cal, rms=0.063101Jy  sigma=1.423200
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063101Jy  sigma=1.423200
! Fit after  self-cal, rms=0.063084Jy  sigma=1.419431
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.401 mas, bpa=-17.6 degrees
! Estimated noise=0.212293 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000289744 Jy
! Component: 100  -  total flux cleaned = 0.000290626 Jy
! Component: 150  -  total flux cleaned = 0.000241381 Jy
! Component: 200  -  total flux cleaned = 0.000174343 Jy
! Total flux subtracted in 200 components = 0.000174343 Jy
! Clean residual min=-0.001375 max=0.001583 Jy/beam
! Clean residual mean=-0.000001 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.259354 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.259354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063061Jy  sigma=1.418907
! Fit after  self-cal, rms=0.063066Jy  sigma=1.418882
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (39.4, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111622 Jy
! Component: 100  -  total flux cleaned = 0.00108612 Jy
! Component: 150  -  total flux cleaned = 0.00108856 Jy
! Component: 200  -  total flux cleaned = 0.00104947 Jy
! Total flux subtracted in 200 components = 0.00104947 Jy
! Clean residual min=-0.001300 max=0.001502 Jy/beam
! Clean residual mean=-0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.260404 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 50 components and 0.260404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063036Jy  sigma=1.418074
! Fit after  self-cal, rms=0.063034Jy  sigma=1.418033
! Inverting map 
! Added new window around map position (-45.8, 49).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113189 Jy
! Component: 100  -  total flux cleaned = 0.00130386 Jy
! Component: 150  -  total flux cleaned = 0.00132716 Jy
! Component: 200  -  total flux cleaned = 0.00128846 Jy
! Total flux subtracted in 200 components = 0.00128846 Jy
! Clean residual min=-0.001352 max=0.001232 Jy/beam
! Clean residual mean=-0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.261692 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 68 components and 0.261692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063005Jy  sigma=1.417372
! Fit after  self-cal, rms=0.063004Jy  sigma=1.417344
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063004Jy  sigma=1.417344
! Fit after  self-cal, rms=0.063073Jy  sigma=1.417224
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=1.399 mas, bpa=-17.6 degrees
! Estimated noise=0.212327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000270545 Jy
! Component: 100  -  total flux cleaned = 0.000372886 Jy
! Component: 150  -  total flux cleaned = 0.000353216 Jy
! Component: 200  -  total flux cleaned = 0.000280589 Jy
! Total flux subtracted in 200 components = 0.000280589 Jy
! Clean residual min=-0.001305 max=0.001261 Jy/beam
! Clean residual mean=-0.000000 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.261973 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 70 components and 0.261973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063061Jy  sigma=1.416955
! Fit after  self-cal, rms=0.063063Jy  sigma=1.416953
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.53944e-06 Jy
! Component: 100  -  total flux cleaned = -3.20405e-05 Jy
! Component: 150  -  total flux cleaned = -4.83371e-05 Jy
! Component: 200  -  total flux cleaned = -6.44478e-05 Jy
! Total flux subtracted in 200 components = -6.44478e-05 Jy
! Clean residual min=-0.001289 max=0.001261 Jy/beam
! Clean residual mean=-0.000000 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.261908 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 76 components and 0.261908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063055Jy  sigma=1.416783
! Fit after  self-cal, rms=0.063055Jy  sigma=1.416782
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063055Jy  sigma=1.416782
! Fit after  self-cal, rms=0.063099Jy  sigma=1.416757
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=2.446 mas, bpa=6.901 degrees
! Estimated noise=0.25885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177753 Jy
! Component: 100  -  total flux cleaned = 0.000221847 Jy
! Component: 150  -  total flux cleaned = 0.000258889 Jy
! Component: 200  -  total flux cleaned = 0.000292092 Jy
! Total flux subtracted in 200 components = 0.000292092 Jy
! Clean residual min=-0.001225 max=0.001293 Jy/beam
! Clean residual mean=-0.000001 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.2622 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 87 components and 0.2622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063096Jy  sigma=1.416695
! Fit after  self-cal, rms=0.063097Jy  sigma=1.416691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.95714e-05 Jy
! Component: 100  -  total flux cleaned = 3.86041e-05 Jy
! Component: 150  -  total flux cleaned = 5.608e-05 Jy
! Component: 200  -  total flux cleaned = 6.42905e-05 Jy
! Total flux subtracted in 200 components = 6.42905e-05 Jy
! Clean residual min=-0.001223 max=0.001284 Jy/beam
! Clean residual mean=-0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.262265 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 95 components and 0.262265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063096Jy  sigma=1.416675
! Fit after  self-cal, rms=0.063096Jy  sigma=1.416674
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.398 mas, bpa=-17.58 degrees
! Estimated noise=0.212378 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.096 x 1.398 at -17.58 degrees (North through East)
! Clean map  min=-0.0011047  max=0.21975 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.823 mas, bmaj=1.184 mas, bpa=-24.46 degrees
! Estimated noise=0.460235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.166788 Jy
! Component: 100  -  total flux cleaned = 0.21611 Jy
! Component: 150  -  total flux cleaned = 0.235828 Jy
! Component: 200  -  total flux cleaned = 0.245099 Jy
! Total flux subtracted in 200 components = 0.245099 Jy
! Clean residual min=-0.003556 max=0.004695 Jy/beam
! Clean residual mean=0.000002 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.245099 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.245099 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.398 mas, bpa=-17.58 degrees
! Estimated noise=0.212378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00656213 Jy
! Component: 100  -  total flux cleaned = 0.0102051 Jy
! Component: 150  -  total flux cleaned = 0.0126622 Jy
! Component: 200  -  total flux cleaned = 0.0138361 Jy
! Total flux subtracted in 200 components = 0.0138361 Jy
! Clean residual min=-0.001597 max=0.001497 Jy/beam
! Clean residual mean=-0.000001 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.258935 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.258935 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=2.446 mas, bpa=6.901 degrees
! Estimated noise=0.25885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163118 Jy
! Component: 100  -  total flux cleaned = 0.0026614 Jy
! Component: 150  -  total flux cleaned = 0.0029833 Jy
! Component: 200  -  total flux cleaned = 0.0031047 Jy
! Total flux subtracted in 200 components = 0.0031047 Jy
! Clean residual min=-0.001367 max=0.001309 Jy/beam
! Clean residual mean=-0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.26204 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107399 Jy
! Component: 100  -  total flux cleaned = 0.000201212 Jy
! Component: 150  -  total flux cleaned = 0.000285141 Jy
! Component: 200  -  total flux cleaned = 0.000342052 Jy
! Total flux subtracted in 200 components = 0.000342052 Jy
! Clean residual min=-0.001299 max=0.001289 Jy/beam
! Clean residual mean=-0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.262382 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 55 components and 0.262382 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.398 mas, bpa=-17.58 degrees
! Estimated noise=0.212378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000220621 Jy
! Component: 100  -  total flux cleaned = -0.000182979 Jy
! Component: 150  -  total flux cleaned = -0.000216715 Jy
! Component: 200  -  total flux cleaned = -0.000312179 Jy
! Total flux subtracted in 200 components = -0.000312179 Jy
! Clean residual min=-0.001337 max=0.001304 Jy/beam
! Clean residual mean=-0.000000 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.26207 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 64 components and 0.26207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063147Jy  sigma=1.417855
! Fit after  self-cal, rms=0.063147Jy  sigma=1.417814
wmodel /J0810+4134_X_map.mod
! wmodel: Unable to open new model file: /J0810+4134_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0810+4134_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.096 x 1.398 at -17.58 degrees (North through East)
! Clean map  min=-0.0011996  max=0.21948 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0810+4134_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.219476 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000309151 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.422577 0.422577 0.845154 1.69031 3.38061 6.76123 13.5225 27.0449 54.0898
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.219 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  709.93 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0810+4134_X_dfm.log closed on Thu May 19 22:15:08 2016