! Started logfile: /scr/pima/bg219h_uvs/J0808+4950_X_uvs.log on Thu Apr 7 12:04:26 2016 obs /scr/pima/bg219h_uvs/J0808+4950_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J0808+4950_X_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.778571 visibilities/baseline/integration-bin. ! Found source: J0808+4950 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 11772 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0808+4950_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.218439Jy sigma=31.168995 ! Fit after self-cal, rms=0.356217Jy sigma=8.583855 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8392 mas, bmaj=1.031 mas, bpa=-17.46 degrees ! Estimated noise=0.511126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.528216 Jy ! Component: 100 - total flux cleaned = 0.652256 Jy ! Total flux subtracted in 100 components = 0.652256 Jy ! Clean residual min=-0.023699 max=0.045595 Jy/beam ! Clean residual mean=0.000038 rms=0.005053 Jy/beam ! Combined flux in latest and established models = 0.652256 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.652256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.180461Jy sigma=4.319419 ! Fit after self-cal, rms=0.180272Jy sigma=4.314950 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452236 Jy ! Component: 100 - total flux cleaned = 0.0667417 Jy ! Total flux subtracted in 100 components = 0.0667417 Jy ! Clean residual min=-0.022821 max=0.025431 Jy/beam ! Clean residual mean=0.000011 rms=0.004259 Jy/beam ! Combined flux in latest and established models = 0.718998 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.718998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.168951Jy sigma=3.893026 ! Fit after self-cal, rms=0.168844Jy sigma=3.892305 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=1.253 mas, bpa=-8.443 degrees ! Estimated noise=0.354744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209637 Jy ! Component: 100 - total flux cleaned = 0.0294782 Jy ! Component: 150 - total flux cleaned = 0.0336915 Jy ! Component: 200 - total flux cleaned = 0.0361925 Jy ! Total flux subtracted in 200 components = 0.0361925 Jy ! Clean residual min=-0.012810 max=0.015040 Jy/beam ! Clean residual mean=0.000008 rms=0.002819 Jy/beam ! Combined flux in latest and established models = 0.75519 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.75519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.165937Jy sigma=3.781786 ! Fit after self-cal, rms=0.165733Jy sigma=3.776252 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 1.253 at -8.443 degrees (North through East) ! Clean map min=-0.010693 max=0.68924 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.92 KP 0.99 ! LA 0.99 MK 1.05 NL 1.00 OV 0.98 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.93 KP 0.97 ! LA 1.00 MK 1.04 NL 1.00 OV 0.98 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.92 KP 0.99 ! LA 0.99 MK 1.06 NL 1.00 OV 0.98 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.94 KP 0.98 ! LA 0.99 MK 1.04 NL 1.00 OV 0.99 ! PT 0.97 SC 0.99 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.94 KP 0.98 ! LA 1.00 MK 1.05 NL 1.01 OV 0.98 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.94 KP 0.99 ! LA 0.99 MK 1.03 NL 1.00 OV 0.99 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.94 KP 0.98 ! LA 0.99 MK 1.05 NL 1.00 OV 0.99 ! PT 0.97 SC 1.00 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.165733Jy sigma=3.776252 ! Fit after self-cal, rms=0.162930Jy sigma=3.712313 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.259 mas, bpa=-7.756 degrees ! Estimated noise=0.348906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803212 Jy ! Component: 100 - total flux cleaned = 0.00961038 Jy ! Component: 150 - total flux cleaned = 0.0103106 Jy ! Component: 200 - total flux cleaned = 0.0103013 Jy ! Total flux subtracted in 200 components = 0.0103013 Jy ! Clean residual min=-0.010677 max=0.012495 Jy/beam ! Clean residual mean=0.000004 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 0.765492 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 53 components and 0.765492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.160976Jy sigma=3.666052 ! Fit after self-cal, rms=0.160850Jy sigma=3.663360 ! Inverting map ! Added new window around map position (13.4, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584481 Jy ! Component: 100 - total flux cleaned = 0.00582945 Jy ! Component: 150 - total flux cleaned = 0.00687721 Jy ! Component: 200 - total flux cleaned = 0.00657313 Jy ! Total flux subtracted in 200 components = 0.00657313 Jy ! Clean residual min=-0.009630 max=0.011556 Jy/beam ! Clean residual mean=0.000003 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.772065 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.772065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.159113Jy sigma=3.619329 ! Fit after self-cal, rms=0.159062Jy sigma=3.617731 ! Inverting map ! Added new window around map position (6.4, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105777 Jy ! Component: 100 - total flux cleaned = 0.0136188 Jy ! Component: 150 - total flux cleaned = 0.0144696 Jy ! Component: 200 - total flux cleaned = 0.0147412 Jy ! Total flux subtracted in 200 components = 0.0147412 Jy ! Clean residual min=-0.008657 max=0.010334 Jy/beam ! Clean residual mean=0.000006 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 0.786806 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 88 components and 0.786806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.157846Jy sigma=3.589270 ! Fit after self-cal, rms=0.157811Jy sigma=3.588299 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.157811Jy sigma=3.588299 ! Fit after self-cal, rms=0.157388Jy sigma=3.572968 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.063 mas, bmaj=1.257 mas, bpa=-7.475 degrees ! Estimated noise=0.347381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00205378 Jy ! Component: 100 - total flux cleaned = -0.00178991 Jy ! Component: 150 - total flux cleaned = -0.00155984 Jy ! Component: 200 - total flux cleaned = -0.000873986 Jy ! Total flux subtracted in 200 components = -0.000873986 Jy ! Clean residual min=-0.007791 max=0.009804 Jy/beam ! Clean residual mean=-0.000012 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.785932 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 103 components and 0.785932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.156407Jy sigma=3.558557 ! Fit after self-cal, rms=0.156402Jy sigma=3.558310 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.6, 23.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338968 Jy ! Component: 100 - total flux cleaned = 0.00280105 Jy ! Component: 150 - total flux cleaned = 0.00255188 Jy ! Component: 200 - total flux cleaned = 0.00254383 Jy ! Total flux subtracted in 200 components = 0.00254383 Jy ! Clean residual min=-0.007449 max=0.008436 Jy/beam ! Clean residual mean=-0.000013 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.788476 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 0.788476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.155464Jy sigma=3.537011 ! Fit after self-cal, rms=0.155442Jy sigma=3.536282 ! Inverting map ! Added new window around map position (-17, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433954 Jy ! Component: 100 - total flux cleaned = 0.00455434 Jy ! Component: 150 - total flux cleaned = 0.00476587 Jy ! Component: 200 - total flux cleaned = 0.00496912 Jy ! Total flux subtracted in 200 components = 0.00496912 Jy ! Clean residual min=-0.006717 max=0.007404 Jy/beam ! Clean residual mean=-0.000008 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.793445 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 138 components and 0.793445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.154695Jy sigma=3.516489 ! Fit after self-cal, rms=0.154669Jy sigma=3.515579 ! Inverting map ! Added new window around map position (-40.4, 30.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540556 Jy ! Component: 100 - total flux cleaned = 0.00518679 Jy ! Component: 150 - total flux cleaned = 0.00599538 Jy ! Component: 200 - total flux cleaned = 0.00657587 Jy ! Total flux subtracted in 200 components = 0.00657587 Jy ! Clean residual min=-0.006451 max=0.007046 Jy/beam ! Clean residual mean=-0.000006 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.800021 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 164 components and 0.800021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.154033Jy sigma=3.501160 ! Fit after self-cal, rms=0.154000Jy sigma=3.500453 ! Inverting map ! Added new window around map position (-27.4, 27.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703374 Jy ! Component: 100 - total flux cleaned = 0.0100569 Jy ! Component: 150 - total flux cleaned = 0.0109722 Jy ! Component: 200 - total flux cleaned = 0.0118442 Jy ! Total flux subtracted in 200 components = 0.0118442 Jy ! Clean residual min=-0.005976 max=0.006689 Jy/beam ! Clean residual mean=-0.000002 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.811865 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 178 components and 0.811865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.153419Jy sigma=3.488613 ! Fit after self-cal, rms=0.153412Jy sigma=3.488282 ! Inverting map ! Added new window around map position (-4.6, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00698653 Jy ! Component: 100 - total flux cleaned = 0.0105369 Jy ! Component: 150 - total flux cleaned = 0.012574 Jy ! Component: 200 - total flux cleaned = 0.0135381 Jy ! Total flux subtracted in 200 components = 0.0135381 Jy ! Clean residual min=-0.005940 max=0.006150 Jy/beam ! Clean residual mean=-0.000003 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.825403 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 197 components and 0.825403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.152885Jy sigma=3.477299 ! Fit after self-cal, rms=0.152882Jy sigma=3.477031 ! Inverting map ! Added new window around map position (-16.6, 33.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560412 Jy ! Component: 100 - total flux cleaned = 0.00688653 Jy ! Component: 150 - total flux cleaned = 0.00703598 Jy ! Component: 200 - total flux cleaned = 0.00718468 Jy ! Total flux subtracted in 200 components = 0.00718468 Jy ! Clean residual min=-0.005665 max=0.005850 Jy/beam ! Clean residual mean=0.000000 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.832588 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 218 components and 0.832587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.152478Jy sigma=3.469185 ! Fit after self-cal, rms=0.152471Jy sigma=3.468873 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.152471Jy sigma=3.468873 ! Fit after self-cal, rms=0.153855Jy sigma=3.442003 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=1.261 mas, bpa=-6.574 degrees ! Estimated noise=0.345505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0045746 Jy ! Component: 100 - total flux cleaned = -0.00342945 Jy ! Component: 150 - total flux cleaned = -0.00250855 Jy ! Component: 200 - total flux cleaned = -0.00213583 Jy ! Total flux subtracted in 200 components = -0.00213583 Jy ! Clean residual min=-0.005019 max=0.005036 Jy/beam ! Clean residual mean=0.000003 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.830452 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 245 components and 0.830452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.153322Jy sigma=3.439792 ! Fit after self-cal, rms=0.153319Jy sigma=3.439693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000365895 Jy ! Component: 100 - total flux cleaned = 0.000716827 Jy ! Component: 150 - total flux cleaned = 0.00138961 Jy ! Component: 200 - total flux cleaned = 0.00160388 Jy ! Total flux subtracted in 200 components = 0.00160388 Jy ! Clean residual min=-0.004980 max=0.004884 Jy/beam ! Clean residual mean=0.000004 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.832055 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 258 components and 0.832055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.153137Jy sigma=3.436623 ! Fit after self-cal, rms=0.153136Jy sigma=3.436577 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.153136Jy sigma=3.436577 ! Fit after self-cal, rms=0.152388Jy sigma=3.433840 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.32 mas, bmaj=2.428 mas, bpa=-62.36 degrees ! Estimated noise=0.437989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00508224 Jy ! Component: 100 - total flux cleaned = -0.00413107 Jy ! Component: 150 - total flux cleaned = -0.00345519 Jy ! Component: 200 - total flux cleaned = -0.0033712 Jy ! Total flux subtracted in 200 components = -0.0033712 Jy ! Clean residual min=-0.006085 max=0.005540 Jy/beam ! Clean residual mean=0.000008 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.828684 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 284 components and 0.828684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.151994Jy sigma=3.436625 ! Fit after self-cal, rms=0.151979Jy sigma=3.435949 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.09719e-05 Jy ! Component: 100 - total flux cleaned = 0.000110956 Jy ! Component: 150 - total flux cleaned = 0.000616136 Jy ! Component: 200 - total flux cleaned = 0.00102257 Jy ! Total flux subtracted in 200 components = 0.00102257 Jy ! Clean residual min=-0.006007 max=0.005385 Jy/beam ! Clean residual mean=0.000010 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.829707 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 301 components and 0.829707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.151917Jy sigma=3.436010 ! Fit after self-cal, rms=0.151919Jy sigma=3.435915 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=1.261 mas, bpa=-6.464 degrees ! Estimated noise=0.342936 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.064 x 1.261 at -6.464 degrees (North through East) ! Clean map min=-0.0064018 max=0.66402 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.151919Jy sigma=3.435915 ! Fit after self-cal, rms=0.148667Jy sigma=3.341890 ! Inverting map and beam ! Estimated beam: bmin=1.067 mas, bmaj=1.262 mas, bpa=-5.728 degrees ! Estimated noise=0.334201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0147412 Jy ! Component: 100 - total flux cleaned = -0.0150776 Jy ! Component: 150 - total flux cleaned = -0.0142164 Jy ! Component: 200 - total flux cleaned = -0.0140562 Jy ! Total flux subtracted in 200 components = -0.0140562 Jy ! Clean residual min=-0.005683 max=0.005492 Jy/beam ! Clean residual mean=-0.000003 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.815651 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 311 components and 0.81565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.146389Jy sigma=3.321353 ! Fit after self-cal, rms=0.146386Jy sigma=3.321198 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563493 Jy ! Component: 100 - total flux cleaned = 0.000949008 Jy ! Component: 150 - total flux cleaned = 0.00143138 Jy ! Component: 200 - total flux cleaned = 0.00223126 Jy ! Total flux subtracted in 200 components = 0.00223126 Jy ! Clean residual min=-0.005815 max=0.005363 Jy/beam ! Clean residual mean=-0.000003 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.817882 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 324 components and 0.817882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.146142Jy sigma=3.317452 ! Fit after self-cal, rms=0.146142Jy sigma=3.317359 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.146142Jy sigma=3.317359 ! Fit after self-cal, rms=0.145128Jy sigma=3.291590 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8547 mas, bmaj=1.034 mas, bpa=-13.75 degrees ! Estimated noise=0.478471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.494345 Jy ! Component: 100 - total flux cleaned = 0.604901 Jy ! Component: 150 - total flux cleaned = 0.643939 Jy ! Component: 200 - total flux cleaned = 0.67039 Jy ! Total flux subtracted in 200 components = 0.67039 Jy ! Clean residual min=-0.015000 max=0.017006 Jy/beam ! Clean residual mean=0.000009 rms=0.003209 Jy/beam ! Combined flux in latest and established models = 0.67039 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.67039 Jy ! Inverting map and beam ! Estimated beam: bmin=1.066 mas, bmaj=1.262 mas, bpa=-4.894 degrees ! Estimated noise=0.328216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248932 Jy ! Component: 100 - total flux cleaned = 0.041825 Jy ! Component: 150 - total flux cleaned = 0.0554144 Jy ! Component: 200 - total flux cleaned = 0.067055 Jy ! Total flux subtracted in 200 components = 0.067055 Jy ! Clean residual min=-0.008234 max=0.010866 Jy/beam ! Clean residual mean=-0.000015 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 0.737445 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 53 components and 0.737445 Jy ! Inverting map ! Added new window around map position (-19.6, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112512 Jy ! Component: 100 - total flux cleaned = 0.0203239 Jy ! Component: 150 - total flux cleaned = 0.0266242 Jy ! Component: 200 - total flux cleaned = 0.031846 Jy ! Total flux subtracted in 200 components = 0.031846 Jy ! Clean residual min=-0.008098 max=0.008447 Jy/beam ! Clean residual mean=-0.000008 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.769291 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 87 components and 0.76929 Jy ! Inverting map ! Added new window around map position (19.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00680633 Jy ! Component: 100 - total flux cleaned = 0.0115106 Jy ! Component: 150 - total flux cleaned = 0.0150993 Jy ! Component: 200 - total flux cleaned = 0.0182573 Jy ! Total flux subtracted in 200 components = 0.0182573 Jy ! Clean residual min=-0.007545 max=0.007922 Jy/beam ! Clean residual mean=-0.000004 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 0.787548 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 113 components and 0.787548 Jy ! Inverting map ! Added new window around map position (-6.6, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671467 Jy ! Component: 100 - total flux cleaned = 0.00988272 Jy ! Component: 150 - total flux cleaned = 0.0124312 Jy ! Component: 200 - total flux cleaned = 0.0142052 Jy ! Total flux subtracted in 200 components = 0.0142052 Jy ! Clean residual min=-0.007173 max=0.007316 Jy/beam ! Clean residual mean=-0.000003 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.801753 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 137 components and 0.801753 Jy ! Inverting map ! Added new window around map position (18.2, -16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601684 Jy ! Component: 100 - total flux cleaned = 0.00979279 Jy ! Component: 150 - total flux cleaned = 0.0119999 Jy ! Component: 200 - total flux cleaned = 0.0139249 Jy ! Total flux subtracted in 200 components = 0.0139249 Jy ! Clean residual min=-0.006551 max=0.006880 Jy/beam ! Clean residual mean=-0.000002 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.815678 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 155 components and 0.815678 Jy ! Inverting map ! Added new window around map position (-24.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604982 Jy ! Component: 100 - total flux cleaned = 0.00792565 Jy ! Component: 150 - total flux cleaned = 0.00970147 Jy ! Component: 200 - total flux cleaned = 0.0107218 Jy ! Total flux subtracted in 200 components = 0.0107218 Jy ! Clean residual min=-0.005922 max=0.006489 Jy/beam ! Clean residual mean=0.000002 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.8264 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 181 components and 0.826399 Jy ! Inverting map ! Added new window around map position (-29.8, 22.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378334 Jy ! Component: 100 - total flux cleaned = 0.00610675 Jy ! Component: 150 - total flux cleaned = 0.00810361 Jy ! Component: 200 - total flux cleaned = 0.00890165 Jy ! Total flux subtracted in 200 components = 0.00890165 Jy ! Clean residual min=-0.005448 max=0.006653 Jy/beam ! Clean residual mean=0.000002 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.835301 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 205 components and 0.835301 Jy ! Inverting map ! Added new window around map position (1, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575565 Jy ! Component: 100 - total flux cleaned = 0.00752626 Jy ! Component: 150 - total flux cleaned = 0.0090619 Jy ! Component: 200 - total flux cleaned = 0.010388 Jy ! Total flux subtracted in 200 components = 0.010388 Jy ! Clean residual min=-0.005139 max=0.005519 Jy/beam ! Clean residual mean=0.000002 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.845689 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 223 components and 0.845689 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=2.427 mas, bpa=-63.99 degrees ! Estimated noise=0.418778 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207884 Jy ! Component: 100 - total flux cleaned = 0.00324403 Jy ! Component: 150 - total flux cleaned = 0.00428138 Jy ! Component: 200 - total flux cleaned = 0.00532772 Jy ! Total flux subtracted in 200 components = 0.00532772 Jy ! Clean residual min=-0.006606 max=0.006275 Jy/beam ! Clean residual mean=0.000005 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.851017 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427736 Jy ! Component: 100 - total flux cleaned = 0.000631846 Jy ! Component: 150 - total flux cleaned = 0.00063396 Jy ! Component: 200 - total flux cleaned = 0.000356325 Jy ! Total flux subtracted in 200 components = 0.000356325 Jy ! Clean residual min=-0.006562 max=0.006088 Jy/beam ! Clean residual mean=0.000004 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 0.851373 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 268 components and 0.851373 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.066 mas, bmaj=1.262 mas, bpa=-4.894 degrees ! Estimated noise=0.328216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000894154 Jy ! Component: 100 - total flux cleaned = 0.00173694 Jy ! Component: 150 - total flux cleaned = 0.00214167 Jy ! Component: 200 - total flux cleaned = 0.00252988 Jy ! Total flux subtracted in 200 components = 0.00252988 Jy ! Clean residual min=-0.004813 max=0.005345 Jy/beam ! Clean residual mean=0.000002 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.853903 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 285 components and 0.853903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.143232Jy sigma=3.273836 ! Fit after self-cal, rms=0.143156Jy sigma=3.271287 wmodel /scr/pima/bg219h_uvs/J0808+4950_X_map.mod ! Writing 285 model components to file: /scr/pima/bg219h_uvs/J0808+4950_X_map.mod wobs /scr/pima/bg219h_uvs/J0808+4950_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219h_uvs/J0808+4950_X_uvs.fits wwins /scr/pima/bg219h_uvs/J0808+4950_X_map.win ! wwins: Wrote 18 windows to /scr/pima/bg219h_uvs/J0808+4950_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218418 Jy ! Component: 100 - total flux cleaned = 0.00386014 Jy ! Component: 150 - total flux cleaned = 0.00488178 Jy ! Component: 200 - total flux cleaned = 0.00612095 Jy ! Component: 250 - total flux cleaned = 0.00700635 Jy ! Component: 300 - total flux cleaned = 0.00810707 Jy ! Component: 350 - total flux cleaned = 0.00879853 Jy ! Component: 400 - total flux cleaned = 0.00932568 Jy ! Component: 450 - total flux cleaned = 0.00969534 Jy ! Component: 500 - total flux cleaned = 0.010058 Jy ! Component: 550 - total flux cleaned = 0.0105551 Jy ! Component: 600 - total flux cleaned = 0.0108335 Jy ! Component: 650 - total flux cleaned = 0.0111086 Jy ! Component: 700 - total flux cleaned = 0.0114478 Jy ! Component: 750 - total flux cleaned = 0.0116483 Jy ! Component: 800 - total flux cleaned = 0.012042 Jy ! Component: 850 - total flux cleaned = 0.0120418 Jy ! Component: 900 - total flux cleaned = 0.0123613 Jy ! Component: 950 - total flux cleaned = 0.0126756 Jy ! Component: 1000 - total flux cleaned = 0.0127996 Jy ! Component: 1050 - total flux cleaned = 0.0129831 Jy ! Component: 1100 - total flux cleaned = 0.0129841 Jy ! Component: 1150 - total flux cleaned = 0.0133436 Jy ! Component: 1200 - total flux cleaned = 0.0135209 Jy ! Component: 1250 - total flux cleaned = 0.0137544 Jy ! Component: 1300 - total flux cleaned = 0.0137554 Jy ! Component: 1350 - total flux cleaned = 0.0140429 Jy ! Component: 1400 - total flux cleaned = 0.0144386 Jy ! Component: 1450 - total flux cleaned = 0.0143825 Jy ! Component: 1500 - total flux cleaned = 0.0145496 Jy ! Component: 1550 - total flux cleaned = 0.0144944 Jy ! Component: 1600 - total flux cleaned = 0.0146576 Jy ! Component: 1650 - total flux cleaned = 0.0147656 Jy ! Component: 1700 - total flux cleaned = 0.0147653 Jy ! Component: 1750 - total flux cleaned = 0.014765 Jy ! Component: 1800 - total flux cleaned = 0.0150281 Jy ! Component: 1850 - total flux cleaned = 0.0150805 Jy ! Component: 1900 - total flux cleaned = 0.0152357 Jy ! Component: 1950 - total flux cleaned = 0.01539 Jy ! Component: 2000 - total flux cleaned = 0.015543 Jy ! Component: 2050 - total flux cleaned = 0.0155936 Jy ! Component: 2100 - total flux cleaned = 0.015795 Jy ! Component: 2150 - total flux cleaned = 0.0157948 Jy ! Component: 2200 - total flux cleaned = 0.0157945 Jy ! Component: 2250 - total flux cleaned = 0.0159421 Jy ! Component: 2300 - total flux cleaned = 0.0158444 Jy ! Component: 2350 - total flux cleaned = 0.0160873 Jy ! Component: 2400 - total flux cleaned = 0.0160872 Jy ! Component: 2450 - total flux cleaned = 0.0161836 Jy ! Component: 2500 - total flux cleaned = 0.0162784 Jy ! Component: 2550 - total flux cleaned = 0.0161361 Jy ! Component: 2600 - total flux cleaned = 0.0162302 Jy ! Component: 2650 - total flux cleaned = 0.0164164 Jy ! Component: 2700 - total flux cleaned = 0.0163704 Jy ! Component: 2750 - total flux cleaned = 0.0165077 Jy ! Component: 2800 - total flux cleaned = 0.0163707 Jy ! Component: 2850 - total flux cleaned = 0.0163709 Jy ! Component: 2900 - total flux cleaned = 0.0165057 Jy ! Component: 2950 - total flux cleaned = 0.0167293 Jy ! Component: 3000 - total flux cleaned = 0.016507 Jy ! Component: 3050 - total flux cleaned = 0.0167278 Jy ! Component: 3100 - total flux cleaned = 0.0166843 Jy ! Component: 3150 - total flux cleaned = 0.0167277 Jy ! Component: 3200 - total flux cleaned = 0.0165979 Jy ! Component: 3250 - total flux cleaned = 0.0165983 Jy ! Component: 3300 - total flux cleaned = 0.0168549 Jy ! Component: 3350 - total flux cleaned = 0.0168978 Jy ! Component: 3400 - total flux cleaned = 0.0168975 Jy ! Component: 3450 - total flux cleaned = 0.0168974 Jy ! Component: 3500 - total flux cleaned = 0.017023 Jy ! Component: 3550 - total flux cleaned = 0.0170232 Jy ! Component: 3600 - total flux cleaned = 0.0169818 Jy ! Component: 3650 - total flux cleaned = 0.0169819 Jy ! Component: 3700 - total flux cleaned = 0.0171041 Jy ! Component: 3750 - total flux cleaned = 0.0173067 Jy ! Component: 3800 - total flux cleaned = 0.0172664 Jy ! Component: 3850 - total flux cleaned = 0.0171461 Jy ! Component: 3900 - total flux cleaned = 0.0174653 Jy ! Component: 3950 - total flux cleaned = 0.0175443 Jy ! Component: 4000 - total flux cleaned = 0.017623 Jy ! Component: 4050 - total flux cleaned = 0.0176226 Jy ! Total flux subtracted in 4096 components = 0.0176618 Jy ! Clean residual min=-0.001947 max=0.002607 Jy/beam ! Clean residual mean=0.000004 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.871565 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 611 components and 0.871565 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219h_uvs/J0808+4950_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.066 x 1.262 at -4.894 degrees (North through East) ! Clean map min=-0.0040887 max=0.63382 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0808+4950_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.633817 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00066363 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.314111 0.314111 0.628222 1.25644 2.51289 5.02577 10.0515 20.1031 40.2062 80.4124 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.633 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 955.076 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J0808+4950_X_uvs.log closed on Thu Apr 7 12:04:31 2016