! Started logfile: /scr/pima/bg219h_uvs/J0807+0708_X_dfm.log on Thu May 19 22:14:49 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0807+0708_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0807+0708_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.904189 visibilities/baseline/integration-bin.
! Found source: J0807+0708
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0807+0708_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005814Jy  sigma=24.980983
! Fit after  self-cal, rms=0.912299Jy  sigma=22.651412
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7332 mas, bmaj=1.702 mas, bpa=-4.053 degrees
! Estimated noise=0.356003 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0667587 Jy
! Component: 100  -  total flux cleaned = 0.0833249 Jy
! Total flux subtracted in 100 components = 0.0833249 Jy
! Clean residual min=-0.003150 max=0.006795 Jy/beam
! Clean residual mean=-0.000006 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.0833249 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0833249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061859Jy  sigma=1.431465
! Fit after  self-cal, rms=0.061383Jy  sigma=1.421247
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0077086 Jy
! Component: 100  -  total flux cleaned = 0.0117027 Jy
! Total flux subtracted in 100 components = 0.0117027 Jy
! Clean residual min=-0.002728 max=0.004200 Jy/beam
! Clean residual mean=-0.000003 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.0950276 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.0950276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060225Jy  sigma=1.391405
! Fit after  self-cal, rms=0.060231Jy  sigma=1.391092
! Inverting map 
! Added new window around map position (-1.6, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00367868 Jy
! Component: 100  -  total flux cleaned = 0.00475131 Jy
! Total flux subtracted in 100 components = 0.00475131 Jy
! Clean residual min=-0.002609 max=0.002607 Jy/beam
! Clean residual mean=-0.000002 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.0997789 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 15 components and 0.0997789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059997Jy  sigma=1.385277
! Fit after  self-cal, rms=0.059972Jy  sigma=1.384595
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.914 mas, bmaj=2.004 mas, bpa=-4.424 degrees
! Estimated noise=0.177265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201677 Jy
! Component: 100  -  total flux cleaned = 0.002367 Jy
! Component: 150  -  total flux cleaned = 0.00248469 Jy
! Component: 200  -  total flux cleaned = 0.00241919 Jy
! Total flux subtracted in 200 components = 0.00241919 Jy
! Clean residual min=-0.001838 max=0.001522 Jy/beam
! Clean residual mean=-0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.102198 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.102198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059876Jy  sigma=1.382658
! Fit after  self-cal, rms=0.059868Jy  sigma=1.382522
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.914 x 2.004 at -4.424 degrees (North through East)
! Clean map  min=-0.0016008  max=0.088801 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.94     KP        1.01     
!   LA        1.01     MK        1.06     NL        1.03     OV        1.03     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.93     KP        1.01     
!   LA        0.99     MK        1.09     NL        1.05     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.91     KP        1.02     
!   LA        1.00     MK        1.06     NL        1.04     OV        1.01     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.93     KP        1.02     
!   LA        1.02     MK        1.02     NL        1.03     OV        1.01     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.93     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.05     OV        1.04     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.91     KP        0.97     
!   LA        1.00     MK        1.06     NL        1.04     OV        0.98     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.88     KP        1.01     
!   LA        1.00     MK        0.98     NL        1.00     OV        1.02     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.95     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.95     KP        1.03     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.99     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.95     KP        0.99     
!   LA        1.00     MK        0.95     NL        1.06     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.95     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.87     KP        0.93     
!   LA        1.01     MK        1.03     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059868Jy  sigma=1.382522
! Fit after  self-cal, rms=0.058419Jy  sigma=1.378641
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9153 mas, bmaj=2.003 mas, bpa=-4.401 degrees
! Estimated noise=0.176468 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125982 Jy
! Component: 100  -  total flux cleaned = 0.000101783 Jy
! Component: 150  -  total flux cleaned = 6.63445e-05 Jy
! Component: 200  -  total flux cleaned = 3.48355e-05 Jy
! Total flux subtracted in 200 components = 3.48355e-05 Jy
! Clean residual min=-0.001225 max=0.001131 Jy/beam
! Clean residual mean=-0.000002 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.102233 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 33 components and 0.102233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058402Jy  sigma=1.378219
! Fit after  self-cal, rms=0.058381Jy  sigma=1.378054
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058381Jy  sigma=1.378054
! Fit after  self-cal, rms=0.058472Jy  sigma=1.375828
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9139 mas, bmaj=2 mas, bpa=-4.516 degrees
! Estimated noise=0.176464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.69347e-05 Jy
! Component: 100  -  total flux cleaned = 0.000130956 Jy
! Component: 150  -  total flux cleaned = 0.000152777 Jy
! Component: 200  -  total flux cleaned = 0.000162656 Jy
! Total flux subtracted in 200 components = 0.000162656 Jy
! Clean residual min=-0.001085 max=0.000981 Jy/beam
! Clean residual mean=-0.000001 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.102396 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.102396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058466Jy  sigma=1.375694
! Fit after  self-cal, rms=0.058472Jy  sigma=1.375615
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.15467e-05 Jy
! Component: 100  -  total flux cleaned = -2.10455e-05 Jy
! Component: 150  -  total flux cleaned = -1.18047e-05 Jy
! Component: 200  -  total flux cleaned = -2.96133e-06 Jy
! Total flux subtracted in 200 components = -2.96133e-06 Jy
! Clean residual min=-0.001098 max=0.000977 Jy/beam
! Clean residual mean=-0.000002 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.102393 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.102393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058468Jy  sigma=1.375534
! Fit after  self-cal, rms=0.058467Jy  sigma=1.375520
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058467Jy  sigma=1.375520
! Fit after  self-cal, rms=0.058436Jy  sigma=1.375516
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9132 mas, bmaj=1.999 mas, bpa=-4.498 degrees
! Estimated noise=0.176398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.71247e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103216 Jy
! Component: 150  -  total flux cleaned = 0.000111262 Jy
! Component: 200  -  total flux cleaned = 0.00011909 Jy
! Total flux subtracted in 200 components = 0.00011909 Jy
! Clean residual min=-0.001100 max=0.000963 Jy/beam
! Clean residual mean=-0.000002 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.102512 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.102512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058433Jy  sigma=1.375450
! Fit after  self-cal, rms=0.058433Jy  sigma=1.375441
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.21286e-05 Jy
! Component: 100  -  total flux cleaned = 3.50247e-06 Jy
! Component: 150  -  total flux cleaned = 1.06485e-05 Jy
! Component: 200  -  total flux cleaned = 1.73759e-05 Jy
! Total flux subtracted in 200 components = 1.73759e-05 Jy
! Clean residual min=-0.001107 max=0.000960 Jy/beam
! Clean residual mean=-0.000001 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.102529 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.102529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058431Jy  sigma=1.375401
! Fit after  self-cal, rms=0.058430Jy  sigma=1.375394
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058430Jy  sigma=1.375394
! Fit after  self-cal, rms=0.058397Jy  sigma=1.375392
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.065 mas, bmaj=3.054 mas, bpa=-3.111 degrees
! Estimated noise=0.220303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346914 Jy
! Component: 100  -  total flux cleaned = 0.000366407 Jy
! Component: 150  -  total flux cleaned = 0.000366492 Jy
! Component: 200  -  total flux cleaned = 0.000355309 Jy
! Total flux subtracted in 200 components = 0.000355309 Jy
! Clean residual min=-0.001149 max=0.001089 Jy/beam
! Clean residual mean=-0.000003 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.102884 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 0.102884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058398Jy  sigma=1.375418
! Fit after  self-cal, rms=0.058396Jy  sigma=1.375403
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.31955e-05 Jy
! Component: 100  -  total flux cleaned = 3.69489e-05 Jy
! Component: 150  -  total flux cleaned = 3.16375e-05 Jy
! Component: 200  -  total flux cleaned = 2.64434e-05 Jy
! Total flux subtracted in 200 components = 2.64434e-05 Jy
! Clean residual min=-0.001144 max=0.001088 Jy/beam
! Clean residual mean=-0.000003 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.102911 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.102911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058397Jy  sigma=1.375442
! Fit after  self-cal, rms=0.058396Jy  sigma=1.375438
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9126 mas, bmaj=1.997 mas, bpa=-4.484 degrees
! Estimated noise=0.176348 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9126 x 1.997 at -4.484 degrees (North through East)
! Clean map  min=-0.0010755  max=0.088294 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.733 mas, bmaj=1.699 mas, bpa=-4.135 degrees
! Estimated noise=0.353481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0664864 Jy
! Component: 100  -  total flux cleaned = 0.0833062 Jy
! Component: 150  -  total flux cleaned = 0.0913978 Jy
! Component: 200  -  total flux cleaned = 0.096263 Jy
! Total flux subtracted in 200 components = 0.096263 Jy
! Clean residual min=-0.002252 max=0.002509 Jy/beam
! Clean residual mean=-0.000003 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.096263 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.096263 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9126 mas, bmaj=1.997 mas, bpa=-4.484 degrees
! Estimated noise=0.176348 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00382389 Jy
! Component: 100  -  total flux cleaned = 0.00572856 Jy
! Component: 150  -  total flux cleaned = 0.00636676 Jy
! Component: 200  -  total flux cleaned = 0.00649999 Jy
! Total flux subtracted in 200 components = 0.00649999 Jy
! Clean residual min=-0.001062 max=0.000939 Jy/beam
! Clean residual mean=-0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.102763 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.102763 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.065 mas, bmaj=3.054 mas, bpa=-3.111 degrees
! Estimated noise=0.220303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000349223 Jy
! Component: 100  -  total flux cleaned = 0.000368732 Jy
! Component: 150  -  total flux cleaned = 0.000353667 Jy
! Component: 200  -  total flux cleaned = 0.000340347 Jy
! Total flux subtracted in 200 components = 0.000340347 Jy
! Clean residual min=-0.001181 max=0.001106 Jy/beam
! Clean residual mean=-0.000003 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.103103 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.35716e-05 Jy
! Component: 100  -  total flux cleaned = -4.44342e-05 Jy
! Component: 150  -  total flux cleaned = -6.34879e-05 Jy
! Component: 200  -  total flux cleaned = -7.20325e-05 Jy
! Total flux subtracted in 200 components = -7.20325e-05 Jy
! Clean residual min=-0.001131 max=0.001083 Jy/beam
! Clean residual mean=-0.000003 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.103031 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.103031 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9126 mas, bmaj=1.997 mas, bpa=-4.484 degrees
! Estimated noise=0.176348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.26024e-05 Jy
! Component: 100  -  total flux cleaned = -2.75441e-05 Jy
! Component: 150  -  total flux cleaned = -5.48426e-05 Jy
! Component: 200  -  total flux cleaned = -6.75315e-05 Jy
! Total flux subtracted in 200 components = -6.75315e-05 Jy
! Clean residual min=-0.001115 max=0.000960 Jy/beam
! Clean residual mean=-0.000001 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.102964 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.102964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058400Jy  sigma=1.375464
! Fit after  self-cal, rms=0.058400Jy  sigma=1.375440
wmodel /J0807+0708_X_map.mod
! wmodel: Unable to open new model file: /J0807+0708_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0807+0708_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9126 x 1.997 at -4.484 degrees (North through East)
! Clean map  min=-0.0010255  max=0.088255 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0807+0708_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0882552 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000235856 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.801731 0.801731 1.60346 3.20692 6.41385 12.8277 25.6554 51.3108
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  374.19 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0807+0708_X_dfm.log closed on Thu May 19 22:14:52 2016