! Started logfile: /scr/pima/bg219h_uvs/J0803+0421_X_dfm.log on Thu May 19 22:14:34 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0803+0421_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0803+0421_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.934113 visibilities/baseline/integration-bin.
! Found source: J0803+0421
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 28752 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0803+0421_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021723Jy  sigma=24.557799
! Fit after  self-cal, rms=0.748093Jy  sigma=17.857170
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7309 mas, bmaj=1.737 mas, bpa=-3.085 degrees
! Estimated noise=0.305439 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1907 Jy
! Component: 100  -  total flux cleaned = 0.245078 Jy
! Total flux subtracted in 100 components = 0.245078 Jy
! Clean residual min=-0.006332 max=0.021485 Jy/beam
! Clean residual mean=-0.000001 rms=0.001806 Jy/beam
! Combined flux in latest and established models = 0.245078 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.245078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073685Jy  sigma=1.686620
! Fit after  self-cal, rms=0.073652Jy  sigma=1.685699
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225641 Jy
! Component: 100  -  total flux cleaned = 0.0343688 Jy
! Total flux subtracted in 100 components = 0.0343688 Jy
! Clean residual min=-0.005076 max=0.005757 Jy/beam
! Clean residual mean=0.000000 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.279447 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.279447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065569Jy  sigma=1.477760
! Fit after  self-cal, rms=0.065515Jy  sigma=1.476450
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00685219 Jy
! Component: 100  -  total flux cleaned = 0.0110884 Jy
! Total flux subtracted in 100 components = 0.0110884 Jy
! Clean residual min=-0.004523 max=0.003683 Jy/beam
! Clean residual mean=0.000001 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.290535 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.290535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064671Jy  sigma=1.456107
! Fit after  self-cal, rms=0.064665Jy  sigma=1.455919
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.919 mas, bmaj=2.046 mas, bpa=-3.857 degrees
! Estimated noise=0.17877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320547 Jy
! Component: 100  -  total flux cleaned = 0.00445765 Jy
! Component: 150  -  total flux cleaned = 0.00521127 Jy
! Component: 200  -  total flux cleaned = 0.00577119 Jy
! Total flux subtracted in 200 components = 0.00577119 Jy
! Clean residual min=-0.002715 max=0.002566 Jy/beam
! Clean residual mean=0.000003 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.296306 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 39 components and 0.296306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064333Jy  sigma=1.448907
! Fit after  self-cal, rms=0.064321Jy  sigma=1.448581
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.919 x 2.046 at -3.857 degrees (North through East)
! Clean map  min=-0.0024253  max=0.25384 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.94     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.94     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.94     KP        1.01     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.94     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.96     KP        0.99     
!   LA        1.02     MK        1.04     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.92     KP        1.01     
!   LA        1.03     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.94     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.95     KP        1.00     
!   LA        1.02     MK        1.02     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.94     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.95     KP        1.00     
!   LA        1.01     MK        1.03     NL        1.01     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.94     KP        1.01     
!   LA        1.01     MK        1.04     NL        0.99     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.93     KP        0.98     
!   LA        1.01     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.064321Jy  sigma=1.448581
! Fit after  self-cal, rms=0.063037Jy  sigma=1.436109
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9209 mas, bmaj=2.05 mas, bpa=-3.84 degrees
! Estimated noise=0.178264 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100835 Jy
! Component: 100  -  total flux cleaned = 0.00116199 Jy
! Component: 150  -  total flux cleaned = 0.00123796 Jy
! Component: 200  -  total flux cleaned = 0.00126057 Jy
! Total flux subtracted in 200 components = 0.00126057 Jy
! Clean residual min=-0.001484 max=0.001411 Jy/beam
! Clean residual mean=0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.297567 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 58 components and 0.297567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063000Jy  sigma=1.435371
! Fit after  self-cal, rms=0.062986Jy  sigma=1.435257
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062986Jy  sigma=1.435257
! Fit after  self-cal, rms=0.062908Jy  sigma=1.432353
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9206 mas, bmaj=2.049 mas, bpa=-3.866 degrees
! Estimated noise=0.178184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114073 Jy
! Component: 100  -  total flux cleaned = -6.56562e-05 Jy
! Component: 150  -  total flux cleaned = -6.5034e-05 Jy
! Component: 200  -  total flux cleaned = -4.51923e-05 Jy
! Total flux subtracted in 200 components = -4.51923e-05 Jy
! Clean residual min=-0.001212 max=0.001347 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.297522 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 0.297522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062889Jy  sigma=1.431996
! Fit after  self-cal, rms=0.062888Jy  sigma=1.431961
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.4, 34).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000997104 Jy
! Component: 100  -  total flux cleaned = 0.0013295 Jy
! Component: 150  -  total flux cleaned = 0.00155856 Jy
! Component: 200  -  total flux cleaned = 0.00169889 Jy
! Total flux subtracted in 200 components = 0.00169889 Jy
! Clean residual min=-0.001134 max=0.001142 Jy/beam
! Clean residual mean=0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.299221 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 0.299221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062856Jy  sigma=1.431300
! Fit after  self-cal, rms=0.062855Jy  sigma=1.431265
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062855Jy  sigma=1.431265
! Fit after  self-cal, rms=0.062877Jy  sigma=1.431229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9207 mas, bmaj=2.049 mas, bpa=-3.881 degrees
! Estimated noise=0.178207 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128615 Jy
! Component: 100  -  total flux cleaned = 0.000204757 Jy
! Component: 150  -  total flux cleaned = 0.000257103 Jy
! Component: 200  -  total flux cleaned = 0.000304859 Jy
! Total flux subtracted in 200 components = 0.000304859 Jy
! Clean residual min=-0.001116 max=0.001116 Jy/beam
! Clean residual mean=0.000001 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.299525 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 87 components and 0.299525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062866Jy  sigma=1.431030
! Fit after  self-cal, rms=0.062865Jy  sigma=1.431018
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.40068e-05 Jy
! Component: 100  -  total flux cleaned = 0.00011408 Jy
! Component: 150  -  total flux cleaned = 0.000128779 Jy
! Component: 200  -  total flux cleaned = 0.000155925 Jy
! Total flux subtracted in 200 components = 0.000155925 Jy
! Clean residual min=-0.001097 max=0.001094 Jy/beam
! Clean residual mean=0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.299681 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 96 components and 0.299681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062857Jy  sigma=1.430891
! Fit after  self-cal, rms=0.062857Jy  sigma=1.430879
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062857Jy  sigma=1.430879
! Fit after  self-cal, rms=0.062876Jy  sigma=1.430870
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.112 mas, bmaj=3.18 mas, bpa=-3.335 degrees
! Estimated noise=0.222609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030164 Jy
! Component: 100  -  total flux cleaned = 0.00049821 Jy
! Component: 150  -  total flux cleaned = 0.000597359 Jy
! Component: 200  -  total flux cleaned = 0.00067975 Jy
! Total flux subtracted in 200 components = 0.00067975 Jy
! Clean residual min=-0.001389 max=0.001641 Jy/beam
! Clean residual mean=0.000002 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.300361 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 103 components and 0.300361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062873Jy  sigma=1.430829
! Fit after  self-cal, rms=0.062873Jy  sigma=1.430815
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-27.2, 33.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000782746 Jy
! Component: 100  -  total flux cleaned = 0.000787767 Jy
! Component: 150  -  total flux cleaned = 0.000731696 Jy
! Component: 200  -  total flux cleaned = 0.000792319 Jy
! Total flux subtracted in 200 components = 0.000792319 Jy
! Clean residual min=-0.001205 max=0.001021 Jy/beam
! Clean residual mean=0.000002 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.301154 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 132 components and 0.301154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062845Jy  sigma=1.430178
! Fit after  self-cal, rms=0.062844Jy  sigma=1.430144
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9208 mas, bmaj=2.05 mas, bpa=-3.896 degrees
! Estimated noise=0.178245 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9208 x 2.05 at -3.896 degrees (North through East)
! Clean map  min=-0.00091608  max=0.25315 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7326 mas, bmaj=1.74 mas, bpa=-3.133 degrees
! Estimated noise=0.30486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.190304 Jy
! Component: 100  -  total flux cleaned = 0.244257 Jy
! Component: 150  -  total flux cleaned = 0.266511 Jy
! Component: 200  -  total flux cleaned = 0.278056 Jy
! Total flux subtracted in 200 components = 0.278056 Jy
! Clean residual min=-0.002754 max=0.005653 Jy/beam
! Clean residual mean=-0.000000 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.278056 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.278056 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9208 mas, bmaj=2.05 mas, bpa=-3.896 degrees
! Estimated noise=0.178245 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00800112 Jy
! Component: 100  -  total flux cleaned = 0.0123436 Jy
! Component: 150  -  total flux cleaned = 0.0149854 Jy
! Component: 200  -  total flux cleaned = 0.0168214 Jy
! Total flux subtracted in 200 components = 0.0168214 Jy
! Clean residual min=-0.001360 max=0.001345 Jy/beam
! Clean residual mean=0.000001 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.294877 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.294877 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.112 mas, bmaj=3.18 mas, bpa=-3.335 degrees
! Estimated noise=0.222609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195373 Jy
! Component: 100  -  total flux cleaned = 0.00278688 Jy
! Component: 150  -  total flux cleaned = 0.00327727 Jy
! Component: 200  -  total flux cleaned = 0.00369344 Jy
! Total flux subtracted in 200 components = 0.00369344 Jy
! Clean residual min=-0.001367 max=0.001279 Jy/beam
! Clean residual mean=0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.298571 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394655 Jy
! Component: 100  -  total flux cleaned = 0.000768094 Jy
! Component: 150  -  total flux cleaned = 0.00107115 Jy
! Component: 200  -  total flux cleaned = 0.00131888 Jy
! Total flux subtracted in 200 components = 0.00131888 Jy
! Clean residual min=-0.001200 max=0.001133 Jy/beam
! Clean residual mean=0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.29989 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 112 components and 0.29989 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9208 mas, bmaj=2.05 mas, bpa=-3.896 degrees
! Estimated noise=0.178245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000118629 Jy
! Component: 100  -  total flux cleaned = -5.54952e-05 Jy
! Component: 150  -  total flux cleaned = 0.000157619 Jy
! Component: 200  -  total flux cleaned = 0.000300101 Jy
! Total flux subtracted in 200 components = 0.000300101 Jy
! Clean residual min=-0.001058 max=0.000952 Jy/beam
! Clean residual mean=0.000001 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.30019 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 131 components and 0.30019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062897Jy  sigma=1.430920
! Fit after  self-cal, rms=0.062891Jy  sigma=1.430843
wmodel /J0803+0421_X_map.mod
! wmodel: Unable to open new model file: /J0803+0421_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0803+0421_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9208 x 2.05 at -3.896 degrees (North through East)
! Clean map  min=-0.00097871  max=0.25313 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0803+0421_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.25313 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000243479 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.288561 0.288561 0.577123 1.15425 2.30849 4.61698 9.23396 18.4679 36.9358 73.8717
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.253 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1039.64 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0803+0421_X_dfm.log closed on Thu May 19 22:14:37 2016