! Started logfile: /scr/pima/bg219h_uvs/J0725+1425_S_uvs.log on Thu Apr  7 08:56:08 2016
obs /scr/pima/bg219h_uvs/J0725+1425_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0725+1425_S_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.444444 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0725+1425
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1120 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0725+1425_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.154921Jy  sigma=25.607410
! Fit after  self-cal, rms=0.564458Jy  sigma=12.541567
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.613 mas, bmaj=6.836 mas, bpa=-1.051 degrees
! Estimated noise=1.75061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.341597 Jy
! Component: 100  -  total flux cleaned = 0.449959 Jy
! Total flux subtracted in 100 components = 0.449959 Jy
! Clean residual min=-0.033092 max=0.060467 Jy/beam
! Clean residual mean=0.000062 rms=0.010543 Jy/beam
! Combined flux in latest and established models = 0.449959 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.449959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137582Jy  sigma=2.918746
! Fit after  self-cal, rms=0.136735Jy  sigma=2.900945
! Inverting map 
! Added new window around map position (-3.5, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0671458 Jy
! Component: 100  -  total flux cleaned = 0.11146 Jy
! Total flux subtracted in 100 components = 0.11146 Jy
! Clean residual min=-0.019132 max=0.024218 Jy/beam
! Clean residual mean=0.000040 rms=0.005608 Jy/beam
! Combined flux in latest and established models = 0.56142 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.56142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086613Jy  sigma=1.858070
! Fit after  self-cal, rms=0.085374Jy  sigma=1.831481
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.739 mas, bmaj=6.649 mas, bpa=0.1105 degrees
! Estimated noise=1.4979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0388169 Jy
! Component: 100  -  total flux cleaned = 0.0639638 Jy
! Component: 150  -  total flux cleaned = 0.0807245 Jy
! Component: 200  -  total flux cleaned = 0.0928542 Jy
! Total flux subtracted in 200 components = 0.0928542 Jy
! Clean residual min=-0.013856 max=0.013369 Jy/beam
! Clean residual mean=0.000038 rms=0.003623 Jy/beam
! Combined flux in latest and established models = 0.654274 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 57 components and 0.654274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060804Jy  sigma=1.318537
! Fit after  self-cal, rms=0.060227Jy  sigma=1.304216
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.739 x 6.649 at 0.1105 degrees (North through East)
! Clean map  min=-0.013211  max=0.46065 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        0.99     KP        0.97     
!   LA        1.02     MK        1.01     NL        0.95     OV        0.93     
!   PT        0.91     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        1.03     KP        0.97     
!   LA        0.99     MK        1.04     NL        0.98     OV        0.97     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        1.03     KP        0.97     
!   LA        1.03     MK        1.04     NL        0.90     OV        0.94     
!   PT        0.91     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00*    HN        1.04     KP        0.93     
!   LA        0.97     MK        1.02     NL        1.02     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.060227Jy  sigma=1.304216
! Fit after  self-cal, rms=0.054375Jy  sigma=1.169799
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.778 mas, bmaj=6.664 mas, bpa=0.5989 degrees
! Estimated noise=1.50332 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00595774 Jy
! Component: 100  -  total flux cleaned = 0.00687939 Jy
! Component: 150  -  total flux cleaned = 0.00696647 Jy
! Component: 200  -  total flux cleaned = 0.00688467 Jy
! Total flux subtracted in 200 components = 0.00688467 Jy
! Clean residual min=-0.009583 max=0.009785 Jy/beam
! Clean residual mean=0.000013 rms=0.002530 Jy/beam
! Combined flux in latest and established models = 0.661159 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.661159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053710Jy  sigma=1.153807
! Fit after  self-cal, rms=0.053668Jy  sigma=1.152217
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053668Jy  sigma=1.152217
! Fit after  self-cal, rms=0.053449Jy  sigma=1.150779
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.78 mas, bmaj=6.67 mas, bpa=0.5569 degrees
! Estimated noise=1.49974 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013803 Jy
! Component: 100  -  total flux cleaned = 0.00128899 Jy
! Component: 150  -  total flux cleaned = 0.00122254 Jy
! Component: 200  -  total flux cleaned = 0.00122162 Jy
! Total flux subtracted in 200 components = 0.00122162 Jy
! Clean residual min=-0.009335 max=0.009281 Jy/beam
! Clean residual mean=0.000012 rms=0.002449 Jy/beam
! Combined flux in latest and established models = 0.66238 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 81 components and 0.66238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053255Jy  sigma=1.146382
! Fit after  self-cal, rms=0.053250Jy  sigma=1.145985
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000221632 Jy
! Component: 100  -  total flux cleaned = 0.000406091 Jy
! Component: 150  -  total flux cleaned = 0.000530196 Jy
! Component: 200  -  total flux cleaned = 0.000644593 Jy
! Total flux subtracted in 200 components = 0.000644593 Jy
! Clean residual min=-0.009161 max=0.009115 Jy/beam
! Clean residual mean=0.000012 rms=0.002432 Jy/beam
! Combined flux in latest and established models = 0.663025 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.663025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053184Jy  sigma=1.144443
! Fit after  self-cal, rms=0.053183Jy  sigma=1.144334
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053183Jy  sigma=1.144334
! Fit after  self-cal, rms=0.053086Jy  sigma=1.143687
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.783 mas, bmaj=6.678 mas, bpa=0.5095 degrees
! Estimated noise=1.49742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00076914 Jy
! Component: 100  -  total flux cleaned = -0.0011848 Jy
! Component: 150  -  total flux cleaned = -0.0013662 Jy
! Component: 200  -  total flux cleaned = -0.00139858 Jy
! Total flux subtracted in 200 components = -0.00139858 Jy
! Clean residual min=-0.009019 max=0.008883 Jy/beam
! Clean residual mean=0.000012 rms=0.002405 Jy/beam
! Combined flux in latest and established models = 0.661626 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 90 components and 0.661626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053010Jy  sigma=1.142474
! Fit after  self-cal, rms=0.053009Jy  sigma=1.142415
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.04982e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109747 Jy
! Component: 150  -  total flux cleaned = 0.000109834 Jy
! Component: 200  -  total flux cleaned = 0.000110103 Jy
! Total flux subtracted in 200 components = 0.000110103 Jy
! Clean residual min=-0.008943 max=0.008830 Jy/beam
! Clean residual mean=0.000012 rms=0.002399 Jy/beam
! Combined flux in latest and established models = 0.661736 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 92 components and 0.661736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052981Jy  sigma=1.141827
! Fit after  self-cal, rms=0.052982Jy  sigma=1.141806
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052982Jy  sigma=1.141806
! Fit after  self-cal, rms=0.052936Jy  sigma=1.141460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.915 mas, bmaj=9.453 mas, bpa=0.3098 degrees
! Estimated noise=2.07098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000515573 Jy
! Component: 100  -  total flux cleaned = -0.000652882 Jy
! Component: 150  -  total flux cleaned = -0.000596983 Jy
! Component: 200  -  total flux cleaned = -0.000545923 Jy
! Total flux subtracted in 200 components = -0.000545923 Jy
! Clean residual min=-0.016119 max=0.017908 Jy/beam
! Clean residual mean=0.000036 rms=0.005421 Jy/beam
! Combined flux in latest and established models = 0.661191 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 103 components and 0.66119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052933Jy  sigma=1.141755
! Fit after  self-cal, rms=0.052933Jy  sigma=1.141549
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.75762e-05 Jy
! Component: 100  -  total flux cleaned = 0.00010731 Jy
! Component: 150  -  total flux cleaned = 0.000250062 Jy
! Component: 200  -  total flux cleaned = 0.000282636 Jy
! Total flux subtracted in 200 components = 0.000282636 Jy
! Clean residual min=-0.016065 max=0.017730 Jy/beam
! Clean residual mean=0.000035 rms=0.005414 Jy/beam
! Combined flux in latest and established models = 0.661473 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 104 components and 0.661473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052963Jy  sigma=1.142491
! Fit after  self-cal, rms=0.052963Jy  sigma=1.142415
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.785 mas, bmaj=6.686 mas, bpa=0.4728 degrees
! Estimated noise=1.49572 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.785 x 6.686 at 0.4728 degrees (North through East)
! Clean map  min=-0.008687  max=0.4561 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.653 mas, bmaj=6.904 mas, bpa=-1.197 degrees
! Estimated noise=1.75241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.336741 Jy
! Component: 100  -  total flux cleaned = 0.445829 Jy
! Component: 150  -  total flux cleaned = 0.509836 Jy
! Component: 200  -  total flux cleaned = 0.552588 Jy
! Total flux subtracted in 200 components = 0.552588 Jy
! Clean residual min=-0.017064 max=0.023762 Jy/beam
! Clean residual mean=0.000032 rms=0.005119 Jy/beam
! Combined flux in latest and established models = 0.552588 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.552588 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.785 mas, bmaj=6.686 mas, bpa=0.4728 degrees
! Estimated noise=1.49572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344607 Jy
! Component: 100  -  total flux cleaned = 0.0565308 Jy
! Component: 150  -  total flux cleaned = 0.0711554 Jy
! Component: 200  -  total flux cleaned = 0.0812901 Jy
! Total flux subtracted in 200 components = 0.0812901 Jy
! Clean residual min=-0.010647 max=0.010429 Jy/beam
! Clean residual mean=0.000026 rms=0.002809 Jy/beam
! Combined flux in latest and established models = 0.633878 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 39 components and 0.633878 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.915 mas, bmaj=9.453 mas, bpa=0.3098 degrees
! Estimated noise=2.07098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132518 Jy
! Component: 100  -  total flux cleaned = 0.0198803 Jy
! Component: 150  -  total flux cleaned = 0.0238425 Jy
! Component: 200  -  total flux cleaned = 0.0259194 Jy
! Total flux subtracted in 200 components = 0.0259194 Jy
! Clean residual min=-0.016759 max=0.019149 Jy/beam
! Clean residual mean=0.000038 rms=0.005510 Jy/beam
! Combined flux in latest and established models = 0.659798 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00067505 Jy
! Component: 100  -  total flux cleaned = 0.00104939 Jy
! Component: 150  -  total flux cleaned = 0.00121784 Jy
! Component: 200  -  total flux cleaned = 0.00132348 Jy
! Total flux subtracted in 200 components = 0.00132348 Jy
! Clean residual min=-0.016484 max=0.018542 Jy/beam
! Clean residual mean=0.000036 rms=0.005470 Jy/beam
! Combined flux in latest and established models = 0.661121 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 77 components and 0.661121 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.785 mas, bmaj=6.686 mas, bpa=0.4728 degrees
! Estimated noise=1.49572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.87933e-05 Jy
! Component: 100  -  total flux cleaned = 0.000321717 Jy
! Component: 150  -  total flux cleaned = 0.000401419 Jy
! Component: 200  -  total flux cleaned = 0.000217108 Jy
! Total flux subtracted in 200 components = 0.000217108 Jy
! Clean residual min=-0.009003 max=0.009151 Jy/beam
! Clean residual mean=0.000011 rms=0.002430 Jy/beam
! Combined flux in latest and established models = 0.661338 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 89 components and 0.661338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053101Jy  sigma=1.144940
! Fit after  self-cal, rms=0.053071Jy  sigma=1.144583
wmodel /scr/pima/bg219h_uvs/J0725+1425_S_map.mod
! Writing 89 model components to file: /scr/pima/bg219h_uvs/J0725+1425_S_map.mod
wobs /scr/pima/bg219h_uvs/J0725+1425_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0725+1425_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J0725+1425_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219h_uvs/J0725+1425_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000835752 Jy
! Component: 100  -  total flux cleaned = -0.00128505 Jy
! Component: 150  -  total flux cleaned = -0.0012918 Jy
! Component: 200  -  total flux cleaned = -0.000913401 Jy
! Component: 250  -  total flux cleaned = -0.000675473 Jy
! Component: 300  -  total flux cleaned = -0.000563841 Jy
! Component: 350  -  total flux cleaned = -0.000243523 Jy
! Component: 400  -  total flux cleaned = -4.44465e-05 Jy
! Component: 450  -  total flux cleaned = 0.00014721 Jy
! Component: 500  -  total flux cleaned = 0.000238097 Jy
! Component: 550  -  total flux cleaned = 0.000236485 Jy
! Component: 600  -  total flux cleaned = 0.000318667 Jy
! Component: 650  -  total flux cleaned = 0.000237538 Jy
! Component: 700  -  total flux cleaned = 0.000316575 Jy
! Component: 750  -  total flux cleaned = 0.000393856 Jy
! Component: 800  -  total flux cleaned = 0.000539697 Jy
! Component: 850  -  total flux cleaned = 0.000468723 Jy
! Component: 900  -  total flux cleaned = 0.000399171 Jy
! Component: 950  -  total flux cleaned = 0.00020004 Jy
! Component: 1000  -  total flux cleaned = 7.20334e-05 Jy
! Component: 1050  -  total flux cleaned = 9.35669e-06 Jy
! Component: 1100  -  total flux cleaned = 9.81129e-06 Jy
! Component: 1150  -  total flux cleaned = -4.83189e-05 Jy
! Component: 1200  -  total flux cleaned = 7.44298e-06 Jy
! Component: 1250  -  total flux cleaned = 7.29455e-06 Jy
! Component: 1300  -  total flux cleaned = 7.10064e-06 Jy
! Component: 1350  -  total flux cleaned = -9.83905e-05 Jy
! Component: 1400  -  total flux cleaned = 3.7627e-06 Jy
! Component: 1450  -  total flux cleaned = -0.000146025 Jy
! Component: 1500  -  total flux cleaned = 1.04089e-06 Jy
! Component: 1550  -  total flux cleaned = 4.83468e-05 Jy
! Component: 1600  -  total flux cleaned = 9.41423e-05 Jy
! Component: 1650  -  total flux cleaned = 0.00013903 Jy
! Component: 1700  -  total flux cleaned = 0.000227432 Jy
! Component: 1750  -  total flux cleaned = 0.000270868 Jy
! Component: 1800  -  total flux cleaned = 0.000399331 Jy
! Component: 1850  -  total flux cleaned = 0.000524245 Jy
! Component: 1900  -  total flux cleaned = 0.000646997 Jy
! Component: 1950  -  total flux cleaned = 0.000726716 Jy
! Component: 2000  -  total flux cleaned = 0.000923057 Jy
! Component: 2050  -  total flux cleaned = 0.00107783 Jy
! Component: 2100  -  total flux cleaned = 0.00122933 Jy
! Component: 2150  -  total flux cleaned = 0.00134141 Jy
! Component: 2200  -  total flux cleaned = 0.00137835 Jy
! Component: 2250  -  total flux cleaned = 0.00145165 Jy
! Component: 2300  -  total flux cleaned = 0.00159464 Jy
! Component: 2350  -  total flux cleaned = 0.00170006 Jy
! Component: 2400  -  total flux cleaned = 0.00180422 Jy
! Component: 2450  -  total flux cleaned = 0.00187274 Jy
! Component: 2500  -  total flux cleaned = 0.00194066 Jy
! Component: 2550  -  total flux cleaned = 0.00210692 Jy
! Component: 2600  -  total flux cleaned = 0.00210694 Jy
! Component: 2650  -  total flux cleaned = 0.00220473 Jy
! Component: 2700  -  total flux cleaned = 0.00223691 Jy
! Component: 2750  -  total flux cleaned = 0.00233188 Jy
! Component: 2800  -  total flux cleaned = 0.00233212 Jy
! Component: 2850  -  total flux cleaned = 0.0024255 Jy
! Component: 2900  -  total flux cleaned = 0.00251702 Jy
! Component: 2950  -  total flux cleaned = 0.00251727 Jy
! Component: 3000  -  total flux cleaned = 0.00251715 Jy
! Component: 3050  -  total flux cleaned = 0.00251724 Jy
! Component: 3100  -  total flux cleaned = 0.00257631 Jy
! Component: 3150  -  total flux cleaned = 0.00263449 Jy
! Component: 3200  -  total flux cleaned = 0.00260545 Jy
! Component: 3250  -  total flux cleaned = 0.00257676 Jy
! Component: 3300  -  total flux cleaned = 0.00260512 Jy
! Component: 3350  -  total flux cleaned = 0.00254849 Jy
! Component: 3400  -  total flux cleaned = 0.00254856 Jy
! Component: 3450  -  total flux cleaned = 0.00257623 Jy
! Component: 3500  -  total flux cleaned = 0.00249353 Jy
! Component: 3550  -  total flux cleaned = 0.00238426 Jy
! Component: 3600  -  total flux cleaned = 0.00232983 Jy
! Component: 3650  -  total flux cleaned = 0.00224852 Jy
! Component: 3700  -  total flux cleaned = 0.0021406 Jy
! Component: 3750  -  total flux cleaned = 0.00208687 Jy
! Component: 3800  -  total flux cleaned = 0.0019534 Jy
! Component: 3850  -  total flux cleaned = 0.00184718 Jy
! Component: 3900  -  total flux cleaned = 0.00171507 Jy
! Component: 3950  -  total flux cleaned = 0.0016362 Jy
! Component: 4000  -  total flux cleaned = 0.00163614 Jy
! Component: 4050  -  total flux cleaned = 0.00153168 Jy
! Total flux subtracted in 4096 components = 0.00145355 Jy
! Clean residual min=-0.001577 max=0.002409 Jy/beam
! Clean residual mean=0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.662792 Jy
keep
! Adding 365 model components to the UV plane model.
! The established model now contains 454 components and 0.662791 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0725+1425_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.785 x 6.686 at 0.4728 degrees (North through East)
! Clean map  min=-0.0051043  max=0.45611 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0725+1425_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.456114 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000433424 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.285076 0.285076 0.570152 1.1403 2.28061 4.56121 9.12243 18.2449 36.4897 72.9794
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.456 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1052.35 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0725+1425_S_uvs.log closed on Thu Apr  7 08:56:11 2016