! Started logfile: /scr/pima/bg219h_uvs/J0650-0840_X_dfm.log on Thu May 19 22:13:23 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0650-0840_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0650-0840_X_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.69636 visibilities/baseline/integration-bin.
! Found source: J0650-0840
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17448 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0650-0840_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 74 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006962Jy  sigma=23.687141
! Fit after  self-cal, rms=0.923590Jy  sigma=21.690053
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6931 mas, bmaj=1.759 mas, bpa=2.479 degrees
! Estimated noise=0.394045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0611436 Jy
! Component: 100  -  total flux cleaned = 0.0761063 Jy
! Total flux subtracted in 100 components = 0.0761063 Jy
! Clean residual min=-0.007041 max=0.024854 Jy/beam
! Clean residual mean=-0.000005 rms=0.002015 Jy/beam
! Combined flux in latest and established models = 0.0761063 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0761063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073013Jy  sigma=1.571280
! Fit after  self-cal, rms=0.071728Jy  sigma=1.544220
! Inverting map 
! Added new window around map position (3.4, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205367 Jy
! Component: 100  -  total flux cleaned = 0.0289628 Jy
! Total flux subtracted in 100 components = 0.0289628 Jy
! Clean residual min=-0.004376 max=0.005870 Jy/beam
! Clean residual mean=-0.000003 rms=0.001099 Jy/beam
! Combined flux in latest and established models = 0.105069 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.105069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065960Jy  sigma=1.404968
! Fit after  self-cal, rms=0.064700Jy  sigma=1.377908
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00864489 Jy
! Component: 100  -  total flux cleaned = 0.0136409 Jy
! Total flux subtracted in 100 components = 0.0136409 Jy
! Clean residual min=-0.003176 max=0.004045 Jy/beam
! Clean residual mean=-0.000002 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.11871 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 23 components and 0.11871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063429Jy  sigma=1.348353
! Fit after  self-cal, rms=0.063268Jy  sigma=1.344736
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.843 mas, bmaj=2.038 mas, bpa=1.488 degrees
! Estimated noise=0.238698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00485038 Jy
! Component: 100  -  total flux cleaned = 0.00785131 Jy
! Component: 150  -  total flux cleaned = 0.00998878 Jy
! Component: 200  -  total flux cleaned = 0.0115401 Jy
! Total flux subtracted in 200 components = 0.0115401 Jy
! Clean residual min=-0.002110 max=0.002207 Jy/beam
! Clean residual mean=-0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.13025 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 0.13025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062795Jy  sigma=1.334646
! Fit after  self-cal, rms=0.062741Jy  sigma=1.333421
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.843 x 2.038 at 1.488 degrees (North through East)
! Clean map  min=-0.001912  max=0.080256 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.92     KP        0.98     
!   MK        1.06     NL        1.00     OV        1.02     PT        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.88     KP        0.96     
!   MK        1.04     NL        1.00     OV        1.04     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.95     KP        1.01     
!   MK        1.08     NL        0.97     OV        0.99     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.89     KP        0.94     
!   MK        1.06     NL        1.00     OV        1.02     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.98     KP        1.01     
!   MK        1.01     NL        1.00     OV        1.03     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.88     KP        1.04     
!   MK        1.02     NL        1.02     OV        1.00     PT        1.02     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.95     KP        0.95     
!   MK        1.12     NL        0.99     OV        1.02     PT        1.04     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.97     KP        0.97     
!   MK        1.05     NL        1.04     OV        0.98     PT        0.99     
!   SC        1.09     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.87     KP        1.00     
!   MK        1.01     NL        1.04     OV        1.03     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.86     KP        1.05     
!   MK        1.03     NL        1.04     OV        0.98     PT        1.03     
!   SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.84     KP        1.01     
!   MK        1.02     NL        1.04     OV        1.02     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.93     HN        0.90     KP        0.99     
!   MK        1.12     NL        1.02     OV        1.00     PT        1.05     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.062741Jy  sigma=1.333421
! Fit after  self-cal, rms=0.060432Jy  sigma=1.328309
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8508 mas, bmaj=2.052 mas, bpa=1.554 degrees
! Estimated noise=0.236193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125496 Jy
! Component: 100  -  total flux cleaned = 0.00122281 Jy
! Component: 150  -  total flux cleaned = 0.00122278 Jy
! Component: 200  -  total flux cleaned = 0.00134104 Jy
! Total flux subtracted in 200 components = 0.00134104 Jy
! Clean residual min=-0.001268 max=0.001438 Jy/beam
! Clean residual mean=-0.000000 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.131591 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.131591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060372Jy  sigma=1.326988
! Fit after  self-cal, rms=0.060328Jy  sigma=1.326541
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060328Jy  sigma=1.326541
! Fit after  self-cal, rms=0.060259Jy  sigma=1.324430
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8526 mas, bmaj=2.055 mas, bpa=1.563 degrees
! Estimated noise=0.236222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498556 Jy
! Component: 100  -  total flux cleaned = 0.000517597 Jy
! Component: 150  -  total flux cleaned = 0.000617143 Jy
! Component: 200  -  total flux cleaned = 0.000669964 Jy
! Total flux subtracted in 200 components = 0.000669964 Jy
! Clean residual min=-0.001232 max=0.001326 Jy/beam
! Clean residual mean=-0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.132261 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.132261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060241Jy  sigma=1.324046
! Fit after  self-cal, rms=0.060245Jy  sigma=1.323909
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.4, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000983198 Jy
! Component: 100  -  total flux cleaned = 0.00105472 Jy
! Component: 150  -  total flux cleaned = 0.0010942 Jy
! Component: 200  -  total flux cleaned = 0.00111243 Jy
! Total flux subtracted in 200 components = 0.00111243 Jy
! Clean residual min=-0.001177 max=0.001086 Jy/beam
! Clean residual mean=-0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.133374 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.133374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060219Jy  sigma=1.323385
! Fit after  self-cal, rms=0.060211Jy  sigma=1.323272
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060211Jy  sigma=1.323272
! Fit after  self-cal, rms=0.059874Jy  sigma=1.323319
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8523 mas, bmaj=2.057 mas, bpa=1.51 degrees
! Estimated noise=0.234941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.26567e-05 Jy
! Component: 100  -  total flux cleaned = -6.49899e-05 Jy
! Component: 150  -  total flux cleaned = -0.000102573 Jy
! Component: 200  -  total flux cleaned = -0.000168421 Jy
! Total flux subtracted in 200 components = -0.000168421 Jy
! Clean residual min=-0.001136 max=0.001112 Jy/beam
! Clean residual mean=-0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.133205 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 62 components and 0.133205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059859Jy  sigma=1.323019
! Fit after  self-cal, rms=0.059852Jy  sigma=1.322807
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.71774e-05 Jy
! Component: 100  -  total flux cleaned = 6.69835e-05 Jy
! Component: 150  -  total flux cleaned = 6.68251e-05 Jy
! Component: 200  -  total flux cleaned = 8.07083e-05 Jy
! Total flux subtracted in 200 components = 8.07083e-05 Jy
! Clean residual min=-0.001146 max=0.001136 Jy/beam
! Clean residual mean=-0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.133286 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 0.133286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059844Jy  sigma=1.322667
! Fit after  self-cal, rms=0.059844Jy  sigma=1.322659
! Inverting map 
! Added new window around map position (-50.6, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000708119 Jy
! Component: 100  -  total flux cleaned = 0.000858303 Jy
! Component: 150  -  total flux cleaned = 0.000928006 Jy
! Component: 200  -  total flux cleaned = 0.000912723 Jy
! Total flux subtracted in 200 components = 0.000912723 Jy
! Clean residual min=-0.001101 max=0.001081 Jy/beam
! Clean residual mean=-0.000000 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.134199 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 80 components and 0.134199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059823Jy  sigma=1.322254
! Fit after  self-cal, rms=0.059822Jy  sigma=1.322208
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059822Jy  sigma=1.322208
! Fit after  self-cal, rms=0.059538Jy  sigma=1.322208
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.909 mas, bmaj=3.327 mas, bpa=3.647 degrees
! Estimated noise=0.298362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.24552e-05 Jy
! Component: 100  -  total flux cleaned = 0.000344469 Jy
! Component: 150  -  total flux cleaned = 0.000577028 Jy
! Component: 200  -  total flux cleaned = 0.000734958 Jy
! Total flux subtracted in 200 components = 0.000734958 Jy
! Clean residual min=-0.000980 max=0.001231 Jy/beam
! Clean residual mean=-0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.134934 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 92 components and 0.134934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059536Jy  sigma=1.322118
! Fit after  self-cal, rms=0.059534Jy  sigma=1.322078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.3432e-05 Jy
! Component: 100  -  total flux cleaned = 0.000170376 Jy
! Component: 150  -  total flux cleaned = 0.00028182 Jy
! Component: 200  -  total flux cleaned = 0.000360105 Jy
! Total flux subtracted in 200 components = 0.000360105 Jy
! Clean residual min=-0.000981 max=0.001195 Jy/beam
! Clean residual mean=-0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.135294 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.135294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059534Jy  sigma=1.322066
! Fit after  self-cal, rms=0.059533Jy  sigma=1.322044
! Inverting map 
! Added new window around map position (36.8, -28).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000541425 Jy
! Component: 100  -  total flux cleaned = 0.000230103 Jy
! Component: 150  -  total flux cleaned = 8.18478e-05 Jy
! Component: 200  -  total flux cleaned = -9.94127e-06 Jy
! Total flux subtracted in 200 components = -9.94127e-06 Jy
! Clean residual min=-0.000903 max=0.001142 Jy/beam
! Clean residual mean=-0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.135284 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 131 components and 0.135284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059520Jy  sigma=1.321710
! Fit after  self-cal, rms=0.059518Jy  sigma=1.321668
! Inverting map 
! Added new window around map position (-36.2, -51.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00094611 Jy
! Component: 100  -  total flux cleaned = 0.00133006 Jy
! Component: 150  -  total flux cleaned = 0.00148569 Jy
! Component: 200  -  total flux cleaned = 0.00148651 Jy
! Total flux subtracted in 200 components = 0.00148651 Jy
! Clean residual min=-0.001001 max=0.000814 Jy/beam
! Clean residual mean=-0.000001 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.13677 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 152 components and 0.13677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059511Jy  sigma=1.321466
! Fit after  self-cal, rms=0.059508Jy  sigma=1.321406
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.852 mas, bmaj=2.058 mas, bpa=1.464 degrees
! Estimated noise=0.233861 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.852 x 2.058 at 1.464 degrees (North through East)
! Clean map  min=-0.00088415  max=0.078781 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7029 mas, bmaj=1.775 mas, bpa=2.591 degrees
! Estimated noise=0.387005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0626398 Jy
! Component: 100  -  total flux cleaned = 0.0882423 Jy
! Component: 150  -  total flux cleaned = 0.101682 Jy
! Component: 200  -  total flux cleaned = 0.109881 Jy
! Total flux subtracted in 200 components = 0.109881 Jy
! Clean residual min=-0.002993 max=0.004318 Jy/beam
! Clean residual mean=-0.000002 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.109881 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.109881 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.852 mas, bmaj=2.058 mas, bpa=1.464 degrees
! Estimated noise=0.233861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668513 Jy
! Component: 100  -  total flux cleaned = 0.0108784 Jy
! Component: 150  -  total flux cleaned = 0.0137602 Jy
! Component: 200  -  total flux cleaned = 0.0159607 Jy
! Total flux subtracted in 200 components = 0.0159607 Jy
! Clean residual min=-0.001502 max=0.001686 Jy/beam
! Clean residual mean=-0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.125841 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 38 components and 0.125841 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.909 mas, bmaj=3.327 mas, bpa=3.647 degrees
! Estimated noise=0.298362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269548 Jy
! Component: 100  -  total flux cleaned = 0.00431567 Jy
! Component: 150  -  total flux cleaned = 0.00551345 Jy
! Component: 200  -  total flux cleaned = 0.00633885 Jy
! Total flux subtracted in 200 components = 0.00633885 Jy
! Clean residual min=-0.001169 max=0.001196 Jy/beam
! Clean residual mean=-0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.13218 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000709479 Jy
! Component: 100  -  total flux cleaned = 0.00118104 Jy
! Component: 150  -  total flux cleaned = 0.00156223 Jy
! Component: 200  -  total flux cleaned = 0.00192711 Jy
! Total flux subtracted in 200 components = 0.00192711 Jy
! Clean residual min=-0.001019 max=0.000993 Jy/beam
! Clean residual mean=-0.000002 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.134107 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 87 components and 0.134107 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.852 mas, bmaj=2.058 mas, bpa=1.464 degrees
! Estimated noise=0.233861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000597874 Jy
! Component: 100  -  total flux cleaned = 0.000745627 Jy
! Component: 150  -  total flux cleaned = 0.00077853 Jy
! Component: 200  -  total flux cleaned = 0.000937787 Jy
! Total flux subtracted in 200 components = 0.000937787 Jy
! Clean residual min=-0.001056 max=0.001107 Jy/beam
! Clean residual mean=-0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.135045 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 110 components and 0.135045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059551Jy  sigma=1.322219
! Fit after  self-cal, rms=0.059541Jy  sigma=1.322084
wmodel /J0650-0840_X_map.mod
! wmodel: Unable to open new model file: /J0650-0840_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0650-0840_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.852 x 2.058 at 1.464 degrees (North through East)
! Clean map  min=-0.00090678  max=0.078277 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0650-0840_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0782774 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000252013 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.965845 0.965845 1.93169 3.86338 7.72676 15.4535 30.907 61.8141
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.078 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  310.608 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0650-0840_X_dfm.log closed on Thu May 19 22:13:26 2016