! Started logfile: /scr/pima/bg219h_uvs/J0637-1052_X_uvs.log on Thu Apr  7 12:03:13 2016
obs /scr/pima/bg219h_uvs/J0637-1052_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0637-1052_X_uva.fits
! AN table 1: 31 integrations on 28 of 28 possible baselines.
! AN table 2: 30 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.917351 visibilities/baseline/integration-bin.
! Found source: J0637-1052
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21444 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0637-1052_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.004492Jy  sigma=24.970266
! Fit after  self-cal, rms=0.939584Jy  sigma=23.364479
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7108 mas, bmaj=1.843 mas, bpa=1.723 degrees
! Estimated noise=0.431838 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0462321 Jy
! Component: 100  -  total flux cleaned = 0.0575143 Jy
! Total flux subtracted in 100 components = 0.0575143 Jy
! Clean residual min=-0.003599 max=0.004334 Jy/beam
! Clean residual mean=-0.000005 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.0575143 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0575143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061971Jy  sigma=1.439316
! Fit after  self-cal, rms=0.060509Jy  sigma=1.403334
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00628945 Jy
! Component: 100  -  total flux cleaned = 0.0097021 Jy
! Total flux subtracted in 100 components = 0.0097021 Jy
! Clean residual min=-0.002711 max=0.003139 Jy/beam
! Clean residual mean=-0.000002 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.0672164 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 21 components and 0.0672164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059720Jy  sigma=1.382880
! Fit after  self-cal, rms=0.059722Jy  sigma=1.382437
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8387 mas, bmaj=2.152 mas, bpa=0.8966 degrees
! Estimated noise=0.272057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00284612 Jy
! Component: 100  -  total flux cleaned = 0.00429941 Jy
! Component: 150  -  total flux cleaned = 0.0050189 Jy
! Component: 200  -  total flux cleaned = 0.00499836 Jy
! Total flux subtracted in 200 components = 0.00499836 Jy
! Clean residual min=-0.002288 max=0.003314 Jy/beam
! Clean residual mean=-0.000001 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.0722148 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.0722148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059582Jy  sigma=1.379387
! Fit after  self-cal, rms=0.059587Jy  sigma=1.379255
! Inverting map 
! Added new window around map position (0.8, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314253 Jy
! Component: 100  -  total flux cleaned = 0.00495435 Jy
! Component: 150  -  total flux cleaned = 0.00596595 Jy
! Component: 200  -  total flux cleaned = 0.00614177 Jy
! Total flux subtracted in 200 components = 0.00614177 Jy
! Clean residual min=-0.001900 max=0.001839 Jy/beam
! Clean residual mean=-0.000001 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0783566 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 53 components and 0.0783566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059404Jy  sigma=1.374734
! Fit after  self-cal, rms=0.059356Jy  sigma=1.373850
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8387 x 2.152 at 0.8966 degrees (North through East)
! Clean map  min=-0.0017853  max=0.062903 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.97     KP        1.02     
!   LA        0.96     NL        1.09     OV        0.94     SC        1.13     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.00     HN        0.85     KP        1.00     
!   MK        1.04     NL        0.98     OV        1.05     PT        0.98     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.91     KP        1.09     
!   LA        0.93     NL        1.04     OV        1.05     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        1.06     HN        0.92     KP        1.00     
!   MK        1.06     NL        1.03     OV        1.04     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.94     HN        0.93     KP        1.03     
!   LA        0.95     NL        1.03     OV        1.01     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.03     HN        0.92     KP        0.94     
!   MK        1.06     NL        0.99     OV        1.01     PT        1.16     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     HN        0.86     KP        1.05     
!   LA        0.94     NL        0.98     OV        1.05     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.94     HN        0.94     KP        1.07     
!   MK        1.07     NL        0.97     OV        1.00     PT        1.01     
!   SC        0.95     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     HN        0.85     KP        1.00     
!   LA        1.03     NL        1.05     OV        1.07     SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.02     HN        0.88     KP        1.03     
!   MK        0.95     NL        1.07     OV        1.05     PT        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.92     HN        0.88     KP        1.03     
!   LA        0.91     NL        1.00     OV        1.09     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.95     HN        0.95     KP        1.06     
!   MK        0.96     NL        0.95     OV        1.00     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.93     KP        0.99     
!   LA        1.01     NL        0.97     OV        1.06     SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.91     HN        0.86     KP        0.97     
!   MK        0.94     NL        1.04     OV        1.14     PT        0.98     
!   SC        1.16     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059356Jy  sigma=1.373850
! Fit after  self-cal, rms=0.057727Jy  sigma=1.367773
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8363 mas, bmaj=2.151 mas, bpa=0.6789 degrees
! Estimated noise=0.270062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000969567 Jy
! Component: 100  -  total flux cleaned = 0.00136148 Jy
! Component: 150  -  total flux cleaned = 0.00159379 Jy
! Component: 200  -  total flux cleaned = 0.00173624 Jy
! Total flux subtracted in 200 components = 0.00173624 Jy
! Clean residual min=-0.001345 max=0.001570 Jy/beam
! Clean residual mean=0.000002 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.0800928 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 72 components and 0.0800928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057700Jy  sigma=1.367238
! Fit after  self-cal, rms=0.057689Jy  sigma=1.366821
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057689Jy  sigma=1.366821
! Fit after  self-cal, rms=0.057736Jy  sigma=1.366783
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8358 mas, bmaj=2.15 mas, bpa=0.6545 degrees
! Estimated noise=0.270395 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495818 Jy
! Component: 100  -  total flux cleaned = 0.000707178 Jy
! Component: 150  -  total flux cleaned = 0.000810217 Jy
! Component: 200  -  total flux cleaned = 0.000889193 Jy
! Total flux subtracted in 200 components = 0.000889193 Jy
! Clean residual min=-0.001274 max=0.001575 Jy/beam
! Clean residual mean=0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.080982 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 81 components and 0.080982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057724Jy  sigma=1.366545
! Fit after  self-cal, rms=0.057724Jy  sigma=1.366529
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.6, 44.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110294 Jy
! Component: 100  -  total flux cleaned = 0.00112679 Jy
! Component: 150  -  total flux cleaned = 0.00112671 Jy
! Component: 200  -  total flux cleaned = 0.00114723 Jy
! Total flux subtracted in 200 components = 0.00114723 Jy
! Clean residual min=-0.001271 max=0.001234 Jy/beam
! Clean residual mean=0.000001 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0821292 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 97 components and 0.0821292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057687Jy  sigma=1.365720
! Fit after  self-cal, rms=0.057685Jy  sigma=1.365627
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057685Jy  sigma=1.365627
! Fit after  self-cal, rms=0.057702Jy  sigma=1.365557
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8348 mas, bmaj=2.149 mas, bpa=0.6097 degrees
! Estimated noise=0.270729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000659086 Jy
! Component: 100  -  total flux cleaned = 0.000776122 Jy
! Component: 150  -  total flux cleaned = 0.000848263 Jy
! Component: 200  -  total flux cleaned = 0.000933958 Jy
! Total flux subtracted in 200 components = 0.000933958 Jy
! Clean residual min=-0.001241 max=0.001184 Jy/beam
! Clean residual mean=0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.0830632 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 101 components and 0.0830632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057687Jy  sigma=1.365237
! Fit after  self-cal, rms=0.057685Jy  sigma=1.365213
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172959 Jy
! Component: 100  -  total flux cleaned = 0.000221477 Jy
! Component: 150  -  total flux cleaned = 0.000252273 Jy
! Component: 200  -  total flux cleaned = 0.000267386 Jy
! Total flux subtracted in 200 components = 0.000267386 Jy
! Clean residual min=-0.001280 max=0.001181 Jy/beam
! Clean residual mean=0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0833306 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 109 components and 0.0833306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057676Jy  sigma=1.365041
! Fit after  self-cal, rms=0.057676Jy  sigma=1.365036
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057676Jy  sigma=1.365036
! Fit after  self-cal, rms=0.057718Jy  sigma=1.364995
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.001 mas, bmaj=3.565 mas, bpa=0.8344 degrees
! Estimated noise=0.350431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203264 Jy
! Component: 100  -  total flux cleaned = 0.000423119 Jy
! Component: 150  -  total flux cleaned = 0.000493719 Jy
! Component: 200  -  total flux cleaned = 0.000506635 Jy
! Total flux subtracted in 200 components = 0.000506635 Jy
! Clean residual min=-0.001385 max=0.001380 Jy/beam
! Clean residual mean=0.000002 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.0838372 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 118 components and 0.0838372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057712Jy  sigma=1.364912
! Fit after  self-cal, rms=0.057712Jy  sigma=1.364899
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.91384e-05 Jy
! Component: 100  -  total flux cleaned = 5.94233e-05 Jy
! Component: 150  -  total flux cleaned = 6.95684e-05 Jy
! Component: 200  -  total flux cleaned = 8.82477e-05 Jy
! Total flux subtracted in 200 components = 8.82477e-05 Jy
! Clean residual min=-0.001379 max=0.001387 Jy/beam
! Clean residual mean=0.000003 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.0839254 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 123 components and 0.0839255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057709Jy  sigma=1.364878
! Fit after  self-cal, rms=0.057709Jy  sigma=1.364872
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8342 mas, bmaj=2.148 mas, bpa=0.5826 degrees
! Estimated noise=0.270999 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8342 x 2.148 at 0.5826 degrees (North through East)
! Clean map  min=-0.0011199  max=0.062442 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.707 mas, bmaj=1.846 mas, bpa=1.228 degrees
! Estimated noise=0.427749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0470361 Jy
! Component: 100  -  total flux cleaned = 0.0594625 Jy
! Component: 150  -  total flux cleaned = 0.0649593 Jy
! Component: 200  -  total flux cleaned = 0.0684985 Jy
! Total flux subtracted in 200 components = 0.0684985 Jy
! Clean residual min=-0.002667 max=0.002736 Jy/beam
! Clean residual mean=-0.000001 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.0684985 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0684985 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8342 mas, bmaj=2.148 mas, bpa=0.5826 degrees
! Estimated noise=0.270999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377478 Jy
! Component: 100  -  total flux cleaned = 0.00649596 Jy
! Component: 150  -  total flux cleaned = 0.00861695 Jy
! Component: 200  -  total flux cleaned = 0.0102948 Jy
! Total flux subtracted in 200 components = 0.0102948 Jy
! Clean residual min=-0.001677 max=0.001414 Jy/beam
! Clean residual mean=-0.000000 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.0787933 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 46 components and 0.0787933 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.001 mas, bmaj=3.565 mas, bpa=0.8344 degrees
! Estimated noise=0.350431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020307 Jy
! Component: 100  -  total flux cleaned = 0.00295674 Jy
! Component: 150  -  total flux cleaned = 0.00342821 Jy
! Component: 200  -  total flux cleaned = 0.00373564 Jy
! Total flux subtracted in 200 components = 0.00373564 Jy
! Clean residual min=-0.001514 max=0.001381 Jy/beam
! Clean residual mean=0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.0825289 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157799 Jy
! Component: 100  -  total flux cleaned = 0.000296027 Jy
! Component: 150  -  total flux cleaned = 0.000366918 Jy
! Component: 200  -  total flux cleaned = 0.00043265 Jy
! Total flux subtracted in 200 components = 0.00043265 Jy
! Clean residual min=-0.001413 max=0.001349 Jy/beam
! Clean residual mean=0.000002 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0829616 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 83 components and 0.0829616 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8342 mas, bmaj=2.148 mas, bpa=0.5826 degrees
! Estimated noise=0.270999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.67352e-05 Jy
! Component: 100  -  total flux cleaned = 0.000284069 Jy
! Component: 150  -  total flux cleaned = 0.00037221 Jy
! Component: 200  -  total flux cleaned = 0.000397529 Jy
! Total flux subtracted in 200 components = 0.000397529 Jy
! Clean residual min=-0.001238 max=0.001212 Jy/beam
! Clean residual mean=0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.0833591 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.0833591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057734Jy  sigma=1.365491
! Fit after  self-cal, rms=0.057729Jy  sigma=1.365374
wmodel /scr/pima/bg219h_uvs/J0637-1052_X_map.mod
! Writing 99 model components to file: /scr/pima/bg219h_uvs/J0637-1052_X_map.mod
wobs /scr/pima/bg219h_uvs/J0637-1052_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0637-1052_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J0637-1052_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J0637-1052_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.37383e-05 Jy
! Component: 100  -  total flux cleaned = -0.000108272 Jy
! Component: 150  -  total flux cleaned = -4.72334e-05 Jy
! Component: 200  -  total flux cleaned = -8.65861e-06 Jy
! Component: 250  -  total flux cleaned = 6.59105e-05 Jy
! Component: 300  -  total flux cleaned = 0.000101911 Jy
! Component: 350  -  total flux cleaned = 0.000172045 Jy
! Component: 400  -  total flux cleaned = 0.000171815 Jy
! Component: 450  -  total flux cleaned = 0.000138461 Jy
! Component: 500  -  total flux cleaned = 0.000122479 Jy
! Component: 550  -  total flux cleaned = 0.000186216 Jy
! Component: 600  -  total flux cleaned = 0.000217467 Jy
! Component: 650  -  total flux cleaned = 0.000233019 Jy
! Component: 700  -  total flux cleaned = 0.000278238 Jy
! Component: 750  -  total flux cleaned = 0.000337409 Jy
! Component: 800  -  total flux cleaned = 0.000366324 Jy
! Component: 850  -  total flux cleaned = 0.000451591 Jy
! Component: 900  -  total flux cleaned = 0.000493094 Jy
! Component: 950  -  total flux cleaned = 0.000547628 Jy
! Component: 1000  -  total flux cleaned = 0.000534311 Jy
! Component: 1050  -  total flux cleaned = 0.000600496 Jy
! Component: 1100  -  total flux cleaned = 0.000678665 Jy
! Component: 1150  -  total flux cleaned = 0.000691462 Jy
! Component: 1200  -  total flux cleaned = 0.000767153 Jy
! Component: 1250  -  total flux cleaned = 0.000817184 Jy
! Component: 1300  -  total flux cleaned = 0.00091549 Jy
! Component: 1350  -  total flux cleaned = 0.000963887 Jy
! Component: 1400  -  total flux cleaned = 0.00103515 Jy
! Component: 1450  -  total flux cleaned = 0.00110579 Jy
! Component: 1500  -  total flux cleaned = 0.00117547 Jy
! Component: 1550  -  total flux cleaned = 0.00124425 Jy
! Component: 1600  -  total flux cleaned = 0.00124429 Jy
! Component: 1650  -  total flux cleaned = 0.00134482 Jy
! Component: 1700  -  total flux cleaned = 0.00135587 Jy
! Component: 1750  -  total flux cleaned = 0.0014214 Jy
! Component: 1800  -  total flux cleaned = 0.0014861 Jy
! Component: 1850  -  total flux cleaned = 0.00153954 Jy
! Component: 1900  -  total flux cleaned = 0.00161325 Jy
! Component: 1950  -  total flux cleaned = 0.0016656 Jy
! Component: 2000  -  total flux cleaned = 0.00173787 Jy
! Component: 2050  -  total flux cleaned = 0.00176843 Jy
! Component: 2100  -  total flux cleaned = 0.00177858 Jy
! Component: 2150  -  total flux cleaned = 0.00184885 Jy
! Component: 2200  -  total flux cleaned = 0.00188862 Jy
! Component: 2250  -  total flux cleaned = 0.00192805 Jy
! Component: 2300  -  total flux cleaned = 0.00194771 Jy
! Component: 2350  -  total flux cleaned = 0.00197673 Jy
! Component: 2400  -  total flux cleaned = 0.001996 Jy
! Component: 2450  -  total flux cleaned = 0.00202451 Jy
! Component: 2500  -  total flux cleaned = 0.00207166 Jy
! Component: 2550  -  total flux cleaned = 0.00208108 Jy
! Component: 2600  -  total flux cleaned = 0.00212752 Jy
! Component: 2650  -  total flux cleaned = 0.00213688 Jy
! Component: 2700  -  total flux cleaned = 0.00214606 Jy
! Component: 2750  -  total flux cleaned = 0.00219136 Jy
! Component: 2800  -  total flux cleaned = 0.00219127 Jy
! Component: 2850  -  total flux cleaned = 0.0022359 Jy
! Component: 2900  -  total flux cleaned = 0.00222703 Jy
! Component: 2950  -  total flux cleaned = 0.00223581 Jy
! Component: 3000  -  total flux cleaned = 0.00220094 Jy
! Component: 3050  -  total flux cleaned = 0.00222702 Jy
! Component: 3100  -  total flux cleaned = 0.00223563 Jy
! Component: 3150  -  total flux cleaned = 0.00224413 Jy
! Component: 3200  -  total flux cleaned = 0.00222708 Jy
! Component: 3250  -  total flux cleaned = 0.00223547 Jy
! Component: 3300  -  total flux cleaned = 0.00222709 Jy
! Component: 3350  -  total flux cleaned = 0.00222712 Jy
! Component: 3400  -  total flux cleaned = 0.00222705 Jy
! Component: 3450  -  total flux cleaned = 0.00222704 Jy
! Component: 3500  -  total flux cleaned = 0.00221885 Jy
! Component: 3550  -  total flux cleaned = 0.00221881 Jy
! Component: 3600  -  total flux cleaned = 0.00220263 Jy
! Component: 3650  -  total flux cleaned = 0.00220266 Jy
! Component: 3700  -  total flux cleaned = 0.00219462 Jy
! Component: 3750  -  total flux cleaned = 0.00218662 Jy
! Component: 3800  -  total flux cleaned = 0.00219454 Jy
! Component: 3850  -  total flux cleaned = 0.0021945 Jy
! Component: 3900  -  total flux cleaned = 0.00217893 Jy
! Component: 3950  -  total flux cleaned = 0.00217121 Jy
! Component: 4000  -  total flux cleaned = 0.00217122 Jy
! Component: 4050  -  total flux cleaned = 0.00217125 Jy
! Total flux subtracted in 4096 components = 0.00217118 Jy
! Clean residual min=-0.000489 max=0.000506 Jy/beam
! Clean residual mean=0.000000 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0855303 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 369 components and 0.0855302 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0637-1052_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8342 x 2.148 at 0.5826 degrees (North through East)
! Clean map  min=-0.00084398  max=0.062402 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0637-1052_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0624024 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000121017 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.58179 0.58179 1.16358 2.32716 4.65432 9.30864 18.6173 37.2346 74.4691
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.062 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  515.649 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0637-1052_X_uvs.log closed on Thu Apr  7 12:03:17 2016