! Started logfile: /scr/pima/bg219h_uvs/J0632-1250_X_dfm.log on Thu May 19 22:12:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0632-1250_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0632-1250_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.672515 visibilities/baseline/integration-bin.
! Found source: J0632-1250
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20700 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0632-1250_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 95 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014464Jy  sigma=23.701706
! Fit after  self-cal, rms=0.859131Jy  sigma=19.918574
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6724 mas, bmaj=1.821 mas, bpa=0.4429 degrees
! Estimated noise=0.363878 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10428 Jy
! Component: 100  -  total flux cleaned = 0.131569 Jy
! Total flux subtracted in 100 components = 0.131569 Jy
! Clean residual min=-0.007439 max=0.022676 Jy/beam
! Clean residual mean=-0.000037 rms=0.002147 Jy/beam
! Combined flux in latest and established models = 0.131569 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.131569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075925Jy  sigma=1.658630
! Fit after  self-cal, rms=0.075692Jy  sigma=1.652548
! Inverting map 
! Added new window around map position (-1.2, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211963 Jy
! Component: 100  -  total flux cleaned = 0.0333804 Jy
! Total flux subtracted in 100 components = 0.0333804 Jy
! Clean residual min=-0.004621 max=0.006727 Jy/beam
! Clean residual mean=-0.000018 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.164949 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.164949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067312Jy  sigma=1.447897
! Fit after  self-cal, rms=0.066816Jy  sigma=1.435799
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00980554 Jy
! Component: 100  -  total flux cleaned = 0.0158828 Jy
! Total flux subtracted in 100 components = 0.0158828 Jy
! Clean residual min=-0.003108 max=0.003559 Jy/beam
! Clean residual mean=-0.000009 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.180832 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 20 components and 0.180832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064779Jy  sigma=1.385921
! Fit after  self-cal, rms=0.064678Jy  sigma=1.383455
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8579 mas, bmaj=2.231 mas, bpa=2.214 degrees
! Estimated noise=0.221201 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620325 Jy
! Component: 100  -  total flux cleaned = 0.0094013 Jy
! Component: 150  -  total flux cleaned = 0.0103937 Jy
! Component: 200  -  total flux cleaned = 0.0109446 Jy
! Total flux subtracted in 200 components = 0.0109446 Jy
! Clean residual min=-0.002051 max=0.003247 Jy/beam
! Clean residual mean=-0.000009 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.191777 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 0.191777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064070Jy  sigma=1.369391
! Fit after  self-cal, rms=0.064046Jy  sigma=1.368811
! Inverting map 
! Added new window around map position (-15.2, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255772 Jy
! Component: 100  -  total flux cleaned = 0.00321072 Jy
! Component: 150  -  total flux cleaned = 0.00324969 Jy
! Component: 200  -  total flux cleaned = 0.0032849 Jy
! Total flux subtracted in 200 components = 0.0032849 Jy
! Clean residual min=-0.002005 max=0.002154 Jy/beam
! Clean residual mean=-0.000005 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.195061 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 46 components and 0.195061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063922Jy  sigma=1.366268
! Fit after  self-cal, rms=0.063910Jy  sigma=1.366080
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8579 x 2.231 at 2.214 degrees (North through East)
! Clean map  min=-0.0019125  max=0.14094 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.94     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.00     OV        1.04     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.95     KP        0.98     
!   LA        0.99     MK        1.05     NL        0.99     OV        1.02     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.96     KP        1.00     
!   LA        0.98     MK        0.99     NL        0.99     OV        1.02     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.94     KP        0.99     
!   LA        0.98     MK        0.96     NL        1.00     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.98     KP        1.01     
!   LA        1.04     MK        1.03     NL        1.00     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.94     KP        0.99     
!   LA        0.96     MK        1.01     NL        0.99     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.94     KP        0.98     
!   LA        1.02     MK        1.01     NL        1.00     OV        1.04     
!   PT        1.04     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.98     KP        1.01     
!   LA        1.01     MK        1.00     NL        1.03     OV        1.02     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        1.01     
!   LA        1.01     MK        1.03     NL        0.98     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.93     KP        1.01     
!   LA        1.08     MK        1.05     NL        0.99     OV        1.03     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        1.01     
!   LA        1.00     MK        0.97     NL        0.98     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.93     KP        1.01     
!   LA        1.03     MK        1.01     NL        1.00     OV        0.99     
!   PT        1.02     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.063910Jy  sigma=1.366080
! Fit after  self-cal, rms=0.062395Jy  sigma=1.361852
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8577 mas, bmaj=2.229 mas, bpa=2.217 degrees
! Estimated noise=0.219539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000910043 Jy
! Component: 100  -  total flux cleaned = 0.0010434 Jy
! Component: 150  -  total flux cleaned = 0.00107059 Jy
! Component: 200  -  total flux cleaned = 0.000953391 Jy
! Total flux subtracted in 200 components = 0.000953391 Jy
! Clean residual min=-0.001663 max=0.001883 Jy/beam
! Clean residual mean=-0.000007 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.196015 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 0.196015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062353Jy  sigma=1.361056
! Fit after  self-cal, rms=0.062336Jy  sigma=1.360936
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062336Jy  sigma=1.360936
! Fit after  self-cal, rms=0.062171Jy  sigma=1.358525
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8586 mas, bmaj=2.23 mas, bpa=2.165 degrees
! Estimated noise=0.21949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.17797e-05 Jy
! Component: 100  -  total flux cleaned = -0.00011847 Jy
! Component: 150  -  total flux cleaned = -0.000262501 Jy
! Component: 200  -  total flux cleaned = -0.000335266 Jy
! Total flux subtracted in 200 components = -0.000335266 Jy
! Clean residual min=-0.001524 max=0.001757 Jy/beam
! Clean residual mean=-0.000004 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.19568 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 70 components and 0.19568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062149Jy  sigma=1.358129
! Fit after  self-cal, rms=0.062151Jy  sigma=1.358059
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101425 Jy
! Component: 100  -  total flux cleaned = 0.00080026 Jy
! Component: 150  -  total flux cleaned = 0.000770544 Jy
! Component: 200  -  total flux cleaned = 0.000725437 Jy
! Total flux subtracted in 200 components = 0.000725437 Jy
! Clean residual min=-0.001249 max=0.001326 Jy/beam
! Clean residual mean=-0.000003 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.196405 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 90 components and 0.196405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062101Jy  sigma=1.356958
! Fit after  self-cal, rms=0.062099Jy  sigma=1.356857
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062099Jy  sigma=1.356857
! Fit after  self-cal, rms=0.062041Jy  sigma=1.356740
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8592 mas, bmaj=2.231 mas, bpa=2.144 degrees
! Estimated noise=0.219582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285162 Jy
! Component: 100  -  total flux cleaned = 0.000238143 Jy
! Component: 150  -  total flux cleaned = 0.000198393 Jy
! Component: 200  -  total flux cleaned = 0.000145506 Jy
! Total flux subtracted in 200 components = 0.000145506 Jy
! Clean residual min=-0.001146 max=0.001211 Jy/beam
! Clean residual mean=-0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.196551 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 100 components and 0.196551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062025Jy  sigma=1.356382
! Fit after  self-cal, rms=0.062024Jy  sigma=1.356358
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.26166e-06 Jy
! Component: 100  -  total flux cleaned = -5.50091e-05 Jy
! Component: 150  -  total flux cleaned = -9.88165e-05 Jy
! Component: 200  -  total flux cleaned = -0.000153518 Jy
! Total flux subtracted in 200 components = -0.000153518 Jy
! Clean residual min=-0.001109 max=0.001178 Jy/beam
! Clean residual mean=-0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.196397 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 111 components and 0.196397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062017Jy  sigma=1.356204
! Fit after  self-cal, rms=0.062017Jy  sigma=1.356199
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062017Jy  sigma=1.356199
! Fit after  self-cal, rms=0.062000Jy  sigma=1.356165
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.006 mas, bmaj=3.652 mas, bpa=0.02849 degrees
! Estimated noise=0.280416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.8522e-05 Jy
! Component: 100  -  total flux cleaned = -9.50634e-06 Jy
! Component: 150  -  total flux cleaned = -8.32957e-05 Jy
! Component: 200  -  total flux cleaned = -0.000160809 Jy
! Total flux subtracted in 200 components = -0.000160809 Jy
! Clean residual min=-0.001245 max=0.001404 Jy/beam
! Clean residual mean=-0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.196236 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.196236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061997Jy  sigma=1.356087
! Fit after  self-cal, rms=0.061997Jy  sigma=1.356082
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.85159e-05 Jy
! Component: 100  -  total flux cleaned = -7.1831e-05 Jy
! Component: 150  -  total flux cleaned = -0.000132233 Jy
! Component: 200  -  total flux cleaned = -0.000159411 Jy
! Total flux subtracted in 200 components = -0.000159411 Jy
! Clean residual min=-0.001256 max=0.001362 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.196077 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 136 components and 0.196077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061996Jy  sigma=1.356055
! Fit after  self-cal, rms=0.061995Jy  sigma=1.356055
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8595 mas, bmaj=2.232 mas, bpa=2.144 degrees
! Estimated noise=0.219592 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8595 x 2.232 at 2.144 degrees (North through East)
! Clean map  min=-0.0015498  max=0.13997 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.675 mas, bmaj=1.824 mas, bpa=0.3087 degrees
! Estimated noise=0.360849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103105 Jy
! Component: 100  -  total flux cleaned = 0.136214 Jy
! Component: 150  -  total flux cleaned = 0.155593 Jy
! Component: 200  -  total flux cleaned = 0.168098 Jy
! Total flux subtracted in 200 components = 0.168098 Jy
! Clean residual min=-0.003861 max=0.006681 Jy/beam
! Clean residual mean=-0.000016 rms=0.000995 Jy/beam
! Combined flux in latest and established models = 0.168098 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.168098 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8595 mas, bmaj=2.232 mas, bpa=2.144 degrees
! Estimated noise=0.219592 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119763 Jy
! Component: 100  -  total flux cleaned = 0.0183416 Jy
! Component: 150  -  total flux cleaned = 0.0224418 Jy
! Component: 200  -  total flux cleaned = 0.0253311 Jy
! Total flux subtracted in 200 components = 0.0253311 Jy
! Clean residual min=-0.001606 max=0.001683 Jy/beam
! Clean residual mean=-0.000007 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.193429 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 29 components and 0.193429 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.006 mas, bmaj=3.652 mas, bpa=0.02849 degrees
! Estimated noise=0.280416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175265 Jy
! Component: 100  -  total flux cleaned = 0.00246779 Jy
! Component: 150  -  total flux cleaned = 0.00269163 Jy
! Component: 200  -  total flux cleaned = 0.00277722 Jy
! Total flux subtracted in 200 components = 0.00277722 Jy
! Clean residual min=-0.001481 max=0.001543 Jy/beam
! Clean residual mean=-0.000004 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.196206 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.65982e-05 Jy
! Component: 100  -  total flux cleaned = 9.90475e-05 Jy
! Component: 150  -  total flux cleaned = 0.00010266 Jy
! Component: 200  -  total flux cleaned = 0.00010544 Jy
! Total flux subtracted in 200 components = 0.00010544 Jy
! Clean residual min=-0.001346 max=0.001452 Jy/beam
! Clean residual mean=-0.000002 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.196312 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 77 components and 0.196312 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8595 mas, bmaj=2.232 mas, bpa=2.144 degrees
! Estimated noise=0.219592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025197 Jy
! Component: 100  -  total flux cleaned = 7.72601e-05 Jy
! Component: 150  -  total flux cleaned = -6.34223e-05 Jy
! Component: 200  -  total flux cleaned = -0.000125135 Jy
! Total flux subtracted in 200 components = -0.000125135 Jy
! Clean residual min=-0.001166 max=0.001247 Jy/beam
! Clean residual mean=-0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.196186 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 95 components and 0.196186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062025Jy  sigma=1.356852
! Fit after  self-cal, rms=0.062019Jy  sigma=1.356708
wmodel /J0632-1250_X_map.mod
! wmodel: Unable to open new model file: /J0632-1250_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0632-1250_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8595 x 2.232 at 2.144 degrees (North through East)
! Clean map  min=-0.001445  max=0.14028 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0632-1250_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.140282 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000290271 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.620757 0.620757 1.24151 2.48303 4.96606 9.93212 19.8642 39.7285 79.4569
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  483.28 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0632-1250_X_dfm.log closed on Thu May 19 22:12:47 2016