! Started logfile: /scr/pima/bg219h_uvs/J0622+3326_X_dfm.log on Thu May 19 22:12:20 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0622+3326_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0622+3326_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.879675 visibilities/baseline/integration-bin.
! Found source: J0622+3326
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19476 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0622+3326_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015875Jy  sigma=25.158689
! Fit after  self-cal, rms=0.840864Jy  sigma=20.769053
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7791 mas, bmaj=1.248 mas, bpa=-6.715 degrees
! Estimated noise=0.442366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11856 Jy
! Component: 100  -  total flux cleaned = 0.149353 Jy
! Total flux subtracted in 100 components = 0.149353 Jy
! Clean residual min=-0.004707 max=0.011812 Jy/beam
! Clean residual mean=0.000003 rms=0.001193 Jy/beam
! Combined flux in latest and established models = 0.149353 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.149353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066711Jy  sigma=1.537230
! Fit after  self-cal, rms=0.066550Jy  sigma=1.532395
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129477 Jy
! Component: 100  -  total flux cleaned = 0.0197338 Jy
! Total flux subtracted in 100 components = 0.0197338 Jy
! Clean residual min=-0.003286 max=0.005865 Jy/beam
! Clean residual mean=0.000000 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.169087 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.169087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063320Jy  sigma=1.441431
! Fit after  self-cal, rms=0.063297Jy  sigma=1.440841
! Inverting map 
! Added new window around map position (-0.8, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00574398 Jy
! Component: 100  -  total flux cleaned = 0.00943196 Jy
! Total flux subtracted in 100 components = 0.00943196 Jy
! Clean residual min=-0.002881 max=0.002827 Jy/beam
! Clean residual mean=-0.000001 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.178519 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.178519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062644Jy  sigma=1.422141
! Fit after  self-cal, rms=0.062614Jy  sigma=1.421595
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=1.577 mas, bpa=-6.251 degrees
! Estimated noise=0.213338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00414223 Jy
! Component: 100  -  total flux cleaned = 0.00658309 Jy
! Component: 150  -  total flux cleaned = 0.0081926 Jy
! Component: 200  -  total flux cleaned = 0.00929667 Jy
! Total flux subtracted in 200 components = 0.00929667 Jy
! Clean residual min=-0.002679 max=0.001965 Jy/beam
! Clean residual mean=-0.000002 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.187816 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 34 components and 0.187816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062316Jy  sigma=1.414026
! Fit after  self-cal, rms=0.062303Jy  sigma=1.413735
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.043 x 1.577 at -6.251 degrees (North through East)
! Clean map  min=-0.0025281  max=0.15936 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.95     KP        0.97     
!   LA        0.99     MK        1.01     NL        0.99     OV        1.02     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.92     KP        0.99     
!   LA        1.00     MK        1.05     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.93     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.03     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        0.94     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.94     KP        0.98     
!   LA        1.01     MK        1.05     NL        1.03     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.95     KP        0.97     
!   LA        0.98     MK        1.06     NL        1.02     OV        0.99     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.94     KP        1.01     
!   LA        1.02     MK        1.01     NL        1.00     OV        1.02     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        0.95     KP        1.01     
!   LA        1.00     MK        1.04     NL        1.00     OV        0.98     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.92     KP        0.98     
!   LA        0.99     MK        1.04     NL        1.01     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.93     KP        0.99     
!   LA        1.01     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.94     KP        0.95     
!   LA        1.00     MK        1.01     NL        0.98     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.062303Jy  sigma=1.413735
! Fit after  self-cal, rms=0.061378Jy  sigma=1.406853
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.047 mas, bmaj=1.578 mas, bpa=-6.212 degrees
! Estimated noise=0.212822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000514061 Jy
! Component: 100  -  total flux cleaned = 0.000488205 Jy
! Component: 150  -  total flux cleaned = 0.000486431 Jy
! Component: 200  -  total flux cleaned = 0.000505157 Jy
! Total flux subtracted in 200 components = 0.000505157 Jy
! Clean residual min=-0.001588 max=0.001456 Jy/beam
! Clean residual mean=-0.000001 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.188321 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.188321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061355Jy  sigma=1.406305
! Fit after  self-cal, rms=0.061341Jy  sigma=1.406195
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061341Jy  sigma=1.406195
! Fit after  self-cal, rms=0.061235Jy  sigma=1.403343
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.047 mas, bmaj=1.573 mas, bpa=-6.136 degrees
! Estimated noise=0.212594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203642 Jy
! Component: 100  -  total flux cleaned = 0.000205115 Jy
! Component: 150  -  total flux cleaned = 0.000188227 Jy
! Component: 200  -  total flux cleaned = 0.000187926 Jy
! Total flux subtracted in 200 components = 0.000187926 Jy
! Clean residual min=-0.001478 max=0.001545 Jy/beam
! Clean residual mean=-0.000002 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.188509 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.188509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061221Jy  sigma=1.403050
! Fit after  self-cal, rms=0.061220Jy  sigma=1.402976
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.6, -16.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133017 Jy
! Component: 100  -  total flux cleaned = 0.00164192 Jy
! Component: 150  -  total flux cleaned = 0.00168773 Jy
! Component: 200  -  total flux cleaned = 0.00168778 Jy
! Total flux subtracted in 200 components = 0.00168778 Jy
! Clean residual min=-0.001425 max=0.001342 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.190197 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 0.190197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061188Jy  sigma=1.402149
! Fit after  self-cal, rms=0.061187Jy  sigma=1.402108
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061187Jy  sigma=1.402108
! Fit after  self-cal, rms=0.061154Jy  sigma=1.402041
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.047 mas, bmaj=1.572 mas, bpa=-6.107 degrees
! Estimated noise=0.212435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032876 Jy
! Component: 100  -  total flux cleaned = 0.000365382 Jy
! Component: 150  -  total flux cleaned = 0.00035056 Jy
! Component: 200  -  total flux cleaned = 0.000336825 Jy
! Total flux subtracted in 200 components = 0.000336825 Jy
! Clean residual min=-0.001376 max=0.001309 Jy/beam
! Clean residual mean=-0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.190534 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 69 components and 0.190534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061145Jy  sigma=1.401825
! Fit after  self-cal, rms=0.061145Jy  sigma=1.401816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.514e-05 Jy
! Component: 100  -  total flux cleaned = 3.54954e-05 Jy
! Component: 150  -  total flux cleaned = 2.29571e-05 Jy
! Component: 200  -  total flux cleaned = -1.16181e-06 Jy
! Total flux subtracted in 200 components = -1.16181e-06 Jy
! Clean residual min=-0.001369 max=0.001294 Jy/beam
! Clean residual mean=-0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.190532 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.190532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061139Jy  sigma=1.401697
! Fit after  self-cal, rms=0.061139Jy  sigma=1.401691
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061139Jy  sigma=1.401691
! Fit after  self-cal, rms=0.061110Jy  sigma=1.401673
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.169 mas, bmaj=2.622 mas, bpa=-5.008 degrees
! Estimated noise=0.255125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239689 Jy
! Component: 100  -  total flux cleaned = 0.000290077 Jy
! Component: 150  -  total flux cleaned = 0.000331853 Jy
! Component: 200  -  total flux cleaned = 0.00037479 Jy
! Total flux subtracted in 200 components = 0.00037479 Jy
! Clean residual min=-0.001024 max=0.001195 Jy/beam
! Clean residual mean=-0.000002 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.190907 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 0.190907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061107Jy  sigma=1.401638
! Fit after  self-cal, rms=0.061107Jy  sigma=1.401627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (23.6, 24.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104241 Jy
! Component: 100  -  total flux cleaned = 0.00116344 Jy
! Component: 150  -  total flux cleaned = 0.00125362 Jy
! Component: 200  -  total flux cleaned = 0.00123748 Jy
! Total flux subtracted in 200 components = 0.00123748 Jy
! Clean residual min=-0.001050 max=0.000941 Jy/beam
! Clean residual mean=-0.000002 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.192145 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 104 components and 0.192145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061090Jy  sigma=1.401242
! Fit after  self-cal, rms=0.061090Jy  sigma=1.401221
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.047 mas, bmaj=1.571 mas, bpa=-6.082 degrees
! Estimated noise=0.212332 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.047 x 1.571 at -6.082 degrees (North through East)
! Clean map  min=-0.0011429  max=0.15861 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7831 mas, bmaj=1.246 mas, bpa=-6.537 degrees
! Estimated noise=0.441921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118357 Jy
! Component: 100  -  total flux cleaned = 0.149624 Jy
! Component: 150  -  total flux cleaned = 0.162549 Jy
! Component: 200  -  total flux cleaned = 0.169992 Jy
! Total flux subtracted in 200 components = 0.169992 Jy
! Clean residual min=-0.003313 max=0.003969 Jy/beam
! Clean residual mean=0.000000 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.169992 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.169992 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.047 mas, bmaj=1.571 mas, bpa=-6.082 degrees
! Estimated noise=0.212332 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00716606 Jy
! Component: 100  -  total flux cleaned = 0.011207 Jy
! Component: 150  -  total flux cleaned = 0.0137202 Jy
! Component: 200  -  total flux cleaned = 0.0155217 Jy
! Total flux subtracted in 200 components = 0.0155217 Jy
! Clean residual min=-0.001402 max=0.001485 Jy/beam
! Clean residual mean=-0.000002 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.185514 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.185514 Jy
! Inverting map 
! Added new window around map position (50.2, -35.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135001 Jy
! Component: 100  -  total flux cleaned = 0.0023981 Jy
! Component: 150  -  total flux cleaned = 0.00321611 Jy
! Component: 200  -  total flux cleaned = 0.00397588 Jy
! Total flux subtracted in 200 components = 0.00397588 Jy
! Clean residual min=-0.001285 max=0.001024 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.18949 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 54 components and 0.18949 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.169 mas, bmaj=2.622 mas, bpa=-5.008 degrees
! Estimated noise=0.255125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110795 Jy
! Component: 100  -  total flux cleaned = 0.00188489 Jy
! Component: 150  -  total flux cleaned = 0.00226918 Jy
! Component: 200  -  total flux cleaned = 0.00251191 Jy
! Total flux subtracted in 200 components = 0.00251191 Jy
! Clean residual min=-0.001065 max=0.000928 Jy/beam
! Clean residual mean=-0.000002 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.192001 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134848 Jy
! Component: 100  -  total flux cleaned = 0.000241567 Jy
! Component: 150  -  total flux cleaned = 0.000354276 Jy
! Component: 200  -  total flux cleaned = 0.000412852 Jy
! Total flux subtracted in 200 components = 0.000412852 Jy
! Clean residual min=-0.001032 max=0.000875 Jy/beam
! Clean residual mean=-0.000002 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.192414 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 96 components and 0.192414 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.047 mas, bmaj=1.571 mas, bpa=-6.082 degrees
! Estimated noise=0.212332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.51645e-05 Jy
! Component: 100  -  total flux cleaned = -0.000160756 Jy
! Component: 150  -  total flux cleaned = -0.000208361 Jy
! Component: 200  -  total flux cleaned = -0.00020894 Jy
! Total flux subtracted in 200 components = -0.00020894 Jy
! Clean residual min=-0.001118 max=0.000989 Jy/beam
! Clean residual mean=-0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.192205 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 120 components and 0.192205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061060Jy  sigma=1.400565
! Fit after  self-cal, rms=0.061056Jy  sigma=1.400487
wmodel /J0622+3326_X_map.mod
! wmodel: Unable to open new model file: /J0622+3326_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0622+3326_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.047 x 1.571 at -6.082 degrees (North through East)
! Clean map  min=-0.0010293  max=0.1584 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0622+3326_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.158402 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248937 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.471467 0.471467 0.942934 1.88587 3.77173 7.54347 15.0869 30.1739 60.3478
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.158 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  636.311 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0622+3326_X_dfm.log closed on Thu May 19 22:12:23 2016