! Started logfile: /scr/pima/bg219h_uvs/J0620-2827_X_uvs.log on Thu Apr  7 12:02:46 2016
obs /scr/pima/bg219h_uvs/J0620-2827_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0620-2827_X_uva.fits
! AN table 1: 51 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.798693 visibilities/baseline/integration-bin.
! Found source: J0620-2827
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21996 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0620-2827_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.049082Jy  sigma=21.995097
! Fit after  self-cal, rms=0.711956Jy  sigma=14.741605
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6476 mas, bmaj=1.748 mas, bpa=-8.994 degrees
! Estimated noise=0.639417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.210997 Jy
! Component: 100  -  total flux cleaned = 0.267663 Jy
! Total flux subtracted in 100 components = 0.267663 Jy
! Clean residual min=-0.013155 max=0.041798 Jy/beam
! Clean residual mean=-0.000041 rms=0.003759 Jy/beam
! Combined flux in latest and established models = 0.267664 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.267664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.107563Jy  sigma=2.146247
! Fit after  self-cal, rms=0.107531Jy  sigma=2.145119
! Inverting map 
! Added new window around map position (1.2, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385179 Jy
! Component: 100  -  total flux cleaned = 0.0595838 Jy
! Total flux subtracted in 100 components = 0.0595838 Jy
! Clean residual min=-0.008429 max=0.015829 Jy/beam
! Clean residual mean=-0.000024 rms=0.002194 Jy/beam
! Combined flux in latest and established models = 0.327247 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.327247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.086613Jy  sigma=1.659368
! Fit after  self-cal, rms=0.085436Jy  sigma=1.637642
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162859 Jy
! Component: 100  -  total flux cleaned = 0.0270489 Jy
! Total flux subtracted in 100 components = 0.0270489 Jy
! Clean residual min=-0.006311 max=0.009343 Jy/beam
! Clean residual mean=-0.000016 rms=0.001602 Jy/beam
! Combined flux in latest and established models = 0.354296 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 30 components and 0.354296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080226Jy  sigma=1.509337
! Fit after  self-cal, rms=0.079993Jy  sigma=1.505176
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8298 mas, bmaj=2.174 mas, bpa=-7.475 degrees
! Estimated noise=0.31454 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145572 Jy
! Component: 100  -  total flux cleaned = 0.0226664 Jy
! Component: 150  -  total flux cleaned = 0.0273731 Jy
! Component: 200  -  total flux cleaned = 0.0301574 Jy
! Total flux subtracted in 200 components = 0.0301574 Jy
! Clean residual min=-0.004500 max=0.006971 Jy/beam
! Clean residual mean=-0.000010 rms=0.001191 Jy/beam
! Combined flux in latest and established models = 0.384454 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 45 components and 0.384454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077540Jy  sigma=1.440371
! Fit after  self-cal, rms=0.077443Jy  sigma=1.438628
! Inverting map 
! Added new window around map position (4, 8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00655773 Jy
! Component: 100  -  total flux cleaned = 0.00978256 Jy
! Component: 150  -  total flux cleaned = 0.0115497 Jy
! Component: 200  -  total flux cleaned = 0.0125711 Jy
! Total flux subtracted in 200 components = 0.0125711 Jy
! Clean residual min=-0.003527 max=0.004950 Jy/beam
! Clean residual mean=-0.000012 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.397025 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 79 components and 0.397025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076879Jy  sigma=1.425845
! Fit after  self-cal, rms=0.076835Jy  sigma=1.424785
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8298 x 2.174 at -7.475 degrees (North through East)
! Clean map  min=-0.0036143  max=0.27995 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.11     KP        0.97     
!   LA        1.01     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.09     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.01     OV        1.00     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.12     KP        0.98     
!   LA        1.01     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.09     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.00     SC        0.97     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.09     KP        0.98     
!   LA        1.01     MK        0.98     NL        0.99     OV        1.01     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.07     KP        0.98     
!   LA        1.02     MK        0.98     NL        0.99     OV        1.01     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.12     KP        0.99     
!   LA        1.04     MK        0.99     NL        0.99     OV        0.99     
!   PT        0.97     SC        0.96     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076835Jy  sigma=1.424785
! Fit after  self-cal, rms=0.078407Jy  sigma=1.411359
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.828 mas, bmaj=2.158 mas, bpa=-7.237 degrees
! Estimated noise=0.313795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000715777 Jy
! Component: 100  -  total flux cleaned = 0.00104255 Jy
! Component: 150  -  total flux cleaned = 0.00131726 Jy
! Component: 200  -  total flux cleaned = 0.00151027 Jy
! Total flux subtracted in 200 components = 0.00151027 Jy
! Clean residual min=-0.002941 max=0.003344 Jy/beam
! Clean residual mean=-0.000009 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.398535 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 97 components and 0.398535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078287Jy  sigma=1.409300
! Fit after  self-cal, rms=0.078316Jy  sigma=1.409178
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078316Jy  sigma=1.409178
! Fit after  self-cal, rms=0.078548Jy  sigma=1.405272
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.827 mas, bmaj=2.155 mas, bpa=-7.211 degrees
! Estimated noise=0.313734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000334791 Jy
! Component: 100  -  total flux cleaned = -0.000133596 Jy
! Component: 150  -  total flux cleaned = 4.78816e-05 Jy
! Component: 200  -  total flux cleaned = 0.000130653 Jy
! Total flux subtracted in 200 components = 0.000130653 Jy
! Clean residual min=-0.002608 max=0.003012 Jy/beam
! Clean residual mean=-0.000008 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.398666 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 105 components and 0.398666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078482Jy  sigma=1.404112
! Fit after  self-cal, rms=0.078487Jy  sigma=1.404085
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00290475 Jy
! Component: 100  -  total flux cleaned = 0.00353049 Jy
! Component: 150  -  total flux cleaned = 0.00363268 Jy
! Component: 200  -  total flux cleaned = 0.00367866 Jy
! Total flux subtracted in 200 components = 0.00367866 Jy
! Clean residual min=-0.002388 max=0.002283 Jy/beam
! Clean residual mean=-0.000009 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.402344 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 122 components and 0.402344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078352Jy  sigma=1.401238
! Fit after  self-cal, rms=0.078337Jy  sigma=1.400990
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078337Jy  sigma=1.400990
! Fit after  self-cal, rms=0.078082Jy  sigma=1.395971
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8263 mas, bmaj=2.154 mas, bpa=-7.158 degrees
! Estimated noise=0.312993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010016 Jy
! Component: 100  -  total flux cleaned = 0.00116607 Jy
! Component: 150  -  total flux cleaned = 0.00127569 Jy
! Component: 200  -  total flux cleaned = 0.00134157 Jy
! Total flux subtracted in 200 components = 0.00134157 Jy
! Clean residual min=-0.002114 max=0.001968 Jy/beam
! Clean residual mean=-0.000008 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.403686 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 137 components and 0.403686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078035Jy  sigma=1.395192
! Fit after  self-cal, rms=0.078033Jy  sigma=1.395134
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233117 Jy
! Component: 100  -  total flux cleaned = 0.000263938 Jy
! Component: 150  -  total flux cleaned = 0.00029233 Jy
! Component: 200  -  total flux cleaned = 0.000319997 Jy
! Total flux subtracted in 200 components = 0.000319997 Jy
! Clean residual min=-0.002094 max=0.001959 Jy/beam
! Clean residual mean=-0.000008 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.404006 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 142 components and 0.404006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078009Jy  sigma=1.394714
! Fit after  self-cal, rms=0.078008Jy  sigma=1.394702
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078008Jy  sigma=1.394702
! Fit after  self-cal, rms=0.078006Jy  sigma=1.394613
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.271 mas, bmaj=5.863 mas, bpa=-1.724 degrees
! Estimated noise=0.401009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000559696 Jy
! Component: 100  -  total flux cleaned = 0.000504864 Jy
! Component: 150  -  total flux cleaned = 0.000505088 Jy
! Component: 200  -  total flux cleaned = 0.000475787 Jy
! Total flux subtracted in 200 components = 0.000475787 Jy
! Clean residual min=-0.002191 max=0.001811 Jy/beam
! Clean residual mean=-0.000015 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.404482 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 151 components and 0.404482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077998Jy  sigma=1.394456
! Fit after  self-cal, rms=0.077995Jy  sigma=1.394418
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130245 Jy
! Component: 100  -  total flux cleaned = 6.96095e-05 Jy
! Component: 150  -  total flux cleaned = 2.61653e-06 Jy
! Component: 200  -  total flux cleaned = -2.3151e-05 Jy
! Total flux subtracted in 200 components = -2.3151e-05 Jy
! Clean residual min=-0.002192 max=0.001812 Jy/beam
! Clean residual mean=-0.000015 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.404458 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 153 components and 0.404458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077989Jy  sigma=1.394361
! Fit after  self-cal, rms=0.077989Jy  sigma=1.394347
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8261 mas, bmaj=2.153 mas, bpa=-7.135 degrees
! Estimated noise=0.312911 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8261 x 2.153 at -7.135 degrees (North through East)
! Clean map  min=-0.0019437  max=0.28075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6457 mas, bmaj=1.73 mas, bpa=-8.579 degrees
! Estimated noise=0.635746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.209117 Jy
! Component: 100  -  total flux cleaned = 0.272606 Jy
! Component: 150  -  total flux cleaned = 0.308128 Jy
! Component: 200  -  total flux cleaned = 0.330232 Jy
! Total flux subtracted in 200 components = 0.330232 Jy
! Clean residual min=-0.006031 max=0.011900 Jy/beam
! Clean residual mean=-0.000017 rms=0.001809 Jy/beam
! Combined flux in latest and established models = 0.330232 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.330232 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8261 mas, bmaj=2.153 mas, bpa=-7.135 degrees
! Estimated noise=0.312911 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242308 Jy
! Component: 100  -  total flux cleaned = 0.037406 Jy
! Component: 150  -  total flux cleaned = 0.0462237 Jy
! Component: 200  -  total flux cleaned = 0.0525379 Jy
! Total flux subtracted in 200 components = 0.0525379 Jy
! Clean residual min=-0.002770 max=0.004376 Jy/beam
! Clean residual mean=-0.000010 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.38277 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 44 components and 0.38277 Jy
! Inverting map 
! Added new window around map position (2.6, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00491074 Jy
! Component: 100  -  total flux cleaned = 0.00850814 Jy
! Component: 150  -  total flux cleaned = 0.0112574 Jy
! Component: 200  -  total flux cleaned = 0.0134407 Jy
! Total flux subtracted in 200 components = 0.0134407 Jy
! Clean residual min=-0.002005 max=0.001999 Jy/beam
! Clean residual mean=-0.000008 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.39621 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 78 components and 0.39621 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.271 mas, bmaj=5.863 mas, bpa=-1.724 degrees
! Estimated noise=0.401009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255294 Jy
! Component: 100  -  total flux cleaned = 0.00426966 Jy
! Component: 150  -  total flux cleaned = 0.00548538 Jy
! Component: 200  -  total flux cleaned = 0.00636057 Jy
! Total flux subtracted in 200 components = 0.00636057 Jy
! Clean residual min=-0.002177 max=0.001813 Jy/beam
! Clean residual mean=-0.000015 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.402571 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000637625 Jy
! Component: 100  -  total flux cleaned = 0.00110596 Jy
! Component: 150  -  total flux cleaned = 0.00129951 Jy
! Component: 200  -  total flux cleaned = 0.0013385 Jy
! Total flux subtracted in 200 components = 0.0013385 Jy
! Clean residual min=-0.002180 max=0.001747 Jy/beam
! Clean residual mean=-0.000015 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.403909 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 129 components and 0.403909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8261 mas, bmaj=2.153 mas, bpa=-7.135 degrees
! Estimated noise=0.312911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000136028 Jy
! Component: 100  -  total flux cleaned = -0.000170632 Jy
! Component: 150  -  total flux cleaned = -0.00016998 Jy
! Component: 200  -  total flux cleaned = -0.00014022 Jy
! Total flux subtracted in 200 components = -0.00014022 Jy
! Clean residual min=-0.001930 max=0.001813 Jy/beam
! Clean residual mean=-0.000007 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.403769 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 148 components and 0.403769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077960Jy  sigma=1.394137
! Fit after  self-cal, rms=0.077953Jy  sigma=1.393996
wmodel /scr/pima/bg219h_uvs/J0620-2827_X_map.mod
! Writing 148 model components to file: /scr/pima/bg219h_uvs/J0620-2827_X_map.mod
wobs /scr/pima/bg219h_uvs/J0620-2827_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0620-2827_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J0620-2827_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219h_uvs/J0620-2827_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149166 Jy
! Component: 100  -  total flux cleaned = -0.00018175 Jy
! Component: 150  -  total flux cleaned = -0.000270211 Jy
! Component: 200  -  total flux cleaned = -0.000326496 Jy
! Component: 250  -  total flux cleaned = -0.000353169 Jy
! Component: 300  -  total flux cleaned = -0.000405599 Jy
! Component: 350  -  total flux cleaned = -0.000508106 Jy
! Component: 400  -  total flux cleaned = -0.000657948 Jy
! Component: 450  -  total flux cleaned = -0.000780375 Jy
! Component: 500  -  total flux cleaned = -0.000995183 Jy
! Component: 550  -  total flux cleaned = -0.00108848 Jy
! Component: 600  -  total flux cleaned = -0.00120319 Jy
! Component: 650  -  total flux cleaned = -0.00127074 Jy
! Component: 700  -  total flux cleaned = -0.00142487 Jy
! Component: 750  -  total flux cleaned = -0.00157598 Jy
! Component: 800  -  total flux cleaned = -0.00159733 Jy
! Component: 850  -  total flux cleaned = -0.00172334 Jy
! Component: 900  -  total flux cleaned = -0.00176439 Jy
! Component: 950  -  total flux cleaned = -0.00178479 Jy
! Component: 1000  -  total flux cleaned = -0.00184502 Jy
! Component: 1050  -  total flux cleaned = -0.00184501 Jy
! Component: 1100  -  total flux cleaned = -0.00190387 Jy
! Component: 1150  -  total flux cleaned = -0.0019041 Jy
! Component: 1200  -  total flux cleaned = -0.00194245 Jy
! Component: 1250  -  total flux cleaned = -0.00192375 Jy
! Component: 1300  -  total flux cleaned = -0.00196147 Jy
! Component: 1350  -  total flux cleaned = -0.0019985 Jy
! Component: 1400  -  total flux cleaned = -0.00199864 Jy
! Component: 1450  -  total flux cleaned = -0.00192636 Jy
! Component: 1500  -  total flux cleaned = -0.00196198 Jy
! Component: 1550  -  total flux cleaned = -0.00194429 Jy
! Component: 1600  -  total flux cleaned = -0.00196165 Jy
! Component: 1650  -  total flux cleaned = -0.00199638 Jy
! Component: 1700  -  total flux cleaned = -0.00192799 Jy
! Component: 1750  -  total flux cleaned = -0.00201305 Jy
! Component: 1800  -  total flux cleaned = -0.00197938 Jy
! Component: 1850  -  total flux cleaned = -0.00197917 Jy
! Component: 1900  -  total flux cleaned = -0.00192974 Jy
! Component: 1950  -  total flux cleaned = -0.00194614 Jy
! Component: 2000  -  total flux cleaned = -0.00197858 Jy
! Component: 2050  -  total flux cleaned = -0.00194624 Jy
! Component: 2100  -  total flux cleaned = -0.00196219 Jy
! Component: 2150  -  total flux cleaned = -0.00189921 Jy
! Component: 2200  -  total flux cleaned = -0.00191474 Jy
! Component: 2250  -  total flux cleaned = -0.00186841 Jy
! Component: 2300  -  total flux cleaned = -0.00191439 Jy
! Component: 2350  -  total flux cleaned = -0.00183822 Jy
! Component: 2400  -  total flux cleaned = -0.00197432 Jy
! Component: 2450  -  total flux cleaned = -0.00198903 Jy
! Component: 2500  -  total flux cleaned = -0.00195921 Jy
! Component: 2550  -  total flux cleaned = -0.00198887 Jy
! Component: 2600  -  total flux cleaned = -0.00203289 Jy
! Component: 2650  -  total flux cleaned = -0.00201824 Jy
! Component: 2700  -  total flux cleaned = -0.0020327 Jy
! Component: 2750  -  total flux cleaned = -0.00206145 Jy
! Component: 2800  -  total flux cleaned = -0.00204723 Jy
! Component: 2850  -  total flux cleaned = -0.00208971 Jy
! Component: 2900  -  total flux cleaned = -0.00206168 Jy
! Component: 2950  -  total flux cleaned = -0.0021315 Jy
! Component: 3000  -  total flux cleaned = -0.0021177 Jy
! Component: 3050  -  total flux cleaned = -0.00217289 Jy
! Component: 3100  -  total flux cleaned = -0.00221407 Jy
! Component: 3150  -  total flux cleaned = -0.00220034 Jy
! Component: 3200  -  total flux cleaned = -0.00229517 Jy
! Component: 3250  -  total flux cleaned = -0.0023221 Jy
! Component: 3300  -  total flux cleaned = -0.00237545 Jy
! Component: 3350  -  total flux cleaned = -0.00240206 Jy
! Component: 3400  -  total flux cleaned = -0.00242856 Jy
! Component: 3450  -  total flux cleaned = -0.0024548 Jy
! Component: 3500  -  total flux cleaned = -0.00252013 Jy
! Component: 3550  -  total flux cleaned = -0.00252006 Jy
! Component: 3600  -  total flux cleaned = -0.00253298 Jy
! Component: 3650  -  total flux cleaned = -0.00257151 Jy
! Component: 3700  -  total flux cleaned = -0.00264803 Jy
! Component: 3750  -  total flux cleaned = -0.00266068 Jy
! Component: 3800  -  total flux cleaned = -0.00268581 Jy
! Component: 3850  -  total flux cleaned = -0.00271083 Jy
! Component: 3900  -  total flux cleaned = -0.00274828 Jy
! Component: 3950  -  total flux cleaned = -0.00278551 Jy
! Component: 4000  -  total flux cleaned = -0.00279788 Jy
! Component: 4050  -  total flux cleaned = -0.00288359 Jy
! Total flux subtracted in 4096 components = -0.00293226 Jy
! Clean residual min=-0.000744 max=0.000818 Jy/beam
! Clean residual mean=-0.000003 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.400837 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 417 components and 0.400837 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J0620-2827_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8261 x 2.153 at -7.135 degrees (North through East)
! Clean map  min=-0.0012842  max=0.2818 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0620-2827_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.281802 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00020258 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.215662 0.215662 0.431324 0.862648 1.7253 3.45059 6.90119 13.8024 27.6047 55.2095
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.281 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1391.06 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0620-2827_X_uvs.log closed on Thu Apr  7 12:02:51 2016