! Started logfile: /scr/pima/bg219h_uvs/J0610-2301_X_dfm.log on Thu May 19 22:11:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0610-2301_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0610-2301_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.897701 visibilities/baseline/integration-bin.
! Found source: J0610-2301
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 28116 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0610-2301_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022074Jy  sigma=22.628909
! Fit after  self-cal, rms=0.790732Jy  sigma=17.465484
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5955 mas, bmaj=1.705 mas, bpa=-5.609 degrees
! Estimated noise=0.422756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157972 Jy
! Component: 100  -  total flux cleaned = 0.194802 Jy
! Total flux subtracted in 100 components = 0.194802 Jy
! Clean residual min=-0.009409 max=0.030084 Jy/beam
! Clean residual mean=-0.000031 rms=0.002517 Jy/beam
! Combined flux in latest and established models = 0.194802 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.194802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088144Jy  sigma=1.855583
! Fit after  self-cal, rms=0.088006Jy  sigma=1.854148
! Inverting map 
! Added new window around map position (1.4, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.02857 Jy
! Component: 100  -  total flux cleaned = 0.0445577 Jy
! Total flux subtracted in 100 components = 0.0445577 Jy
! Clean residual min=-0.006450 max=0.011479 Jy/beam
! Clean residual mean=-0.000016 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.239359 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.239359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075092Jy  sigma=1.536234
! Fit after  self-cal, rms=0.073926Jy  sigma=1.509636
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011736 Jy
! Component: 100  -  total flux cleaned = 0.0191771 Jy
! Total flux subtracted in 100 components = 0.0191771 Jy
! Clean residual min=-0.004006 max=0.006503 Jy/beam
! Clean residual mean=-0.000009 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.258537 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.258537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070904Jy  sigma=1.433765
! Fit after  self-cal, rms=0.070720Jy  sigma=1.429689
! Inverting map 
! Added new window around map position (2.2, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00685604 Jy
! Component: 100  -  total flux cleaned = 0.011477 Jy
! Total flux subtracted in 100 components = 0.011477 Jy
! Clean residual min=-0.003193 max=0.004603 Jy/beam
! Clean residual mean=-0.000005 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.270014 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.270014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069687Jy  sigma=1.403624
! Fit after  self-cal, rms=0.069608Jy  sigma=1.401866
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7951 mas, bmaj=2.057 mas, bpa=-5.422 degrees
! Estimated noise=0.199436 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00596212 Jy
! Component: 100  -  total flux cleaned = 0.00937078 Jy
! Component: 150  -  total flux cleaned = 0.0115583 Jy
! Component: 200  -  total flux cleaned = 0.0130133 Jy
! Total flux subtracted in 200 components = 0.0130133 Jy
! Clean residual min=-0.002051 max=0.002422 Jy/beam
! Clean residual mean=-0.000004 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.283027 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 42 components and 0.283027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069075Jy  sigma=1.389117
! Fit after  self-cal, rms=0.069018Jy  sigma=1.387715
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7951 x 2.057 at -5.422 degrees (North through East)
! Clean map  min=-0.0017751  max=0.20717 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        0.97     
!   LA        1.02     MK        1.00     NL        1.01     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.05     KP        0.97     
!   LA        1.01     MK        1.00     NL        1.02     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.05     KP        0.98     
!   LA        1.01     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        0.98     
!   LA        1.01     MK        1.00     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.04     KP        1.00     
!   LA        1.02     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        0.98     
!   LA        1.02     MK        1.00     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.99     KP        0.97     
!   LA        1.01     MK        1.00     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00     KP        0.97     
!   LA        1.01     MK        0.96     NL        0.98     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.97     KP        0.98     
!   LA        1.01     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.99     KP        0.93     
!   LA        1.01     MK        0.98     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.069018Jy  sigma=1.387715
! Fit after  self-cal, rms=0.068741Jy  sigma=1.383438
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7952 mas, bmaj=2.056 mas, bpa=-5.422 degrees
! Estimated noise=0.198822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000836642 Jy
! Component: 100  -  total flux cleaned = 0.00105242 Jy
! Component: 150  -  total flux cleaned = 0.00116729 Jy
! Component: 200  -  total flux cleaned = 0.00114374 Jy
! Total flux subtracted in 200 components = 0.00114374 Jy
! Clean residual min=-0.001659 max=0.001906 Jy/beam
! Clean residual mean=-0.000002 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.284171 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 0.284171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068704Jy  sigma=1.382674
! Fit after  self-cal, rms=0.068698Jy  sigma=1.382517
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068698Jy  sigma=1.382517
! Fit after  self-cal, rms=0.068514Jy  sigma=1.379400
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7952 mas, bmaj=2.056 mas, bpa=-5.428 degrees
! Estimated noise=0.198831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554314 Jy
! Component: 100  -  total flux cleaned = 0.000680062 Jy
! Component: 150  -  total flux cleaned = 0.000679159 Jy
! Component: 200  -  total flux cleaned = 0.000678837 Jy
! Total flux subtracted in 200 components = 0.000678837 Jy
! Clean residual min=-0.001346 max=0.001314 Jy/beam
! Clean residual mean=-0.000002 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.284849 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.28485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068495Jy  sigma=1.379043
! Fit after  self-cal, rms=0.068493Jy  sigma=1.378978
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015202 Jy
! Component: 100  -  total flux cleaned = 0.000172761 Jy
! Component: 150  -  total flux cleaned = 0.000189769 Jy
! Component: 200  -  total flux cleaned = 0.00018957 Jy
! Total flux subtracted in 200 components = 0.00018957 Jy
! Clean residual min=-0.001353 max=0.001289 Jy/beam
! Clean residual mean=-0.000002 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.285039 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.285039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068483Jy  sigma=1.378799
! Fit after  self-cal, rms=0.068482Jy  sigma=1.378778
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068482Jy  sigma=1.378778
! Fit after  self-cal, rms=0.068323Jy  sigma=1.377549
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7953 mas, bmaj=2.058 mas, bpa=-5.441 degrees
! Estimated noise=0.198746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257443 Jy
! Component: 100  -  total flux cleaned = 0.000311451 Jy
! Component: 150  -  total flux cleaned = 0.000326591 Jy
! Component: 200  -  total flux cleaned = 0.000326481 Jy
! Total flux subtracted in 200 components = 0.000326481 Jy
! Clean residual min=-0.001148 max=0.001117 Jy/beam
! Clean residual mean=-0.000002 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.285366 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.285366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068313Jy  sigma=1.377380
! Fit after  self-cal, rms=0.068313Jy  sigma=1.377357
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106035 Jy
! Component: 100  -  total flux cleaned = 9.28769e-05 Jy
! Component: 150  -  total flux cleaned = 9.29805e-05 Jy
! Component: 200  -  total flux cleaned = 9.30076e-05 Jy
! Total flux subtracted in 200 components = 9.30076e-05 Jy
! Clean residual min=-0.001147 max=0.001093 Jy/beam
! Clean residual mean=-0.000002 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.285459 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 65 components and 0.285459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068308Jy  sigma=1.377267
! Fit after  self-cal, rms=0.068308Jy  sigma=1.377255
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068308Jy  sigma=1.377255
! Fit after  self-cal, rms=0.068254Jy  sigma=1.377231
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.164 mas, bmaj=5.048 mas, bpa=-1.544 degrees
! Estimated noise=0.259306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174324 Jy
! Component: 100  -  total flux cleaned = 0.000187126 Jy
! Component: 150  -  total flux cleaned = 0.000196687 Jy
! Component: 200  -  total flux cleaned = 0.000204543 Jy
! Total flux subtracted in 200 components = 0.000204543 Jy
! Clean residual min=-0.001363 max=0.001300 Jy/beam
! Clean residual mean=-0.000004 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.285663 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 70 components and 0.285663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068250Jy  sigma=1.377176
! Fit after  self-cal, rms=0.068248Jy  sigma=1.377158
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.64836e-05 Jy
! Component: 100  -  total flux cleaned = -5.86845e-06 Jy
! Component: 150  -  total flux cleaned = 1.9817e-06 Jy
! Component: 200  -  total flux cleaned = 1.76531e-06 Jy
! Total flux subtracted in 200 components = 1.76531e-06 Jy
! Clean residual min=-0.001353 max=0.001299 Jy/beam
! Clean residual mean=-0.000004 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.285665 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 71 components and 0.285665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068247Jy  sigma=1.377147
! Fit after  self-cal, rms=0.068247Jy  sigma=1.377134
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7955 mas, bmaj=2.059 mas, bpa=-5.432 degrees
! Estimated noise=0.198775 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7955 x 2.059 at -5.432 degrees (North through East)
! Clean map  min=-0.0010186  max=0.20631 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5959 mas, bmaj=1.706 mas, bpa=-5.608 degrees
! Estimated noise=0.42128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157257 Jy
! Component: 100  -  total flux cleaned = 0.20262 Jy
! Component: 150  -  total flux cleaned = 0.226768 Jy
! Component: 200  -  total flux cleaned = 0.24215 Jy
! Total flux subtracted in 200 components = 0.24215 Jy
! Clean residual min=-0.003808 max=0.008316 Jy/beam
! Clean residual mean=-0.000014 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.24215 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.24215 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7955 mas, bmaj=2.059 mas, bpa=-5.432 degrees
! Estimated noise=0.198775 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169574 Jy
! Component: 100  -  total flux cleaned = 0.0266972 Jy
! Component: 150  -  total flux cleaned = 0.0325777 Jy
! Component: 200  -  total flux cleaned = 0.0362156 Jy
! Total flux subtracted in 200 components = 0.0362156 Jy
! Clean residual min=-0.001403 max=0.002013 Jy/beam
! Clean residual mean=-0.000007 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.278365 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 29 components and 0.278365 Jy
! Inverting map 
! Added new window around map position (2.4, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237494 Jy
! Component: 100  -  total flux cleaned = 0.00395462 Jy
! Component: 150  -  total flux cleaned = 0.0050258 Jy
! Component: 200  -  total flux cleaned = 0.00573823 Jy
! Total flux subtracted in 200 components = 0.00573823 Jy
! Clean residual min=-0.001138 max=0.001123 Jy/beam
! Clean residual mean=-0.000003 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.284104 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 50 components and 0.284104 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.164 mas, bmaj=5.048 mas, bpa=-1.544 degrees
! Estimated noise=0.259306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000607999 Jy
! Component: 100  -  total flux cleaned = 0.0007781 Jy
! Component: 150  -  total flux cleaned = 0.000918945 Jy
! Component: 200  -  total flux cleaned = 0.00102354 Jy
! Total flux subtracted in 200 components = 0.00102354 Jy
! Clean residual min=-0.001319 max=0.001323 Jy/beam
! Clean residual mean=-0.000004 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.285127 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.36703e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107062 Jy
! Component: 150  -  total flux cleaned = 0.000131952 Jy
! Component: 200  -  total flux cleaned = 0.000148717 Jy
! Total flux subtracted in 200 components = 0.000148717 Jy
! Clean residual min=-0.001285 max=0.001319 Jy/beam
! Clean residual mean=-0.000004 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.285276 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 80 components and 0.285276 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7955 mas, bmaj=2.059 mas, bpa=-5.432 degrees
! Estimated noise=0.198775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.14068e-05 Jy
! Component: 100  -  total flux cleaned = -5.27327e-05 Jy
! Component: 150  -  total flux cleaned = -5.26788e-05 Jy
! Component: 200  -  total flux cleaned = -4.33367e-05 Jy
! Total flux subtracted in 200 components = -4.33367e-05 Jy
! Clean residual min=-0.001111 max=0.001066 Jy/beam
! Clean residual mean=-0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.285233 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 0.285233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068240Jy  sigma=1.376913
! Fit after  self-cal, rms=0.068238Jy  sigma=1.376843
wmodel /J0610-2301_X_map.mod
! wmodel: Unable to open new model file: /J0610-2301_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0610-2301_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7955 x 2.059 at -5.432 degrees (North through East)
! Clean map  min=-0.00097222  max=0.20713 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0610-2301_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.207129 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000267916 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.388042 0.388042 0.776084 1.55217 3.10434 6.20867 12.4173 24.8347 49.6694 99.3387
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.207 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  773.112 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0610-2301_X_dfm.log closed on Thu May 19 22:11:44 2016