! Started logfile: /scr/pima/bg219h_uvs/J0607-2447_X_dfm.log on Thu May 19 22:11:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0607-2447_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0607-2447_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.927599 visibilities/baseline/integration-bin.
! Found source: J0607-2447
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 31056 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0607-2447_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008227Jy  sigma=22.062385
! Fit after  self-cal, rms=0.923551Jy  sigma=20.188897
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6068 mas, bmaj=1.691 mas, bpa=-5.914 degrees
! Estimated noise=0.376573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0562738 Jy
! Component: 100  -  total flux cleaned = 0.0710032 Jy
! Total flux subtracted in 100 components = 0.0710032 Jy
! Clean residual min=-0.003150 max=0.006362 Jy/beam
! Clean residual mean=0.000002 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.0710032 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0710032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074412Jy  sigma=1.458503
! Fit after  self-cal, rms=0.073676Jy  sigma=1.442167
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00781473 Jy
! Component: 100  -  total flux cleaned = 0.0120274 Jy
! Total flux subtracted in 100 components = 0.0120274 Jy
! Clean residual min=-0.003091 max=0.004794 Jy/beam
! Clean residual mean=0.000001 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.0830306 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.0830306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072317Jy  sigma=1.407050
! Fit after  self-cal, rms=0.072319Jy  sigma=1.406847
! Inverting map 
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00434641 Jy
! Component: 100  -  total flux cleaned = 0.00685448 Jy
! Total flux subtracted in 100 components = 0.00685448 Jy
! Clean residual min=-0.002968 max=0.002969 Jy/beam
! Clean residual mean=0.000001 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.0898851 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 22 components and 0.0898851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071896Jy  sigma=1.396427
! Fit after  self-cal, rms=0.071873Jy  sigma=1.395963
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7968 mas, bmaj=2.044 mas, bpa=-4.812 degrees
! Estimated noise=0.199413 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00474871 Jy
! Component: 100  -  total flux cleaned = 0.0073724 Jy
! Component: 150  -  total flux cleaned = 0.00900629 Jy
! Component: 200  -  total flux cleaned = 0.00989988 Jy
! Total flux subtracted in 200 components = 0.00989988 Jy
! Clean residual min=-0.001704 max=0.001964 Jy/beam
! Clean residual mean=0.000004 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0997849 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 37 components and 0.099785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071540Jy  sigma=1.388379
! Fit after  self-cal, rms=0.071476Jy  sigma=1.387279
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7968 x 2.044 at -4.812 degrees (North through East)
! Clean map  min=-0.0015231  max=0.07781 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.00     KP        0.98     
!   LA        0.99     MK        1.09     NL        1.00     OV        1.05     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        0.96     
!   LA        1.03     MK        1.06     NL        1.06     OV        1.02     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.96     KP        1.00     
!   LA        1.02     MK        1.00     NL        1.01     OV        1.04     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.95     
!   LA        1.00     MK        0.97     NL        1.02     OV        1.04     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.99     KP        1.00     
!   LA        1.03     MK        1.02     NL        1.01     OV        1.03     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        1.02     
!   LA        0.97     MK        1.10     NL        0.99     OV        0.99     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.96     KP        1.01     
!   LA        1.01     MK        0.94     NL        0.99     OV        0.99     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.96     KP        1.07     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.99     HN        0.92     KP        1.03     
!   LA        1.05     MK        1.00     NL        0.99     OV        1.01     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00     KP        1.03     
!   LA        0.97     MK        0.92     NL        1.03     OV        0.97     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.92     KP        1.02     
!   LA        0.98     MK        0.98     NL        1.00     OV        0.97     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.00     KP        0.97     
!   LA        0.99     MK        0.92     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.071476Jy  sigma=1.387279
! Fit after  self-cal, rms=0.069915Jy  sigma=1.385182
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7941 mas, bmaj=2.036 mas, bpa=-4.573 degrees
! Estimated noise=0.197477 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132544 Jy
! Component: 100  -  total flux cleaned = 0.00155861 Jy
! Component: 150  -  total flux cleaned = 0.0015589 Jy
! Component: 200  -  total flux cleaned = 0.00155968 Jy
! Total flux subtracted in 200 components = 0.00155968 Jy
! Clean residual min=-0.001509 max=0.001783 Jy/beam
! Clean residual mean=0.000003 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.101345 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 51 components and 0.101345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069879Jy  sigma=1.384537
! Fit after  self-cal, rms=0.069869Jy  sigma=1.384369
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069869Jy  sigma=1.384369
! Fit after  self-cal, rms=0.069784Jy  sigma=1.382789
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7931 mas, bmaj=2.036 mas, bpa=-4.55 degrees
! Estimated noise=0.197622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000914289 Jy
! Component: 100  -  total flux cleaned = 0.00103231 Jy
! Component: 150  -  total flux cleaned = 0.00105266 Jy
! Component: 200  -  total flux cleaned = 0.00103371 Jy
! Total flux subtracted in 200 components = 0.00103371 Jy
! Clean residual min=-0.001465 max=0.001650 Jy/beam
! Clean residual mean=0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.102378 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 59 components and 0.102378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069765Jy  sigma=1.382482
! Fit after  self-cal, rms=0.069767Jy  sigma=1.382428
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174586 Jy
! Component: 100  -  total flux cleaned = 0.00240693 Jy
! Component: 150  -  total flux cleaned = 0.00246243 Jy
! Component: 200  -  total flux cleaned = 0.00253537 Jy
! Total flux subtracted in 200 components = 0.00253537 Jy
! Clean residual min=-0.001421 max=0.001333 Jy/beam
! Clean residual mean=0.000002 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.104914 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.104914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069719Jy  sigma=1.381351
! Fit after  self-cal, rms=0.069712Jy  sigma=1.381251
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069712Jy  sigma=1.381251
! Fit after  self-cal, rms=0.069686Jy  sigma=1.380623
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7919 mas, bmaj=2.037 mas, bpa=-4.634 degrees
! Estimated noise=0.197424 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000690444 Jy
! Component: 100  -  total flux cleaned = 0.000732694 Jy
! Component: 150  -  total flux cleaned = 0.000770235 Jy
! Component: 200  -  total flux cleaned = 0.000819988 Jy
! Total flux subtracted in 200 components = 0.000819988 Jy
! Clean residual min=-0.001359 max=0.001266 Jy/beam
! Clean residual mean=0.000001 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.105734 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.105734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069672Jy  sigma=1.380393
! Fit after  self-cal, rms=0.069678Jy  sigma=1.380352
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266582 Jy
! Component: 100  -  total flux cleaned = 0.000281908 Jy
! Component: 150  -  total flux cleaned = 0.000310184 Jy
! Component: 200  -  total flux cleaned = 0.00032339 Jy
! Total flux subtracted in 200 components = 0.00032339 Jy
! Clean residual min=-0.001364 max=0.001242 Jy/beam
! Clean residual mean=0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.106057 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.106057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069672Jy  sigma=1.380249
! Fit after  self-cal, rms=0.069670Jy  sigma=1.380244
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069670Jy  sigma=1.380244
! Fit after  self-cal, rms=0.069651Jy  sigma=1.380219
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.144 mas, bmaj=4.992 mas, bpa=0.842 degrees
! Estimated noise=0.257792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00048169 Jy
! Component: 100  -  total flux cleaned = 0.000547817 Jy
! Component: 150  -  total flux cleaned = 0.000559094 Jy
! Component: 200  -  total flux cleaned = 0.00057893 Jy
! Total flux subtracted in 200 components = 0.00057893 Jy
! Clean residual min=-0.001704 max=0.001757 Jy/beam
! Clean residual mean=0.000001 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.106636 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 93 components and 0.106636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069649Jy  sigma=1.380193
! Fit after  self-cal, rms=0.069648Jy  sigma=1.380186
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107309 Jy
! Component: 100  -  total flux cleaned = 9.77123e-05 Jy
! Component: 150  -  total flux cleaned = 8.01952e-05 Jy
! Component: 200  -  total flux cleaned = 7.24703e-05 Jy
! Total flux subtracted in 200 components = 7.24703e-05 Jy
! Clean residual min=-0.001690 max=0.001747 Jy/beam
! Clean residual mean=0.000001 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.106708 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.106708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069647Jy  sigma=1.380199
! Fit after  self-cal, rms=0.069647Jy  sigma=1.380191
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7917 mas, bmaj=2.038 mas, bpa=-4.631 degrees
! Estimated noise=0.1975 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7917 x 2.038 at -4.631 degrees (North through East)
! Clean map  min=-0.0012666  max=0.076903 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6029 mas, bmaj=1.688 mas, bpa=-5.752 degrees
! Estimated noise=0.370602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0556166 Jy
! Component: 100  -  total flux cleaned = 0.0712295 Jy
! Component: 150  -  total flux cleaned = 0.0794126 Jy
! Component: 200  -  total flux cleaned = 0.0846492 Jy
! Total flux subtracted in 200 components = 0.0846492 Jy
! Clean residual min=-0.002531 max=0.002943 Jy/beam
! Clean residual mean=0.000001 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.0846491 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0846491 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7917 mas, bmaj=2.038 mas, bpa=-4.631 degrees
! Estimated noise=0.1975 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00716245 Jy
! Component: 100  -  total flux cleaned = 0.0116439 Jy
! Component: 150  -  total flux cleaned = 0.0146531 Jy
! Component: 200  -  total flux cleaned = 0.0167733 Jy
! Total flux subtracted in 200 components = 0.0167733 Jy
! Clean residual min=-0.001449 max=0.001417 Jy/beam
! Clean residual mean=0.000001 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.101422 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 50 components and 0.101422 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.144 mas, bmaj=4.992 mas, bpa=0.842 degrees
! Estimated noise=0.257792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024846 Jy
! Component: 100  -  total flux cleaned = 0.00390974 Jy
! Component: 150  -  total flux cleaned = 0.00482265 Jy
! Component: 200  -  total flux cleaned = 0.00518239 Jy
! Total flux subtracted in 200 components = 0.00518239 Jy
! Clean residual min=-0.001719 max=0.001919 Jy/beam
! Clean residual mean=0.000003 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.106605 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161981 Jy
! Component: 100  -  total flux cleaned = 0.000180341 Jy
! Component: 150  -  total flux cleaned = 0.000212204 Jy
! Component: 200  -  total flux cleaned = 0.000227347 Jy
! Total flux subtracted in 200 components = 0.000227347 Jy
! Clean residual min=-0.001700 max=0.001867 Jy/beam
! Clean residual mean=0.000002 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.106832 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 80 components and 0.106832 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7917 mas, bmaj=2.038 mas, bpa=-4.631 degrees
! Estimated noise=0.1975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000171652 Jy
! Component: 100  -  total flux cleaned = -5.36166e-05 Jy
! Component: 150  -  total flux cleaned = 3.20426e-05 Jy
! Component: 200  -  total flux cleaned = 9.35283e-05 Jy
! Total flux subtracted in 200 components = 9.35283e-05 Jy
! Clean residual min=-0.001344 max=0.001263 Jy/beam
! Clean residual mean=0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.106926 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 92 components and 0.106926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069651Jy  sigma=1.380259
! Fit after  self-cal, rms=0.069650Jy  sigma=1.380205
wmodel /J0607-2447_X_map.mod
! wmodel: Unable to open new model file: /J0607-2447_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0607-2447_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7917 x 2.038 at -4.631 degrees (North through East)
! Clean map  min=-0.0012609  max=0.076605 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0607-2447_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0766049 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000311216 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.21878 1.21878 2.43756 4.87513 9.75026 19.5005 39.001 78.0021
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  246.147 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0607-2447_X_dfm.log closed on Thu May 19 22:11:20 2016