! Started logfile: /scr/pima/bg219h_uvs/J0559+3749_X_dfm.log on Thu May 19 22:11:00 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0559+3749_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0559+3749_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.835185 visibilities/baseline/integration-bin.
! Found source: J0559+3749
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16236 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0559+3749_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.034924Jy  sigma=25.015892
! Fit after  self-cal, rms=0.777515Jy  sigma=18.698253
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7802 mas, bmaj=1.181 mas, bpa=-3.488 degrees
! Estimated noise=0.466398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.168272 Jy
! Component: 100  -  total flux cleaned = 0.212155 Jy
! Total flux subtracted in 100 components = 0.212155 Jy
! Clean residual min=-0.006814 max=0.018241 Jy/beam
! Clean residual mean=0.000005 rms=0.001820 Jy/beam
! Combined flux in latest and established models = 0.212155 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.212155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074904Jy  sigma=1.705953
! Fit after  self-cal, rms=0.074640Jy  sigma=1.701608
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204285 Jy
! Component: 100  -  total flux cleaned = 0.0304958 Jy
! Total flux subtracted in 100 components = 0.0304958 Jy
! Clean residual min=-0.004902 max=0.006665 Jy/beam
! Clean residual mean=0.000002 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.242651 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.242651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067709Jy  sigma=1.513791
! Fit after  self-cal, rms=0.067516Jy  sigma=1.510442
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.526 mas, bpa=-4.159 degrees
! Estimated noise=0.254808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00981859 Jy
! Component: 100  -  total flux cleaned = 0.0142032 Jy
! Component: 150  -  total flux cleaned = 0.0165873 Jy
! Component: 200  -  total flux cleaned = 0.0178231 Jy
! Total flux subtracted in 200 components = 0.0178231 Jy
! Clean residual min=-0.003069 max=0.006619 Jy/beam
! Clean residual mean=-0.000007 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.260474 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.260474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066231Jy  sigma=1.476661
! Fit after  self-cal, rms=0.066121Jy  sigma=1.474940
! Inverting map 
! Added new window around map position (1.4, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00574479 Jy
! Component: 100  -  total flux cleaned = 0.00851023 Jy
! Component: 150  -  total flux cleaned = 0.00958176 Jy
! Component: 200  -  total flux cleaned = 0.010139 Jy
! Total flux subtracted in 200 components = 0.010139 Jy
! Clean residual min=-0.002802 max=0.002837 Jy/beam
! Clean residual mean=-0.000004 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.270613 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 36 components and 0.270613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065632Jy  sigma=1.461766
! Fit after  self-cal, rms=0.065546Jy  sigma=1.460027
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.526 at -4.159 degrees (North through East)
! Clean map  min=-0.0024216  max=0.2177 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.97     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.01     OV        1.02     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.94     KP        1.00     
!   LA        1.00     MK        1.02     NL        0.99     OV        1.03     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.96     KP        1.02     
!   LA        1.00     MK        1.02     NL        0.98     OV        1.02     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.95     KP        1.02     
!   LA        1.00     MK        1.03     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.96     KP        0.98     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.91     KP        0.99     
!   LA        1.02     MK        1.03     NL        1.01     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.95     KP        0.98     
!   LA        1.00     MK        1.01     NL        0.99     OV        1.02     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.94     KP        1.02     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        1.00     
!   LA        1.01     MK        1.03     NL        0.98     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.94     KP        0.99     
!   LA        0.99     MK        1.03     NL        1.00     OV        1.00     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.94     KP        1.04     
!   LA        0.99     MK        1.01     NL        1.02     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.065546Jy  sigma=1.460027
! Fit after  self-cal, rms=0.064612Jy  sigma=1.451687
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.529 mas, bpa=-4.397 degrees
! Estimated noise=0.254975 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000915967 Jy
! Component: 100  -  total flux cleaned = 0.00130498 Jy
! Component: 150  -  total flux cleaned = 0.00152583 Jy
! Component: 200  -  total flux cleaned = 0.00164299 Jy
! Total flux subtracted in 200 components = 0.00164299 Jy
! Clean residual min=-0.002198 max=0.001976 Jy/beam
! Clean residual mean=0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.272256 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 49 components and 0.272256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064504Jy  sigma=1.449534
! Fit after  self-cal, rms=0.064472Jy  sigma=1.449162
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064472Jy  sigma=1.449162
! Fit after  self-cal, rms=0.064379Jy  sigma=1.444731
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.523 mas, bpa=-4.224 degrees
! Estimated noise=0.254705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000432163 Jy
! Component: 100  -  total flux cleaned = 0.000696431 Jy
! Component: 150  -  total flux cleaned = 0.000757677 Jy
! Component: 200  -  total flux cleaned = 0.000839848 Jy
! Total flux subtracted in 200 components = 0.000839848 Jy
! Clean residual min=-0.001797 max=0.001602 Jy/beam
! Clean residual mean=-0.000000 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.273095 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 60 components and 0.273095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064334Jy  sigma=1.443877
! Fit after  self-cal, rms=0.064327Jy  sigma=1.443705
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.86847e-05 Jy
! Component: 100  -  total flux cleaned = 0.000202006 Jy
! Component: 150  -  total flux cleaned = 0.000245802 Jy
! Component: 200  -  total flux cleaned = 0.000265848 Jy
! Total flux subtracted in 200 components = 0.000265848 Jy
! Clean residual min=-0.001768 max=0.001517 Jy/beam
! Clean residual mean=-0.000000 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.273361 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 0.273361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064304Jy  sigma=1.443276
! Fit after  self-cal, rms=0.064297Jy  sigma=1.443174
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064297Jy  sigma=1.443174
! Fit after  self-cal, rms=0.064267Jy  sigma=1.443113
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.523 mas, bpa=-4.317 degrees
! Estimated noise=0.254679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142648 Jy
! Component: 100  -  total flux cleaned = 0.000377053 Jy
! Component: 150  -  total flux cleaned = 0.000466864 Jy
! Component: 200  -  total flux cleaned = 0.000500341 Jy
! Total flux subtracted in 200 components = 0.000500341 Jy
! Clean residual min=-0.001684 max=0.001480 Jy/beam
! Clean residual mean=-0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.273862 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 71 components and 0.273862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064251Jy  sigma=1.442795
! Fit after  self-cal, rms=0.064245Jy  sigma=1.442725
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.80816e-06 Jy
! Component: 100  -  total flux cleaned = 0.000140732 Jy
! Component: 150  -  total flux cleaned = 0.000140628 Jy
! Component: 200  -  total flux cleaned = 0.000141025 Jy
! Total flux subtracted in 200 components = 0.000141025 Jy
! Clean residual min=-0.001669 max=0.001431 Jy/beam
! Clean residual mean=-0.000000 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.274003 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 75 components and 0.274003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064235Jy  sigma=1.442519
! Fit after  self-cal, rms=0.064231Jy  sigma=1.442474
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064231Jy  sigma=1.442474
! Fit after  self-cal, rms=0.064228Jy  sigma=1.442452
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.075 mas, bmaj=2.661 mas, bpa=2.808 degrees
! Estimated noise=0.309694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00036508 Jy
! Component: 100  -  total flux cleaned = 0.000524624 Jy
! Component: 150  -  total flux cleaned = 0.000615457 Jy
! Component: 200  -  total flux cleaned = 0.000653391 Jy
! Total flux subtracted in 200 components = 0.000653391 Jy
! Clean residual min=-0.001855 max=0.001697 Jy/beam
! Clean residual mean=0.000000 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.274656 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 78 components and 0.274656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064225Jy  sigma=1.442340
! Fit after  self-cal, rms=0.064220Jy  sigma=1.442273
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.07413e-06 Jy
! Component: 100  -  total flux cleaned = 8.79121e-05 Jy
! Component: 150  -  total flux cleaned = 0.000118608 Jy
! Component: 200  -  total flux cleaned = 0.000131503 Jy
! Total flux subtracted in 200 components = 0.000131503 Jy
! Clean residual min=-0.001834 max=0.001650 Jy/beam
! Clean residual mean=0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.274788 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 80 components and 0.274788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064218Jy  sigma=1.442208
! Fit after  self-cal, rms=0.064215Jy  sigma=1.442163
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.523 mas, bpa=-4.398 degrees
! Estimated noise=0.254735 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.002 x 1.523 at -4.398 degrees (North through East)
! Clean map  min=-0.0014746  max=0.21738 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.781 mas, bmaj=1.178 mas, bpa=-3.739 degrees
! Estimated noise=0.465311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167296 Jy
! Component: 100  -  total flux cleaned = 0.215471 Jy
! Component: 150  -  total flux cleaned = 0.23591 Jy
! Component: 200  -  total flux cleaned = 0.246403 Jy
! Total flux subtracted in 200 components = 0.246403 Jy
! Clean residual min=-0.004184 max=0.005323 Jy/beam
! Clean residual mean=0.000003 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.246403 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.246403 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.523 mas, bpa=-4.398 degrees
! Estimated noise=0.254735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094839 Jy
! Component: 100  -  total flux cleaned = 0.0147623 Jy
! Component: 150  -  total flux cleaned = 0.0183246 Jy
! Component: 200  -  total flux cleaned = 0.0208529 Jy
! Total flux subtracted in 200 components = 0.0208529 Jy
! Clean residual min=-0.001971 max=0.001661 Jy/beam
! Clean residual mean=-0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.267256 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.267256 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.075 mas, bmaj=2.661 mas, bpa=2.808 degrees
! Estimated noise=0.309694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272576 Jy
! Component: 100  -  total flux cleaned = 0.00428388 Jy
! Component: 150  -  total flux cleaned = 0.00531667 Jy
! Component: 200  -  total flux cleaned = 0.0060322 Jy
! Total flux subtracted in 200 components = 0.0060322 Jy
! Clean residual min=-0.001871 max=0.001662 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.273288 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00050008 Jy
! Component: 100  -  total flux cleaned = 0.000751353 Jy
! Component: 150  -  total flux cleaned = 0.000881514 Jy
! Component: 200  -  total flux cleaned = 0.000981438 Jy
! Total flux subtracted in 200 components = 0.000981438 Jy
! Clean residual min=-0.001825 max=0.001660 Jy/beam
! Clean residual mean=-0.000000 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.27427 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 70 components and 0.27427 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.523 mas, bpa=-4.398 degrees
! Estimated noise=0.254735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000514704 Jy
! Component: 100  -  total flux cleaned = -0.000457289 Jy
! Component: 150  -  total flux cleaned = -0.000406501 Jy
! Component: 200  -  total flux cleaned = -0.000314034 Jy
! Total flux subtracted in 200 components = -0.000314034 Jy
! Clean residual min=-0.001587 max=0.001491 Jy/beam
! Clean residual mean=-0.000000 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.273956 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 81 components and 0.273956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064245Jy  sigma=1.442723
! Fit after  self-cal, rms=0.064227Jy  sigma=1.442420
wmodel /J0559+3749_X_map.mod
! wmodel: Unable to open new model file: /J0559+3749_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0559+3749_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.002 x 1.523 at -4.398 degrees (North through East)
! Clean map  min=-0.0015249  max=0.21728 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0559+3749_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.217283 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000345219 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.47664 0.47664 0.95328 1.90656 3.81312 7.62624 15.2525 30.505 61.0099
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.217 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  629.405 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0559+3749_X_dfm.log closed on Thu May 19 22:11:03 2016