! Started logfile: /scr/pima/bg219h_uvs/J0558+3418_S_uvs.log on Thu Apr 7 08:54:29 2016 obs /scr/pima/bg219h_uvs/J0558+3418_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J0558+3418_S_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.727778 visibilities/baseline/integration-bin. ! Found source: J0558+3418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 4716 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0558+3418_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.016022Jy sigma=25.709606 ! Fit after self-cal, rms=0.840050Jy sigma=21.318664 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=4.794 mas, bpa=-7.357 degrees ! Estimated noise=0.693862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125784 Jy ! Component: 100 - total flux cleaned = 0.153214 Jy ! Total flux subtracted in 100 components = 0.153214 Jy ! Clean residual min=-0.004973 max=0.007650 Jy/beam ! Clean residual mean=0.000006 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.153214 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.153214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056809Jy sigma=1.348916 ! Fit after self-cal, rms=0.056804Jy sigma=1.348794 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.625 mas, bmaj=5.76 mas, bpa=-12.43 degrees ! Estimated noise=0.473957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618334 Jy ! Component: 100 - total flux cleaned = 0.00795221 Jy ! Component: 150 - total flux cleaned = 0.00789815 Jy ! Component: 200 - total flux cleaned = 0.00789999 Jy ! Total flux subtracted in 200 components = 0.00789999 Jy ! Clean residual min=-0.003643 max=0.006354 Jy/beam ! Clean residual mean=0.000005 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.161114 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.161114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056050Jy sigma=1.336717 ! Fit after self-cal, rms=0.056052Jy sigma=1.336634 ! Inverting map ! Added new window around map position (34.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338481 Jy ! Component: 100 - total flux cleaned = 0.00402648 Jy ! Component: 150 - total flux cleaned = 0.00418826 Jy ! Component: 200 - total flux cleaned = 0.00436014 Jy ! Total flux subtracted in 200 components = 0.00436014 Jy ! Clean residual min=-0.003520 max=0.004561 Jy/beam ! Clean residual mean=0.000005 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.165474 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.165474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055560Jy sigma=1.322318 ! Fit after self-cal, rms=0.055521Jy sigma=1.321210 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.625 x 5.76 at -12.43 degrees (North through East) ! Clean map min=-0.0032971 max=0.16058 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.00 KP 1.01 ! LA 0.96 MK 1.01 NL 1.02 OV 0.99 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.01 KP 0.97 ! LA 0.99 MK 1.02 NL 1.13 OV 0.98 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.99 KP 1.01 ! LA 0.99 MK 0.98 NL 0.93 OV 0.96 ! PT 1.03 SC 0.99 ! ! ! Fit before self-cal, rms=0.055521Jy sigma=1.321210 ! Fit after self-cal, rms=0.054373Jy sigma=1.309365 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=5.748 mas, bpa=-12.05 degrees ! Estimated noise=0.468205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000867016 Jy ! Component: 100 - total flux cleaned = -0.000955507 Jy ! Component: 150 - total flux cleaned = -0.000955599 Jy ! Component: 200 - total flux cleaned = -0.0010561 Jy ! Total flux subtracted in 200 components = -0.0010561 Jy ! Clean residual min=-0.002888 max=0.003461 Jy/beam ! Clean residual mean=0.000007 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.164418 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 47 components and 0.164418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054320Jy sigma=1.306904 ! Fit after self-cal, rms=0.054324Jy sigma=1.306760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054324Jy sigma=1.306760 ! Fit after self-cal, rms=0.053808Jy sigma=1.300543 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=5.779 mas, bpa=-12.65 degrees ! Estimated noise=0.465823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145405 Jy ! Component: 100 - total flux cleaned = -0.002345 Jy ! Component: 150 - total flux cleaned = -0.00265529 Jy ! Component: 200 - total flux cleaned = -0.00279804 Jy ! Total flux subtracted in 200 components = -0.00279804 Jy ! Clean residual min=-0.002939 max=0.003386 Jy/beam ! Clean residual mean=0.000005 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.16162 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.16162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053775Jy sigma=1.298753 ! Fit after self-cal, rms=0.053777Jy sigma=1.298672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30, -61.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232407 Jy ! Component: 100 - total flux cleaned = 0.00227163 Jy ! Component: 150 - total flux cleaned = 0.00219977 Jy ! Component: 200 - total flux cleaned = 0.0020975 Jy ! Total flux subtracted in 200 components = 0.0020975 Jy ! Clean residual min=-0.002613 max=0.002925 Jy/beam ! Clean residual mean=0.000005 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.163717 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 0.163717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053638Jy sigma=1.294553 ! Fit after self-cal, rms=0.053624Jy sigma=1.294286 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053624Jy sigma=1.294286 ! Fit after self-cal, rms=0.053315Jy sigma=1.293709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=5.786 mas, bpa=-12.75 degrees ! Estimated noise=0.463327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201704 Jy ! Component: 100 - total flux cleaned = -0.000555877 Jy ! Component: 150 - total flux cleaned = -0.000674764 Jy ! Component: 200 - total flux cleaned = -0.000781947 Jy ! Total flux subtracted in 200 components = -0.000781947 Jy ! Clean residual min=-0.002537 max=0.002719 Jy/beam ! Clean residual mean=0.000005 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.162935 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 84 components and 0.162935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053283Jy sigma=1.292212 ! Fit after self-cal, rms=0.053280Jy sigma=1.292173 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.8627e-05 Jy ! Component: 100 - total flux cleaned = -7.84835e-05 Jy ! Component: 150 - total flux cleaned = -0.000124882 Jy ! Component: 200 - total flux cleaned = -0.00012511 Jy ! Total flux subtracted in 200 components = -0.00012511 Jy ! Clean residual min=-0.002492 max=0.002695 Jy/beam ! Clean residual mean=0.000005 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.16281 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 95 components and 0.16281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053263Jy sigma=1.291611 ! Fit after self-cal, rms=0.053263Jy sigma=1.291600 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053263Jy sigma=1.291600 ! Fit after self-cal, rms=0.053099Jy sigma=1.291417 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.043 mas, bmaj=9.202 mas, bpa=-12.64 degrees ! Estimated noise=0.56442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187922 Jy ! Component: 100 - total flux cleaned = 0.00029878 Jy ! Component: 150 - total flux cleaned = 0.000266216 Jy ! Component: 200 - total flux cleaned = 0.000237732 Jy ! Total flux subtracted in 200 components = 0.000237732 Jy ! Clean residual min=-0.002738 max=0.003232 Jy/beam ! Clean residual mean=0.000010 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.163048 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 0.163048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053103Jy sigma=1.291276 ! Fit after self-cal, rms=0.053098Jy sigma=1.291179 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.86479e-05 Jy ! Component: 100 - total flux cleaned = -7.33496e-05 Jy ! Component: 150 - total flux cleaned = -7.19838e-05 Jy ! Component: 200 - total flux cleaned = -5.03699e-05 Jy ! Total flux subtracted in 200 components = -5.03699e-05 Jy ! Clean residual min=-0.002752 max=0.003117 Jy/beam ! Clean residual mean=0.000009 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.162997 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.162997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053110Jy sigma=1.291315 ! Fit after self-cal, rms=0.053107Jy sigma=1.291269 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=5.789 mas, bpa=-12.79 degrees ! Estimated noise=0.461823 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 5.789 at -12.79 degrees (North through East) ! Clean map min=-0.0024018 max=0.15681 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=4.82 mas, bpa=-7.951 degrees ! Estimated noise=0.675878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122516 Jy ! Component: 100 - total flux cleaned = 0.149236 Jy ! Component: 150 - total flux cleaned = 0.156597 Jy ! Component: 200 - total flux cleaned = 0.160026 Jy ! Total flux subtracted in 200 components = 0.160026 Jy ! Clean residual min=-0.004084 max=0.004231 Jy/beam ! Clean residual mean=0.000005 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.160026 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.160026 Jy ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=5.789 mas, bpa=-12.79 degrees ! Estimated noise=0.461823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-99, 123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328328 Jy ! Component: 100 - total flux cleaned = 0.00512285 Jy ! Component: 150 - total flux cleaned = 0.00581545 Jy ! Component: 200 - total flux cleaned = 0.00596339 Jy ! Total flux subtracted in 200 components = 0.00596339 Jy ! Clean residual min=-0.002494 max=0.002914 Jy/beam ! Clean residual mean=0.000006 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.165989 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 0.165989 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.043 mas, bmaj=9.202 mas, bpa=-12.64 degrees ! Estimated noise=0.56442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178232 Jy ! Component: 100 - total flux cleaned = -0.000233928 Jy ! Component: 150 - total flux cleaned = -0.000187574 Jy ! Component: 200 - total flux cleaned = -2.0533e-05 Jy ! Total flux subtracted in 200 components = -2.0533e-05 Jy ! Clean residual min=-0.002794 max=0.003071 Jy/beam ! Clean residual mean=0.000010 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.165969 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.94027e-05 Jy ! Component: 100 - total flux cleaned = 0.00011173 Jy ! Component: 150 - total flux cleaned = 0.000111443 Jy ! Component: 200 - total flux cleaned = 0.000143355 Jy ! Total flux subtracted in 200 components = 0.000143355 Jy ! Clean residual min=-0.002683 max=0.002854 Jy/beam ! Clean residual mean=0.000010 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.166112 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 0.166112 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=5.789 mas, bpa=-12.79 degrees ! Estimated noise=0.461823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.6772e-05 Jy ! Component: 100 - total flux cleaned = 0.00016939 Jy ! Component: 150 - total flux cleaned = 0.000127414 Jy ! Component: 200 - total flux cleaned = 0.000129026 Jy ! Total flux subtracted in 200 components = 0.000129026 Jy ! Clean residual min=-0.002523 max=0.002463 Jy/beam ! Clean residual mean=0.000004 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.166241 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 94 components and 0.166241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053057Jy sigma=1.289174 ! Fit after self-cal, rms=0.053042Jy sigma=1.288694 wmodel /scr/pima/bg219h_uvs/J0558+3418_S_map.mod ! Writing 94 model components to file: /scr/pima/bg219h_uvs/J0558+3418_S_map.mod wobs /scr/pima/bg219h_uvs/J0558+3418_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219h_uvs/J0558+3418_S_uvs.fits wwins /scr/pima/bg219h_uvs/J0558+3418_S_map.win ! wwins: Wrote 4 windows to /scr/pima/bg219h_uvs/J0558+3418_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000682492 Jy ! Component: 100 - total flux cleaned = 0.00126331 Jy ! Component: 150 - total flux cleaned = 0.00181078 Jy ! Component: 200 - total flux cleaned = 0.00222034 Jy ! Component: 250 - total flux cleaned = 0.00265074 Jy ! Component: 300 - total flux cleaned = 0.00303249 Jy ! Component: 350 - total flux cleaned = 0.00343648 Jy ! Component: 400 - total flux cleaned = 0.00382912 Jy ! Component: 450 - total flux cleaned = 0.00408336 Jy ! Component: 500 - total flux cleaned = 0.00448505 Jy ! Component: 550 - total flux cleaned = 0.00469651 Jy ! Component: 600 - total flux cleaned = 0.00493202 Jy ! Component: 650 - total flux cleaned = 0.00504793 Jy ! Component: 700 - total flux cleaned = 0.00527335 Jy ! Component: 750 - total flux cleaned = 0.00535587 Jy ! Component: 800 - total flux cleaned = 0.00546407 Jy ! Component: 850 - total flux cleaned = 0.00556978 Jy ! Component: 900 - total flux cleaned = 0.00559585 Jy ! Component: 950 - total flux cleaned = 0.00564692 Jy ! Component: 1000 - total flux cleaned = 0.00569694 Jy ! Component: 1050 - total flux cleaned = 0.00564767 Jy ! Component: 1100 - total flux cleaned = 0.00564848 Jy ! Component: 1150 - total flux cleaned = 0.00560144 Jy ! Component: 1200 - total flux cleaned = 0.00553135 Jy ! Component: 1250 - total flux cleaned = 0.00546201 Jy ! Component: 1300 - total flux cleaned = 0.00539439 Jy ! Component: 1350 - total flux cleaned = 0.00537202 Jy ! Component: 1400 - total flux cleaned = 0.00539369 Jy ! Component: 1450 - total flux cleaned = 0.00534978 Jy ! Component: 1500 - total flux cleaned = 0.00530713 Jy ! Component: 1550 - total flux cleaned = 0.00532892 Jy ! Component: 1600 - total flux cleaned = 0.00532893 Jy ! Component: 1650 - total flux cleaned = 0.00537058 Jy ! Component: 1700 - total flux cleaned = 0.0054933 Jy ! Component: 1750 - total flux cleaned = 0.00551359 Jy ! Component: 1800 - total flux cleaned = 0.00553348 Jy ! Component: 1850 - total flux cleaned = 0.0055335 Jy ! Component: 1900 - total flux cleaned = 0.00559213 Jy ! Component: 1950 - total flux cleaned = 0.00566951 Jy ! Component: 2000 - total flux cleaned = 0.00572659 Jy ! Component: 2050 - total flux cleaned = 0.00566964 Jy ! Component: 2100 - total flux cleaned = 0.00563247 Jy ! Component: 2150 - total flux cleaned = 0.00570616 Jy ! Component: 2200 - total flux cleaned = 0.00570633 Jy ! Component: 2250 - total flux cleaned = 0.00570644 Jy ! Component: 2300 - total flux cleaned = 0.0056528 Jy ! Component: 2350 - total flux cleaned = 0.00565283 Jy ! Component: 2400 - total flux cleaned = 0.00563526 Jy ! Component: 2450 - total flux cleaned = 0.00553101 Jy ! Component: 2500 - total flux cleaned = 0.00553098 Jy ! Component: 2550 - total flux cleaned = 0.00554773 Jy ! Component: 2600 - total flux cleaned = 0.00544604 Jy ! Component: 2650 - total flux cleaned = 0.00544603 Jy ! Component: 2700 - total flux cleaned = 0.00541283 Jy ! Component: 2750 - total flux cleaned = 0.00541284 Jy ! Component: 2800 - total flux cleaned = 0.00533125 Jy ! Component: 2850 - total flux cleaned = 0.00542839 Jy ! Component: 2900 - total flux cleaned = 0.00536395 Jy ! Component: 2950 - total flux cleaned = 0.00533228 Jy ! Component: 3000 - total flux cleaned = 0.00533222 Jy ! Component: 3050 - total flux cleaned = 0.00530085 Jy ! Component: 3100 - total flux cleaned = 0.00526982 Jy ! Component: 3150 - total flux cleaned = 0.00527005 Jy ! Component: 3200 - total flux cleaned = 0.00522405 Jy ! Component: 3250 - total flux cleaned = 0.00525427 Jy ! Component: 3300 - total flux cleaned = 0.00525416 Jy ! Component: 3350 - total flux cleaned = 0.00522415 Jy ! Component: 3400 - total flux cleaned = 0.00525389 Jy ! Component: 3450 - total flux cleaned = 0.00528306 Jy ! Component: 3500 - total flux cleaned = 0.00526842 Jy ! Component: 3550 - total flux cleaned = 0.00526835 Jy ! Component: 3600 - total flux cleaned = 0.005254 Jy ! Component: 3650 - total flux cleaned = 0.0053114 Jy ! Component: 3700 - total flux cleaned = 0.00532558 Jy ! Component: 3750 - total flux cleaned = 0.00531139 Jy ! Component: 3800 - total flux cleaned = 0.00531137 Jy ! Component: 3850 - total flux cleaned = 0.00532527 Jy ! Component: 3900 - total flux cleaned = 0.00524216 Jy ! Component: 3950 - total flux cleaned = 0.00529733 Jy ! Component: 4000 - total flux cleaned = 0.00525625 Jy ! Component: 4050 - total flux cleaned = 0.00521543 Jy ! Total flux subtracted in 4096 components = 0.00514785 Jy ! Clean residual min=-0.000821 max=0.000795 Jy/beam ! Clean residual mean=0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.171389 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 364 components and 0.171389 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219h_uvs/J0558+3418_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 5.789 at -12.79 degrees (North through East) ! Clean map min=-0.0016383 max=0.15572 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0558+3418_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.155715 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237352 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.457282 0.457282 0.914564 1.82913 3.65825 7.31651 14.633 29.266 58.5321 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.155 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 656.05 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J0558+3418_S_uvs.log closed on Thu Apr 7 08:54:33 2016