! Started logfile: /scr/pima/bg219h_uvs/J0555+3922_X_dfm.log on Thu May 19 22:10:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0555+3922_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0555+3922_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.929749 visibilities/baseline/integration-bin.
! Found source: J0555+3922
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 31128 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0555+3922_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.061163Jy  sigma=24.886699
! Fit after  self-cal, rms=0.700368Jy  sigma=16.229927
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7515 mas, bmaj=1.135 mas, bpa=-8.447 degrees
! Estimated noise=0.425736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.214857 Jy
! Component: 100  -  total flux cleaned = 0.290822 Jy
! Total flux subtracted in 100 components = 0.290822 Jy
! Clean residual min=-0.020190 max=0.052626 Jy/beam
! Clean residual mean=0.000001 rms=0.004410 Jy/beam
! Combined flux in latest and established models = 0.290822 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.290822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.120643Jy  sigma=2.750692
! Fit after  self-cal, rms=0.120414Jy  sigma=2.746055
! Inverting map 
! Added new window around map position (1, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525073 Jy
! Component: 100  -  total flux cleaned = 0.0846192 Jy
! Total flux subtracted in 100 components = 0.0846192 Jy
! Clean residual min=-0.013553 max=0.023590 Jy/beam
! Clean residual mean=-0.000000 rms=0.002541 Jy/beam
! Combined flux in latest and established models = 0.375441 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.375441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084703Jy  sigma=1.888336
! Fit after  self-cal, rms=0.083824Jy  sigma=1.869072
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235866 Jy
! Component: 100  -  total flux cleaned = 0.0382522 Jy
! Total flux subtracted in 100 components = 0.0382522 Jy
! Clean residual min=-0.011297 max=0.014484 Jy/beam
! Clean residual mean=-0.000001 rms=0.001871 Jy/beam
! Combined flux in latest and established models = 0.413693 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.413693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074501Jy  sigma=1.641966
! Fit after  self-cal, rms=0.074171Jy  sigma=1.634514
! Inverting map 
! Added new window around map position (4.6, 9.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129032 Jy
! Component: 100  -  total flux cleaned = 0.0156778 Jy
! Total flux subtracted in 100 components = 0.0156778 Jy
! Clean residual min=-0.008887 max=0.009020 Jy/beam
! Clean residual mean=-0.000001 rms=0.001572 Jy/beam
! Combined flux in latest and established models = 0.429371 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.429371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072009Jy  sigma=1.582934
! Fit after  self-cal, rms=0.071901Jy  sigma=1.580858
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.459 mas, bpa=-7.41 degrees
! Estimated noise=0.185105 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.4, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108263 Jy
! Component: 100  -  total flux cleaned = 0.0182088 Jy
! Component: 150  -  total flux cleaned = 0.0229487 Jy
! Component: 200  -  total flux cleaned = 0.0258088 Jy
! Total flux subtracted in 200 components = 0.0258088 Jy
! Clean residual min=-0.004706 max=0.005269 Jy/beam
! Clean residual mean=-0.000004 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.45518 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 46 components and 0.45518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069780Jy  sigma=1.529267
! Fit after  self-cal, rms=0.069633Jy  sigma=1.526166
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.012 x 1.459 at -7.41 degrees (North through East)
! Clean map  min=-0.0040243  max=0.28809 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.94     KP        0.99     
!   LA        0.99     MK        1.03     NL        0.99     OV        1.02     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.95     KP        1.00     
!   LA        0.99     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.95     KP        1.00     
!   LA        1.00     MK        1.01     NL        0.98     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.98     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        0.99     
!   LA        1.00     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.95     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.94     KP        1.00     
!   LA        1.01     MK        1.02     NL        0.98     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.95     KP        1.00     
!   LA        1.00     MK        1.01     NL        0.98     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.96     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.96     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.069633Jy  sigma=1.526166
! Fit after  self-cal, rms=0.068068Jy  sigma=1.517273
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.459 mas, bpa=-7.472 degrees
! Estimated noise=0.183086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164521 Jy
! Component: 100  -  total flux cleaned = 0.00303168 Jy
! Component: 150  -  total flux cleaned = 0.00392541 Jy
! Component: 200  -  total flux cleaned = 0.00458226 Jy
! Total flux subtracted in 200 components = 0.00458226 Jy
! Clean residual min=-0.003845 max=0.004110 Jy/beam
! Clean residual mean=-0.000000 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.459762 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.459762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067588Jy  sigma=1.505780
! Fit after  self-cal, rms=0.067514Jy  sigma=1.504348
! Inverting map 
! Added new window around map position (2.6, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187123 Jy
! Component: 100  -  total flux cleaned = 0.00234765 Jy
! Component: 150  -  total flux cleaned = 0.0026521 Jy
! Component: 200  -  total flux cleaned = 0.00300143 Jy
! Total flux subtracted in 200 components = 0.00300143 Jy
! Clean residual min=-0.003444 max=0.002839 Jy/beam
! Clean residual mean=-0.000000 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.462763 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 0.462763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067153Jy  sigma=1.494993
! Fit after  self-cal, rms=0.067126Jy  sigma=1.494421
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067126Jy  sigma=1.494421
! Fit after  self-cal, rms=0.067038Jy  sigma=1.490187
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.454 mas, bpa=-7.964 degrees
! Estimated noise=0.1828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000883715 Jy
! Component: 100  -  total flux cleaned = 0.00154799 Jy
! Component: 150  -  total flux cleaned = 0.00198369 Jy
! Component: 200  -  total flux cleaned = 0.00230798 Jy
! Total flux subtracted in 200 components = 0.00230798 Jy
! Clean residual min=-0.003102 max=0.002640 Jy/beam
! Clean residual mean=-0.000000 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.465071 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 75 components and 0.465071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066885Jy  sigma=1.486009
! Fit after  self-cal, rms=0.066875Jy  sigma=1.485773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000318378 Jy
! Component: 100  -  total flux cleaned = 0.000558792 Jy
! Component: 150  -  total flux cleaned = 0.00061652 Jy
! Component: 200  -  total flux cleaned = 0.000771071 Jy
! Total flux subtracted in 200 components = 0.000771071 Jy
! Clean residual min=-0.003011 max=0.002457 Jy/beam
! Clean residual mean=-0.000000 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.465842 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 82 components and 0.465842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066792Jy  sigma=1.483425
! Fit after  self-cal, rms=0.066780Jy  sigma=1.483240
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066780Jy  sigma=1.483240
! Fit after  self-cal, rms=0.066752Jy  sigma=1.483049
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.454 mas, bpa=-8.071 degrees
! Estimated noise=0.182674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000438938 Jy
! Component: 100  -  total flux cleaned = 0.000810709 Jy
! Component: 150  -  total flux cleaned = 0.00100384 Jy
! Component: 200  -  total flux cleaned = 0.00113754 Jy
! Total flux subtracted in 200 components = 0.00113754 Jy
! Clean residual min=-0.002825 max=0.002355 Jy/beam
! Clean residual mean=-0.000000 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.46698 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 89 components and 0.46698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066686Jy  sigma=1.481227
! Fit after  self-cal, rms=0.066677Jy  sigma=1.481087
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119079 Jy
! Component: 100  -  total flux cleaned = 0.000291155 Jy
! Component: 150  -  total flux cleaned = 0.000371025 Jy
! Component: 200  -  total flux cleaned = 0.000409612 Jy
! Total flux subtracted in 200 components = 0.000409612 Jy
! Clean residual min=-0.002762 max=0.002249 Jy/beam
! Clean residual mean=0.000000 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.46739 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 94 components and 0.46739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066632Jy  sigma=1.479806
! Fit after  self-cal, rms=0.066623Jy  sigma=1.479686
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066623Jy  sigma=1.479686
! Fit after  self-cal, rms=0.066584Jy  sigma=1.479623
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.179 mas, bmaj=2.485 mas, bpa=-8.01 degrees
! Estimated noise=0.229388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000761645 Jy
! Component: 100  -  total flux cleaned = 0.00116167 Jy
! Component: 150  -  total flux cleaned = 0.00121595 Jy
! Component: 200  -  total flux cleaned = 0.00126272 Jy
! Total flux subtracted in 200 components = 0.00126272 Jy
! Clean residual min=-0.001954 max=0.002105 Jy/beam
! Clean residual mean=0.000000 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.468652 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 105 components and 0.468652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066562Jy  sigma=1.479214
! Fit after  self-cal, rms=0.066554Jy  sigma=1.479092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.69778e-05 Jy
! Component: 100  -  total flux cleaned = 5.36335e-05 Jy
! Component: 150  -  total flux cleaned = 3.33354e-05 Jy
! Component: 200  -  total flux cleaned = 6.92471e-05 Jy
! Total flux subtracted in 200 components = 6.92471e-05 Jy
! Clean residual min=-0.001877 max=0.002051 Jy/beam
! Clean residual mean=0.000000 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.468722 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 113 components and 0.468722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066545Jy  sigma=1.478830
! Fit after  self-cal, rms=0.066536Jy  sigma=1.478688
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.454 mas, bpa=-8.11 degrees
! Estimated noise=0.182586 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.015 x 1.454 at -8.11 degrees (North through East)
! Clean map  min=-0.0046164  max=0.28444 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7532 mas, bmaj=1.133 mas, bpa=-9.186 degrees
! Estimated noise=0.420428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.214368 Jy
! Component: 100  -  total flux cleaned = 0.295931 Jy
! Component: 150  -  total flux cleaned = 0.342695 Jy
! Component: 200  -  total flux cleaned = 0.372874 Jy
! Total flux subtracted in 200 components = 0.372874 Jy
! Clean residual min=-0.010855 max=0.019274 Jy/beam
! Clean residual mean=0.000001 rms=0.002104 Jy/beam
! Combined flux in latest and established models = 0.372874 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.372874 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.454 mas, bpa=-8.11 degrees
! Estimated noise=0.182586 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0281803 Jy
! Component: 100  -  total flux cleaned = 0.0441261 Jy
! Component: 150  -  total flux cleaned = 0.0552804 Jy
! Component: 200  -  total flux cleaned = 0.0636945 Jy
! Total flux subtracted in 200 components = 0.0636945 Jy
! Clean residual min=-0.004311 max=0.006872 Jy/beam
! Clean residual mean=-0.000003 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 0.436568 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 37 components and 0.436568 Jy
! Inverting map 
! Added new window around map position (-1, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00595947 Jy
! Component: 100  -  total flux cleaned = 0.0100948 Jy
! Component: 150  -  total flux cleaned = 0.0132449 Jy
! Component: 200  -  total flux cleaned = 0.0158598 Jy
! Total flux subtracted in 200 components = 0.0158598 Jy
! Clean residual min=-0.003772 max=0.003583 Jy/beam
! Clean residual mean=-0.000001 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.452428 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 65 components and 0.452428 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.179 mas, bmaj=2.485 mas, bpa=-8.01 degrees
! Estimated noise=0.229388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00548466 Jy
! Component: 100  -  total flux cleaned = 0.00917658 Jy
! Component: 150  -  total flux cleaned = 0.0113543 Jy
! Component: 200  -  total flux cleaned = 0.0126142 Jy
! Total flux subtracted in 200 components = 0.0126142 Jy
! Clean residual min=-0.002459 max=0.002417 Jy/beam
! Clean residual mean=0.000000 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.465042 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000950878 Jy
! Component: 100  -  total flux cleaned = 0.00178072 Jy
! Component: 150  -  total flux cleaned = 0.00219972 Jy
! Component: 200  -  total flux cleaned = 0.00252467 Jy
! Total flux subtracted in 200 components = 0.00252467 Jy
! Clean residual min=-0.002134 max=0.002101 Jy/beam
! Clean residual mean=0.000000 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.467567 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 116 components and 0.467567 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.454 mas, bpa=-8.11 degrees
! Estimated noise=0.182586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000145807 Jy
! Component: 100  -  total flux cleaned = -3.26313e-05 Jy
! Component: 150  -  total flux cleaned = 0.000152344 Jy
! Component: 200  -  total flux cleaned = 6.66084e-05 Jy
! Total flux subtracted in 200 components = 6.66084e-05 Jy
! Clean residual min=-0.002403 max=0.002108 Jy/beam
! Clean residual mean=-0.000000 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.467633 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 127 components and 0.467633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066615Jy  sigma=1.478809
! Fit after  self-cal, rms=0.066555Jy  sigma=1.477578
wmodel /J0555+3922_X_map.mod
! wmodel: Unable to open new model file: /J0555+3922_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0555+3922_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.015 x 1.454 at -8.11 degrees (North through East)
! Clean map  min=-0.0040725  max=0.28332 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0555+3922_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.28332 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000450228 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.476734 0.476734 0.953468 1.90694 3.81387 7.62775 15.2555 30.511 61.022
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.283 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  629.281 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0555+3922_X_dfm.log closed on Thu May 19 22:10:40 2016