! Started logfile: /scr/pima/bg219h_uvs/J0544+1118_X_dfm.log on Thu May 19 22:10:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0544+1118_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0544+1118_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.859745 visibilities/baseline/integration-bin.
! Found source: J0544+1118
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 28320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0544+1118_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006601Jy  sigma=25.488945
! Fit after  self-cal, rms=0.938114Jy  sigma=23.720154
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.807 mas, bmaj=1.733 mas, bpa=-2.425 degrees
! Estimated noise=0.349664 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0445417 Jy
! Component: 100  -  total flux cleaned = 0.0627094 Jy
! Total flux subtracted in 100 components = 0.0627094 Jy
! Clean residual min=-0.003395 max=0.008775 Jy/beam
! Clean residual mean=-0.000003 rms=0.001008 Jy/beam
! Combined flux in latest and established models = 0.0627094 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0627094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062808Jy  sigma=1.479819
! Fit after  self-cal, rms=0.061679Jy  sigma=1.454219
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110761 Jy
! Component: 100  -  total flux cleaned = 0.0172609 Jy
! Total flux subtracted in 100 components = 0.0172609 Jy
! Clean residual min=-0.002814 max=0.003281 Jy/beam
! Clean residual mean=-0.000002 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.0799703 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.0799703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059123Jy  sigma=1.380698
! Fit after  self-cal, rms=0.059070Jy  sigma=1.379505
! Inverting map 
! Added new window around map position (0.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00418915 Jy
! Component: 100  -  total flux cleaned = 0.00678094 Jy
! Total flux subtracted in 100 components = 0.00678094 Jy
! Clean residual min=-0.002577 max=0.002604 Jy/beam
! Clean residual mean=-0.000001 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.0867512 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 0.0867512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058690Jy  sigma=1.368895
! Fit after  self-cal, rms=0.058664Jy  sigma=1.368282
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9759 mas, bmaj=2.029 mas, bpa=-1.917 degrees
! Estimated noise=0.178285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258035 Jy
! Component: 100  -  total flux cleaned = 0.00402178 Jy
! Component: 150  -  total flux cleaned = 0.00489446 Jy
! Component: 200  -  total flux cleaned = 0.00531583 Jy
! Total flux subtracted in 200 components = 0.00531583 Jy
! Clean residual min=-0.001353 max=0.001743 Jy/beam
! Clean residual mean=-0.000003 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.092067 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 36 components and 0.092067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058546Jy  sigma=1.365315
! Fit after  self-cal, rms=0.058546Jy  sigma=1.365191
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9759 x 2.029 at -1.917 degrees (North through East)
! Clean map  min=-0.0012791  max=0.064295 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.93     KP        0.99     
!   LA        0.98     MK        1.15     NL        1.06     OV        1.03     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.95     KP        1.01     
!   LA        0.96     MK        1.12     NL        1.03     OV        1.01     
!   PT        1.02     SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.12     NL        1.00     OV        1.06     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.92     KP        0.97     
!   LA        1.02     MK        1.03     NL        0.99     OV        1.07     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.93     KP        0.96     
!   LA        0.98     MK        1.15     NL        1.05     OV        1.04     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.87     KP        1.02     
!   LA        1.00     MK        1.03     NL        1.01     OV        1.01     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.87     KP        1.04     
!   LA        1.00     MK        1.03     NL        0.99     OV        1.01     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.94     KP        1.03     
!   LA        1.02     MK        1.08     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.87     KP        0.97     
!   LA        0.98     MK        0.94     NL        0.98     OV        1.04     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.91     KP        1.01     
!   LA        0.97     MK        1.00     NL        1.06     OV        1.03     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.89     KP        1.02     
!   LA        0.94     MK        0.97     NL        1.00     OV        1.04     
!   PT        0.96     SC        0.85     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.058546Jy  sigma=1.365191
! Fit after  self-cal, rms=0.057395Jy  sigma=1.361871
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9813 mas, bmaj=2.034 mas, bpa=-1.468 degrees
! Estimated noise=0.178395 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363189 Jy
! Component: 100  -  total flux cleaned = 0.000377888 Jy
! Component: 150  -  total flux cleaned = 0.000402757 Jy
! Component: 200  -  total flux cleaned = 0.000442557 Jy
! Total flux subtracted in 200 components = 0.000442557 Jy
! Clean residual min=-0.001131 max=0.001325 Jy/beam
! Clean residual mean=-0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0925096 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.0925096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057387Jy  sigma=1.361708
! Fit after  self-cal, rms=0.057369Jy  sigma=1.361551
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057369Jy  sigma=1.361551
! Fit after  self-cal, rms=0.057278Jy  sigma=1.359404
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9788 mas, bmaj=2.036 mas, bpa=-1.716 degrees
! Estimated noise=0.178309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152602 Jy
! Component: 100  -  total flux cleaned = 0.00016313 Jy
! Component: 150  -  total flux cleaned = 0.000189437 Jy
! Component: 200  -  total flux cleaned = 0.000211986 Jy
! Total flux subtracted in 200 components = 0.000211986 Jy
! Clean residual min=-0.001091 max=0.001186 Jy/beam
! Clean residual mean=-0.000002 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0927216 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 51 components and 0.0927216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057274Jy  sigma=1.359332
! Fit after  self-cal, rms=0.057274Jy  sigma=1.359236
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.4, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126999 Jy
! Component: 100  -  total flux cleaned = 0.00200417 Jy
! Component: 150  -  total flux cleaned = 0.00233517 Jy
! Component: 200  -  total flux cleaned = 0.00252975 Jy
! Total flux subtracted in 200 components = 0.00252975 Jy
! Clean residual min=-0.001032 max=0.000967 Jy/beam
! Clean residual mean=-0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0952513 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 76 components and 0.0952513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057244Jy  sigma=1.358364
! Fit after  self-cal, rms=0.057240Jy  sigma=1.358226
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057240Jy  sigma=1.358226
! Fit after  self-cal, rms=0.057206Jy  sigma=1.358186
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9785 mas, bmaj=2.037 mas, bpa=-1.642 degrees
! Estimated noise=0.178273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000605902 Jy
! Component: 100  -  total flux cleaned = 0.000771005 Jy
! Component: 150  -  total flux cleaned = 0.000868863 Jy
! Component: 200  -  total flux cleaned = 0.00094244 Jy
! Total flux subtracted in 200 components = 0.00094244 Jy
! Clean residual min=-0.001016 max=0.000965 Jy/beam
! Clean residual mean=-0.000001 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0961938 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.0961938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057197Jy  sigma=1.357947
! Fit after  self-cal, rms=0.057196Jy  sigma=1.357919
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228083 Jy
! Component: 100  -  total flux cleaned = 0.000298281 Jy
! Component: 150  -  total flux cleaned = 0.000372926 Jy
! Component: 200  -  total flux cleaned = 0.000431974 Jy
! Total flux subtracted in 200 components = 0.000431974 Jy
! Clean residual min=-0.000996 max=0.000983 Jy/beam
! Clean residual mean=-0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0966257 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 91 components and 0.0966257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057192Jy  sigma=1.357817
! Fit after  self-cal, rms=0.057191Jy  sigma=1.357812
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057191Jy  sigma=1.357812
! Fit after  self-cal, rms=0.057196Jy  sigma=1.357793
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.013 mas, bmaj=3 mas, bpa=-5.358 degrees
! Estimated noise=0.22208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000499002 Jy
! Component: 100  -  total flux cleaned = 0.00067933 Jy
! Component: 150  -  total flux cleaned = 0.000749509 Jy
! Component: 200  -  total flux cleaned = 0.000798397 Jy
! Total flux subtracted in 200 components = 0.000798397 Jy
! Clean residual min=-0.001072 max=0.001036 Jy/beam
! Clean residual mean=-0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.0974241 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 94 components and 0.0974241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057196Jy  sigma=1.357757
! Fit after  self-cal, rms=0.057196Jy  sigma=1.357733
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.04367e-05 Jy
! Component: 100  -  total flux cleaned = 9.46918e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100873 Jy
! Component: 200  -  total flux cleaned = 0.000106375 Jy
! Total flux subtracted in 200 components = 0.000106375 Jy
! Clean residual min=-0.001051 max=0.001048 Jy/beam
! Clean residual mean=-0.000001 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.0975305 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 100 components and 0.0975305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057196Jy  sigma=1.357727
! Fit after  self-cal, rms=0.057195Jy  sigma=1.357717
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9785 mas, bmaj=2.037 mas, bpa=-1.609 degrees
! Estimated noise=0.178293 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9785 x 2.037 at -1.609 degrees (North through East)
! Clean map  min=-0.00092123  max=0.06422 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8085 mas, bmaj=1.741 mas, bpa=-2.004 degrees
! Estimated noise=0.349476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.045107 Jy
! Component: 100  -  total flux cleaned = 0.0644341 Jy
! Component: 150  -  total flux cleaned = 0.075143 Jy
! Component: 200  -  total flux cleaned = 0.0811634 Jy
! Total flux subtracted in 200 components = 0.0811634 Jy
! Clean residual min=-0.002495 max=0.003064 Jy/beam
! Clean residual mean=-0.000002 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.0811633 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0811633 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9785 mas, bmaj=2.037 mas, bpa=-1.609 degrees
! Estimated noise=0.178293 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00518283 Jy
! Component: 100  -  total flux cleaned = 0.00807931 Jy
! Component: 150  -  total flux cleaned = 0.0101251 Jy
! Component: 200  -  total flux cleaned = 0.0116212 Jy
! Total flux subtracted in 200 components = 0.0116212 Jy
! Clean residual min=-0.001288 max=0.001234 Jy/beam
! Clean residual mean=-0.000002 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.0927846 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 34 components and 0.0927846 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.013 mas, bmaj=3 mas, bpa=-5.358 degrees
! Estimated noise=0.22208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181443 Jy
! Component: 100  -  total flux cleaned = 0.0029515 Jy
! Component: 150  -  total flux cleaned = 0.0036973 Jy
! Component: 200  -  total flux cleaned = 0.00414621 Jy
! Total flux subtracted in 200 components = 0.00414621 Jy
! Clean residual min=-0.001128 max=0.001022 Jy/beam
! Clean residual mean=-0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.0969308 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019123 Jy
! Component: 100  -  total flux cleaned = 0.000349421 Jy
! Component: 150  -  total flux cleaned = 0.000439811 Jy
! Component: 200  -  total flux cleaned = 0.000492444 Jy
! Total flux subtracted in 200 components = 0.000492444 Jy
! Clean residual min=-0.001092 max=0.001042 Jy/beam
! Clean residual mean=-0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0974233 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 64 components and 0.0974233 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9785 mas, bmaj=2.037 mas, bpa=-1.609 degrees
! Estimated noise=0.178293 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.49095e-05 Jy
! Component: 100  -  total flux cleaned = -8.28322e-05 Jy
! Component: 150  -  total flux cleaned = -0.000201173 Jy
! Component: 200  -  total flux cleaned = -0.000219638 Jy
! Total flux subtracted in 200 components = -0.000219638 Jy
! Clean residual min=-0.001064 max=0.001090 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0972036 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.0972036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057212Jy  sigma=1.358048
! Fit after  self-cal, rms=0.057206Jy  sigma=1.357975
wmodel /J0544+1118_X_map.mod
! wmodel: Unable to open new model file: /J0544+1118_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0544+1118_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9785 x 2.037 at -1.609 degrees (North through East)
! Clean map  min=-0.0009502  max=0.064391 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0544+1118_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0643913 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000238629 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.11177 1.11177 2.22355 4.4471 8.89419 17.7884 35.5768 71.1535
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.064 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  269.839 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0544+1118_X_dfm.log closed on Thu May 19 22:10:08 2016