! Started logfile: /scr/pima/bg219h_uvs/J0538-4405_S_uvs.log on Thu Apr  7 08:53:48 2016
obs /scr/pima/bg219h_uvs/J0538-4405_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0538-4405_S_uva.fits
! AN table 1: 7 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.790476 visibilities/baseline/integration-bin.
! Found source: J0538-4405
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 332 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J0538-4405_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.743040Jy  sigma=17.590108
! Fit after  self-cal, rms=1.678617Jy  sigma=10.990975
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.54 mas, bmaj=44.49 mas, bpa=-8.126 degrees
! Estimated noise=9.56257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.742 Jy
! Component: 100  -  total flux cleaned = 2.18931 Jy
! Total flux subtracted in 100 components = 2.18931 Jy
! Clean residual min=-0.156476 max=0.220570 Jy/beam
! Clean residual mean=0.002589 rms=0.067273 Jy/beam
! Combined flux in latest and established models = 2.18931 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 2.18931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.666038Jy  sigma=4.187781
! Fit after  self-cal, rms=0.665973Jy  sigma=4.187496
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.995 mas, bmaj=38.71 mas, bpa=-8.08 degrees
! Estimated noise=8.17139 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.435124 Jy
! Component: 100  -  total flux cleaned = 0.65206 Jy
! Component: 150  -  total flux cleaned = 0.687967 Jy
! Component: 200  -  total flux cleaned = 0.684496 Jy
! Total flux subtracted in 200 components = 0.684496 Jy
! Clean residual min=-0.048181 max=0.048026 Jy/beam
! Clean residual mean=0.002563 rms=0.020708 Jy/beam
! Combined flux in latest and established models = 2.8738 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 61 components and 2.8738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134402Jy  sigma=0.912401
! Fit after  self-cal, rms=0.133252Jy  sigma=0.909118
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.995 x 38.71 at -8.08 degrees (North through East)
! Clean map  min=-0.068423  max=2.3597 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        0.96     LA        1.00     MK        1.00     
!   OV        0.97     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        0.98     LA        1.01     MK        1.02     
!   OV        0.97     PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        0.97     LA        0.98     MK        1.00     
!   OV        1.00     PT        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        0.99     LA        0.99     MK        1.03     
!   OV        1.00     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.133252Jy  sigma=0.909118
! Fit after  self-cal, rms=0.114696Jy  sigma=0.661660
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.015 mas, bmaj=38.68 mas, bpa=-8.076 degrees
! Estimated noise=8.05449 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153124 Jy
! Component: 100  -  total flux cleaned = 0.0214173 Jy
! Component: 150  -  total flux cleaned = 0.0225713 Jy
! Component: 200  -  total flux cleaned = 0.0213796 Jy
! Total flux subtracted in 200 components = 0.0213796 Jy
! Clean residual min=-0.006648 max=0.006601 Jy/beam
! Clean residual mean=0.000149 rms=0.002361 Jy/beam
! Combined flux in latest and established models = 2.89518 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 122 components and 2.89518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103607Jy  sigma=0.616568
! Fit after  self-cal, rms=0.103557Jy  sigma=0.615732
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103557Jy  sigma=0.615732
! Fit after  self-cal, rms=0.099750Jy  sigma=0.593525
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.015 mas, bmaj=38.66 mas, bpa=-8.073 degrees
! Estimated noise=8.0541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000685398 Jy
! Component: 100  -  total flux cleaned = 0.000454354 Jy
! Component: 150  -  total flux cleaned = -0.00107247 Jy
! Component: 200  -  total flux cleaned = -0.000374411 Jy
! Total flux subtracted in 200 components = -0.000374411 Jy
! Clean residual min=-0.003861 max=0.003856 Jy/beam
! Clean residual mean=0.000011 rms=0.001451 Jy/beam
! Combined flux in latest and established models = 2.89481 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 175 components and 2.89481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097751Jy  sigma=0.584822
! Fit after  self-cal, rms=0.097737Jy  sigma=0.584243
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219302 Jy
! Component: 100  -  total flux cleaned = 0.00525327 Jy
! Component: 150  -  total flux cleaned = 0.00746418 Jy
! Component: 200  -  total flux cleaned = 0.00769961 Jy
! Total flux subtracted in 200 components = 0.00769961 Jy
! Clean residual min=-0.001948 max=0.001975 Jy/beam
! Clean residual mean=0.000029 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 2.90251 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 217 components and 2.90251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097242Jy  sigma=0.582290
! Fit after  self-cal, rms=0.097237Jy  sigma=0.582116
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097237Jy  sigma=0.582116
! Fit after  self-cal, rms=0.096658Jy  sigma=0.577091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.015 mas, bmaj=38.64 mas, bpa=-8.073 degrees
! Estimated noise=8.04579 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244566 Jy
! Component: 100  -  total flux cleaned = 0.00229383 Jy
! Component: 150  -  total flux cleaned = 0.000989316 Jy
! Component: 200  -  total flux cleaned = 0.000415237 Jy
! Total flux subtracted in 200 components = 0.000415237 Jy
! Clean residual min=-0.001808 max=0.001805 Jy/beam
! Clean residual mean=0.000017 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 2.90292 Jy
selfcal
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 286 components and 2.90292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095953Jy  sigma=0.575420
! Fit after  self-cal, rms=0.095955Jy  sigma=0.575309
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000986153 Jy
! Component: 100  -  total flux cleaned = 0.00179491 Jy
! Component: 150  -  total flux cleaned = 0.00196742 Jy
! Component: 200  -  total flux cleaned = 0.00164684 Jy
! Total flux subtracted in 200 components = 0.00164684 Jy
! Clean residual min=-0.001325 max=0.001354 Jy/beam
! Clean residual mean=-0.000001 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 2.90457 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 331 components and 2.90457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095767Jy  sigma=0.574724
! Fit after  self-cal, rms=0.095765Jy  sigma=0.574629
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095765Jy  sigma=0.574629
! Fit after  self-cal, rms=0.095814Jy  sigma=0.572853
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.139 mas, bmaj=37 mas, bpa=-1.341 degrees
! Estimated noise=12.3311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102544 Jy
! Component: 100  -  total flux cleaned = 0.000187167 Jy
! Component: 150  -  total flux cleaned = 6.0136e-05 Jy
! Component: 200  -  total flux cleaned = 0.00120127 Jy
! Total flux subtracted in 200 components = 0.00120127 Jy
! Clean residual min=-0.002393 max=0.002494 Jy/beam
! Clean residual mean=-0.000047 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 2.90577 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 384 components and 2.90577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095241Jy  sigma=0.574319
! Fit after  self-cal, rms=0.095237Jy  sigma=0.574065
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000983472 Jy
! Component: 100  -  total flux cleaned = 0.000560989 Jy
! Component: 150  -  total flux cleaned = 0.0012985 Jy
! Component: 200  -  total flux cleaned = 0.0017869 Jy
! Total flux subtracted in 200 components = 0.0017869 Jy
! Clean residual min=-0.001219 max=0.001222 Jy/beam
! Clean residual mean=-0.000025 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 2.90756 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 462 components and 2.90756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095157Jy  sigma=0.573593
! Fit after  self-cal, rms=0.095165Jy  sigma=0.573505
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=38.61 mas, bpa=-8.073 degrees
! Estimated noise=8.03711 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.016 x 38.61 at -8.073 degrees (North through East)
! Clean map  min=-0.022028  max=2.3233 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095165Jy  sigma=0.573505
! Fit after  self-cal, rms=0.059719Jy  sigma=0.319263
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=38.61 mas, bpa=-8.075 degrees
! Estimated noise=8.03695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175787 Jy
! Component: 100  -  total flux cleaned = 0.00104878 Jy
! Component: 150  -  total flux cleaned = 0.000540491 Jy
! Component: 200  -  total flux cleaned = 0.000255089 Jy
! Total flux subtracted in 200 components = 0.000255089 Jy
! Clean residual min=-0.001543 max=0.001581 Jy/beam
! Clean residual mean=-0.000030 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 2.90781 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 524 components and 2.90781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059181Jy  sigma=0.316140
! Fit after  self-cal, rms=0.059126Jy  sigma=0.315794
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140535 Jy
! Component: 100  -  total flux cleaned = -0.000103287 Jy
! Component: 150  -  total flux cleaned = -0.000160047 Jy
! Component: 200  -  total flux cleaned = -0.000115202 Jy
! Total flux subtracted in 200 components = -0.000115202 Jy
! Clean residual min=-0.000779 max=0.000774 Jy/beam
! Clean residual mean=0.000014 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 2.9077 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 579 components and 2.9077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058991Jy  sigma=0.315027
! Fit after  self-cal, rms=0.058999Jy  sigma=0.314904
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058999Jy  sigma=0.314904
! Fit after  self-cal, rms=0.058583Jy  sigma=0.313236
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.549 mas, bmaj=44.38 mas, bpa=-8.128 degrees
! Estimated noise=9.47232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.72549 Jy
! Component: 100  -  total flux cleaned = 2.15932 Jy
! Component: 150  -  total flux cleaned = 2.41686 Jy
! Component: 200  -  total flux cleaned = 2.58851 Jy
! Total flux subtracted in 200 components = 2.58851 Jy
! Clean residual min=-0.068791 max=0.093336 Jy/beam
! Clean residual mean=0.001574 rms=0.029149 Jy/beam
! Combined flux in latest and established models = 2.58851 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 2.58851 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=38.61 mas, bpa=-8.075 degrees
! Estimated noise=8.03521 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.188942 Jy
! Component: 100  -  total flux cleaned = 0.234154 Jy
! Component: 150  -  total flux cleaned = 0.221224 Jy
! Component: 200  -  total flux cleaned = 0.219332 Jy
! Total flux subtracted in 200 components = 0.219332 Jy
! Clean residual min=-0.030555 max=0.030817 Jy/beam
! Clean residual mean=0.001706 rms=0.013523 Jy/beam
! Combined flux in latest and established models = 2.80784 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 88 components and 2.80784 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.141 mas, bmaj=37 mas, bpa=-1.346 degrees
! Estimated noise=12.3241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178349 Jy
! Component: 100  -  total flux cleaned = 0.0505291 Jy
! Component: 150  -  total flux cleaned = 0.0560148 Jy
! Component: 200  -  total flux cleaned = 0.0505868 Jy
! Total flux subtracted in 200 components = 0.0505868 Jy
! Clean residual min=-0.022805 max=0.022683 Jy/beam
! Clean residual mean=0.000398 rms=0.007283 Jy/beam
! Combined flux in latest and established models = 2.85843 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153638 Jy
! Component: 100  -  total flux cleaned = 0.00484958 Jy
! Component: 150  -  total flux cleaned = 0.00666162 Jy
! Component: 200  -  total flux cleaned = 0.00680565 Jy
! Total flux subtracted in 200 components = 0.00680565 Jy
! Clean residual min=-0.039889 max=0.039453 Jy/beam
! Clean residual mean=-0.000647 rms=0.015085 Jy/beam
! Combined flux in latest and established models = 2.86523 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 159 components and 2.86524 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=38.61 mas, bpa=-8.075 degrees
! Estimated noise=8.03521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.42781e-05 Jy
! Component: 100  -  total flux cleaned = 0.00366203 Jy
! Component: 150  -  total flux cleaned = 0.00863666 Jy
! Component: 200  -  total flux cleaned = 0.00869388 Jy
! Total flux subtracted in 200 components = 0.00869388 Jy
! Clean residual min=-0.027052 max=0.026752 Jy/beam
! Clean residual mean=0.000349 rms=0.008186 Jy/beam
! Combined flux in latest and established models = 2.87393 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 175 components and 2.87393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079711Jy  sigma=0.468882
! Fit after  self-cal, rms=0.073756Jy  sigma=0.431465
wmodel /scr/pima/bg219h_uvs/J0538-4405_S_map.mod
! Writing 175 model components to file: /scr/pima/bg219h_uvs/J0538-4405_S_map.mod
wobs /scr/pima/bg219h_uvs/J0538-4405_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J0538-4405_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J0538-4405_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bg219h_uvs/J0538-4405_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.016 x 38.61 at -8.075 degrees (North through East)
! Clean map  min=-0.037408  max=2.279 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0538-4405_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.27902 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00688221 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.905944 0.905944 1.81189 3.62378 7.24755 14.4951 28.9902 57.9804
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0206 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.279 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  331.146 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0538-4405_S_uvs.log closed on Thu Apr  7 08:53:50 2016