! Started logfile: /scr/pima/bg219h_uvs/J0526+6317_S_dfm.log on Thu May 19 22:09:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J0526+6317_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0526+6317_S_uva.fits
! AN table 1: 77 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.647186 visibilities/baseline/integration-bin.
! Found source: J0526+6317
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7176 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0526+6317_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 155 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 155 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 155 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 155 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000951Jy  sigma=24.324182
! Fit after  self-cal, rms=0.945324Jy  sigma=22.951479
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.785 mas, bmaj=4.39 mas, bpa=-51.67 degrees
! Estimated noise=0.610972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0430915 Jy
! Component: 100  -  total flux cleaned = 0.0524913 Jy
! Total flux subtracted in 100 components = 0.0524913 Jy
! Clean residual min=-0.003352 max=0.003360 Jy/beam
! Clean residual mean=0.000001 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.0524913 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0524913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059162Jy  sigma=1.358187
! Fit after  self-cal, rms=0.058258Jy  sigma=1.338443
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.287 mas, bmaj=5.084 mas, bpa=-51.97 degrees
! Estimated noise=0.364356 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00439504 Jy
! Component: 100  -  total flux cleaned = 0.00631315 Jy
! Component: 150  -  total flux cleaned = 0.00740334 Jy
! Component: 200  -  total flux cleaned = 0.00805592 Jy
! Total flux subtracted in 200 components = 0.00805592 Jy
! Clean residual min=-0.002180 max=0.002114 Jy/beam
! Clean residual mean=-0.000000 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.0605472 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 24 components and 0.0605472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057965Jy  sigma=1.330424
! Fit after  self-cal, rms=0.057971Jy  sigma=1.330208
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.287 x 5.084 at -51.97 degrees (North through East)
! Clean map  min=-0.0020893  max=0.057387 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.04     KP        0.97     LA        0.98     
!   MK        1.02     NL        0.95     OV        0.98     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.98     KP        1.06     LA        0.99     
!   MK        1.00     NL        0.91     OV        0.97     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        1.01     KP        0.99     LA        1.11     
!   MK        1.04     NL        0.99     OV        0.96     PT        1.04     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     HN        0.96     KP        1.06     LA        1.06     
!   MK        0.98     NL        0.93     OV        1.08     PT        1.01     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.057971Jy  sigma=1.330208
! Fit after  self-cal, rms=0.058080Jy  sigma=1.329674
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.31 mas, bmaj=5.089 mas, bpa=-52.43 degrees
! Estimated noise=0.363584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208177 Jy
! Component: 100  -  total flux cleaned = 0.000227127 Jy
! Component: 150  -  total flux cleaned = 0.000275294 Jy
! Component: 200  -  total flux cleaned = 0.000333035 Jy
! Total flux subtracted in 200 components = 0.000333035 Jy
! Clean residual min=-0.001964 max=0.002086 Jy/beam
! Clean residual mean=-0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.0608802 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 29 components and 0.0608802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058069Jy  sigma=1.329345
! Fit after  self-cal, rms=0.058106Jy  sigma=1.329125
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058106Jy  sigma=1.329125
! Fit after  self-cal, rms=0.058157Jy  sigma=1.326719
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.311 mas, bmaj=5.078 mas, bpa=-52.49 degrees
! Estimated noise=0.363822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014464 Jy
! Component: 100  -  total flux cleaned = 0.000129946 Jy
! Component: 150  -  total flux cleaned = 0.000154681 Jy
! Component: 200  -  total flux cleaned = 0.00017758 Jy
! Total flux subtracted in 200 components = 0.00017758 Jy
! Clean residual min=-0.001650 max=0.001915 Jy/beam
! Clean residual mean=0.000000 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.0610578 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 35 components and 0.0610578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058148Jy  sigma=1.326498
! Fit after  self-cal, rms=0.058163Jy  sigma=1.326280
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-83, -118).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000542198 Jy
! Component: 100  -  total flux cleaned = 0.000413051 Jy
! Component: 150  -  total flux cleaned = 0.000377696 Jy
! Component: 200  -  total flux cleaned = 0.000408584 Jy
! Total flux subtracted in 200 components = 0.000408584 Jy
! Clean residual min=-0.001620 max=0.001915 Jy/beam
! Clean residual mean=-0.000000 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.0614664 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 55 components and 0.0614664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058091Jy  sigma=1.324718
! Fit after  self-cal, rms=0.058083Jy  sigma=1.324478
! Inverting map 
! Added new window around map position (-30.5, 109.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128479 Jy
! Component: 100  -  total flux cleaned = 0.00125064 Jy
! Component: 150  -  total flux cleaned = 0.00128156 Jy
! Component: 200  -  total flux cleaned = 0.00130702 Jy
! Total flux subtracted in 200 components = 0.00130702 Jy
! Clean residual min=-0.001563 max=0.001711 Jy/beam
! Clean residual mean=0.000000 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0627734 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 68 components and 0.0627734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058025Jy  sigma=1.323185
! Fit after  self-cal, rms=0.058023Jy  sigma=1.322957
! Inverting map 
! Added new window around map position (-6, -64).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000535519 Jy
! Component: 100  -  total flux cleaned = 0.000418627 Jy
! Component: 150  -  total flux cleaned = 0.000324203 Jy
! Component: 200  -  total flux cleaned = 0.000325211 Jy
! Total flux subtracted in 200 components = 0.000325211 Jy
! Clean residual min=-0.001595 max=0.001573 Jy/beam
! Clean residual mean=-0.000000 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0630986 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.0630986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057960Jy  sigma=1.321582
! Fit after  self-cal, rms=0.057949Jy  sigma=1.321372
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057949Jy  sigma=1.321372
! Fit after  self-cal, rms=0.057906Jy  sigma=1.321018
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.309 mas, bmaj=5.067 mas, bpa=-52.42 degrees
! Estimated noise=0.363717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000457047 Jy
! Component: 100  -  total flux cleaned = 0.000528312 Jy
! Component: 150  -  total flux cleaned = 0.000442193 Jy
! Component: 200  -  total flux cleaned = 0.000286231 Jy
! Total flux subtracted in 200 components = 0.000286231 Jy
! Clean residual min=-0.001458 max=0.001489 Jy/beam
! Clean residual mean=0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.0633848 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 85 components and 0.0633848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057874Jy  sigma=1.320280
! Fit after  self-cal, rms=0.057878Jy  sigma=1.320199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118043 Jy
! Component: 100  -  total flux cleaned = 1.91888e-05 Jy
! Component: 150  -  total flux cleaned = -0.000166176 Jy
! Component: 200  -  total flux cleaned = -0.000253436 Jy
! Total flux subtracted in 200 components = -0.000253436 Jy
! Clean residual min=-0.001441 max=0.001498 Jy/beam
! Clean residual mean=0.000000 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0631314 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 93 components and 0.0631314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057859Jy  sigma=1.319787
! Fit after  self-cal, rms=0.057858Jy  sigma=1.319762
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057858Jy  sigma=1.319762
! Fit after  self-cal, rms=0.057925Jy  sigma=1.319688
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.053 mas, bmaj=8.621 mas, bpa=-79.39 degrees
! Estimated noise=0.467248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.96995e-06 Jy
! Component: 100  -  total flux cleaned = 8.66854e-05 Jy
! Component: 150  -  total flux cleaned = 8.69384e-05 Jy
! Component: 200  -  total flux cleaned = 8.8175e-05 Jy
! Total flux subtracted in 200 components = 8.8175e-05 Jy
! Clean residual min=-0.001338 max=0.001434 Jy/beam
! Clean residual mean=0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0632196 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 112 components and 0.0632196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057919Jy  sigma=1.319540
! Fit after  self-cal, rms=0.057925Jy  sigma=1.319498
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.20343e-06 Jy
! Component: 100  -  total flux cleaned = 2.50021e-05 Jy
! Component: 150  -  total flux cleaned = 2.58317e-05 Jy
! Component: 200  -  total flux cleaned = 2.59381e-05 Jy
! Total flux subtracted in 200 components = 2.59381e-05 Jy
! Clean residual min=-0.001330 max=0.001431 Jy/beam
! Clean residual mean=0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0632455 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 126 components and 0.0632455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057922Jy  sigma=1.319402
! Fit after  self-cal, rms=0.057921Jy  sigma=1.319379
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=5.064 mas, bpa=-52.38 degrees
! Estimated noise=0.363862 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.307 x 5.064 at -52.38 degrees (North through East)
! Clean map  min=-0.0020061  max=0.057033 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.785 mas, bmaj=4.385 mas, bpa=-51.6 degrees
! Estimated noise=0.611735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0436224 Jy
! Component: 100  -  total flux cleaned = 0.0533096 Jy
! Component: 150  -  total flux cleaned = 0.0558135 Jy
! Component: 200  -  total flux cleaned = 0.0579747 Jy
! Total flux subtracted in 200 components = 0.0579747 Jy
! Clean residual min=-0.003078 max=0.003250 Jy/beam
! Clean residual mean=0.000000 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.0579747 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0579747 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=5.064 mas, bpa=-52.38 degrees
! Estimated noise=0.363862 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032674 Jy
! Component: 100  -  total flux cleaned = 0.00446399 Jy
! Component: 150  -  total flux cleaned = 0.005034 Jy
! Component: 200  -  total flux cleaned = 0.00521869 Jy
! Total flux subtracted in 200 components = 0.00521869 Jy
! Clean residual min=-0.001677 max=0.001810 Jy/beam
! Clean residual mean=0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.0631934 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 35 components and 0.0631934 Jy
! Inverting map 
! Added new window around map position (-112.5, -79).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159089 Jy
! Component: 100  -  total flux cleaned = -8.08166e-07 Jy
! Component: 150  -  total flux cleaned = -9.50465e-05 Jy
! Component: 200  -  total flux cleaned = -0.0001814 Jy
! Total flux subtracted in 200 components = -0.0001814 Jy
! Clean residual min=-0.001545 max=0.001587 Jy/beam
! Clean residual mean=0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.063012 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 52 components and 0.063012 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.053 mas, bmaj=8.621 mas, bpa=-79.39 degrees
! Estimated noise=0.467248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00035197 Jy
! Component: 100  -  total flux cleaned = 0.000319745 Jy
! Component: 150  -  total flux cleaned = 0.000405507 Jy
! Component: 200  -  total flux cleaned = 0.000407489 Jy
! Total flux subtracted in 200 components = 0.000407489 Jy
! Clean residual min=-0.001267 max=0.001361 Jy/beam
! Clean residual mean=0.000002 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.0634195 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.99924e-05 Jy
! Component: 100  -  total flux cleaned = 2.232e-05 Jy
! Component: 150  -  total flux cleaned = 5.66374e-05 Jy
! Component: 200  -  total flux cleaned = 7.28376e-05 Jy
! Total flux subtracted in 200 components = 7.28376e-05 Jy
! Clean residual min=-0.001293 max=0.001370 Jy/beam
! Clean residual mean=0.000002 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0634923 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 109 components and 0.0634923 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=5.064 mas, bpa=-52.38 degrees
! Estimated noise=0.363862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.93889e-06 Jy
! Component: 100  -  total flux cleaned = -4.20331e-05 Jy
! Component: 150  -  total flux cleaned = -0.000163944 Jy
! Component: 200  -  total flux cleaned = -0.000192871 Jy
! Total flux subtracted in 200 components = -0.000192871 Jy
! Clean residual min=-0.001450 max=0.001527 Jy/beam
! Clean residual mean=0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0632994 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.0632994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057909Jy  sigma=1.318956
! Fit after  self-cal, rms=0.057903Jy  sigma=1.318653
wmodel /J0526+6317_S_map.mod
! wmodel: Unable to open new model file: /J0526+6317_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0526+6317_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.307 x 5.064 at -52.38 degrees (North through East)
! Clean map  min=-0.0021379  max=0.056844 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0526+6317_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0568437 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000350764 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.8512 1.8512 3.70241 7.40481 14.8096 29.6192 59.2385
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.056 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  162.056 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0526+6317_S_dfm.log closed on Thu May 19 22:09:14 2016