! Started logfile: /scr/pima/bg219h_uvs/J0512+2927_X_dfm.log on Thu May 19 22:08:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J0512+2927_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J0512+2927_X_uva.fits
! AN table 1: 63 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.828924 visibilities/baseline/integration-bin.
! Found source: J0512+2927
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 28200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0512+2927_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008018Jy  sigma=24.436555
! Fit after  self-cal, rms=0.912096Jy  sigma=22.086632
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7031 mas, bmaj=1.442 mas, bpa=-2.463 degrees
! Estimated noise=0.377011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0649906 Jy
! Component: 100  -  total flux cleaned = 0.0818822 Jy
! Total flux subtracted in 100 components = 0.0818822 Jy
! Clean residual min=-0.003998 max=0.008195 Jy/beam
! Clean residual mean=0.000000 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.0818822 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0818822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063812Jy  sigma=1.438961
! Fit after  self-cal, rms=0.063552Jy  sigma=1.432753
! Inverting map 
! Added new window around map position (-1.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00924368 Jy
! Component: 100  -  total flux cleaned = 0.0149858 Jy
! Total flux subtracted in 100 components = 0.0149858 Jy
! Clean residual min=-0.002990 max=0.003524 Jy/beam
! Clean residual mean=0.000000 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.096868 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.096868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061441Jy  sigma=1.377770
! Fit after  self-cal, rms=0.061378Jy  sigma=1.376187
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444928 Jy
! Component: 100  -  total flux cleaned = 0.00732293 Jy
! Total flux subtracted in 100 components = 0.00732293 Jy
! Clean residual min=-0.002615 max=0.003339 Jy/beam
! Clean residual mean=0.000000 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.104191 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.104191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060827Jy  sigma=1.361894
! Fit after  self-cal, rms=0.060806Jy  sigma=1.361382
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9547 mas, bmaj=1.832 mas, bpa=-2.209 degrees
! Estimated noise=0.181173 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00494462 Jy
! Component: 100  -  total flux cleaned = 0.00796571 Jy
! Component: 150  -  total flux cleaned = 0.0100925 Jy
! Component: 200  -  total flux cleaned = 0.0116614 Jy
! Total flux subtracted in 200 components = 0.0116614 Jy
! Clean residual min=-0.001709 max=0.002418 Jy/beam
! Clean residual mean=-0.000004 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.115852 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 52 components and 0.115852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060354Jy  sigma=1.349675
! Fit after  self-cal, rms=0.060311Jy  sigma=1.348465
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9547 x 1.832 at -2.209 degrees (North through East)
! Clean map  min=-0.0015503  max=0.087603 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.07     NL        1.04     OV        1.02     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        0.97     
!   LA        1.01     MK        1.10     NL        1.03     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.93     KP        1.02     
!   LA        0.96     MK        1.04     NL        1.05     OV        1.01     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.87     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.06     OV        1.00     
!   PT        0.93     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.95     KP        0.97     
!   LA        1.01     MK        1.01     NL        1.00     OV        1.02     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.95     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.04     OV        1.03     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.94     KP        0.98     
!   LA        0.99     MK        1.04     NL        1.00     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.93     KP        1.01     
!   LA        0.98     MK        1.02     NL        0.97     OV        1.00     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.05     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.98     KP        1.06     
!   LA        1.00     MK        1.01     NL        0.98     OV        1.00     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.90     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.95     KP        0.96     
!   LA        1.01     MK        1.00     NL        1.02     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.060311Jy  sigma=1.348465
! Fit after  self-cal, rms=0.058990Jy  sigma=1.345059
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9583 mas, bmaj=1.831 mas, bpa=-2.074 degrees
! Estimated noise=0.179065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.4, -6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212878 Jy
! Component: 100  -  total flux cleaned = 0.00359621 Jy
! Component: 150  -  total flux cleaned = 0.00474847 Jy
! Component: 200  -  total flux cleaned = 0.00567516 Jy
! Total flux subtracted in 200 components = 0.00567516 Jy
! Clean residual min=-0.001058 max=0.001193 Jy/beam
! Clean residual mean=-0.000001 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.121527 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 80 components and 0.121527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058887Jy  sigma=1.342471
! Fit after  self-cal, rms=0.058873Jy  sigma=1.342276
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058873Jy  sigma=1.342276
! Fit after  self-cal, rms=0.058835Jy  sigma=1.340266
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9562 mas, bmaj=1.833 mas, bpa=-2.179 degrees
! Estimated noise=0.179182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000933284 Jy
! Component: 100  -  total flux cleaned = 0.00164704 Jy
! Component: 150  -  total flux cleaned = 0.00212581 Jy
! Component: 200  -  total flux cleaned = 0.00249545 Jy
! Total flux subtracted in 200 components = 0.00249545 Jy
! Clean residual min=-0.000867 max=0.001020 Jy/beam
! Clean residual mean=-0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.124023 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 96 components and 0.124023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058811Jy  sigma=1.339716
! Fit after  self-cal, rms=0.058813Jy  sigma=1.339638
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000403722 Jy
! Component: 100  -  total flux cleaned = 0.000662225 Jy
! Component: 150  -  total flux cleaned = 0.00086255 Jy
! Component: 200  -  total flux cleaned = 0.000961204 Jy
! Total flux subtracted in 200 components = 0.000961204 Jy
! Clean residual min=-0.000840 max=0.000979 Jy/beam
! Clean residual mean=-0.000000 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.124984 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 113 components and 0.124984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058804Jy  sigma=1.339444
! Fit after  self-cal, rms=0.058803Jy  sigma=1.339438
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058803Jy  sigma=1.339438
! Fit after  self-cal, rms=0.058682Jy  sigma=1.339392
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.955 mas, bmaj=1.832 mas, bpa=-2.218 degrees
! Estimated noise=0.179053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411805 Jy
! Component: 100  -  total flux cleaned = 0.000555195 Jy
! Component: 150  -  total flux cleaned = 0.000631285 Jy
! Component: 200  -  total flux cleaned = 0.000713715 Jy
! Total flux subtracted in 200 components = 0.000713715 Jy
! Clean residual min=-0.000827 max=0.000959 Jy/beam
! Clean residual mean=-0.000000 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.125698 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 121 components and 0.125698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058675Jy  sigma=1.339251
! Fit after  self-cal, rms=0.058672Jy  sigma=1.339237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127313 Jy
! Component: 100  -  total flux cleaned = 0.000184322 Jy
! Component: 150  -  total flux cleaned = 0.000247268 Jy
! Component: 200  -  total flux cleaned = 0.000276442 Jy
! Total flux subtracted in 200 components = 0.000276442 Jy
! Clean residual min=-0.000829 max=0.000949 Jy/beam
! Clean residual mean=-0.000000 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.125974 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 130 components and 0.125974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058669Jy  sigma=1.339158
! Fit after  self-cal, rms=0.058668Jy  sigma=1.339155
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058668Jy  sigma=1.339155
! Fit after  self-cal, rms=0.058602Jy  sigma=1.339133
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.115 mas, bmaj=2.746 mas, bpa=-0.398 degrees
! Estimated noise=0.222172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004495 Jy
! Component: 100  -  total flux cleaned = 0.000739078 Jy
! Component: 150  -  total flux cleaned = 0.000874465 Jy
! Component: 200  -  total flux cleaned = 0.000928897 Jy
! Total flux subtracted in 200 components = 0.000928897 Jy
! Clean residual min=-0.001093 max=0.001066 Jy/beam
! Clean residual mean=-0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.126903 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 145 components and 0.126903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058599Jy  sigma=1.339084
! Fit after  self-cal, rms=0.058598Jy  sigma=1.339073
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117782 Jy
! Component: 100  -  total flux cleaned = 0.000133402 Jy
! Component: 150  -  total flux cleaned = 0.000168961 Jy
! Component: 200  -  total flux cleaned = 0.000195232 Jy
! Total flux subtracted in 200 components = 0.000195232 Jy
! Clean residual min=-0.001078 max=0.001058 Jy/beam
! Clean residual mean=-0.000000 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.127098 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 151 components and 0.127098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058596Jy  sigma=1.339054
! Fit after  self-cal, rms=0.058596Jy  sigma=1.339046
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9541 mas, bmaj=1.833 mas, bpa=-2.273 degrees
! Estimated noise=0.178969 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9541 x 1.833 at -2.273 degrees (North through East)
! Clean map  min=-0.00077891  max=0.086079 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7032 mas, bmaj=1.447 mas, bpa=-2.607 degrees
! Estimated noise=0.372135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0640106 Jy
! Component: 100  -  total flux cleaned = 0.0820716 Jy
! Component: 150  -  total flux cleaned = 0.0918127 Jy
! Component: 200  -  total flux cleaned = 0.0978195 Jy
! Total flux subtracted in 200 components = 0.0978195 Jy
! Clean residual min=-0.002570 max=0.003359 Jy/beam
! Clean residual mean=0.000001 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.0978195 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0978195 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9541 mas, bmaj=1.833 mas, bpa=-2.273 degrees
! Estimated noise=0.178969 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00707777 Jy
! Component: 100  -  total flux cleaned = 0.0116421 Jy
! Component: 150  -  total flux cleaned = 0.0148082 Jy
! Component: 200  -  total flux cleaned = 0.0171813 Jy
! Total flux subtracted in 200 components = 0.0171813 Jy
! Clean residual min=-0.001299 max=0.001495 Jy/beam
! Clean residual mean=-0.000002 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.115001 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 58 components and 0.115001 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.115 mas, bmaj=2.746 mas, bpa=-0.398 degrees
! Estimated noise=0.222172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00318286 Jy
! Component: 100  -  total flux cleaned = 0.00538113 Jy
! Component: 150  -  total flux cleaned = 0.00699754 Jy
! Component: 200  -  total flux cleaned = 0.00820227 Jy
! Total flux subtracted in 200 components = 0.00820227 Jy
! Clean residual min=-0.001162 max=0.001035 Jy/beam
! Clean residual mean=-0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.123203 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000914249 Jy
! Component: 100  -  total flux cleaned = 0.00163492 Jy
! Component: 150  -  total flux cleaned = 0.00221135 Jy
! Component: 200  -  total flux cleaned = 0.00267619 Jy
! Total flux subtracted in 200 components = 0.00267619 Jy
! Clean residual min=-0.001109 max=0.001038 Jy/beam
! Clean residual mean=-0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.125879 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 136 components and 0.125879 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9541 mas, bmaj=1.833 mas, bpa=-2.273 degrees
! Estimated noise=0.178969 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000383197 Jy
! Component: 100  -  total flux cleaned = 0.000469778 Jy
! Component: 150  -  total flux cleaned = 0.000547391 Jy
! Component: 200  -  total flux cleaned = 0.000590511 Jy
! Total flux subtracted in 200 components = 0.000590511 Jy
! Clean residual min=-0.000947 max=0.000936 Jy/beam
! Clean residual mean=-0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.12647 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 153 components and 0.12647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058609Jy  sigma=1.339255
! Fit after  self-cal, rms=0.058608Jy  sigma=1.339150
wmodel /J0512+2927_X_map.mod
! wmodel: Unable to open new model file: /J0512+2927_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J0512+2927_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9541 x 1.833 at -2.273 degrees (North through East)
! Clean map  min=-0.000838  max=0.085813 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J0512+2927_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0858132 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000221086 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.772908 0.772908 1.54582 3.09163 6.18326 12.3665 24.7331 49.4661 98.9322
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.085 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  388.144 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J0512+2927_X_dfm.log closed on Thu May 19 22:08:48 2016